@article{CTT100841910,
  author = {Arisa Torii and Hayato Yoshioka and Shingo Tajima and HIDENORI SHINNO},
  title = {ハイパースペクトルデータを用いためっき加工状態の認識および加工面の定量的評価},
  journal = {日本機械学会論文集},
  year = 2020,
}

@article{CTT100841909,
  author = {Asako Sakataya and Hayato Yoshioka and Shingo Tajima and HIDENORI SHINNO},
  title = {ファイバレーザを用いた鉄系材料に対する面取り},
  journal = {日本機械学会論文集},
  year = 2020,
}

@article{CTT100830285,
  author = {Hayato Yoshioka and Kotaro Kojima and Daisuke Toyota},
  title = {Micro patterning on curved surface with a fast tool servo system for micro milling process},
  journal = {CIRP Annals - Manufacturing Technology},
  year = 2020,
}

@article{CTT100822752,
  author = {Makoto KATO and Daisuke KONO and Hayato YOSHIOKA and Naohiko SUGITA and Akihide HAMAGUCHI and Kazumasa KONO and Kazunori IIJIMA and Yasuhiro KAKINUMA},
  title = {Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials},
  journal = {日本機械学会論文集},
  year = 2020,
}

@article{CTT100822751,
  author = {Yuta Showa and Hayato Yoshioka and Hidenori Shinno},
  title = {Reduction of the influence on machining surface caused by tool non-repeatable run-out of rolling bearing spindle for machine tools (Development of an excitation system)},
  journal = {日本機械学会論文集},
  year = 2020,
}

@inproceedings{CTT100837940,
  author = {Showa, Y. and Yoshioka, H.},
  title = {Reduction of the influence on machining surface caused by tool nonrepeatable run-out of rolling bearing spindle for machine tools –Evaluation of effectiveness of NRRO reduction on machining surface by an excitation system-},
  booktitle = {Proceedings of ICPE2020},
  year = 2020,
}

@inproceedings{CTT100837941,
  author = {Tajima, S. and Sencer, B. and Yoshioka, H.},
  title = {Kinematic smoothing for singularity avoidance in 5-axis machining},
  booktitle = {Proceedings of ICPE2020},
  year = 2020,
}

@inproceedings{CTT100831490,
  author = {Satoshi Iwamoto and Hayato Yoshioka and Shingo Tajima and HIDENORI SHINNO},
  title = {反力利用形カウンタウェイト機構における外乱応答特性},
  booktitle = {2020年度精密工学会秋季大会学術講演会講演論文集},
  year = 2020,
}

@inproceedings{CTT100831489,
  author = {Hayato Yoshioka and Junya Hashimoto and Shingo Tajima and HIDENORI SHINNO},
  title = {CFRPの繊維配向を考慮した工作機械テーブルの検討},
  booktitle = {2020年度精密工学会秋季大会学術講演会講演論文集},
  year = 2020,
}

@inproceedings{CTT100831491,
  author = {Naotoshi Oyama and Hayato Yoshioka and 奥山弥生 and Shingo Tajima and 江草 宏 and HIDENORI SHINNO},
  title = {光切断法を用いた人工歯形状評価法},
  booktitle = {2020年度精密工学会秋季大会学術講演会講演論文集},
  year = 2020,
}

@inproceedings{CTT100831488,
  author = {Yoshioka, H. and Saito, S. and Kato, J. and Shinno, H. and Goto, S. and Hori, N.},
  title = {Improvement of thermal deformation in a newly developed steel CFRP composite ball screw},
  booktitle = {Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)},
  year = 2020,
}

@inproceedings{CTT100831487,
  author = {Tajima, S. and Sencer, B. and Yoshioka, H. and Shinno, H.},
  title = {Smooth path blending for 5-axis machining},
  booktitle = {Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020)},
  year = 2020,
}