論文

• 里 達雄, Than Trong Long, 手塚裕康, 神尾彰彦, 高橋恒夫. Al-Cu合金強制固溶体における周期構造の形成, 日本金属学会誌, Vol. 49, No. 8, pp. 591-597, 2014.
• Jung-Moo Lee, Suk-Bong Kang, Tatsuo Sato, Hiroyasu Tezuka, Akihiko Kamio. Dry Sliding Wear Behavior of A2218/Al3Fe Composites Fabricated by Plasma Synthesis Method, Materials Transacions, Vol. 43, No. 7, pp. 1638-1646, July 2002.
• Kenichi Yaguchi, Hiroyasu Tezuka, Tatsuo Sato, Akihiko Kamio. Grain Refinement of Cast Al Alloys by Al-B Master Alloy, Materials Science Forum, Vol. 331-337, pp. 391-396, 2000.
• Kenji Matsuda, Tokimasa Kawabata, Yasuhiro Uetani, Tatsuo Sato, Akihiko Kamio, Susumu Ikeno. HRTEM Observation of G.P. Zones and Metastable Phase in Al-Mg-Si Alloys, Materials Science Forum, Vol. 331-337, pp. 989-994, 2000.
• 黒木康徳, 田中 徹, 里 達雄, 神尾彰彦. Al-Cu系合金鋳物の疲労特性に及ぼす溶湯清浄度の影響, 鋳造工学, Vol. 71, No. 6, pp. 379-384, June 1999.
• 横田純一, 廣澤渉一, 里 達雄, 神尾彰彦. Al-Li合金のδ'相析出に及ぼすCuおよびMg微量添加の影響の計算機シミュレーション, 軽金属, Vol. 49, No. 2, pp. 51-56, Feb. 1999.
• Mingyi Zheng, Kun Wu, Congkai Yao, Tatsuo Sato, Hiroyasu Tezuka, Akihiko Kamio, D.X.Li. Interfacial bond between SiCw and Mg in squeeze cast SiCw/Mg composites, Materials Letters, Vol. 41, pp. 57-62, 1999.
• Kenji Matsuda, Tsutomu Naoi, Kaname Fujii, Yasuhiro Uetani, Tatsuo Sato, Akihiko Kamio, Susumu Ikeno. Crystal Structure of the β" Phase in an Al-1.0mass%Mg2Si-0.4mass%Si Alloy, Materials science and engineering A, Vol. 262, pp. 232-237, 1999.
• 松田健二, 川畑常眞, 直井 勉, 上谷保裕, 蓮覚寺聖一, 里 達雄, 神尾彰彦, 池野 進. シリコンを過剰に含むAl-Mg-Si合金の二段時効における析出挙動, 日本金属学会誌, Vol. 62, No. 9, pp. 827-833, Sept. 1998.
• 松田健二, 吉田朋夫, 和田智美, 吉田 愛, 上谷保裕, 里 達雄, 神尾彰彦, 池野 進. 過剰にマグネシウムを含むAl-Mg-Si合金の析出過程, 日本金属学会誌, Vol. 62, No. 8, pp. 718-726, Aug. 1998.
• 藤原英道, 里 達雄, 神尾彰彦, 大瀧光弘. 析出相結晶構造に基づく銅合金設計, 伸銅技術研究会誌, Vol. 37, pp. 106-115, Aug. 1998.
• 鄭 秉準, 里 達雄, 手塚裕康, 神尾彰彦, 才川清二, 中井清之. 半溶融凝固法により製造したAl-7%Si-0.5%Mg合金の微細組織と機械的性質, 軽金属, Vol. 48, No. 7, pp. 329-334, July 1998.
• 藤原英道, 里 達雄, 神尾彰彦. Cu-Ni-Si系合金中の析出挙動に及ぼす合金組成の影響, 日本金属学会誌, Vol. 62, No. 4, pp. 301-309, Apr. 1998.
• 松田健二, 吉田朋夫, 蒲田裕志, 藤井 要, 上谷保裕, 里 達雄, 神尾彰彦, 池野 進. 二段時効したAl-1.6%Mg2Si合金の析出組織の高分解能透過型電顕観察, 日本金属学会誌, Vol. 62, No. 2, pp. 133-139, Feb. 1998.
• Shoichi Hirosawa, Tatsuo Sato, Junichi Yokota, Akihiko Kamio. Comparison Between Resistivity Changes and Monte Carlo Simulation for GP Zone Formation in Al-Cu Base Ternary Alloys, Materials Transactions, JIM, Vol. 39, No. 1, pp. 139-146, Jan. 1998.
• AKIHIKO KAMIO. Ignition prevention of magnesium by simultaneous addition of calcium and zirconium, International Journal of Cast Metals Research, Vol. 10, pp. 345-351, 1998.
• 田原和典, 鄭 秉準, 手塚裕康, 里 達雄, 神尾彰彦. 結晶微細化した亜共晶Al-Si-Cu合金の半溶融加圧鋳造組織と機械的性質, 軽金属, Vol. 47, No. 11, pp. 620-625, Nov. 1997.
• 里 達雄, 植田菜摘, 神尾彰彦. Cu-Ni-Sn合金の変調構造および不連続析出に及ぼすMn添加の影響, 伸銅技術研究会誌, Vol. 36, pp. 65-74, Aug. 1997.
• 松田健二, 蒲田裕志, 藤井 要, 吉田朋夫, 里 達雄, 神尾彰彦, 池野 進. Al-Mg2Si系合金における準安定相の高分解能電子顕微鏡観察, 軽金属, Vol. 47, No. 8, pp. 493-499, Aug. 1997.
• R.M.Gomes, TATSUO SATO, AKIHIKO KAMIO. Microstructures and coarsening behavior of silicon particles in P/M Al-Si-Cu-Mg alloys containing Fe and Ni, Journal of Japan Light Metalls, Vol. 47, No. 2, pp. 90-97, Feb. 1997.
• AKIHIKO KAMIO. Semi-solid solidification structure and mechanical properties of grain-refined hypoeutectic Al-Si-Cu alloy, Journal of Japan Light Metals, Vol. 47, No. 11, pp. 620-625, 1997.
• AKIHIKO KAMIO. Semi-solid solidification microstructure of a strain-induced Al-7% Si-0.5% Mg alloy, Journal of Japan Light Metals, Vol. 47, No. 11, pp. 626-631, 1997.
• AKIHIKO KAMIO. Mechanical Properties and Fracture Process of SiCw/Mg Composites Produced by Squeeze Casting and Extrusion, Mater. Trans. of JIM, Vol. 38, No. 1, pp. 18-27, 1997.
• Shoichi HIROSAWA, Tatsuo SATO, Akihiko KAMIO, Kazuhiro KOBAYASHI, Toshimasa SAKAMOTO. Effects of additional elements and quenching conditions on the T1 phase precipitation in Al-1.3%Li-5.5%Cu-0.13%Zr Alloys (Translation), Light Metals Review, Vol. 4, pp. 14-20, 1997.
• 洪 性吉, 崔 政喆, 林 徳仲, 手塚裕康, 里 達雄, 神尾彰彦. SiCウィスカ強化Al-CuおよびAl-Cu-Mg合金基複合材料の時効硬化挙動, 日本金属学会誌, Vol. 60, No. 6, pp. 569-576, June 1996.
• 張 茂勲, 陳 暁, 銭 匡武, 洪 性吉, 手塚裕康, 里 達雄, 神尾彰彦. Al2O3-SiO2繊維強化アルミニウム合金複合材料の組織及び機械的性質, 鋳造工学, Vol. 68, No. 5, pp. 411-416, May 1996.
• 廣澤渉一, 里 達雄, 神尾彰彦, 小林一徳, 坂本敏正. Al-1.3%Li-5.5%Cu-0.13%Zr系合金におけるT1相の粒内析出に及ぼす微量添加元素および焼入れ条件の影響, 軽金属, Vol. 46, No. 3, pp. 119-125, Mar. 1996.
• AKIHIKO KAMIO. Analysis of Thermal residual Stresses in Unidirectionally Aligned SiCw/Al-Alloy Matrix Composites by X-Ray Diffraction, Materials Transactions,JIM, Vol. 37, No. 3, pp. 230-238, 1996.
• AKIHIKO KAMIO. Mechanism of Macro-Segregation Formation in Sic Whisker Reinforced Aluminum Alloys Composites Fabricated by Squeeze Casting, Journal of Japan Institute of Metals, Vol. 60, No. 2, pp. 218-224, 1996.
• AKIHIKO KAMIO. Effect of Thermal Residual Stress on Mechanical Properties of SiC Whisker Reinforced Al-Mg and Al-Li Alloys Composites, Materials Transactions,JIM, Vol. 37, No. 5, pp. 975-982, 1996.
• AKIHIKO KAMIO. Precipitation Strengthening and Mechanical Properties of Hypereutectic P/M Al-Si-Cu-Mg Alloys Containing Fe and Ni, Proc. of the 5th International Conference on Aluminum Alloys, pp. 789-794, 1996.
• Kenji Matsuda, Shizuo Tada, Susumu Ikeno, Tatsuo Sato, Akihiko Kamio. CRYSTAL SYSTEM OF ROD-SHAPED PRECIPITATES IN AN Al-1.0mass%Mg2Si-0.4mass%Si ALLOY, Scripta Met.. Mater., Vol. 32, No. 8, pp. 1175-1180, Aug. 1995.
• 藤原英道, 里 達雄, 神尾彰彦. Cu-1 mass%Fe合金の析出挙動に及ぼすりん微量添加の影響, 日本金属学会誌, Vol. 59, No. 5, pp. 502-511, May 1995.
• 細田秀樹, 里 達雄, 手塚裕康, 三島良直, 井上漢龍, 神尾彰彦, 篠田哲守. 遷移金属トリアルミナイドAl3Nbの欠陥構造と添加元素置換サイトの擬基底状態解析による計算, 軽金属, Vol. 44, No. 11, pp. 675-681, Nov. 1994.
• 細田秀樹, 里 達雄, 手塚裕康, 三島良直, 神尾彰彦. Al-Li合金中のL12型Al3Li準安定相における添加元素置換挙動, 日本金属学会誌, Vol. 58, No. 8, pp. 865-871, Aug. 1994.
• AKIHIKO KAMIO. Effect of Thermal Stress on Mechanical Properties of SiCw Reinforced Al Matrix Composites, Proc. of 4th Int. Conf. on Aluminum Alloys, Vol. 4, No. 2, pp. 698-705, 1994.
• AKIHIKO KAMIO. Influence of Peritectic Elements on Microsegregation, Homogenization and Precipitation in Cast Aluminum Alloy, Proc. of 4th Int. Conf. on Aluminum Alloys, Vol. 4, No. 1, pp. 652-659, 1994.
• AKIHIKO KAMIO. Formation of Solidification Structure and Solid-Liquid Interfacial Morphology in Monotectic Solidification, Journal of Japan Society for Heat Treatment, Vol. 34, No. 4, pp. 198-202, 1994.
• AKIHIKO KAMIO. Formation of Microstructure in Stirecast Zn-22%Al Alloy, Journal of Japan Foundrymen's Society, Vol. 65, No. 8, pp. 621-626, 1993.
• AKIHIKO KAMIO. Development of ceramic mold for Al-Li alloy castings, Journal of Japan Light Metals, Vol. 43, No. 11, pp. 630-635, 1993.
• AKIHIKO KAMIO. Age hardening behavior in SiCw/Al-Li-Cu alloy Composites, Journal of Japan Light Metals, Vol. 43, No. 6, pp. 328-334, 1993.
• 里 達雄, 高橋 功, 手塚裕康, 神尾彰彦. Mg-Y合金の時効析出組織, 軽金属, Vol. 42, No. 11, pp. 804-809, Nov. 1992.
• 神尾彰彦, 村上 雄, 里 達雄, 中村 桂. Cu-Ni-Ti-Sn合金の時効析出挙動, 伸銅技術研究会誌, Vol. 31, pp. 128-134, Aug. 1992.
• 小林一徳, 大崎修平, 神尾彰彦, 里 達雄, 辻 美紘. 微量Znを添加したAl-Li系合金の耐食性, 軽金属, Vol. 42, No. 4, pp. 211-216, Apr. 1992.
• 横田耕太郎, 小松原俊雄, 里 達雄, 神尾彰彦. Al-Mg-Si系合金のセレーションに及ぼす熱処理条件とCu添加の影響, 軽金属, Vol. 42, No. 3, pp. 149-154, Mar. 1992.
• AKIHIKO KAMIO. Precipitation structure of Mg-Y alloys, Journal of Japan Light Metals, Vol. 42, No. 12, pp. 804-809, 1992.
• AKIHIKO KAMIO. High Temperature Deformation Behavior in Rapidly Solidified Al-Fe Alloys, Proc. of 3rd Int. Conf. on Aluminum Alloys, Vol. 3, No. 1, pp. 117-122, 1992.
• Tatsuo Sato, Akihiko Kamio. High Resolution Microscopy on the Ordered Phase in Al-Li Alloys, Aluminium-Lithium, Vol. 1, pp. 57-62, 1992.
• Kazunori Kobayashi, Shuhei Ohsaki, Akihiko Kamio, Tatsuo Sato, Yoshihiro Tsuji. Effect of Zn Addition on Corrosion Resistance of 2090 and 2091 Alloys, Aluminium-Lithium, Vol. 2, pp. 673-678, 1992.
• AKIHIKO KAMIO. Structure change and softening behavior of Al-8mass%Fe alloy extrudates prepared from rapidly solidified ribbons, Journal of Japan Light Metals, Vol. 42, No. 1, pp. 27-32, 1992.
• Tatsuo Sato, Akihiko Kamio. Ordered Structures in the Early Stage of Decomposition in an Al-7.9at%Li alloy, Materials Transactions of Japan Institute of Metals, Vol. 31, No. 1, pp. 25-30, Jan. 1990.
• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong Long, 高橋恒夫. Al-Fe合金の急冷凝固組織と相分解, 軽金属, Vol. 36, No. 2, pp. 72-80, Feb. 1986.
• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong LONG, 高橋恒夫. Al-Fe-Ce合金の急冷凝固組織と相分解, 軽金属, Vol. 35, No. 8, pp. 439-446, Aug. 1985.

著書

• 神尾彰彦. 金属材料活用事典（編集，分担）, 産業調査会, 産業調査会, 1999.
• 神尾彰彦. 新版非鉄金属材料の選択のポイント（編集，分担）, 日本規格協会, 日本規格協会, 1995.
• AKIHIKO KAMIO. New Age in Aluminum Materials, Kogyo chosa kai Co. Ltd., Kogyo chosa kai Co. Ltd., 1993.

国内会議発表 (査読なし・不明)

• 神尾彰彦, 手塚裕康, 里 達雄, Than Trong Long, 高橋恒夫. 急冷凝固したAl-Cu合金の組織と相分解, 軽金属, Vol. 35, No. 5, pp. 275-281, May 1985.

学位論文

• 高鉛青銅の凝固に関する研究,  本文,  Doctor of Engineering,  早稲田大学,  1969/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]