論文

• Shingo Tajima, Burak Sencer. Real-time trajectory generation for dual-stage feed drive systems, CIRP Annals - Manufacturing Technology, Vol. 72, pp. 317-320, Apr. 2023.
• Shingo Tajima, Burak Sencer. Online interpolation of 5-axis machining toolpaths with global blending, International Journal of Machine Tools and Manufacture, Elsevier, Volume 175, Feb. 2022.
• Tajima, S., Iwamoto, S., Yoshioka, H. Kinematic tool-path smoothing for 6-axis industrial machining robots, International Journal of Automation Technology, Vol. 15, No. 5, pp. 621-630, May 2021.
• 鳥居有沙, 吉岡勇人, 田島真吾, 新野秀憲. ハイパースペクトルデータを用いためっき加工状態の認識および加工面の定量的評価, 日本機械学会論文集, Vol. 86, No. 892, pp. 1-18, Dec. 2020.
• 酒田屋翔, 吉岡勇人, 田島真吾, 新野秀憲. ファイバレーザを用いた鉄系材料に対する面取り, 日本機械学会論文集, Vol. 86, No. 892, pp. 1-13, Dec. 2020.
• Shingo Tajima, Burak Sencer. Real-time trajectory generation for 5-axis machine tools with singularity avoidance, CIRP Annals, vol. 69, pp. 349-352, May 2020.
• Shingo Tajima, Burak Sencer. Accurate real-time interpolation of 5-axis tool-paths with local corner smoothing, International Journal of Machine Tools and Manufacture, Volume 142, Page 1-15, July 2019.
• Shingo Tajima, Burak Sencer, Eiji Shamoto. Accurate interpolation of machining tool-paths based on FIR filtering, Precision Engineering, Volume 52, Page 332-344, Apr. 2018.
• Shingo Tajima, Burak Sencer. Global tool-path smoothing for CNC machine tools with uninterrupted acceleration, International Journal of Machine Tools and Manufacture, Volume 121, Page 81-95, Oct. 2017.
• Burak Sencer, Shingo Tajima. Frequency Optimal Feed Motion Planning in Computer Numerical Controlled Machine Tools for Vibration Avoidance, Journal of Manufacturing Science and Engineering, Volume 139, 1, Jan. 2017.
• Tajima, S., Sencer, B.. Kinematic corner smoothing for high speed machine tools, International Journal of Machine Tools and Manufacture, Volume 108, Page 27-43, Sept. 2016.
• Shingo Tajima, Peng Wu, Yukihiro Okuda, Takatomo Watanabe, Tsuyoshi Uchiyama. Magneto-impedance sensor based on time analog to digital converter (TAD) for circuit integration, IEEE Transactions on Magnetics, IEEE, Vol. 51, No. 11, Nov. 2015.
• K. Wang, S. Tajima, D. Song, N. Hamada, C. Cai, T. Uchiyama. Auditory evoked field measurement using magneto-impedance sensors, Journal of Applied Physics, AIP Publishing, Vol. 117, Issue 17, Mar. 2015.
• Shingo Tajima, Yukihiro Okuda, Takamoto Watanabe, Hitoshi Aoyama, Michiharu Yamamoto, Tsuyoshi Uchiyama. High-Resolution Magneto-Impedance Sensor With TAD for Low Noise Signal Processing, IEEE TRANSACTIONS ON MAGNETICS, IEEE, Vol. 50, Issue 11, Nov. 2014.

国際会議発表 (査読有り)

• Hayato YOSHIOKA, Teruto HIFUMI, Shingo TAJIMA. Identification and grouping defects for complement in measuring of workpiece with 3D scanner, Leading Edge Manufacturing/Material and Processing (LEM&P2023), June 2023.
• Shingo TAJIMA, Yuta KOJIMA, Hayato YOSHIOKA. Displacement Compensation of Machining Robot based on Trajectory Control for High Accuracy, Leading Edge Manufacturing/Material and Processing (LEM&P2023), June 2023.
• Tajima, S., Sencer, B., Yoshioka, H.. Real-time interpolation of complex machining toolpaths with drive limits and vibration avoidance, The 19th International Conference on Precision Engineering, Proceedings of the 19th International Conference on Precision Engineering, Nov. 2022.
• Shingo Tajima, Burak Sencer. Real-Time Command Generator for Dual-Stage Processing Machine, The 37th Annual Meeting of the American Society for Precision Engineering, Oct. 2022.
• Yang Li, Hayato Kojima, Shingo Tajima, Hayato Yoshioka. Study on The Vertical Vibration Behavior of Beam Caused by Driving Force, 2022 International Symposium on Flexible Automation (ISFA2022), July 2022.
• Shingo Tajima, Burak Sencer, Hayato Yoshioka. Trajectory Generation for Dual-Drive Servo Systems for Laser Processing with Local Corner Smoothing, 2022 International Symposium on Flexible Automation (ISFA2022), July 2022.
• Kojima, Y., Yoshioka, H., Tajima, S.. Fine pattern fabrication on a 3D surface using fast tool servo for milling process, The 10th International Conference on Leading Edge Manufacturing in 21st Century, Nov. 2021.
• Fuga Yamamoto, Hayato Yoshioka, Shingo Tajima. Non-contact observation of tooth profile error of involute spur gears by using autocollimator, The 23rd International Symposium on Advanced Abrasive Technology, Nov. 2021.
• Hifumi, T., Tajima, S., Yoshioka, H.. Tool path control for singularity avoidance of 5-axis machine tool by combining circular arc and cubit spline, The 10th International Conference on Leading Edge Manufacturing in 21st Century, Nov. 2021.
• Tajima, S., Sencer, B., Yoshioka, H.. Kinematic smoothing for singularity avoidance in 5-axis machining, 18th International Conference on Precision Engineering (ICPE2020), Proceedings of ICPE2020, pp. C-1-9, Nov. 2020.
• Tajima, S., Sencer, B., Yoshioka, H., Shinno, H.. Smooth path blending for 5-axis machining, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), June 2020.
• Shingo Tajima, Burak Sencer. Real‐time Interpolation of 5‐axis Tool‐paths with Accurate Local Corner Smoothing, 8th International Conference on Virtual Machining, Apr. 2019.
• Shingo Tajima, Burak Sencer. KINEMATIC LOCAL CORNER SMOOTHING OF 5-AXIS LINEAR TOOL-PATHS, 2018 International Symposium on Flexible Automation, Proceedings of the International Symposium on Flexible Automation, The Institute of Systems, Control and Information Engineers, Vol. 2018, pp. 217-224, July 2018.
• Shingo Tajima, Burak Sencer. Jerk Limited High Speed Cornering for CNC Machines with Controlled Contour Error, The 16th International Conference on Precision Engineering, Proceedings of the ICPE, 2016, Nov. 2016.
• Shingo Tajima, Burak Sencer. Uninterrupted Interpolation Of Short-Segmented Linear Tool-Paths Based On Jerk Limited Kinematic Corner Smoothing, 31st ASPE Annual Meetings, Proceedings of the ASPE Annual Meetings, Oct. 2016.
• Shingo Tajima, Burak Sencer. SMOOTH CORNERING STRATEGY FOR HIGH SPEED CNC MACHINE TOOLS WITH CONFINED CONTOUR ERROR, ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016), Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference MSEC2016, American Society of Mechanical Engineers, June 2016.  公式リンク  
  
• S . TAJIMA, P.WU, Y . OKUDA, T . WATANABE, T . UCHIYAMA. Magneto-Impedance Sensor Based on TAD for Integration, INTERMAG 2015, May 2015.
• K. Wang, S. Tajima, Y. Asano, Y.Okuda, N. Hamada, C. Cai, T. Uchiyama. Detection of P300 brain waves using a Magneto-Impedance sensor, The 8th International Conference on Sensing Technology, Proceedings of the 8th International Conference on Sensing Technology, pp. 547-550, Sept. 2014.
• S. Tajima, T. Uchiyama, Y. Okuda, K. Wang. Brain activity measurement in the occipital region of the head using a magneto-impedance sensor, 2013 Seventh International Conference on Sensing Technology, 2013 Seventh International Conference on Sensing Technology, IEEE, Dec. 2013.
• T. Uchiyama, S. Tajima, S. Shibata, L. Ji, K. Bushida. Biomagnetic Signal Detection Using Very High Sensitive MI Sensor for Medical Applications, IEEE International Magnetics Conference, May 2008.
• Daniela Vassileva, Shingo Tajima, George Boiadjiev, Haruhisa Kawasaki, Tetsuya Mouri. Sensibility Control of Redundant Robots: Numerical Analysis and Experimental Results, SICE Annual Conference 2007, SICE Annual Conference, IEEE, Sept. 2007.

国内会議発表 (査読なし・不明)

• 吉岡 勇人, 遠藤 将貴, 田島 真吾. 工作機械ボルト結合部の伝熱特性に及ぼす接触面圧の影響, 第14回 生産加工・工作機械部門講演会（生産加工・工作機械部門 企画）, Oct. 2022.
• 宮下和也, 吉岡勇人, 田島真吾. 産業用ロボットの固有振動数変化を考慮した速度プロファイル生成法, 2022年度精密工学会春季大会, 2022年度精密工学会春季大会学術講演会講演論文集, pp. 737-738, Mar. 2022.
• 岩本啓志, 田島真吾, 吉岡勇人. 冗長性を持つ産業用ロボットの機械加工における位置決めの高精度化, 2022年度精密工学会春季大会, 2022年度精密工学会春季大会学術講演会講演論文集, pp. 741-742, Mar. 2022.
• 山本健彰, 田島真吾, 吉岡勇人, 奥山弥生, 勝田悠介, 江草宏. 人工支台歯形状の特徴抽出に基づく自動評価システムの開発, 2022年度精密工学会春季大会, 2022年度精密工学会春季大会学術講演会講演論文集, pp. 580-581, Mar. 2022.
• 原佳之, 吉岡勇人, 田島真吾. 研削力の時間領域および周波数領域における特徴量推移に基づく砥石表面状態変化の推定, 2022年度精密工学会春季大会, 2022年度精密工学会春季大会学術講演会講演論文集, pp. 393-394, Mar. 2022.
• 尾山直駿, 吉岡勇人, 奥山弥生, 田島真吾, 江草 宏, 新野秀憲. 光切断法を用いた人工歯形状評価法, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, E0102, Sept. 2020.
• 吉岡勇人, 橋本淳哉, 田島真吾, 新野秀憲. CFRPの繊維配向を考慮した工作機械テーブルの検討, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, B0101, Sept. 2020.
• 岩本啓志, 吉岡勇人, 田島真吾, 新野秀憲. 反力利用形カウンタウェイト機構における外乱応答特性, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, B0107, Sept. 2020.
• 田島 真吾, 柴田進司, 内山 剛. ドライバーの覚醒度検知を目的とした磁気インピーダンスセンサによる非接触生体信号検出法, マグネティックス研究会, Oct. 2008.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]