@book{CTT100803843,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka},
  title = {Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31},
  publisher = {Springer, Singapore},
  year = 2019,
}

@article{CTT100902938,
  author = {Hibiki Yamazaki and Jiang Zhu and Tomohisa Tanaka},
  title = {Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool},
  journal = {International Journal of Automation Technology},
  year = 2023,
}

@article{CTT100882419,
  author = {朱疆 and 田中智久},
  title = {定力制御バニシング工具を用いたマグネシウム合金の表面改質},
  journal = {砥粒加工学会誌},
  year = 2022,
}

@article{CTT100879966,
  author = {Yasunori Sakai and Ryo Kinouchi and Yuta Toki and Tomohisa Tanaka},
  title = {Novel non-traditional mechanical drilling process with squeeze motion},
  journal = {Materials Letters},
  year = 2021,
}

@article{CTT100845410,
  author = {Jiang Zhu and Da Xie and Tomohisa Tanaka},
  title = {Recognition of Multi-Intersecting Features of Boundary Representation CAD Model},
  journal = {Journal of Physics: Conference Series},
  year = 2021,
}

@article{CTT100879952,
  author = {Shigeru Aoki and Yasunori Sakai and Tomohisa Tanaka},
  title = {A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface},
  journal = {Information},
  year = 2020,
}

@article{CTT100879953,
  author = {Shigeru Aoki and Yasunori Sakai and Tomohisa Tanaka},
  title = {Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect)},
  journal = {Information},
  year = 2020,
}

@article{CTT100819961,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka and Dinh Ngoc Pham},
  title = {Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process},
  journal = {International Journal of Automation Technology},
  year = 2020,
}

@article{CTT100803846,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka and Fang-Jung Shiou and Shunichi Sawada and Hayato Yoshioka},
  title = {Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control},
  journal = {International Journal of Automation Technology},
  year = 2019,
}

@article{CTT100700214,
  author = {Muslimin and Jiang ZHU and Hayato YOSHIOKA and Tomohisa TANAKA and Yoshio SAITO},
  title = {Study on plane feature extraction in registration of laser scanning data sets for reverse engineering},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100699107,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the mechanism of laser forming to the thin stainless-steel wire},
  journal = {International Journal of Nanomanufacturing},
  year = 2015,
}

@article{CTT100696389,
  author = {Jiang ZHU and Masato KATO and Tomohisa TANAKA and Hayato YOSHIOKA and Yoshio SAITO},
  title = {Graph based automatic process planning system for multi-tasking machine},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100684117,
  author = {Yasunori SAKAI and Tomohisa TANAKA and Hayato YOSHIOKA and Jiang ZHU and Masaomi TSUTSUMI and Yoshio SAITO},
  title = {Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2015,
}

@article{CTT100677369,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100677370,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining},
  journal = {Advanced Materials Research},
  year = 2014,
}

@article{CTT100664707,
  author = {JIANG Zhu and AKIMITSU Hozumi and TOMOHISA Tanaka and Yoshio Saito},
  title = {High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100684266,
  author = {酒井康徳 and 田中智久 and 堤正臣},
  title = {直動転がり案内の振動特性に生じる加振力依存性},
  journal = {精密工学会誌},
  year = 2014,
}

@article{CTT100664709,
  author = {Yuanrui Zhang and Shigenobu Nagase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Positioning calibration of a parallel mechanism worktable with 6-DOF},
  journal = {Key Engineering Materials},
  year = 2014,
}

@article{CTT100663544,
  author = {TOMOHISA TANAKA and TSUNAMITSU NAKAHARA},
  title = {	A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear},
  journal = {Tribology online},
  year = 2013,
}

@article{CTT100645620,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable},
  journal = {Key Egineering Materials (Emerging Technology in Precision Engineering XIV)},
  year = 2012,
}

@article{CTT100641002,
  author = {Shunsuke Oike and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Robust Production Scheduling Using Autonomous Distributed Systems},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100641001,
  author = {Kohei Ogura and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA},
  journal = {Key Engineering Materials},
  year = 2012,
}

@article{CTT100634441,
  author = {Xiaoyi Wang and Jing Chen and Jiang Zhu and Yoshio Saito and Tomohisa Tanaka},
  title = {Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm},
  journal = {Advanced Materials Research},
  year = 2012,
}

@article{CTT100630821,
  author = {Jiang Zhu and Tomohisa TANAKA and Yoshio SAITO and Ryuta TANABE and Masaaki TAKENAKA and Toru FUKAMI},
  title = {On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2011,
}

@article{CTT100626163,
  author = {Jiang Zhu and Yuichi Takekuma and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction},
  journal = {Advanced Materials Research},
  year = 2011,
}

@article{CTT100620032,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito and Lining Sun},
  title = {Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation},
  journal = {International Journal of Design Engineering},
  year = 2011,
}

@article{CTT100611694,
  author = {Tomohisa Tanaka and Ryo Suzuki and Jiang Zhu and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2010,
}

@article{CTT100609833,
  author = {Yuusuke Narabu and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Manufacturing Feature Extraction of CAD Models for Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609835,
  author = {TOMOHISA TANAKA and Masahiro Komori and JIANG ZHU and YOSHIO SAITO},
  title = {Development of Flexible Worktable for Endmilling Based on Parallel Mechanism},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100609834,
  author = {JIANG ZHU and Keisuke Nomura and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Tool Path Planning Assist System for Freeform Surface Machining},
  journal = {Key Engineering Materials},
  year = 2010,
}

@article{CTT100565220,
  author = {JIANG ZHU and Ryo Suzuki and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2008,
}

@article{CTT100556173,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Advanced Mechanical Design, Systems, and Manufacturing},
  year = 2007,
}

@article{CTT100556172,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2007,
}

@article{CTT100533405,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Multi-resolution mesh for sculptured surface machining},
  journal = {Journal of Solid Mechanics and Materials Engineering},
  year = 2007,
}

@article{CTT100521983,
  author = {田中智久 and 齋藤義夫},
  title = {発泡スチロールの熱線加工メカニズム(熱線停止時の加工特性)},
  journal = {日本機械学会論文集(C編)},
  year = 2006,
}

@article{CTT100542122,
  author = {田中智久 and 飯田喜洋 and 齋藤義夫},
  title = {環境対応型工作機械用MQLオイルミスト濃度計測システムの試作},
  journal = {日本機械学会論文集(C編)},
  year = 2006,
}

@article{CTT100389525,
  author = {Javad AKBARI and Shinzo ENOMOTO and Kazuhiko KATO and Yoshiyuki YAKABE and Tomohisa TANAKA and Yoshio SAITO},
  title = {An Experimental Investigation on EDM Process Using a Desktop Machine Tool},
  journal = {Proceedings of ICoPE2003/2004},
  year = 2004,
}

@article{CTT100389094,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {高分子材料へのエキシマレーザアブレーション加工に関する研究},
  journal = {日本機械学会第5回生産加工･工作機械部門講演会講演論文集},
  year = 2004,
}

@article{CTT100389093,
  author = {ナフィス・アハマッド and 田中智久 and 齋藤義夫},
  title = {Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear},
  journal = {The 5th Manufacturing & Machine Tool Conference},
  year = 2004,
}

@article{CTT100496126,
  author = {深見徹 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {弾性変形拡張方式を利用したホーニングツールの開発},
  journal = {2003年度精密工学会秋季大会学術講演会講演論文集},
  year = 2003,
}

@article{CTT100496125,
  author = {J. Akbari and M.Imamura and T. Tanaka and Y. Saito},
  title = {Ultrasonic Tactile Sensor for Robot Gripper},
  journal = {Proceedings of the International Conference  on Leading Edge Manufacturing in 21st Century, Niigata},
  year = 2003,
}

@article{CTT100389017,
  author = {上原匠 and 田中智久 and 京極啓史 and 中原綱光},
  title = {摩耗モード遷移モデルの実験的検証},
  journal = {トライボロジー会議予稿集 東京 2003-5},
  year = 2003,
}

@article{CTT100496134,
  author = {小山田圭吾 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械の環境への2次的影響},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496132,
  author = {黄 士元 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496131,
  author = {今村光広 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {超音波センサ組み込みソフトフィンガによる把持状態の検出},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496130,
  author = {芦塚正博 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496129,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496128,
  author = {吉柳一郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {多軸ロボットによる自由曲面生成アルゴリズムの構築},
  journal = {2002年度精密工学会秋季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496127,
  author = {矢ヶ部善幸 and 山田洋維祐 and 田中智久 and アキバリ ジャワド and 斎藤義夫},
  title = {PC制御デスクトップマシンによる放電加工機},
  journal = {日本機械学会第4回生産加工･工作機械部門講演会講演論文集},
  year = 2002,
}

@article{CTT100496138,
  author = {坂谷内篤 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {ロボットの把持動作に関する学習制御},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496139,
  author = {歌田英司 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {超音波接触判定センサを持つロケータの開発},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496140,
  author = {Javad Akbari and Eiji Utada and Tomohisa Tanaka and Yoshio Saito},
  title = {Sensor Integrated Locator for Intelligent Fixture},
  journal = {Proceeding of 6th International Conference on Mechatronics Technology},
  year = 2002,
}

@article{CTT100496137,
  author = {杉田芳史 and 田中智久 and Javad Akbari and 斎藤義夫},
  title = {自由曲面形状の創成と計測に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496136,
  author = {前田陽介 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496135,
  author = {山中暁 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {環境対応型工作機械用ミストセンサの開発},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100496133,
  author = {牟田憲太郎 and 田中智久 and Akbari Javad and 斎藤義夫},
  title = {発泡スチロールの熱線加工メカニズムに関する研究},
  journal = {2002年度精密工学会春季大会学術講演会講演論文集},
  year = 2002,
}

@article{CTT100389016,
  author = {田中智久},
  title = {BURWELL-STRANGの概念による摩耗モード遷移臨界圧力に及ぼすすべりの影響 -二次元すべり線場理論による解析-},
  journal = {トライボロジスト},
  year = 2001,
}

@article{CTT100389019,
  author = {田中智久},
  title = {微小すべり下のマイルドからシビア摩耗への遷移判別 -凝着観察による-},
  journal = {トライボロジー会議予稿集 東京 2001-5},
  year = 2001,
}

@article{CTT100491007,
  author = {田中智久},
  title = {Burwell-Strangによる軽－重摩耗遷移の概念に基づく遷移臨界圧力の統計的解析},
  journal = {トライボロジスト},
  year = 2000,
}

@article{CTT100389015,
  author = {TOMOHISA TANAKA},
  title = {An Estimation of Threshold of Mild and Severe Wear Based on Burwell-Strang's Concept by ELastic-Plastic Analysis on Rough Surface Contact},
  journal = {Proceedings of the International Tribology Conference Nagasaki, 2000},
  year = 2000,
}

@article{CTT100389018,
  author = {田中智久},
  title = {カム-フォロワ間の熱的潤滑解析},
  journal = {日本機械学会第74期通常総会講演論文集},
  year = 1997,
}

@inproceedings{CTT100902936,
  author = {神谷凌孔 and 朱疆 and 田中智久},
  title = {転がりボールポイントツールを利用した薄板材料のバニ シング加工},
  booktitle = {2023年度砥粒加工学会学術講演会講演論文集},
  year = 2023,
}

@inproceedings{CTT100888679,
  author = {徳毛一瞭 and 朱疆 and 田中智久},
  title = {ワーク取付における位置・姿勢の3次元計測に基づくNC加工の高精度化},
  booktitle = {日本機械学会生産システム部門研究発表講演会2023講演論文集},
  year = 2023,
}

@inproceedings{CTT100884114,
  author = {hibiki yamazaki and jiang zhu and tomohisa tanaka},
  title = {Verification of the effectiveness of DSB tool in increasing the strength of thin plate material parts},
  booktitle = {Proceeding of the 19th International Conference on Precision Engineering},
  year = 2022,
}

@inproceedings{CTT100883812,
  author = {Hibiki Yamazaki and JIANG ZHU and TOMOHISA TANAKA},
  title = {Burnishing tool capable of surface modification of thin plate material},
  booktitle = {Proceeding of the IMEC2022},
  year = 2022,
}

@inproceedings{CTT100867995,
  author = {山﨑響 and 朱疆 and 田中智久},
  title = {DSBバニシング工具による金属薄板材料仕上げ加工の評価},
  booktitle = {2022年度精密工学会春季大会学術講演会論文集},
  year = 2022,
}

@inproceedings{CTT100867997,
  author = {森永雅也 and 田中智久 and 朱疆 and 大谷祐輔},
  title = {高機能なエンドミルの製造を可能にする複雑溝研削パス導出アルゴリズムの開発},
  booktitle = {生産システム部門研究発表講演会2022講演論文集},
  year = 2022,
}

@inproceedings{CTT100865756,
  author = {hibiki yamazaki and jiang zhu and tomohisa tanaka},
  title = {Development of a novel burnishing tool for surface modificatio of thin-walled materials},
  booktitle = {Proceeding of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2021,
}

@inproceedings{CTT100860868,
  author = {Muslimin and Katerina Mukti and Hasvienda M. Ridlwan and M. Sholeh and Ade Sumpena and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Direct NC Toolpath Generation from 3D Point Cloud Datasets},
  booktitle = {Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020)},
  year = 2021,
}

@inproceedings{CTT100845413,
  author = {森永雅也 and 田中智久 and 朱疆 and 大谷祐輔},
  title = {エンドミル溝部研削のための砥石の最適加工パラメータ導出アルゴリズム},
  booktitle = {生産システム部門研究発表講演会2021 講演論文集},
  year = 2021,
}

@inproceedings{CTT100833680,
  author = {Da Xie and Jiang Zhu and Tomohisa Tanaka},
  title = {Graph-based Feature Recognition and Combination Method for Automatic Process Planning System},
  booktitle = {Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing},
  year = 2020,
}

@inproceedings{CTT100813712,
  author = {Jiang Zhu and Chenyao Cao and Tomohisa Tanaka},
  title = {Corrosion Resistance Enhancement of Biodegradable Magnesium by Ball Burnishing Processing},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100803842,
  author = {Chenyao Cao and Jiang Zhu and Tomohisa Tanaka},
  title = {Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100879963,
  author = {青木 繁 and 酒井 康徳 and 田中 智久 and 劉 士豪},
  title = {高精度テクスチャを創生する超音波応用転写加工技術の開発:（基礎的実験）},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792224,
  author = {Cao Chenyao and 朱疆 and 田中智久 and 酒井康徳},
  title = {ボールバニシング加工の加工条件がマグネシウム合金の表面改質効果に及ぼす影響},
  booktitle = {2019年度精密工学会春季大会学術講演会講演論文集},
  year = 2019,
}

@inproceedings{CTT100879960,
  author = {青木 繁 and 酒井 康徳 and 田中 智久},
  title = {超音波振動応用加工例と塑性加工への応用の展望},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792225,
  author = {酒井康徳 and 田中智久 and 小林俊矢 and 朱疆},
  title = {異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答},
  booktitle = {},
  year = 2019,
}

@inproceedings{CTT100792221,
  author = {Shunnya Kobayashi and Yasunori Sakai and TOMOHISA TANAKA and JIANG ZHU},
  title = {Development of Structure Integrated Passive Damper (P-DACS)},
  booktitle = {Proceeding of the 18th International Machine Tool Engineers' Conference},
  year = 2018,
}

@inproceedings{CTT100792222,
  author = {Chenyao Cao and JIANG ZHU and TOMOHISA TANAKA and Yasunori Sakai},
  title = {Modification of Metal Structure Based on Burnishing Processing},
  booktitle = {Proceeding of the 18th International Machine Tool Engineers' Conference},
  year = 2018,
}

@inproceedings{CTT100768494,
  author = {呉境瑩 and 田中智久 and 朱疆 and 酒井康徳},
  title = {膜形成モード制御によるチタンへのレーザカラーリング},
  booktitle = {2018年度精密工学会春季大会学術講演会講演論文集},
  year = 2018,
}

@inproceedings{CTT100768495,
  author = {小林俊矢 and 酒井康徳 and 田中智久 and 朱疆},
  title = {金属と樹脂を複合した異方剛性を有するパッシブダンパの動特性に及ぼす幾何形状の影響},
  booktitle = {2018年度精密工学会春季大会学術講演会講演論文集},
  year = 2018,
}

@inproceedings{CTT100768493,
  author = {JIANG ZHU and Akira Tajima and TOMOHISA TANAKA and Hayato Yoshioka},
  title = {Study on the accuracy improvement for laser forming processing of micro-wire},
  booktitle = {Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2017,
}

@inproceedings{CTT100737651,
  author = {酒井康徳 and 田中智久 and 朱疆},
  title = {金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100737648,
  author = {堀田 駿介 and 吉岡 勇人 and 朱 疆 and 田中 智久},
  title = {チタンへのレーザ照射条件が表面性状及び発色に与える影響},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100737653,
  author = {井上悟史 and 酒井康徳 and 田中智久 and 吉岡勇人 and 朱疆 and 星出薫 and 古澤竜二},
  title = {静的状態での転がり 案内キャリッジに用 いる転動体の接触状 態の解明},
  booktitle = {2017年度精密工学会春季大会学術講演会講演論文集},
  year = 2017,
}

@inproceedings{CTT100734601,
  author = {Shunsuke Hotta and Jiang Zhu and Tomohisa Tanaka and Hayato Yoshioka},
  title = {Titanium Coloring Machining by Laser Irradiation},
  booktitle = {Proceedings of the 17th International Machine Tool Engineers` Conference},
  year = 2016,
}

@inproceedings{CTT100734599,
  author = {Yasunori Sakai and So Fukasawa and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Kaoru Hoshide and Ryuji Furusawa},
  title = {Influence of Designing Parameters on Vibration Damping of Rolling Guideway},
  booktitle = {Proceeding of 16th International Conference on Precision Engineering},
  year = 2016,
}

@inproceedings{CTT100734603,
  author = {Jiang Zhu and Shunsuke Hotta and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium},
  booktitle = {Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace},
  year = 2016,
}

@inproceedings{CTT100734600,
  author = {Shunsuke Hotta and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka},
  title = {Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium},
  booktitle = {Proceeding of 16th International Conference on Precision Engineering},
  year = 2016,
}

@inproceedings{CTT100734598,
  author = {酒井康徳 and 田中智久 and 朱疆},
  title = {熱硬化性樹脂の制振性に及ぼすフィラー条件の影響},
  booktitle = {第11回生産加工・工作機械部門講演会 講演論文集},
  year = 2016,
}

@inproceedings{CTT100757982,
  author = {Muslimin and Zhu, J. and Yoshioka, H. and Tanaka, T.},
  title = {Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering},
  booktitle = {Proceedings of International Symposium on Flexible Automation},
  year = 2016,
}

@inproceedings{CTT100702697,
  author = {田島彬 and 吉岡 勇人 and 朱 疆 and 田中智久},
  title = {金属極細線のレーザフォーミングにおける加工精度向上手法の研究},
  booktitle = {2016年度精密工学会春季大会学術講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702695,
  author = {酒井康徳 and 朱 疆 and 吉岡 勇人 and 田中 智久},
  title = {転がり案内の非線形な周波数応答に及ぼす潤滑油の影響},
  booktitle = {2016年度精密工学会春季大会学術講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702590,
  author = {堀田 駿介 and 吉岡 勇人 and 朱 疆 and 田中 智久},
  title = {YVO4レーザを用いたチタンへのカラーリング-加工条件と発色の関係-},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702589,
  author = {深澤奏 and 酒井康徳 and 朱 疆 and 吉岡 勇人 and 田中 智久 and 星出 薫 and 古澤竜二},
  title = {転動体の接触状態が転がり案内の減衰に及ぼす影響},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100702588,
  author = {酒井康徳 and 深澤奏 and 朱 疆 and 吉岡 勇人 and 田中 智久 and 星出 薫 and 古澤竜二},
  title = {転がり案内を模擬した接触減衰評価装置の試作},
  booktitle = {日本機械学会関東支部第22期総会講演会講演論文集},
  year = 2016,
}

@inproceedings{CTT100698665,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100698664,
  author = {Tomohisa Tanaka and Syo Harada and Jiang Zhu and Hayato Yoshioka and Yoshio Saito},
  title = {Fundamental Study for Control of Hue and Brightness in the Laser Coloring},
  booktitle = {Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century},
  year = 2015,
}

@inproceedings{CTT100696387,
  author = {Jiang Zhu and Masato Kato and Hayato Yoshioka and Yoshio Saito and Tomohisa Tanaka},
  title = {Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine},
  booktitle = {Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015)},
  year = 2015,
}

@inproceedings{CTT100696719,
  author = {酒井康徳 and 朱 and 吉岡勇人 and 田中智久},
  title = {有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定},
  booktitle = {},
  year = 2015,
}

@inproceedings{CTT100684116,
  author = {Muslimin and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684114,
  author = {Saurabh Bhide and Jiang Zhu and Hayato Yoshioka and Tomohisa Tanaka and Yoshio Saito},
  title = {Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015},
  year = 2015,
}

@inproceedings{CTT100684112,
  author = {原幹也 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {切削条件がPTFEの加工面精度に与える影響に関する研究},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684105,
  author = {加藤雅人 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {グラフを用いた複合加工機のための自動加工工程設計システム},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684102,
  author = {長瀬重信 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {分割領域毎の最適加工パスによる自由曲面加工の効率化},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684100,
  author = {酒井康徳 and 吉岡勇人 and 朱疆 and 齋藤義夫 and 田中智久},
  title = {転がり案内における非線形摩擦に起因する振動の複素ばねモデルを用いた解析},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684096,
  author = {高卉葳 and 朱疆 and 吉岡勇人 and 齋藤義夫 and 田中智久},
  title = {自律分散システムを用いた柔軟な生産スケジューリングシステムの構築},
  booktitle = {2015年度精密工学会春季大会学術講演会講演論文集},
  year = 2015,
}

@inproceedings{CTT100684081,
  author = {原田将 and 朱 疆 and 田中智久 and 吉岡勇人 and 齋藤義夫},
  title = {チタンへのレーザ照射による構造色に関する研究－色再現性の向上と広色空間の実現},
  booktitle = {日本機械学会生産システム部門研究発表講演会2015講演論文集},
  year = 2015,
}

@inproceedings{CTT100684086,
  author = {yuanrui zhang and JIANG ZHU and Hayato Yoshioka and YOSHIO SAITO and TOMOHISA TANAKA},
  title = {Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100684265,
  author = {Yasunori SAKAI and Jiang Zhu and Tomohisa Tanaka and Hayato Yoshioka and Yoshio Saito},
  title = {Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway},
  booktitle = {Proceedings of MECHATRONICS 2014},
  year = 2014,
}

@inproceedings{CTT100684089,
  author = {Yasunori Sakai and JIANG ZHU and TOMOHISA TANAKA and Hayato Yoshioka and YOSHIO SAITO},
  title = {Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction},
  booktitle = {Proceeding of the 16th International Machine Tool Engineers` Conference},
  year = 2014,
}

@inproceedings{CTT100677367,
  author = {原 幹也 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {切削条件が PTFE エンドミル加工の切削抵抗に及ぼす影響},
  booktitle = {２０１４年度砥粒加工学会学術講演会論文集},
  year = 2014,
}

@inproceedings{CTT100668347,
  author = {酒井康徳 and 花岡俊樹 and 朱疆 and 齋藤義夫 and 田中智久},
  title = {加振力振幅が直動転がり案内の動特性に及ぼす影響},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668346,
  author = {Nitin Sharma and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D Model Registration Based on Feature Extraction Using Segmentation},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668345,
  author = {小池勇樹 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化},
  booktitle = {2014年度精密工学会春季大会学術講演会講演論文集},
  year = 2014,
}

@inproceedings{CTT100668349,
  author = {前田直輝 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {レーザを用いた金属細線の積層による3次元形状の創成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100668348,
  author = {大石真也 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {ステンレス線材のレーザフォーミングメカニズムに関する研究},
  booktitle = {日本機械学会生産システム部門研究発表講演会2014講演論文集},
  year = 2014,
}

@inproceedings{CTT100664708,
  author = {Xu Zhou and Tomohisa Tanaka and Jiang Zhu and Yoshio Saito},
  title = {Titanium Coloring Mechanism through Laser Irradiation},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664710,
  author = {Tomohisa Tanaka and Shinya Oishi and Jiang Zhu and Yoshio Saito},
  title = {Study on the Laser Forming of Thin Stainless-steel Wire},
  booktitle = {Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2013,
}

@inproceedings{CTT100664706,
  author = {Jiang ZHU and Saori MUTO and Tomohisa Tanaka and Yoshio SAITO},
  title = {Development of Automatic Machining Process Deciding System Based on 3D-Model},
  booktitle = {Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2013,
}

@inproceedings{CTT100661084,
  author = {原幹也 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {切削条件がPTFEの加工面性状に与える影響に関する研究},
  booktitle = {ABTEC2013砥粒加工学会学術講演会講演論文集},
  year = 2013,
}

@inproceedings{CTT100651354,
  author = {武藤沙織 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元形状モデルからの加工工程自動決定システムの開発},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100651298,
  author = {Osama Abdelaal and Jiang Zhu and Tomohisa Tanaka and Saied Darwish and Yoshio Saito},
  title = {Additive Manufacturing of Custom-made Hip Implants},
  booktitle = {Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013},
  year = 2013,
}

@inproceedings{CTT100651290,
  author = {大石真也 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {ステンレス線材へのレーザフォーミングの適用},
  booktitle = {日本機械学会生産システム部門研究発表講演会2013講演論文集},
  year = 2013,
}

@inproceedings{CTT100651345,
  author = {穂積昭充 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {NURBS曲面の分割による高効率加工パスの生成},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100651334,
  author = {長谷川将臣 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによる多軸加工機の粗加工の効率化},
  booktitle = {Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013},
  year = 2013,
}

@inproceedings{CTT100645589,
  author = {Yuanrui Zhang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645590,
  author = {Xu Zhou and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Research on the Structural Color Appearance of Titanium by Laser Irradiation},
  booktitle = {Proceeding of the 15th International Machine Tool Engineers` Conference},
  year = 2012,
}

@inproceedings{CTT100645065,
  author = {周煦 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {レーザ照射によるチタン酸化被膜の発色メカニズムに関する研究},
  booktitle = {第9回生産加工・工作機械部門講演会論文集},
  year = 2012,
}

@inproceedings{CTT100645066,
  author = {朱疆 and 後藤純平 and 田中智久 and 齋藤義夫},
  title = {放電加工を利用した積層造型法のツールパス生成},
  booktitle = {第9回生産加工・工作機械部門講演会論文集},
  year = 2012,
}

@inproceedings{CTT100634445,
  author = {張遠瑞 and 武 建涛 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {6-DOFパラレルメカニズムのワークテーブルの誤差要因解析},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634442,
  author = {飯塚祐哉 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザフォーミングによる細線構造物の造形に関する研究},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634443,
  author = {塚崎 遥 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザを用いた金属樹脂混成積層造形に関する研究},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634444,
  author = {関口 翔太 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸冗長ロボットシステムを用いた加工システムの構築},
  booktitle = {2012年度精密工学会春季大会学術講演会講演論文集},
  year = 2012,
}

@inproceedings{CTT100634447,
  author = {長谷川将臣 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによるターニングセンタの粗加工工程の検証},
  booktitle = {日本機械学会生産システム部門研究発表講演会2012講演論文集},
  year = 2012,
}

@inproceedings{CTT100645619,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model},
  booktitle = {},
  year = 2012,
}

@inproceedings{CTT100631593,
  author = {Jiang Zhu and Yusuke Narabu and Tomohisa Tanaka and Yoshio Saito},
  title = {Manufacturing Feature Extraction System of 3D-Model for Process Planning},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100631596,
  author = {Takahiro Kubo and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region},
  booktitle = {Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2011,
}

@inproceedings{CTT100643289,
  author = {B. Leban and M. Pau and M. Ishida and T. Tanaka},
  title = {On the Reliability and Robustness of a Non-Invasive Experimental Method for the Measurements of Real Area of Contact between Rough Surfaces},
  booktitle = {},
  year = 2011,
}

@inproceedings{CTT100643284,
  author = {Tsunamitsu Nakahara and Tomohisa Tanaka},
  title = {A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear},
  booktitle = {International Tribology Conference, Hiroshima 2011},
  year = 2011,
}

@inproceedings{CTT100628705,
  author = {穂積 昭充 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {6軸制御ワイヤ放電加工機用加工支援システムの作成},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628704,
  author = {塚崎 遥 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {5軸制御によるサポートフリーRP装置の開発},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628711,
  author = {大池 瞬介 and 田中 智久 and 朱 疆 and 齋藤 義夫},
  title = {自律分散システムを応用した堅牢な生産スケジューリングシステム},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628709,
  author = {関口 翔太 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸冗長ロボットシステムによる三次元加工},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628703,
  author = {武藤沙織 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {RP装置による三次元形状の創成と評価},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628707,
  author = {木下 真也 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {チタンへのレーザ照射による構造色の発見に関する研究},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628706,
  author = {西尾 拓 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザーを用いた異種材料混成造形物創成のための基礎的研究},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100628702,
  author = {飯塚裕哉 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {レーザフォーミングによる細線構造物造形},
  booktitle = {日本機械学会2011年度年次大会 講演論文集},
  year = 2011,
}

@inproceedings{CTT100631779,
  author = {Asim Al-Sofi and Yoshio Saito and Tomohisa Tanaka and Jiang Zhu},
  title = {Generating the Measurement Points Based on Finishing NC Data},
  booktitle = {Proceeding of 2011 IEEE International Conference on Mechatronics (ICM)},
  year = 2011,
}

@inproceedings{CTT100619339,
  author = {小倉康平 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {PMMAの三次元形状加工に向けたエキシマレーザアブレーションの加工特性},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619340,
  author = {奈良部優介 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元形状モデルからの加工法自動決定システムの開発},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619341,
  author = {武隈裕一 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {三次元モデルの比較による形状評価システムの構築},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619342,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {粗さ接触面における接触部直接観察による高荷重摩耗特性評価},
  booktitle = {2011年度精密工学会春季大会学術講演会講演論文集},
  year = 2011,
}

@inproceedings{CTT100619395,
  author = {Jiang Zhu and Akira Yanagisawa and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT)},
  booktitle = {Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011},
  year = 2011,
}

@inproceedings{CTT100619713,
  author = {大池瞬介 and 田中智久 and 朱疆 and 齋藤義夫},
  title = {自律分散システムを応用した堅牢な生産スケジューリングシステム},
  booktitle = {日本機械学会生産システム部門研究発表講演会2011講演論文集},
  year = 2011,
}

@inproceedings{CTT100615871,
  author = {Jiang Zhu and Keisuke Nomura and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh},
  booktitle = {Proceeding of the 14th International Conference on Mechatronics Technology},
  year = 2010,
}

@inproceedings{CTT100614418,
  author = {Shota Sekiguchi and JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Freeform Surface Machining and Measurement by 8-axis Robot System},
  booktitle = {Proceedings of the 14th International Machine Tool Egineers' Conference},
  year = 2010,
}

@inproceedings{CTT100617994,
  author = {新宅健吾 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {既加工部の形状測定データを利用したワーク付け替え時における精度維持},
  booktitle = {日本機械学会 第八回生産加工・工作機械部門講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100612497,
  author = {西山浩司 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {2.5軸輪郭加工に適した高効率加工パスの生成},
  booktitle = {2010年度精密工学会秋季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100611645,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {高荷重域における粗さ接触表面下の塑性変形状態判別},
  booktitle = {ABTEC2010砥粒加工学会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601111,
  author = {野村佳佑 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多分解能メッシュによるターニングセンタの高効率化加工},
  booktitle = {2010年度精密工学会春季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100600908,
  author = {奈良部優介 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {加工のためのCADモデル特徴領域の自動抽出},
  booktitle = {日本機械学会北陸信越支部第47期総会・講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100601112,
  author = {小森正裕 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {6軸パラレルメカニズムを用いたワークテーブルの開発},
  booktitle = {2010年度精密工学会春季大会学術講演会講演論文集},
  year = 2010,
}

@inproceedings{CTT100593347,
  author = {Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593349,
  author = {Jiang Zhu and Ryota Tanabe and Tomohisa Tanaka and Yoshio Saito},
  title = {Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593350,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Excimer Laser 3D Machining Based on Irradiation Pulse Number Control},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100593348,
  author = {Xiaoyi Wang and Quanxian Wang and Yoshio Saito and Jiang Zhu and Tomohisa Tanaka},
  title = {Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2009,
}

@inproceedings{CTT100592662,
  author = {Yusuke Narabu and Zuanshi Haranud and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100592664,
  author = {Masahiro Komori and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools},
  booktitle = {Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology},
  year = 2009,
}

@inproceedings{CTT100592000,
  author = {Tomohisa TANAKA and Bruno LEBAN and Takahiro KUBO and Yoshio SAITO and Massimiliano PAU and Hua CHEN and Makoto ISHIDA},
  title = {Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces},
  booktitle = {Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems},
  year = 2009,
}

@inproceedings{CTT100589861,
  author = {鈴木純 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {作業区間をシェルに内包する小型工作機械},
  booktitle = {日本機械学会2009年度年次大会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589860,
  author = {武隈裕一 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {セラミックスのフルモールド成形法に関する研究},
  booktitle = {2009年度精密工学会秋季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589411,
  author = {小森正裕 and 齋藤 義夫 and 田中 智久 and 朱 疆},
  title = {工作機械に適した6軸パラレルメカニズムを用いたワークテーブルの開発},
  booktitle = {2009年度砥粒加工学会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589858,
  author = {Xiaoyi Wang and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A New Assembly Model Capable of Reorganizing Assembly Structure},
  booktitle = {Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009},
  year = 2009,
}

@inproceedings{CTT100589859,
  author = {久保喬弘 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {粗さ面の真実接触部判定の高精度化に関する研究},
  booktitle = {2009年度精密工学会秋季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100589862,
  author = {奈良部優介 and ﾊﾗﾉﾄﾞｼﾞｮﾝｼ and 朱疆 and 田中智久 and 齋藤義夫},
  title = {自由曲面ミル加工のための形状に基づくパス選択},
  booktitle = {日本機械学会2009年度年次大会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571833,
  author = {棚瀬雅貴 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる非接触三次元形状計測パスの生成方法},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571834,
  author = {田辺龍太 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールによる３次元形状の加工と計測},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100571435,
  author = {馮飛 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸加工システムによる３Dモデルの加工に適用するツールパスの生成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2009講演論文集},
  year = 2009,
}

@inproceedings{CTT100571835,
  author = {鈴木 僚 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {パルス数制御による高分子材料の自由曲面レーザアブレーション加工},
  booktitle = {２００９年度精密工学会春季大会学術講演会講演論文集},
  year = 2009,
}

@inproceedings{CTT100566328,
  author = {Ryuta Tanabe and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Measurement and machining using polar coordiante desktop machine tool},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566327,
  author = {Masataka Tanase and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Freeform surface sculpturing and measurement system based on 8-axis robot system},
  booktitle = {Proceedings of the 13th International Machine Tool Engineers' Conference},
  year = 2008,
}

@inproceedings{CTT100566627,
  author = {朱 疆 and ハラノド ジョンシ and 田中 智久 and 齋藤 義夫},
  title = {CG画像簡略化技術を利用した自由曲面特徴領域の抽出に関する研究},
  booktitle = {日本機械学会 第七回生産加工・工作機械部門講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565219,
  author = {JIANG ZHU and TOMOHISA TANAKA and YOSHIO SAITO and Lining Sun},
  title = {Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100592810,
  author = {Shunsuke Oike and TOMOHISA TANAKA and YOSHIO SAITO},
  title = {Flexible Manufacturing Scheduling},
  booktitle = {Proceeding of the 13th Internation Conference on Machine Design and Production},
  year = 2008,
}

@inproceedings{CTT100565455,
  author = {田辺龍太 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた加工},
  booktitle = {２００８年度精密工学会秋季大会学術講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565454,
  author = {棚瀬雅貴 and 朱疆 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる非接触三次元形状計測},
  booktitle = {２００８年度精密工学会秋季大会学術講演会講演論文集},
  year = 2008,
}

@inproceedings{CTT100565340,
  author = {野村佳佑 and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {8軸加工システムの高機能化に関する研究},
  booktitle = {日本機械学会2008年度年次大会講演論文集},
  year = 2008,
}

@inproceedings{CTT100562126,
  author = {朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {自由曲面加工に適した粗加工モデルの生成},
  booktitle = {日本機械学会生産システム部門研究発表講演会2008講演論文集},
  year = 2008,
}

@inproceedings{CTT100562127,
  author = {ハラノド ジョンシ and 朱 疆 and 田中 智久 and 齋藤 義夫},
  title = {自由曲面加工に適した工具パスの生成方法},
  booktitle = {日本機械学会生産システム部門研究発表講演会2008講演論文集},
  year = 2008,
}

@inproceedings{CTT100562698,
  author = {本田兼基 and 齋藤義夫 and 田中智久},
  title = {高周波誘導加熱によるCFRPの成形過程},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100556212,
  author = {Ryo Suzuki and Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis Surface Sculpturing System by Heated Cutting Tools},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562695,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {一体構造による工作機械の小型軽量化に関する研究},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562696,
  author = {波田純一 and 田中智久 and 齋藤義夫},
  title = {複合加工に適した工程設計システム},
  booktitle = {2008年度 精密工学会春季大会学術講演会 講演論文集},
  year = 2008,
}

@inproceedings{CTT100562700,
  author = {Ryo Tanabe and Yoshio Saito and Tomohisa Tanaka},
  title = {Measurement and Machining by using Polar Coordinate Desktop Machine Tool},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100562699,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Tool Path Generation Method for Freeform Surface Machining},
  booktitle = {Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science)},
  year = 2008,
}

@inproceedings{CTT100610616,
  author = {Guanglei Liu and Tomohisa Tanaka and Yoshio Saito},
  title = {A Study on Miniature Automatic Tool Changer for Desktop Machine Tool},
  booktitle = {Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)},
  year = 2007,
}

@inproceedings{CTT100556211,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System},
  booktitle = {Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21},
  year = 2007,
}

@inproceedings{CTT100544167,
  author = {田中智久 and Leban Bruno and 齋藤義夫 and 陳樺 and 石田誠},
  title = {球状凸面と平面の接触における全反射接触部観察の特性評価},
  booktitle = {トライボロジー会議予稿集 佐賀 2007-9},
  year = 2007,
}

@inproceedings{CTT100544172,
  author = {小森正裕 and 齋藤義夫 and 田中智久},
  title = {直動型パラレルメカニズムの機構特性},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544175,
  author = {波田純一 and 田中智久 and 齋藤義夫},
  title = {複合加工に適した工程設計システム},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544174,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {一体構造による工作機械の小型軽量化に関する研究},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544173,
  author = {Zuanshi Haranud and Tomohisa Tanaka and Yoshio Saito},
  title = {Study on constant scallop height tool path generation for freeform surface machining},
  booktitle = {2007年度 精密工学会秋季大会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544166,
  author = {田中智久 and 中原綱光},
  title = {粗さ接触面の接触過酷度に及ぼすなじみの影響に関する理論的検討},
  booktitle = {トライボロジー会議予稿集 佐賀 2007-9},
  year = 2007,
}

@inproceedings{CTT100544165,
  author = {田中智久 and 高下法子 and Leban Bruno and 齋藤義夫},
  title = {すべり接触する突起の真実接触部挙動観察},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100544164,
  author = {田中智久 and 木村雄一郎 and 齋藤義夫 and 汲田孝行 and 駒井保宏},
  title = {マシニングセンタ用ホーニングツールの実用化に関する研究},
  booktitle = {2007年度砥粒加工学会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100556210,
  author = {Jiang Zhu and Ryo Suzuki and Tomohisa Tanaka and Yoshio Saito},
  title = {A Surface Sculpturing System Based on 8-Axis Robot},
  booktitle = {Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007},
  year = 2007,
}

@inproceedings{CTT100544171,
  author = {川俣敦史 and 齋藤義夫 and 田中智久},
  title = {エンドミル加工におけるスピンドルスルーMQLの効果},
  booktitle = {2007年度 砥粒加工学会学術講演会 講演論文集},
  year = 2007,
}

@inproceedings{CTT100533418,
  author = {竹中正彬 and 田中智久 and 齋藤義夫},
  title = {極座標型計測・加工装置の誤差補正に関する研究},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100533417,
  author = {高下法子 and 田中智久 and 斎藤義夫},
  title = {粗面の接触特性に及ぼす接線力の影響},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100533419,
  author = {劉光磊 and 斉藤義夫 and 田中智久},
  title = {デスクトップ型工作機械に適した小型自動工具交換装置に関する研究},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2007,
}

@inproceedings{CTT100562123,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {Rough machining process and its simulation for robot integraged surface sculpturing system},
  booktitle = {Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems},
  year = 2006,
}

@inproceedings{CTT100524922,
  author = {Nafis AHMAD and Tomohisa TANAKA and Yoshio SAITO},
  title = {Optimization of End Milling Operation By Genetic Algorithm based on Self Organizing Adaptive Penalty Strategy},
  booktitle = {Proceedings of The 12th Asia Pacific Management Conference XII-2006},
  year = 2006,
}

@inproceedings{CTT100524921,
  author = {竹中正彬 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた計測},
  booktitle = {日本機械学会第6回生産加工･工作機械部門講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100571836,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {8-axis robot integrated surface sculpturing system},
  booktitle = {New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference},
  year = 2006,
}

@inproceedings{CTT100521534,
  author = {Tomohisa Tanaka and Masahiro Ashizuka and Yoshio Saito and Tsunamitsu Nakahara},
  title = {Study on The Contact Characteristics of Truncated Surfaces},
  booktitle = {Proceedings of The 3rd Asia International Conference on Tribology},
  year = 2006,
}

@inproceedings{CTT100556205,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-axis robot based rough cutting system for surface sculpturing},
  booktitle = {Towards Synthesis of Micro-/Nano-systems},
  year = 2006,
}

@inproceedings{CTT100408598,
  author = {本田兼基 and 田中智久 and 齋藤義夫},
  title = {MQL加工用ミストセンサの開発},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408594,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {多軸ロボットシステムによる形状計測と精度評価},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100542201,
  author = {芦塚正博 and 田中智久 and 齋藤義夫},
  title = {トランケーションが及ぼす接触特性への影響(第2報) ―全反射光を利用した真実接触面積測定実験による検討―},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408595,
  author = {下河辺学 and 田中智久 and 齋藤義夫},
  title = {CAMシステムを利用したポケット形状加工の体系化},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100408597,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {エキシマレーザ加工による高分子材料の3次元形状創成},
  booktitle = {2006年度精密工学会春季大会学術講演会講演論文集},
  year = 2006,
}

@inproceedings{CTT100521259,
  author = {Jiang Zhu and Ryoko Tanaka and Tomohisa Tanaka and Yoshio Saito},
  title = {An 8-Axis Robot Based Rough Cutting System for Surface Sculpturing},
  booktitle = {Proc The 11th International Conference on Precision Engineering (ICPE)},
  year = 2006,
}

@inproceedings{CTT100556203,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {3D mesh simplification for freeform surfacing},
  booktitle = {},
  year = 2005,
}

@inproceedings{CTT100408695,
  author = {N.Ahmad and T.Tanaka and Y.Saito},
  title = {Optimization of Cutting Parameters for End Milling Operation by SOAP Based Genetic Algorithm},
  booktitle = {Proc. 6th Int. Conf. on Mech. Engr.},
  year = 2005,
}

@inproceedings{CTT100408318,
  author = {J.Zhu and T.Tanaka and Y.Saito},
  title = {3D Mesh Simplification for FreeForm Surfacing},
  booktitle = {Proc. Teheran International Congress on Manufacturing Engineering},
  year = 2005,
}

@inproceedings{CTT100392874,
  author = {田中智久 and 京極啓史 and 中原綱光},
  title = {真実接触面積に及ぼす接線力の影響},
  booktitle = {トライボロジー会議 2005秋 東京},
  year = 2005,
}

@inproceedings{CTT100398650,
  author = {Nafis AHMAD and Tomohisa TANAKA and Yoshio SAITO},
  title = {Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy},
  booktitle = {Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya},
  year = 2005,
}

@inproceedings{CTT100392879,
  author = {菅谷健二郎 and 田中智久 and 齋藤義夫},
  title = {高分子材料へのエキシマレーザアブレーション加工に関する研究},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100408696,
  author = {Tomohisa TANAKA and Chikara YAMANAKA and Keiji KYOGOKU and Tsunamitsu NAKAHARA},
  title = {The Effect of Interaction between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces},
  booktitle = {Proceedings of the 3rd World Tribology Congress},
  year = 2005,
}

@inproceedings{CTT100392878,
  author = {高下法子 and 田中智久 and 齋藤義夫},
  title = {弾性変形拡張方式によるホーニングツールの開発},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392875,
  author = {芦塚正博 and 田中智久 and 齋藤義夫},
  title = {トランケーションが及ぼす接触特性への影響},
  booktitle = {2005年度精密工学会秋季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100562128,
  author = {Jiang Zhu and Tomohisa Tanaka and Yoshio Saito},
  title = {A new mesh simplification algorithm for the application of surface sculpturing},
  booktitle = {Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics},
  year = 2005,
}

@inproceedings{CTT100627965,
  author = {T.Tanaka and S.Sugiyama and C.Yamanaka and S.Momozono and K.Kyogoku and T.Nakahara},
  title = {Measurement of true contact area by means of elliptical polarized light reflection under slip condition},
  booktitle = {Synopses of the International Tribology Conference Kobe},
  year = 2005,
}

@inproceedings{CTT100392888,
  author = {原雄太 and 田中智久 and 齋藤義夫},
  title = {工作機械の消費電力評価方法の構築},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392886,
  author = {深見徹 and 田中智久 and 齋藤義夫},
  title = {極座標型デスクトップマシンツールを用いた加工と計測},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100392890,
  author = {杉恵貴史 and 田中智久 and 齋藤義夫},
  title = {8軸制御曲面加工システムの構築とそのプログラミング},
  booktitle = {2005年度精密工学会春季大会学術講演会講演論文集},
  year = 2005,
}

@inproceedings{CTT100628800,
  author = {田中智久 and 杉山 聡 and 山中力 and 桃園聡 and 京極 啓史 and 中原 綱光},
  title = {全反射光を利用した粗さ面すべり接触部の真実接触面積測定},
  booktitle = {トライボロジー会議予稿集 鳥取 2004-11},
  year = 2004,
}

@inproceedings{CTT100389097,
  author = {下河辺 and 原雄太 and 田中智久 and 齋藤義夫},
  title = {工作機械の消費電力に関する測定と評価},
  booktitle = {2004年度精密工学会秋季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389096,
  author = {飯田喜洋 and 田中智久 and 齋藤義夫},
  title = {ＭＱＬ加工用ミストセンサの開発},
  booktitle = {2004年度精密工学会秋季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389099,
  author = {歌田英司 and 菅谷健二郎 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {発泡スチロールのエキシマレーザ加工に関する研究},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389100,
  author = {福永悦史 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {超小型工作機械用高速主軸の開発とMQL加工への適用},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389101,
  author = {山田維祐 and 大野竜太 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {デスクトップ型工作機械用オートアライメント機構の開発},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100389098,
  author = {高本尚志 and 田中智久 and Akbari Javad and 齋藤義夫},
  title = {コンポジットめっきの超精密切削に関する研究},
  booktitle = {2004年度精密工学会春季大会学術講演会講演論文集},
  year = 2004,
}

@inproceedings{CTT100491008,
  author = {T.SUGIE and T.TANAKA and J.AKBARI and Y.SAITO},
  title = {An Approximation of Free-Formed Surface for NC Machining},
  booktitle = {Proceedings of the International Conference  on Leading Edge Manufacturing in 21st Century, Niigata},
  year = 2003,
}

@inproceedings{CTT100537923,
  author = {Tomohisa TANAKA and Keiji KYOGOKU and Tsunamitsu NAKAHARA},
  title = {The Effect of Shear on Transition of Load Condition in 2D Contact of Rough Surfaces},
  booktitle = {Proceedings of The 2nd World Tribology Congress},
  year = 2001,
}

@misc{CTT100879957,
  author = {酒井 康徳 and 青木 繁 and 田中 智久},
  title = {機械加工における超音波振動の応用例と今後の展望},
  year = 2019,
}

@misc{CTT100594103,
  author = {TOMOHISA TANAKA},
  title = {粗さを有する接触面の摩耗形態遷移臨界圧力に関する研究},
  year = 2001,
}

@misc{CTT100885387,
  author = {田中智久 and 大野　栄三郎 and 栗田　恒雄 and 小倉　一朗 and 徳永　仁史 and 芦田　極 and 宮原　良二 and 田中　浩敬 and 金子　新 and 土屋　健介 and 成田　浩久},
  title = {医療用挿入具},
  howpublished = {公開特許},
  year = 2022,
  month  = {},
  note   = {特願2021-055618(2021/03/29), 特開2022-152741(2022/10/12)}
}


@misc{CTT100820757,
  author = {田中智久 and 酒井康徳},
  title = {加工ツールを用いた穴加工機},
  howpublished = {登録特許},
  year = 2022,
  month  = {},
  note   = {特願2018-110851(2018/06/11), 特開2019-214079(2019/12/19), 特許第7127810号(2022/08/22)}
}


@misc{CTT100794700,
  author = {田中智久 and 酒井康徳},
  title = {制振ダンパ},
  howpublished = {登録特許},
  year = 2021,
  month  = {},
  note   = {特願2017-115916(2017/06/13), 特開2019-002441(2019/01/10), 特許第6908921号(2021/07/06)}
}




@phdthesis{CTT100594103,
  author = {TOMOHISA TANAKA},
  title = {粗さを有する接触面の摩耗形態遷移臨界圧力に関する研究},
  school = {東京工業大学},
  year = 2001,
}