|
Publication List - SHINJI KUMAI 2018 (23 / 677 entries)
Journal Paper
-
Tomoo Goda,
Shinji Kumai.
Microstructure and Elongation Anisotropy of Cold Rolled and solution Treated A356 Alloy Strips Fabricated via High-Speed Twin-Roll Casting,
Materials Transactions,
Vol. 59,
No. 11,
pp. 1777 to 1783,
Nov. 2018.
-
Mitsuhiro Watanabe,
Kentaro Ishiuchi,
Shinji Kumai.
Interfacial Microstructure and Hardness of Magnetic Pulse Welded Copper/Nickel Lap Joint,
Materials Transactions,
Vol. 59,
No. 3,
pp. 425 to 431,
Mar. 2018.
-
R. Song,
Y. Harada,
S. Kumai.
Influence of cooling rate on primary particle and solute distribution in high-speed twin-roll cast Al-Mn based alloy strip,
Materials Transactions,
Vol. 59,
No. 1,
pp. 110-116,
Jan. 2018.
-
Shinji Kumai.
Impact Joining of Dissimila Metals,
溶接学会誌,
Vol. 87,
No. 1,
pp. 48 - 56,
Jan. 2018.
International Conference (Reviewed)
-
Ram Song,
Shinji Muraishi,
Shinji Kumai.
EFFECT OF COOLING RATE ON CONSTITUENT PARTICLE FORMATION IN HIGH-SPEED TWIN-ROLL CAST Al-Mn BASED ALLOY STRIPS,
The 73rd World Foundry Congress,
Congress Proceedings of the 73rd World Foundry Congress,
pp. 35 - 36,
Sept. 2018.
-
Shinji Kumai,
Yusuke Takayama.
DEVEROPMENT OF IN SITU FABRICATION PROCESS OF CLAD MATERIALS BY USING TANDEM TWIN-ROLL CASTING,
The 73rd World Foundry Congress,
Congress Proceedings of the 73rd World Foundry Congress,
pp. 105 - 106,
Sept. 2018.
-
Mitsuhiro Watanabe,
Shinji Kumai.
Dissimilar Metal Joining of Aluminum and Copper Plates Using Magnetic Pulse Welding and Their Joint Strength,
The 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18),
Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18),
pp. MMME 118-1 to MMME118-5,
Aug. 2018.
-
Shinji Kumai,
Junto Nishiwaki.
Formation Mechanism and Control of Impact Welded Interface in Dissimilar Metal Joints,
The 16th International Conference on Aluminum Alloys (ICAA16),
Proceedings of 2018ICAA16,
June 2018.
-
Ram Song,
Kazuho Otsuka,
Yohei Harada,
Shinji Kumai.
Influence of Cooling Rates on Microstructure and Mn Supersaturation in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strips,
The 16th International Conference on Aluminum Alloys,
Proceedings of 2018ICAA16,
June 2018.
-
Takashi Kambe,
Yasutaka Kedo,
Shinji Muraishi,
Shinji Kumai.
Numerical Analysis of Magnetic Pulse Forming and Deformation Structure of Pure Al and Cu Sheets,
The 16th International Conference on Aluminium Alloys (ICAA16),
Proceedings of 2018ICAA16,
June 2018.
Domestic Conference (Reviewed)
-
SHINJI KUMAI.
種々の手法を用いて作製した異種金属接合材の接合界面形態と熱履歴,
軽金属学会第135回秋期大会,
軽金属学会第135回秋期大会講演概要集,
pp. 70 - 71,
Nov. 2018.
-
Yusei Kawamura,
Yusuke Sano,
Yukako Ueda,
Mitsuhiro Watanabe,
SHINJI KUMAI.
電磁圧接したAl/鋼及びAl/Alめっき鋼板接合材の界面組織,
2018年度軽金属溶接協会年次講演大会,
June 2018.
Domestic Conference (Not reviewed / Unknown)
-
Nguyenha,
Ram Song,
Kazuho Otsuka,
Yohei Harada,
Shinji Muraishi,
SHINJI KUMAI.
Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips,
(一社)軽金属学会 第135回秋期大会,
講演概要集,
pp. 497-498,
Nov. 2018.
-
Maya Okihara,
Shinji Muraishi,
SHINJI KUMAI.
調質の異なるアルミニウム板を用いた電磁圧接材の接合界面,
軽金属学会第135回秋期大会,
軽金属学会第135回秋期大会講演概要集,
pp. 81 - 82,
Nov. 2018.
-
Keisuke Sano,
Yohei Harada,
Shinji Muraishi,
SHINJI KUMAI.
A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果,
(一社)軽金属学会 第135回秋期大会,
講演概要集,
pp. 433-434,
Nov. 2018.
-
Takashi Kambe,
Shinji Muraishi,
SHINJI KUMAI.
電磁圧接ならびに電磁成形したアルミニウム板の組織と変形挙動の数値解析,
軽金属学会第135回秋期大会,
軽金属学会第135回秋期大会講演概要集,
pp. 79 - 80,
Nov. 2018.
-
Tomohiro Ichikawa,
Yohei Harada,
SHINJI KUMAI.
タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si系合金クラッド材の皮材組織形成過程,
(公社)日本鋳造工学会 第172回全国講演大会,
講演概要集,
p. 65,
Oct. 2018.
-
Hiroki Shinohara,
Tomoo Goda,
Yohei Harada,
SHINJI KUMAI.
縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の組織と破断伸び異方性の低減,
(公社)日本鋳造工学会 第172回全国講演大会,
講演概要集,
p. 64,
Oct. 2018.
-
Takayuki Maruyama,
Yohei Harada,
SHINJI KUMAI.
タンデム式縦型高速双ロールキャスト法を用いた7072/3003/4045アルミニウム合金クラッド材の作製,
(公社)日本鋳造工学会 第172回全国講演大会,
講演概要集,
p. 66,
Oct. 2018.
-
Jiedi Li,
Takashi Kambe,
Daiki Yamagishi,
Shinji Muraishi,
SHINJI KUMAI.
数値解析を用いたAl/Fe電磁圧接界面に生成する中間層の再現,
2018年度 軽金属溶接協会 年次講演大会,
June 2018.
-
Yohei Harada,
Nan Jiang,
SHINJI KUMAI.
縦型高速双ロールキャスト法による高Mg含有高強度Al-Mg系合金薄板の作製,
(公社)日本鋳造工学会 第171回全国講演大会,
講演概要集,
p. 106,
May 2018.
-
Nan Jiang,
Yohei Harada,
SHINJI KUMAI.
縦型高速双ロールキャストしたAl-Mg合金板材の凝固組織と表面性状,
(公社)日本鋳造工学会 第171回全国講演大会,
講演概要集,
p. 105,
May 2018.
-
Kazuho Otsuka,
Yohei Harada,
Shinji Muraishi,
SHINJI KUMAI.
縦型高速双ロールキャスト材より作製したAl-1~4mass%Mn合金板の機械的特性,
(一社)軽金属学会 第134回春期大会,
講演概要集,
pp. 307-308,
May 2018.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|