|
佐藤千明 2019年 研究業績一覧 (13件 / 297件)
論文
-
J.J.M.Machado,
A.Hayashi,
Y.Sekigushi,
R.D.S.G.Campilho,
E.A.S.Marques,
C.Sato,
Lucas F.M.da Silva.
Dynamic behaviour in mode I fracture toughness of CFRP as a function of temperature,
Theoretical and Applied Fracture Mechanics,
Vol. 103,
Oct. 2019.
-
Kazuhiro Sensui,
Taishi Tarui,
Takayuki Miyamae,
Chiaki Sato.
Evidence of chemical-bond formation at the interface between an epoxy polymer and an isocyanate primer,
Chemical Communications,
Vol. 55,
p. 14833,
Oct. 2019.
-
Yu Sekiguchi,
Minori Nakanouchi,
Kosuke Haraga,
Ippei Takasaki,
Chiaki Sato.
Experimental investigation on strength of stepwise tailored single lap adhesive joint using second-generation acrylic adhesive via shear and low-cycle shear tests,
International Journal of Adhesion and Adhesives,
Elsevier,
Vol. 95,
102438,
Sept. 2019.
公式リンク
-
関口悠,
榊原稜,
佐藤 千明.
弾性基礎上に接合されたはりの座屈解析における初期不整の影響,
日本接着学会誌,
一般社団法人 日本接着学会,
Vol. 55,
No. 7,
pp. 254-265,
July 2019.
公式リンク
-
Katsuo Komatsu,
Yu Sekiguchi,
Ryohei Ihara,
Akihiko Tatsumi,
Chiaki Sato.
Experimental investigation of an adhesive fracture energy measurement by preventing plastic deformation of substrates in a double cantilever beam test,
The Journal of Adhesion,
Talor & Francis,
Vol. 95,
No. 10,
pp. 911-928,
July 2019.
-
JJM Machado,
A Hayashi,
PDP Nunes,
EAS Marques,
RJC Carbas,
C Sato,
LFM da Silva.
Strain rate dependence of a crash resistant adhesive as a function of temperature for the automotive industry,
Proc IMechE Part L: J Materials: Design and Applications,
Vol. 233,
No. 11,
Mar. 2019.
-
Minori Nakanouchi,
Chiaki Sato,
Yu Sekiguchi,
Kosuke HARAGA,
Hiroki Uno.
Development of application method for fabricating functionally graded adhesive joints by two-component acrylic adhesives with different elastic moduli,
The Journal of Adhesion,
Talor & Francis,
Vol. 95,
pp. 529-542,
Feb. 2019.
公式リンク
国際会議発表 (査読なし・不明)
-
Asuka Hayashi,
Yu Sekiguchi,
Chiaki Sato.
Experimental investigation of curing condition effect on adhesive joints bonded with second generation acrylic adhesives,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Minori Nakanouchi,
T Yajima,
K Haraga,
H Uno,
Yu Sekiguchi,
Chiaki Sato.
Residual stress determination in SGA layer caused in curing process,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Noriaki Okada,
Yu Sekiguchi,
Chiaki Sato.
Thermal buckling of hybrid joints with adhesive and mechanical fasteners,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
-
Yu Sekiguchi,
Chiaki Sato.
Surface treatment ofhigh tensile strength steel with gas-free atmospheric-pressure plasma for welding of thermoplastics,
14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives,
Sept. 2019.
国内会議発表 (査読なし・不明)
-
関口悠,
佐藤 千明.
アクリル系構造用接着剤の接着厚さがエネルギー解放率へ及ぼす影響の実験的検討,
日本機械学会 材料力学部門 若手シンポジウム2019,
日本機械学会材料力学部門M&M若手シンポジウム2019講演論文集,
一般社団法人 日本機械学会 材料力学部門,
Aug. 2019.
公式リンク
-
関口悠,
佐藤 千明.
DCB試験における接着層の弾塑性変形の影響,
日本接着学会第57回年次大会,
日本接着学会第57回年次大会講演要旨集,
一般社団法人 日本接着学会,
103-104,
June 2019.
[ BibTeX 形式で保存 ]
[ 論文・著書をCSV形式で保存
]
[ 特許をCSV形式で保存
]
|