Journal Paper

• Arisa Torii, Hayato Yoshioka, Shingo Tajima, HIDENORI SHINNO. ハイパースペクトルデータを用いためっき加工状態の認識および加工面の定量的評価, 日本機械学会論文集, Vol. 86, No. 892, pp. 1-18, Dec. 2020.
• Asako Sakataya, Hayato Yoshioka, Shingo Tajima, HIDENORI SHINNO. ファイバレーザを用いた鉄系材料に対する面取り, 日本機械学会論文集, Vol. 86, No. 892, pp. 1-13, Dec. 2020.
• Hayato Yoshioka, Kotaro Kojima, Daisuke Toyota. Micro patterning on curved surface with a fast tool servo system for micro milling process, CIRP Annals - Manufacturing Technology, Vol. 69, pp. 325-328, May 2020.
• Makoto KATO, Daisuke KONO, Hayato YOSHIOKA, Naohiko SUGITA, Akihide HAMAGUCHI, Kazumasa KONO, Kazunori IIJIMA, Yasuhiro KAKINUMA. Thermal error and energy-saving performance evaluation of the energy-saving machine tool using new structural materials, 日本機械学会論文集, Vol. 86, No. 884, p. 20-00002, Apr. 2020.
• Yuta Showa, Hayato Yoshioka, Hidenori Shinno. Reduction of the influence on machining surface caused by tool non-repeatable run-out of rolling bearing spindle for machine tools (Development of an excitation system), 日本機械学会論文集, Vol. 86, No. 884, p. 19-00450, Apr. 2020.

International Conference (Reviewed)

• Showa, Y., Yoshioka, H.. Reduction of the influence on machining surface caused by tool nonrepeatable run-out of rolling bearing spindle for machine tools –Evaluation of effectiveness of NRRO reduction on machining surface by an excitation system-, 18th International Conference on Precision Engineering (ICPE2020), Proceedings of ICPE2020, pp. C-1-12, Nov. 2020.
• Tajima, S., Sencer, B., Yoshioka, H.. Kinematic smoothing for singularity avoidance in 5-axis machining, 18th International Conference on Precision Engineering (ICPE2020), Proceedings of ICPE2020, pp. C-1-9, Nov. 2020.
• Yoshioka, H., Saito, S., Kato, J., Shinno, H., Goto, S., Hori, N.. Improvement of thermal deformation in a newly developed steel CFRP composite ball screw, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), June 2020.
• Tajima, S., Sencer, B., Yoshioka, H., Shinno, H.. Smooth path blending for 5-axis machining, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEMP2020), June 2020.

Domestic Conference (Not reviewed / Unknown)

• Satoshi Iwamoto, Hayato Yoshioka, Shingo Tajima, HIDENORI SHINNO. 反力利用形カウンタウェイト機構における外乱応答特性, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, B0107, Sept. 2020.
• Hayato Yoshioka, Junya Hashimoto, Shingo Tajima, HIDENORI SHINNO. CFRPの繊維配向を考慮した工作機械テーブルの検討, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, B0101, Sept. 2020.
• Naotoshi Oyama, Hayato Yoshioka, 奥山弥生, Shingo Tajima, 江草 宏, HIDENORI SHINNO. 光切断法を用いた人工歯形状評価法, 2020年度精密工学会秋季大会学術講演会, 2020年度精密工学会秋季大会学術講演会講演論文集, E0102, Sept. 2020.

[ Save as BibTeX ]    [ Paper, Presentations, Books, Others, Degrees: Save as CSV ]    [ Patents: Save as CSV ]