@article{CTT100611694,
  author = {Tomohisa Tanaka and Ryo Suzuki and Jiang Zhu and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2010,
}

@article{CTT100609835,
  author = {TOMOHISA TANAKA and Masahiro Komori and JIANG ZHU and YOSHIO SAITO},
  title = {Development of Flexible Worktable for Endmilling Based on Parallel Mechanism},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609834,
  author = {JIANG ZHU and Keisuke Nomura and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Planning Assist System for Freeform Surface Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609833,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@inproceedings{CTT100615871,
  author = {Jiang Zhu and Keisuke Nomura and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh},
  booktitle = {Proceeding of the 14th International Conference on Mechatronics Technology},
  year = 2010,
}

@inproceedings{CTT100617994,
  author = {Kengo Shintaku and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed},
  booktitle = {Proceeding of the 8th Manufacturing & Machine Tool Conference},
  year = 2010,
}

@inproceedings{CTT100614418,
  author = {Shota Sekiguchi and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Freeform Surface Machining and Measurement by 8-axis Robot System},
  booktitle = {Proceedings of the 14th International Machine Tool Egineers' Conference},
  year = 2010,
}

@inproceedings{CTT100612497,
  author = {Koji Nishiyama and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Generation for 2.5-Axis Contour Machining},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}

@inproceedings{CTT100611645,
  author = {Takahiro Kubo and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition},
  booktitle = {Proceeding of Abrasive Technoloogy Conference 2010},
  year = 2010,
}

@inproceedings{CTT100600908,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  booktitle = {日本機械学会北陸信越支部第47期総会・講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601112,
  author = {Masahiro Komori and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}

@inproceedings{CTT100601111,
  author = {Keisuke Nomura and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {High-efficiency Processing for Turning Center by Using Multi-resolution Mesh},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010},
  year = 2010,
}