|
Publication List - Yu Sekiguchi 2019 (14 / 126 entries)
Journal Paper
-
Yu Sekiguchi,
Minori Nakanouchi,
Kosuke Haraga,
Ippei Takasaki,
Chiaki Sato.
Experimental investigation on strength of stepwise tailored single lap adhesive joint using second-generation acrylic adhesive via shear and low-cycle shear tests,
International Journal of Adhesion and Adhesives,
Elsevier,
Vol. 95,
102438,
Sept. 2019.
Official location
-
Yu Sekiguchi,
Ryo Sakakibara,
Chiaki Sato.
Buckling analysis of a beam on an elastic foundation considering initial imperfection,
Journal of the Adhesion Society of Japan,
The Adhesion Society of Japan,
Vol. 55,
No. 7,
pp. 254-265,
July 2019.
Official location
-
Katsuo Komatsu,
Yu Sekiguchi,
Ryohei Ihara,
Akihiko Tatsumi,
Chiaki Sato.
Experimental investigation of an adhesive fracture energy measurement by preventing plastic deformation of substrates in a double cantilever beam test,
The Journal of Adhesion,
Talor & Francis,
Vol. 95,
No. 10,
pp. 911-928,
July 2019.
-
Yu Sekiguchi.
Study on the reversible adhesion inspired from gecko foot hairs,
Journal of the Adhesion society of Japan,
The Adhesion Society of Japan,
Vol. 55,
No. 2,
pp. 50-56,
Feb. 2019.
Official location
-
Minori Nakanouchi,
Chiaki Sato,
Yu Sekiguchi,
Kosuke HARAGA,
Hiroki Uno.
Development of application method for fabricating functionally graded adhesive joints by two-component acrylic adhesives with different elastic moduli,
The Journal of Adhesion,
Talor & Francis,
Vol. 95,
pp. 529-542,
Feb. 2019.
Official location
International Conference (Not reviewed / Unknown)
-
Minori Nakanouchi,
T Yajima,
K Haraga,
H Uno,
Yu Sekiguchi,
Chiaki Sato.
Residual stress determination in SGA layer caused in curing process,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Asuka Hayashi,
Yu Sekiguchi,
Chiaki Sato.
Experimental investigation of curing condition effect on adhesive joints bonded with second generation acrylic adhesives,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Noriaki Okada,
Yu Sekiguchi,
Chiaki Sato.
Thermal buckling of hybrid joints with adhesive and mechanical fasteners,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Yu Sekiguchi,
Chiaki Sato.
Surface treatment ofhigh tensile strength steel with gas-free atmospheric-pressure plasma for welding of thermoplastics,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
Domestic Conference (Not reviewed / Unknown)
-
Shin Horiuchi,
Yu Sekiguchi,
Yoshiteru Ishibashi,
Masahiro Okamura,
Ippei Kuroda,
Akito Wakamatsu,
Shota Tezuka,
Kenji Tamaki,
Mitsuhiro Iwamoto,
Hideyuki Tamaki,
Shintaro Watanabe,
Ryo Otagaki,
Toru Furusawa,
Ryosuke Chikazawa,
Ryohei Ihara.
A research on failure prediction method for structural adhesives with CAE (Second Report),
2019 JSAE Annual Congress (Autumn),
自動車技術会2019年度秋季大会学術講演会講演予稿集,
Society of Automotive Engineers of Japan,
184,
Oct. 2019.
-
Yu Sekiguchi,
Chiaki Sato.
Experimental study of the effect of the adhesive layer thickness of acrylic structural adhesive on the energy release rate,
日本機械学会 材料力学部門 若手シンポジウム2019,
日本機械学会材料力学部門M&M若手シンポジウム2019講演論文集,
一般社団法人 日本機械学会 材料力学部門,
Aug. 2019.
Official location
-
Yu Sekiguchi,
Chiaki Sato.
Effect of elasto-plastic deformation of the adhesive layer in the DCB tests,
日本接着学会第57回年次大会,
日本接着学会第57回年次大会講演要旨集,
一般社団法人 日本接着学会,
103-104,
June 2019.
-
Shin Horiuchi,
Yu Sekiguchi,
Yoshiteru Ishibashi,
Masahiro Okamura,
Ippei Kuroda,
Akito Wakamatsu,
Shota Tezuka,
Kenji Tamaki,
Mitsuhiro Iwamoto,
Hideyuki Tamaki,
Shintaro Watanabe,
Ryo Otagaki,
Toru Furusawa,
Ryosuke Chikazawa,
Ryohei Ihara.
A research on failure prediction method for structural adhesives with CAE (First Report),
2019 JSAE Annual Congress (Spring),
自動車技術会2019年度春季大会学術講演会講演予稿集,
Society of Automotive Engineers of Japan,
325,
May 2019.
Other Publication
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|