@article{CTT100653338,
  author = {髙谷謙斗 and 原田陽平 and 熊井真次 and 北山健二},
  title = {高速固相接合した2024アルミニウム合金スタッドと6N01アルミニウム合金板の界面組織と機械的性質},
  journal = {軽金属},
  year = 2012,
}

@article{CTT100802178,
  author = {熊井真次 and 林田 慶祐},
  title = {プロジェクション形状改良による2024アルミニウム合金スタッド/5052アルミニウム合金薄板高速固相接合材の接合強度の向上},
  journal = {軽金属},
  year = 2012,
}

@article{CTT100639958,
  author = {Li Gao and Yohei Harada and Shinji Kumai},
  title = {Analysis of Microstructure Evolution and Precise Solid Fraction Evaluation of A356 Aluminum Alloy during Partial Re-Melting by a Color Etching Method},
  journal = {Journal of Materials Science},
  year = 2012,
}

@article{CTT100802195,
  author = {熊井真次 and 高谷 謙斗},
  title = {高速固相接合した2024アルミニウム合金スタッドと5052アルミニウム合金板の組織と強度に及ぼす板厚の影響},
  journal = {軽金属},
  year = 2012,
}

@article{CTT100638666,
  author = {SHINJI KUMAI},
  title = {Microstructural Characterization of Intermediate Layer Produced at aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding},
  journal = {Materials Transactions},
  year = 2012,
}

@article{CTT100639858,
  author = {SHINJI KUMAI},
  title = {Analysis of microstructure evolution and precise solid fraction evaluation of A356 aluminum alloy during partial re-melting by a color etching method},
  journal = {Jornal of Materials Science},
  year = 2012,
}

@article{CTT100638667,
  author = {熊井真次},
  title = {スクレイパを用いた単ロール法によるアルミニウム合金板の作製},
  journal = {軽金属},
  year = 2012,
}

@article{CTT100801697,
  author = {Yamashiki, T. and Haga, T. and SHINJI KUMAI and Watari, H.},
  title = {Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster},
  journal = {Applied Mechanics and Materials},
  year = 2012,
}

@article{CTT100801248,
  author = {Haga, T. and Akitsu, K. and Kamakura, K. and SHINJI KUMAI and Watari, H.},
  title = {Single roll caster equipped with a scraper},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100801111,
  author = {Haga, T. and SHINJI KUMAI and Watari, H.},
  title = {Strip casting of recycled aluminum alloys by a twin roll caster},
  journal = {Waste and Biomass Valorization},
  year = 2012,
}

@article{CTT100634848,
  author = {SHINJI KUMAI},
  title = {Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100634852,
  author = {SHINJI KUMAI},
  title = {Roll casting of recycled AA5182},
  journal = {Applied Mechanics and Materials},
  year = 2012,
}

@article{CTT100634851,
  author = {SHINJI KUMAI},
  title = {A single roll caster for aluminum alloy strip},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100634850,
  author = {SHINJI KUMAI},
  title = {Roll casting of clad strip},
  journal = {Materials Science forum},
  year = 2012,
}

@article{CTT100634849,
  author = {SHINJI KUMAI},
  title = {Strip casting of Al-25%Si alloy},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100801729,
  author = {Haga, T. and Komeda, K. and Mtsuoka, K. and SHINJI KUMAI and Watari, H.},
  title = {Effect of Si on AA5182 strip cast by a high speed twin roll caster},
  journal = {Applied Mechanics and Materials},
  year = 2012,
}

@inproceedings{CTT100802076,
  author = {石原 拓也 and 柘植 浩志 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {707 2層クラッド材を用いた半溶融成形},
  booktitle = {機械材料・材料加工技術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100801934,
  author = {山敷 拓也 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {715 高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響},
  booktitle = {機械材料・材料加工技術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100801918,
  author = {鎌倉 鎌倉 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {714 スクレイパーを装備した単ロール法によるアルミニウム合金薄板の作製},
  booktitle = {機械材料・材料加工技術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100802192,
  author = {山崎 雄允 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {702 高速双ロール法により作製したAl合金薄板のインライン圧延},
  booktitle = {機械材料・材料加工技術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100802269,
  author = {鎌倉 圭佑 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {半凝固温度域の広いAl合金の双ロールキャスティング},
  booktitle = {機械材料・材料加工技術講演会 M&P},
  year = 2012,
}

@inproceedings{CTT100653343,
  author = {中村亮司 and 原田陽平 and 熊井真次 and 羽賀俊雄 and 藤田和子 and 新倉昭男},
  title = {タンデム式縦型双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と機械的性質,軽金属学会},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100802208,
  author = {山敷 拓也 and 白川 祐樹 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {716 高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響},
  booktitle = {機械材料・材料加工技術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100801818,
  author = {石原 拓也 and 石井 啓太 and 柘植 浩志 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {縦型双ロールキャスターによるアルミニウム合金クラッド材の作製},
  booktitle = {機械材料・材料加工技術講演会 M&P},
  year = 2012,
}

@inproceedings{CTT100653342,
  author = {越川翔太 and 下坂大輔 and 原田陽平 and 熊井真次},
  title = {急冷凝固したAl-11%Si-2.5%Cu合金の曲げ特性に及ぼす共晶Si相形態の影響},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100653341,
  author = {長野新介 and 金民錫 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金板材の板厚中央部の組織に及ぼす鋳造条件の影響},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100653340,
  author = {Li Gao and Yohei Harada and SHINJI KUMAI},
  title = {Evaluation of Microstructure and Solid Fractions during Partial re-melting of A356 Aluminum Alloy by a Color Etching Method},
  booktitle = {講演概要CD},
  year = 2012,
}

@inproceedings{CTT100639851,
  author = {SHINJI KUMAI},
  title = {EFFECTS OF PLATE THICKNESS AND PROJECTION SHAPE ON THE MICROSTRUCTURE AND STRENGTH OF HIGH-SPEED SOLID-STATE JOINED 2024 ALLOY STUDS AND 5052 ALLOY PLATES},
  booktitle = {Proceddings of the 13th International Conference on Aluminum Alloys (ICAA13)},
  year = 2012,
}

@inproceedings{CTT100639382,
  author = {L. Gao and Y. Harada and S. Kumai},
  title = {Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100639383,
  author = {R. Nakamura and T. Haga and Y. Harada and S. Kumai},
  title = {Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100639381,
  author = {Y. Harada and Y. Sada and S. Kumai},
  title = {Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method},
  booktitle = {Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys)},
  year = 2012,
}

@inproceedings{CTT100639852,
  author = {SHINJI KUMAI},
  title = {JOINING OF 2024 ALUMINUM ALLOY STUD TO AX80 MAGNESIUM ALLOY EXTRUDED PLATE BY ADVANCED HIGH-SPEED SOLID-STATE METHOD},
  booktitle = {Proccedings of the 13th International Conference on Aluminum Alloys},
  year = 2012,
}

@inproceedings{CTT100639853,
  author = {SHINJI KUMAI},
  title = {Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Simila- and Dissimilar-Metal Plates},
  booktitle = {Proceedings of the 13th International Conference on Aluminum alloys (ICAA13)},
  year = 2012,
}

@inproceedings{CTT100639854,
  author = {SHINJI KUMAI},
  title = {SINGLE ROLL CASTER TO CAST ALUMINUM ALLOY STRIP},
  booktitle = {Procedings of the 13th International Conference of Aluminum Alloys (ICAA13)},
  year = 2012,
}

@inproceedings{CTT100639855,
  author = {SHINJI KUMAI},
  title = {MICROSTRUCTURE OF 3003/4045 ALUMINUM ALLOY CLAD STRIP FABRICATED BY VERTICAL TYPE TANDEM TWIN ROLL CASTER},
  booktitle = {Proceedings of the 13th International Conferece on Aluminum Alloys (ICAA13)},
  year = 2012,
}

@inproceedings{CTT100639856,
  author = {SHINJI KUMAI},
  title = {ANALYSIS OF DENDRITIC PRIMARY Al GRAIN RIPENING AND SOLID FRACTION MEASUREMENT IN A356 ALLOY SEMI-SOLID SLURRY USING SEGREGATION SENSITIVE REAGENT},
  booktitle = {Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13)},
  year = 2012,
}

@inproceedings{CTT100639917,
  author = {熊井真次},
  title = {タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織},
  booktitle = {軽金属学会第122回春期講演大会概要},
  year = 2012,
}

@inproceedings{CTT100638856,
  author = {佐田雄太郎 and 原田陽平 and 熊井真次},
  title = {高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100638857,
  author = {中村亮司 and 田中裕一 and 羽賀俊雄 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織},
  booktitle = {講演概要集},
  year = 2012,
}

@inproceedings{CTT100639913,
  author = {熊井真次},
  title = {スクレイバーを用いた改良型単ロール法によるアルミニウム合金板の作製},
  booktitle = {日本鋳造工学会第160回全国講演大会講演概要集},
  year = 2012,
}

@inproceedings{CTT100639914,
  author = {熊井真次},
  title = {高速ロールキャスティングにおけるサイドダムプレートの位置がバリの発生に与える影響},
  booktitle = {日本鋳造工学会第160回全国講演大会講演概要集},
  year = 2012,
}

@inproceedings{CTT100639915,
  author = {熊井真次},
  title = {6022アルミニウム合金板の摩擦攪拌スポット接合界面の組織と機械的性質に及ぼすプローブ底面形状の影響},
  booktitle = {軽金属学会第122回春期大会講演概要},
  year = 2012,
}

@inproceedings{CTT100639916,
  author = {熊井真次},
  title = {高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織},
  booktitle = {軽金属学会第122回春期大会講演概要},
  year = 2012,
}

@inproceedings{CTT100639918,
  author = {熊井真次},
  title = {縦型双ロールキャスターによるクラッド材の作製},
  booktitle = {軽金属学会第122回春期講演大会},
  year = 2012,
}

@inproceedings{CTT100802149,
  author = {山敷 拓也 and 藤野 暢人 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {高速双ロールキャスティングにおけるサイドダムプレートの位置がアルミニウム合金薄板エッジでのバリの発生に与える影響},
  booktitle = {鋳造工学 全国講演大会講演概要集},
  year = 2012,
}

@inproceedings{CTT100802249,
  author = {鎌倉 圭佑 and 羽賀 俊雄 and 熊井真次 and 渡利 久規},
  title = {半凝固温度範囲が広域なAl合金の双ロールキャスティング},
  booktitle = {鋳造工学 全国講演大会講演概要集},
  year = 2012,
}

@inproceedings{CTT100802316,
  author = {Haga, Toshio and Tsuge, Hiroshi and Ishihar, Takuya and SHINJI KUMAI and Watari, Hisaki},
  title = {ROLL CASTER TO CAST CLAD STRIPS},
  booktitle = {PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13)},
  year = 2012,
}