|
Publication List - JIANGZHU 2014 (14 / 198 entries)
Journal Paper
-
Nitin Sharma,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation,
Advanced Materials Research,
Trans Tech Publications, Switzerland,
Vol. 1017,
pp. 141-146,
Sept. 2014.
Official location
-
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining,
Advanced Materials Research,
Trans Tech Publications, Switzerland,
Vol. 1017,
pp. 281-286,
Sept. 2014.
Official location
-
JIANG Zhu,
AKIMITSU Hozumi,
TOMOHISA Tanaka,
Yoshio Saito.
High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision,
Key Engineering Materials,
Trans Tech Publications, Switzerland,
Vol. 625,
pp. 372-377,
Aug. 2014.
Official location
-
Yuanrui Zhang,
Shigenobu Nagase,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Positioning calibration of a parallel mechanism worktable with 6-DOF,
Key Engineering Materials,
Trans Tech Publications, Switzerland,
Vol. 625,
pp. 392-397,
Aug. 2014.
Official location
International Conference (Reviewed)
International Conference (Not reviewed / Unknown)
-
Yasunori Sakai,
JIANG ZHU,
TOMOHISA TANAKA,
Hayato Yoshioka,
YOSHIO SAITO.
Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction,
the 16th International Machine Tool Engineers` Conference,
Proceeding of the 16th International Machine Tool Engineers` Conference,
Japan Machine Tool Builders' Association,
Nov. 2014.
-
yuanrui zhang,
JIANG ZHU,
Hayato Yoshioka,
YOSHIO SAITO,
TOMOHISA TANAKA.
Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable,
the 16th International Machine Tool Engineers` Conference,
Proceeding of the 16th International Machine Tool Engineers` Conference,
Japan Machine Tool Builders' Association,
Nov. 2014.
Domestic Conference (Not reviewed / Unknown)
-
Yasunori Sakai,
JIANG ZHU,
田中智久,
Hayato Yoshioka,
YOSHIO SAITO.
Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway,
第10回 日本機械学会生産加工・工作機械部門講演会,
pp. 97-98,
Nov. 2014.
-
Mikiya HARA,
Jiang ZHU,
Tomohisa TANAKA,
Yoshio SAITO.
Study on Effect of Cutting Parameter on Cutting Resistance in the Milling of Polytetrafluoroethylene,
2014年度砥粒加工学会学術講演会,
2014年度砥粒加工学会学術講演会論文集,
公益社団法人 砥粒加工学会,
Sept. 2014.
-
Nitin Sharma,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
3D Model Registration Based on Feature Extraction Using Segmentation,
2014年度精密工学会春季大会学術講演会,
2014年度精密工学会春季大会学術講演会講演論文集,
Mar. 2014.
-
Shinya Oishi,
TOMOHISA TANAKA,
JIANG ZHU,
YOSHIO SAITO.
Study on Laser Forming Mechanism of Stainless Wire,
日本機械学会生産システム部門研究発表講演会2014,
日本機械学会生産システム部門研究発表講演会2014講演論文集,
日本機械学会,
No. 14-8,
pp. 105-106,
Mar. 2014.
-
Naoki Maeda,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Fabrication of three-dimensional laminate of thin metal wire using a laser,
日本機械学会生産システム部門研究発表講演会2014,
日本機械学会生産システム部門研究発表講演会2014講演論文集,
日本機械学会,
No. 14-8,
pp. 107-108,
Mar. 2014.
-
Yasunori Sakai,
Toshiki Hanaoka,
JIANG ZHU,
YOSHIO SAITO,
TOMOHISA TANAKA.
加振力振幅が直動転がり案内の動特性に及ぼす影響,
2014年度精密工学会春季大会学術講演会,
2014年度精密工学会春季大会学術講演会講演論文集,
Mar. 2014.
-
Yuki Koike,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化,
2014年度精密工学会春季大会学術講演会,
2014年度精密工学会春季大会学術講演会講演論文集,
Mar. 2014.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|