@book{CTT100801626,
author = {Takayama, Y. and Shibayanagi, T. and Matsuda, K. and Tsuchida, T. and SHINJI KUMAI and Umezawa, O. and Sato, T.},
title = {Special issue on aluminium alloys 2010: Preface},
publisher = {},
year = 2011,
}
@article{CTT100634025,
author = {SHINJI KUMAI},
title = {Joining behavior and joint interface morphology of seam-welded multi-layer aluminum plates by magnetic pressure},
journal = {軽金属溶接},
year = 2011,
}
@article{CTT100802043,
author = {馮 科研 and 渡邉 満洋 and SHINJI KUMAI},
title = {6022アルミニウム合金板/めっき鋼板摩擦攪拌スポット接合材のミクロ組織と接合強度},
journal = {軽金属},
year = 2011,
}
@article{CTT100634026,
author = {SHINJI KUMAI},
title = {衝撃圧着時のメタルジェット放出および接合界面形態に関する数値解析ならびに実験的検討},
journal = {軽金属},
year = 2011,
}
@article{CTT100634051,
author = {SHINJI KUMAI},
title = {Microstructure and joint Strength of Friction Stir Spot Welded 6022 aluminum Alloy Sheets and Plated Steel sheets},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634047,
author = {SHINJI KUMAI},
title = {Al-5.5%Mg-2.3%Si-0.6%MnおよびAl-13%Mg2Si擬二元系合金の第二相粒子形態と引裂靭性の及ぼす凝固中の冷却速度の影響},
journal = {軽金属},
year = 2011,
}
@article{CTT100634049,
author = {SHINJI KUMAI},
title = {Simulation and Experimental Analysis of Metal Jet Emission and weld Interface Morphology in Impact Welding},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634029,
author = {SHINJI KUMAI},
title = {Advanced High-Speed Solid-State Joining of 2024 Aluminum Alloy Studs to 5052 Aluminum Alloy Plates},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634032,
author = {SHINJI KUMAI},
title = {新しい高速固相接合法による2024アルミニウム合金製スタッドと5052アルミニウム合金板の接合},
journal = {軽金属},
year = 2011,
}
@article{CTT100634039,
author = {SHINJI KUMAI},
title = {Growth Manner of Intermetallic Compound Layer Produced at Welding Interface of Friction Stir Spot Welded Aluminum/Steel Lap Joint},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634041,
author = {SHINJI KUMAI},
title = {Effect of Si Content on Strip Thickness and solidified Structure in High-Speed Twin-Roll ast Al-Si Alloy Strips},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634044,
author = {SHINJI KUMAI},
title = {Effect of Cooling Rates during Solidification of Al-5.5%Mg-2.3%Si-0.6%Mn and Al-13%Mg2Si Pseudo-Binary Alloys on Their Secondary-Particle Morphology and Tear Toughness},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100801831,
author = {米原 牧子 and SHINJI KUMAI and 磯野 宏秋 and 杉林 俊雄},
title = {金属表面のテクスチャ評価指標 : 表面性状が光沢度および表面色に及ぼす影響},
journal = {実験力学 : journal of JSEM},
year = 2011,
}
@article{CTT100634027,
author = {SHINJI KUMAI},
title = {電子ビーム溶接したNi基超合金/合金鋼異材接合部のミクロ組織と引張強度},
journal = {溶接学会論文集},
year = 2011,
}
@article{CTT100633121,
author = {Y. Harada and S. Tamura and S. Kumai},
title = {Effects of High-Temperature Solutionizing on Microstructure and Tear Toughness of A356 Cast Aluminum Alloy},
journal = {Materials Transactions},
year = 2011,
}
@article{CTT100634853,
author = {SHINJI KUMAI},
title = {Casting of aluminum alloy clad strip using a roll caster},
journal = {Journal of solid mechanics and materials engineering},
year = 2011,
}
@article{CTT100634854,
author = {SHINJI KUMAI},
title = {Casting of wire inserted strip using a twin roll caster equipped with two nozzles},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100634855,
author = {SHINJI KUMAI},
title = {Effect of Si content of Al-Si matrix on roll cast wire inseted strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638482,
author = {SHINJI KUMAI},
title = {Effect of some factors on fabrication of clad strip by a roll caster},
journal = {Advanced Material Research},
year = 2011,
}
@article{CTT100638485,
author = {SHINJI KUMAI},
title = {Strip casting of 6061 and recycled 6061 alloy by an unequal diameter twin roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638486,
author = {SHINJI KUMAI},
title = {Roll casting of Al-40%Sn-1%Cu alloy strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638487,
author = {SHINJI KUMAI},
title = {Casting of Al-25%Si strip using a vertical type twin roll caster},
journal = {Advanced Materials Reseach},
year = 2011,
}
@article{CTT100638488,
author = {SHINJI KUMAI},
title = {Clad strip casting by a roll caster},
journal = {Applied Mechanics and Materials},
year = 2011,
}
@article{CTT100638489,
author = {SHINJI KUMAI},
title = {Casting of clad strip by a roll caster},
journal = {Materials Science Forum},
year = 2011,
}
@article{CTT100638490,
author = {SHINJI KUMAI},
title = {Roll casting of Al-SiCp strip},
journal = {Materials Science Forum},
year = 2011,
}
@article{CTT100638491,
author = {SHINJI KUMAI},
title = {Clad strip casting using a twin roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638492,
author = {SHINJI KUMAI},
title = {Improvement of porosity of strip using a scraper on the casting by a vertical type high speed roll caster},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638493,
author = {SHINJI KUMAI},
title = {High speed twin roll casting of Al-Mg alloys},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100638506,
author = {SHINJI KUMAI},
title = {Casting of net inserted aluminum alloy composite strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100801713,
author = {Haga, T. and Takahashi, K. and SHINJI KUMAI and Watari, H.},
title = {Roll casting of a wire inserted strip},
journal = {Advanced Materials Research},
year = 2011,
}
@article{CTT100801982,
author = {中村 亮司 and 羽賀 俊雄 and SHINJI KUMAI and 渡利 久規},
title = {クラッド材作製用縦型タンデム双ロールキャスターの特性},
journal = {日本機械学会論文集 A編},
year = 2011,
}
@article{CTT100802070,
author = {秋津 和哉 and 羽賀 俊雄 and SHINJI KUMAI and 渡利 久規},
title = {スクレイパーを用いたロールキャスターによるアルミニウム合金板の作製},
journal = {日本機械学会論文集 A編},
year = 2011,
}
@article{CTT100633120,
author = {Yohei Harada and Shinichi Tamura and SHINJI KUMAI},
title = {A356アルミニウム合金鋳物の組織と引裂靭性に及ぼす高温溶体化処理の影響},
journal = {軽金属},
year = 2011,
}
@inproceedings{CTT100633137,
author = {Yohei Harada and SHINJI KUMAI},
title = {AZ80Mg合金の耐食性と時効硬化特性に及ぼすゾル-ゲル法によるCeO2製膜の影響},
booktitle = {講演概要CD},
year = 2011,
}
@inproceedings{CTT100802174,
author = {SHINJI KUMAI},
title = {超高速傾斜衝突を利用した同種・異種金属の固相接合},
booktitle = {全国講演大会講演論文集},
year = 2011,
}
@inproceedings{CTT100633134,
author = {Yuichi Tanaka and Ryoji Nakamura and 羽賀俊雄 and Yohei Harada and SHINJI KUMAI},
title = {タンデム式縦型双ロールキャスト法で作製した3000系/4000系アルミニウム合金クラッド材の接合界面組織},
booktitle = {講演概要CD},
year = 2011,
}
@inproceedings{CTT100633136,
author = {Yohei Harada and SHINJI KUMAI},
title = {AZ80マグネシウム合金の時効硬化とゾル-ゲル法を用いた耐食性の同時付与},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633139,
author = {Ryoji Nakamura and Yuichi Tanaka and 羽賀俊雄 and Yohei Harada and SHINJI KUMAI},
title = {タンデム式縦型双ロールキャスターにより鋳造した3000系/4000系アルミニウム合金クラッド材のミクロ組織},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633138,
author = {Daisuke Shimosaka and Yohei Harada and SHINJI KUMAI},
title = {Al-13%Mg2Si疑二元系共晶合金の共晶相形態と機械的性質におよぼす冷却速度の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633143,
author = {Yohei Harada and SHINJI KUMAI},
title = {ゾルーゲル法によりCeO2製膜したAZ80マグネシウム合金の耐食性と時効硬化特性},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633141,
author = {unknown unknown and Yoshie Kunimoto and Yohei Harada and SHINJI KUMAI},
title = {高速双ロールキャストしたAl-Si合金板材中央部の帯状組織に及ぼすSi組成の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633142,
author = {Daisuke Shimosaka and Takeshi Hoshino and Yohei Harada and SHINJI KUMAI},
title = {Al-11%Si-2.5%Cu合金の組織と機械的性質に及ぼす高速双ロールキャストによる急冷凝固の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633144,
author = {unknown unknown and Yoshie Kunimoto and Yohei Harada and SHINJI KUMAI},
title = {Al-Si合金高速双ロールキャスト材の凝固組織に及ぼすSi組成とロール荷重の影響},
booktitle = {講演概要集},
year = 2011,
}
@inproceedings{CTT100633145,
author = {Kento Takaya and Yohei Harada and SHINJI KUMAI},
title = {2024アルミニウム合金スタッドピンと6N01アルミニウム合金押出材の高速固相接合},
booktitle = {},
year = 2011,
}
@inproceedings{CTT100633146,
author = {KEYAN FENG and Yohei Harada and SHINJI KUMAI},
title = {摩擦撹拌スポット接合したアルミニウム合金板/GAめっき鋼板の接合界面組織},
booktitle = {},
year = 2011,
}
@inproceedings{CTT100802282,
author = {金 民錫 and SHINJI KUMAI},
title = {高速双ロールキャストしたAl-2wt%Si合金板材中央部の帯状組織に及ぼす鋳造条件の影響},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802009,
author = {秋津 和哉 and 鎌倉 圭佑 and 羽賀 俊雄 and SHINJI KUMAI and 渡利 久規},
title = {スクレイパーを用いた単ロール法によるアルミニウム合金板の鋳造},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802176,
author = {羽賀 俊雄 and 秋津 和哉 and 山崎 雄允 and SHINJI KUMAI and 渡利 久規},
title = {Al-SiCp合金の高速ロールキャスティング},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@inproceedings{CTT100802243,
author = {中村 亮司 and 新地 和弘 and 羽賀 俊雄 and SHINJI KUMAI},
title = {縦型タンデム双ロールキャスターにより鋳造したアルミニウム合金クラッド材},
booktitle = {鋳造工学 全国講演大会講演概要集},
year = 2011,
}
@misc{CTT100638670,
author = {SHINJI KUMAI},
title = {研究、製造技術の歩みと展望 溶解・凝固・鋳造},
year = 2011,
}