論文

• Seweon Choi, Hoonsung Cho, SHINJI KUMAI. Effect of the preipitation of secondary phases on the thermal diffusivity and thermal conductivity of Al-4.5Cu alloy, Journal of Alloys and Compounds, Vol. 688, pp. 897-902, Dec. 2016.
• Seweon Choi, Hoonsung Cho, SHINJI KUMAI. Influence of precipitation on the coefficient of thermal expansion of l-Si-Mg-Cu-(Ti) alloys, Journal of Alloys and Compounds, Vol. 655, pp. 6-10, Dec. 2016.
• 吉野路英, 岩尾 祥平, 江戸 正和, 村石信二, 熊井真次. ろう付処理したAl-Mn系合金の材料特性に及ぼす均質化処理およびろう付条件の影響, 軽金属, Vol. 66, No. 12, pp. 652-659, Dec. 2016.
• Seweon Choi, Hoonsung Cho, SHINJI KUMAI. Titanium as an intermetallic phase stabilizer and its effect on the mechanical and thermal properties of Al-Si-Mg-Cu-Ti alloy, Materials Science and Engineering: A, Vol. 678, pp. 267-272, Dec. 2016.
• Y. Aizawa, J. Nishiwaki, Y. Harada, S. Muraishi, S. Kumai. Experimental and Numerical Analysis of the Formation Behavior of Intermediate Layers at Explosive Welded Al/Fe Joint Interfaces, Journal of Manufacturing Processes, Vol. 24, pp. 100-106, Oct. 2016.
• 高山雄介, 山野花穂, 成田渉, 中村亮司, 筒井あかり, 原田陽平, 村石信二, 熊井真次. タンデム式縦型高速双ロールキャスト法により作製した熱交換器材料の組織とろう付特性, 鋳造工学, Vol. 88, No. 10, pp. 615-623, Oct. 2016.
• 原田陽平, 山田洋希, 熊井真次. 固相スタッド接合したSS400鋼スタッドと5052アルミニウム合金板の接合界面組織と温度履歴, 軽金属, Vol. 66, No. 9, pp. 489-496, Sept. 2016.
• Y. Harada, Y. Sada, S. Kumai. Joining Steel Studs and Steel Plates by Solid-State Stud Welding and Estimation of Temperature near the Joint Interface, Journal of Manufacturing Processes, Vol. 23, pp. 75-82, June 2016.
• 西脇淳人, 熊井真次. Cu/Al爆発圧接界面における局所融解領域形成に関するシミュレーション, 溶接学会論文集, Vol. 34, No. 4, pp. 274-284, Apr. 2016.
• 熊井真次. 銅及び銅合金の色とテクスチャ評価, 銅と銅合金, Vol. 55, No. 1, p. 1-5, Jan. 2016.
• 米原 牧子, 熊井真次, 磯野 宏秋, 木原 幸一郎, 杉林 俊雄. 銅及び銅合金の色とテクスチャ評価, 銅と銅合金, Vol. 55, No. 1, pp. 1-5, Jan. 2016.

国際会議発表 (査読有り)

• SHINJI KUMAI, Yohei Harada, Li Gao. Color metallography of A356 aluminum alloy castings using Weck's reagent, YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), pp. 85-86, Aug. 2016.
• Y. Takayama, Y. Harada, S. Muraishi, S. Kumai. Relationship between solidification microstructure and temperature change during clad strip fabrication by using vertical-type tandem twin-roll caster, YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), pp. 90-93, Aug. 2016.
• R. Song, K. Otsuka, Y. Harada, S. Muraishi, S. Kumai. Microstructural characterization in high-speed twin roll cast Al-Mn based alloys strip, YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), Proceedings of YFE6 (The 6th Korea-Japan Conference for Young Foundry Engineers), pp. 112-115, Aug. 2016.
• Michihide Yoshino, SHOHEI IWAO, Shinji Muraishi, SHINJI KUMAI. Effect of Brazing Condition on Mechanical Property for Brazed Al-Mn Alloy, PRICM9, Aug. 2016.
• SHINJI KUMAI. Experimental and Numerical Analyses on Dissimilar-Metal Joining Using Impact Welding, The 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), Final program of the 9th Pacific Rim International Conference on Advanced Materials and Processing (PRICM9), pp. 33, Aug. 2016.
• S. Kumai, Y. Takayama, R. Nakamura, D. Shimosaka, Y. Harada, M-S. Kim. Application of vertical-type high-speed twin-roll casting for up-grade recycling and clad sheets fabrication of aluminum alloys, ICAA15 (The 15th International Conference on Aluminum Alloys), Materials Science Forum, Vol. 877, pp. 56-61, June 2016.
• J. Nishiwaki, T. Kambe, Y. Kedo, Y. Harada, S. Muraishi, S. Kumai. Numerical analysis of wavy interface formation and successive temperature change in magnetic pulse welded Al/Cu joint, ICAA15 (The 15th International Conference on Aluminum Alloys), Materials Science Forum, Vol. 877, pp. 655-661, June 2016.
• R. Song, Y. Harada, S. Muraishi, S. Kumai. Microstructural evolution of Al-Mn based alloy fabricated by vertical-type high-speed twin-roll casting, ICAA15 (The 15th International Conference on Aluminum Alloys), Materials Science Forum, Vol. 877, pp. 51-55, June 2016.
• S. Lei, L. Gao, Y. Harada, S. Kumai. Microstructure and mechanical properties of semi-solid die-cast A356 aluminum alloy, ICAA15 (The 15th International Conference on Aluminum Alloys), Materials Science Forum, Vol. 877, pp. 39-44, June 2016.
• K. Prapasajchavet, Y. Harada, S. Kumai. Microstructure analysis of Al-5%Mg alloy semi-solid slurry by Weck’s reagent, WFC72 (The 72nd World Foundry Congress), Program & Proceedings USB, O-37, May 2016.
• Y. Takayama, Y. Harada, S. Kumai. Solidification Manner of Overlay Alloy in Al-Mn/Al-Si Alloy Clad Strips Produced by Vertical-Type Tandem Twin-Roll Casting, WFC72 (The 72nd World Foundry Congress), Program & Proceedings USB, O-85, May 2016.
• S. Kumai, Y. Harada, L. Gao. Color metallography of A356 aluminum alloy castings using Weck’s reagent, WFC72 (The 72nd World Foundry Congress), Program & Proceedings USB, O-36, May 2016.

国際会議発表 (査読なし・不明)

• D. Yamagishi, Y. Aizawa, J. Nishiwaki, Y. Harada, S. Muraishi, S. Kumai. Microstructure and thermal history of explosive welded pure aluminum / SS400 steel joint, PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing), Technical Program, p. 6, Aug. 2016.
• T. Sugiyama, Y. Takayama, Y. Harada, S. Kumai. Thermal history of Al-Cu alloy / pure Al clad strips fabricated by vertical-type tandem twin-roll casting, PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing), Technical Program, p. 29, Aug. 2016.
• D. Kikuchi, Y. Harada, S. Muraishi, S. Kumai. Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin roll casting, PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing), Technical Program, p. 29, Aug. 2016.
• T. Asakura, Y. Harada, S. Muraishi, S. Kumai. High-speed solid-state joining of aluminum alloy stud on aluminum-resin composite panel, PRICM9 (The 9th Pacific Rim International Congress on Advanced Materials and Processing), Technical Program, p. 6, Aug. 2016.

国内会議発表 (査読なし・不明)

• 大塚一帆, 原田陽平, 村石信二, 熊井真次. 縦型高速双ロールキャスト法により急冷凝固したAl-1～4wt%Mn合金板のミクロ組織とMn固溶度, （一社）軽金属学会 第131回秋期大会, 講演概要集, pp. 51-52, Nov. 2016.
• 菊地大輔, 原田陽平, 村石信二, 熊井真次. 縦型高速双ロールキャスト中の溶湯温度測定によるAC7A合金板表面の周期的帯状模様の形成要因の検討, （公社）日本鋳造工学会 第168回全国講演大会, 講演概要集, p. 20, Sept. 2016.
• 大塚一帆, 原田陽平, 村石信二, 熊井真次. 縦型高速双ロールキャスト法により急冷凝固したAl-Mn合金板の凝固過程, （公社）日本鋳造工学会 第168回全国講演大会, 講演概要集, p. 21, Sept. 2016.
• 杉山智美, 原田陽平, 村石信二, 熊井真次. タンデム式縦型高速双ロールキャスト法により作製したAl-Cu合金/純Alクラッド材の凝固挙動, （公社）日本鋳造工学会 第168回全国講演大会, 講演概要集, p. 19, Sept. 2016.
• 西脇淳人, 原田陽平, 村石信二, 熊井真次. 電磁圧接したAl/Cu接合材の波状界面の形成過程と接合界面の温度変化の数値解析, （一社）軽金属学会 第130回春期大会, 講演概要集, pp. 35-36, May 2016.
• 田中裕太郎, 原田陽平, 熊井真次. 縦型高速双ロールキャスト法によるAl-Mn合金の力学的特性の向上, （公社）日本金属学会2016年春期講演大会（第158回）, 講演概要CD, p. 198, Mar. 2016.
• 李 睿, 原田陽平, 熊井真次. A356合金縦型高速双ロールキャスト材の表面周期模様に及ぼす合金成分の影響, （公社）日本金属学会2016年春期講演大会（第158回）, 講演概要CD, p. 199, Mar. 2016.

特許など

• 原田陽平, 熊井真次, 竹永　健二　, 斉藤　恒成　, 久保寺　美憲　. 積層複合板への接合に用いるスタッドピン接合装置、及びスタッドピン接合方法. 特許. 登録. 国立大学法人東京工業大学, 曙機械株式会社. 2015/02/27. 特願2015-038064. 2016/09/05. 特開2016-159308. 特許第6639790号. 2020/01/07 2020.
• 熊井真次, 原田陽平, 井上　馨亮　, 桜井　寛　, 源島　文彦　, 惣田　裕司, 神戸　洋史　, 林　憲司, 大塚　真司. 成形性に優れたアルミニウム合金板. 特許. 登録. 国立大学法人東京工業大学, 日産自動車株式会社. 2014/10/24. 特願2014-217433. 2016/05/19. 特開2016-084501. 特許第6474582号. 2019/02/08 2019.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]