|
佐藤海二 2011年 研究業績一覧 (13件 / 277件)
論文
-
Kaiji Sato.
Practical and Intuitive Controller Design for Precision Motion - AR-CM NCTF Control of Ball Screw Mechanism,
International Journal of Automation Technology,
Fuji Technology Press,
vol. 5,
no. 6,
pp. 793-799,
Nov. 2011.
-
Kaiji Sato,
Kazutoshi Okutsu.
Basic Characteristics of a Micromechanical Optical Switch Using an S-Shaped Deformable Thin-Film Mirror,
Journal of Lightwave Technology,
the Institute of Electrical and Electronics Engineers,
vol. 29,
no. 18,
pp. 2805-2811,
Sept. 2011.
-
Shin-Horng Chong,
Kaiji Sato.
Practical motion control with acceleration reference for precision motion—New NCTF control and its application to non-contact mechanism,
Precision Engineering,
Elsevier,
Vol. 35,
No. 1,
pp. 12-23,
Jan. 2011.
国際会議発表 (査読有り)
-
Kaiji Sato.
Precision Motion Control of Ultrahigh-Acceleration and High-Velocity Linear Drive Mechanism,
26th Annual Meeting of the American Society for Precision Engineering,
Proc. of ASPE2011,
pp. 133-136,
Nov. 2011.
公式リンク
-
Kaiji Sato.
100G Linear Motor and its Precision Positioning,
the Eight Int. Symposium on Linear Drives for Industry Applications,
Proceedings of the Eight Int. Symposium on Linear Drives for Industry Applications,
July 2011.
公式リンク
-
Shin-Horng Chong,
Kaiji Sato.
Practical and Robust Control for Precision Positioning Systems,
IEEE International Conference on Mechatronics,
Proceedings of IEEE International Conference on Mechatronics (ICM2011),
the Institute of Electrical and Electronics Engineers,
Apr. 2011.
公式リンク
-
Mariam Md Ghazaly,
Kaiji Sato.
Evaluation of a Multilayer Electrostatic Actuator for a Fine Motion Stage without Precise Balls for Lubrication,
The 6th International Conference on MicroManufacturing (ICOMM 2011),
Proceedings of the 6th International Conference on Micromanufacturing (ICOMM2011),
Committees of ICOMM - 2011,
pp. 577-581,
Mar. 2011.
公式リンク
国際会議発表 (査読なし・不明)
-
Takaaki Oiwa,
Masahide Katuki,
Mituji Karita,
Wei Gao,
Susumu Makinouchi,
Kaiji Sato,
Yasuji Oohashi.
Questionnaire Survey on Ultra-precision Positioning,
11th Int. Conference of the European Society for Precision Engineering & Nanotechnology,
Proceedings of 11th Int. Conference of the European Society for Precision Engineering & Nanotechnology,
the European Society for Precision Engineering & Nanotechnology,
pp. 463-466,
May 2011.
公式リンク
国内会議発表 (査読なし・不明)
-
佐藤海二,
Mariam Md Ghazaly.
潤滑油で支持された多層構造静電アクチュエータの基礎特性と制御,
2011年度精密工学会秋季大会学術講演会,
2011年度精密工学会秋季大会学術講演会講演論文集,
精密工学会,
pp. 661-662,
Sept. 2011.
-
佐野裕介,
佐藤海二.
高精度空気圧サーボ系のための実用的かつ直感的な制御系設計,
2011年度精密工学会春季大会学術講演会,
2011年度精密工学会春季大会学術講演会講演論文集,
精密工学会,
pp. 469-470,
Mar. 2011.
-
佐藤海二.
直動機構の超高速化技術,
信州大学超精密技術センター総会,
信州大学超精密技術センター総会・特別講演会配布資料,
信州大学超精密技術センター,
Mar. 2011.
-
村口 洋介,
碇賀 厚,
栗山 義彦,
森下 明平,
井田 英二,
佐藤 海二.
産業用リニアドライブ技術と応用の変遷 -要素部品と要素技術の変遷-,
電気学会リニアドライブ研究会,
電気学会研究会資料 リニアドライブ研究会LD-11-010~021,
電気学会,
pp. 15-18,
Feb. 2011.
その他の論文・著書など
-
Takaaki Oiwa,
Masahide Katuki,
Mituji Karita,
Wei Gao,
Susumu Makinouchi,
Kaiji Sato,
Yasuji Oohashi.
Questionnaire Survey on Ultra-precision Positioning: Questionnaire Survey on Ultra-precision Positioning,
International Journal of Automation Technology,
Fuji Technology Press,
vol. 5,
no. 6,
pp. 766-722,
Nov. 2011.
[ BibTeX 形式で保存 ]
[ 論文・著書をCSV形式で保存
]
[ 特許をCSV形式で保存
]
|