|
|
仲井正昭 研究業績一覧 (10件)
- 2024
- 2023
- 2022
- 2021
- 2020
  - 全件表示
論文
-
Junko Hieda,
Mitsuo Niinomi,
Masaaki Nakai,
Ken Cho.
In vitro biocompatibility of Ti–Mg alloys fabricated by direct current magnetron sputtering,
Materials Science and Engineering: C,
54,
1-7,
Sept. 2015.
-
Yilmazer Hakan,
Mitsuo niinomi,
Ken Cho,
Masaaki Nakai,
Junko Hieda,
Shigeo Sato,
Yoshikazu Todaka.
Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion,
Acta Materialia,
80,
172–182,
Nov. 2014.
-
Ken Cho,
Mitsuo Niinomi,
Masaaki Nakai,
Junko Hieda,
Pedro Fernandes Santos,
Yoshinori Itoh,
Masahiko Ikeda.
Microstructures, and Biocompatibility of Low-Cost β-Type Ti-Mn Alloys for Biomedical Application,
Biomaterials Science: Processing, Properties and Applications IV: Ceramic Transactions,
251,
21-30,
Sept. 2014.
-
Yonghwan Kim,
Mitsuo Niinomi,
Junko Hieda,
Masaaki Nakai,
Ken Cho,
Hisao Fukui.
Hardening behavior after high-temperature solution treatment of Ag-20Pd-12Au-xCu alloys with different Cu contents for dental prosthetic restorations,
Journal of the Mechanical Behavior of Biomedical Materials,
35,
123-131,
July 2014.
-
Huihong Liu,
Mitsuo Niinomi,
Masaaki Nakai,
Junko Hieda,
Ken Cho.
Changeable Young's modulus with large elongation-to-failure in beta-type titanium alloys for spinal fixation applications,
Scripta Materialia,
82,
29-32,
July 2014.
-
Huihong Liu,
Mitsuo Niinomi,
Masaaki Nakai,
Junko Hieda,
Ken Cho.
Bending springback behavior related to deformation-induced phase transformations in Ti-12Cr and Ti-29Nb-13Ta-4.6Zr alloys for spinal fixation applications,
Journal of the Mechanical Behavior of Biomedical Materials,
34,
66-74,
July 2014.
-
Mitsuo Niinomi,
Masaaki Nakai,
Junko Hieda,
Ken Cho,
Toshihiro Kasuga,
Takashi Goto,
Tomokazu Hattori,
Takao Hanawa.
A review of surface modification of a novel low modulus β-type titanium alloy for biomedical applications,
International Journal of Surface Science and Engineering,
8,
2-3,
138-152,
2014.
国際会議発表 (査読有り)
-
Junko Hieda,
Mitsuo Niinomi,
Masaaki Nakai,
Ken Cho,
Takao Hanawa,
Hirokazu Katsui,
Rong Tu,
Takashi Goto.
Biomedical surface modification of beta-type titanium alloy for implants with surface morphology control,
The 15th International Symposium on Biomimetic Materials Processing (BMMP15),
Jan. 2015.
-
Kei Takahashi,
Eri Takematsu,
Masaaki Nakai,
Mituo Niinomi,
Nobuhiro Matsushita.
Evaluation of Adhesive Strength between TNTZ Alloy and Bioactive Titanium Oxide Layer Fabricated by Solution Processes,
the International Symposium on EcoTopia Science '15,
2015.
国内会議発表 (査読なし・不明)
[ BibTeX 形式で保存 ]
[ 論文・著書をCSV形式で保存
]
[ 特許をCSV形式で保存
]
|
各種検索
サポート
ヘルプ