論文

• Kazuya Fujita, Kosuke Suzuki, Keisuke Asano, Chun-Yi Chen, Tomoyuki Kurioka, Katsuyuki. Machida, Hiroyuki Ito, Yoshihiro Miyake, Masato Sone, Tso-Fu Mark Chang. Simultaneous Necking and Barreling Deformation Behaviors in Bending of Single Crystal Gold Micro-Cantilever, Materials, MDPI, Vol. 17, No. 16, p. 4054, Aug. 2024.  公式リンク  
  
• Ryohei Hori, Kazuya Fujita, Chun Yi Chen, Tomoyuki Kurioka, Tso-Fu Mark Chang, Katsuyuki Machida, Hiroyuki Ito, Yoshihiro Miyake, Masato Sone. Cross-Sectional Geometry Effect on Bending Strength of Gold Micro-Cantilever with Trapezoidal Cross-Section, Micro and Nano Engineering, Vol. 23, p. 100259, May 2024.  公式リンク  
  

国際会議発表 (査読有り)

• Masato Sone, Ryohei Hori, Kazuya Fujita, Kosuke Suzuki, Ken Hashigata, Keisuke Asano, Tomoyuki Kurioka, Tso-Fu Mark Chang, Chun-Yi Chen, Katsuyuki Machida, Hiroyuki Ito, Yoshihiro Miyake. Effects of Sample Geometry and Grain Size on Mechanical Property of Electrodeposited Dold and Gold-Copper Alloys by Micro-\bending Test Toward MEMS Applications, CPIT2024, New Method of Damage and Failure Analysis of Structural Part, CPIT2024, New Method of Damage and Failure Analysis of Structural Part, CPIT2024, New Method of Damage and Failure Analysis of Structural Part, Oct. 2024.
• Ryohei Hori, Kazuya Fujita, Chun-Yi Chen, Tomoyuki Kurioka, Tso-Fu Mark Chang, Parthojit Chakraborty, Katsuyuki Machida, Hiroyuki Ito, Yoshihiro Miyake, Masato Sone. Evaluation of Cross-Sectional Geometry Effect of Au Polycrystalline Micro-cantilever on Bending Strength, Taiwan Association for Coating and Thin Film Technology (TACT2023), Taiwan Association for Coating and Thin Film Technology (TACT2023), Nov. 2023.
• Ryohei Hori, Kazuya Fujita, Chun Yi Chen, Tomoyuki Kurioka, Tso-Fu Mark Chang, Parthojit Chakraborty, Katsuyuki Machida, Hiroyuki Ito, Yoshihiro Miyake, Masato Sone. Effects of Cross-Sectional Geometry in Bending Test of Gold Micro-Cantilever toward Design of Movable MEMS Components, 48th international conference on Micro and Nano Engineering - Eurosensors (MNE-ES), Sept. 2022.
• Kazuya Fujita, Kosuke Suzuki, Chun-Yi Chen, Tso-Fu Mark Chang, Hiroyuki Ito, Katsuyuki Machida, Kazuya Masu, Masato Sone. Micro-Mechanical Property of Single Crystal Gold for Applications in Microelectronics, TACT2021 International Thin Films Conference, TACT2021 International Thin Films Conference, Nov. 2021.
• Kazuya Fujita, Kosuke Suzuki, Chun-Yi Chen, Tso-Fu Mark Chang, Daisuke Yamane, Hiroyuki Ito, Katsuyuki Machida, Kazuya Masu, Masato Sone. Mechanical Property of Gold Micro-Cantilevers for Application in Microelectronics and the Sample Geometry Effect, Micro and Nano Engineering Conference 2021 (MNE2021), Sept. 2021.
• Kazuya Fujita, Kosuke Suzuki, Chun-Yi Chen, Tso-Fu Mark Chang, Hiroyuki Ito, Katsuyuki Machida, Kazuya Masu, Masato Sone. Effects of Sample Geometry on Micro-Mechanical Property of Single Crystal Gold for Applications in Microelectronics, PRiME 2020, PRiME 2020, Oct. 2020.

国内会議発表 (査読有り)

• 保里 亮平, 藤田 一矢, Chun-Yi Chen, 栗岡 智行, Tso-Fu Mark Chang, Parthojit Chakraborty, 町田 克之, 伊藤 浩之, 三宅 美博, 曽根 正人. 単結晶金微小カンチレバーの曲げ強度に対する断面積の影響, 第70回応用物理学会春季学術講演会, 第70回応用物理学会春季学術講演会, p. 16a-B410-4, Mar. 2023.
• 保⾥ 亮平, 藤⽥ ⼀⽮, Chun-Yi Chen, Tso-Fu Chang, 伊藤浩之, 町⽥克之, 三宅美博, 曽根正⼈. Au単結晶の微⼩カンチレバーの機械的特性における断⾯形状依存性, 2022年応⽤物理学会春季講演会, Mar. 2022.
• 藤田 一矢, 鈴木 康介, 陳 君怡, Chang Tso-Fu Mark, 山根 大輔, 伊藤 浩之, 町田 克之, 益 一哉, 曽根 正人. 金単結晶微小カンチレバーの機械的特性とサンプル形状効果, 第82回応用物理学会秋季学術講演会, 第82回応用物理学会秋季学術講演会, Sept. 2021.

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]