@article{CTT100777482,
  author = {Tomoo Goda and Shinji Kumai},
  title = {Microstructure and Elongation Anisotropy of Cold Rolled and solution Treated A356 Alloy Strips Fabricated via High-Speed Twin-Roll Casting},
  journal = {Materials Transactions},
  year = 2018,
}

@article{CTT100777428,
  author = {Mitsuhiro Watanabe and Kentaro Ishiuchi and Shinji Kumai},
  title = {Interfacial Microstructure and Hardness of Magnetic Pulse Welded Copper/Nickel Lap Joint},
  journal = {Materials Transactions},
  year = 2018,
}

@article{CTT100758186,
  author = {R. Song and Y. Harada and S. Kumai},
  title = {Influence of cooling rate on primary particle and solute distribution in high-speed twin-roll cast Al-Mn based alloy strip},
  journal = {Materials Transactions},
  year = 2018,
}

@article{CTT100777427,
  author = {熊井真次},
  title = {異種金属の衝撃圧接},
  journal = {溶接学会誌},
  year = 2018,
}

@inproceedings{CTT100777054,
  author = {Nguyenha and Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Muraishi and SHINJI KUMAI},
  title = {Mechanical properties of high manganese-containing 3xxx aluminum alloy sheets fabricated from high-speed twin-roll cast strips},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100777446,
  author = {沖原麻耶 and 村石信二 and 熊井真次},
  title = {調質の異なるアルミニウム板を用いた電磁圧接材の接合界面},
  booktitle = {軽金属学会第135回秋期大会講演概要集},
  year = 2018,
}

@inproceedings{CTT100777053,
  author = {佐野悠太 and 原田陽平 and 村石信二 and 熊井真次},
  title = {A7050アルミニウム合金の時効処理に伴う析出組織と硬さ変化に及ぼす二段時効の効果},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100777442,
  author = {熊井真次},
  title = {種々の手法を用いて作製した異種金属接合材の接合界面形態と熱履歴},
  booktitle = {軽金属学会第135回秋期大会講演概要集},
  year = 2018,
}

@inproceedings{CTT100777445,
  author = {神戸貴史 and 村石信二 and 熊井真次},
  title = {電磁圧接ならびに電磁成形したアルミニウム板の組織と変形挙動の数値解析},
  booktitle = {軽金属学会第135回秋期大会講演概要集},
  year = 2018,
}

@inproceedings{CTT100772640,
  author = {市川智祥 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法により作製したAl-Mn/Al-Si系合金クラッド材の皮材組織形成過程},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100772639,
  author = {篠原宏季 and 合田知男 and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャスト法により作製したAl-7%Si合金薄板の組織と破断伸び異方性の低減},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100772641,
  author = {丸山貴之 and 原田陽平 and 熊井真次},
  title = {タンデム式縦型高速双ロールキャスト法を用いた7072/3003/4045アルミニウム合金クラッド材の作製},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100777435,
  author = {Ram Song and Shinji Muraishi and Shinji Kumai},
  title = {EFFECT OF COOLING RATE ON CONSTITUENT PARTICLE FORMATION IN HIGH-SPEED TWIN-ROLL CAST Al-Mn BASED ALLOY STRIPS},
  booktitle = {Congress Proceedings of the 73rd World Foundry Congress},
  year = 2018,
}

@inproceedings{CTT100777432,
  author = {Shinji Kumai and Yusuke Takayama},
  title = {DEVEROPMENT OF IN SITU FABRICATION PROCESS OF CLAD MATERIALS BY USING TANDEM TWIN-ROLL CASTING},
  booktitle = {Congress Proceedings of the 73rd World Foundry Congress},
  year = 2018,
}

@inproceedings{CTT100777429,
  author = {Mitsuhiro Watanabe and Shinji Kumai},
  title = {Dissimilar Metal Joining of Aluminum and Copper Plates Using Magnetic Pulse Welding and Their Joint Strength},
  booktitle = {Proceedings of the 4th World Congress on Mechanical, Chemical, and Material Engineering (MCM'18)},
  year = 2018,
}

@inproceedings{CTT100777631,
  author = {Shinji Kumai and Junto Nishiwaki},
  title = {Formation Mechanism and Control of Impact Welded Interface in Dissimilar Metal Joints},
  booktitle = {Proceedings of 2018ICAA16},
  year = 2018,
}

@inproceedings{CTT100768958,
  author = {李杰迪 and 神戸貴史 and 山岸大起 and 村石信二 and 熊井真次},
  title = {数値解析を用いたAl/Fe電磁圧接界面に生成する中間層の再現},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100836368,
  author = {河村宥成 and 佐野 悠介 and 上田 結香子 and 渡邉満洋 and 熊井真次},
  title = {電磁圧接したAl/鋼及びAl/Alめっき鋼板接合材の界面組織},
  booktitle = {},
  year = 2018,
}

@inproceedings{CTT100777635,
  author = {Ram Song and Kazuho Otsuka and Yohei Harada and Shinji Kumai},
  title = {Influence of Cooling Rates on Microstructure and Mn Supersaturation in High-Speed Twin-Roll Cast Al-Mn Based Alloy Strips},
  booktitle = {Proceedings of 2018ICAA16},
  year = 2018,
}

@inproceedings{CTT100777633,
  author = {Takashi Kambe and Yasutaka Kedo and Shinji Muraishi and Shinji Kumai},
  title = {Numerical Analysis of Magnetic Pulse Forming and Deformation Structure of Pure Al and Cu Sheets},
  booktitle = {Proceedings of 2018ICAA16},
  year = 2018,
}

@inproceedings{CTT100767842,
  author = {原田陽平 and Nan Jiang and 熊井真次},
  title = {縦型高速双ロールキャスト法による高Mg含有高強度Al-Mg系合金薄板の作製},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100767841,
  author = {Nan Jiang and 原田陽平 and 熊井真次},
  title = {縦型高速双ロールキャストしたAl-Mg合金板材の凝固組織と表面性状},
  booktitle = {講演概要集},
  year = 2018,
}

@inproceedings{CTT100768025,
  author = {大塚一帆 and 原田陽平 and 村石信二 and 熊井真次},
  title = {縦型高速双ロールキャスト材より作製したAl-1～4mass%Mn合金板の機械的特性},
  booktitle = {講演概要集},
  year = 2018,
}