論文

• Wataru Takarada, Mohammad A. Barique, Tatsuma Kunimitsu, Takao Kameda, TAKESHI KIKUTANI. Verification of the Influence of Processing History through Comparing High-Speed Melt Spinning Behavior of Virgin and Recycled Polypropylene, Polymers, Aug. 2022.  公式リンク  
  
• Ladan Eskandarian, Amirali Toossi, Farah Nassif, Sahar Golmohammadi Rostami, Siting Ni, Amin Mahnam, Milad Alizadeh Meghrazi, Wataru Takarada, TAKESHI KIKUTANI, Hani E. Naguib. 3D‐Knit Dry Electrodes using Conductive Elastomeric Fibers for Long‐Term Continuous Electrophysiological Monitoring, Advanced Materials Technologies, July 2022.  公式リンク  
  
• Zongzi Hou, Nahoko Itagaki, Haruki Kobayashi, Katsufumi Tanaka, Wataru Takarada, Takeshi Kikutani, Midori Takasaki. Bamboo Charcoal/Poly(L-lactide) Fiber Webs Prepared Using Laser-Heated Melt Electrospinning, Polymers, Vol. 13, No. 16, p. 2776, Aug. 2021.
• Wataru Takarada, Kenichi Sugimoto, Hajime Nakajima, Hendrikus A. Visser, Gert-Jan M. Gruter, Takeshi Kikutani. Melt-Spun Fibers from Bio-Based Polyester–Fiber Structure Development in High-Speed Melt Spinning of Poly(ethylene 2,5-furandicarboxylate) (PEF), Materials, Vol. 14, No. 5, p. 1172, May 2021.
• Kozo Iiba, Takarada, W., Kikutani, T.. Effect of Introducing Long Chain Branching on Fiber Diameter and Fiber Diameter Distribution in Melt Blowing Process of Polypropylene, International Polymer Processing, 2021.  公式リンク  
  
• Wataru Takarada, Sho Hatano, Takeshi Kikutani. Experimental and Numerical Analysis of Unstable Behavior of Melt Blowing Process, Journal of Fiber Science and Technology, 繊維学会, Vol. 76, No. 7, p. 208-216, July 2020.
• Saigusa, K., Takarada, W., Kikutani, T.. Improvement of the Mechanical Properties of Poly(Glycolic Acid) Fibers Through Control of Molecular Entanglements in the Melt Spinning Process, Journal of Macromolecular Science - Physics, 59, 6, 399-414, Mar. 2020.  公式リンク  
  
• Dong-Woo Go, Takarada Wataru, Aneja Arun, Kikutani Takeshi. Analysis of Fiber Structure and Properties of Drawn Fibers prepared by Cold Drawing in Ethanol and subsequent Hot Drawing, PPS-35, AIP Conference Proceedings, AIP Publishing, 2205, 020009, Jan. 2020.
• Tokuda, Tomoki, Tsuruda, Ryo, Hara, Takuya, Kobayashi, Haruki, Tanaka, Katsufumi, wataru takarada, TAKESHI KIKUTANI, Hinestroza, Juan P., Razal, Joselito M., Takasaki, Midori. Structure and Properties of Poly(ethylene terephthalate) Fiber Webs Prepared via Laser-Electrospinning and Subsequent Annealing Processes, Materials, 2020.  公式リンク  
  
• K. Saigusa, H. Saijo, M. Yamazaki, W. Takarada, T. Kikutani. Influence of carboxylic acid content and polymerization catalyst on hydrolytic degradation behavior of poly(glycolic acid) fibers, Polymer Degradation and stability, Dec. 2019.
• Nanjaporn Roungpaisan, Wataru Takarada, Takeshi Kikutani. Development of Polylactide Fibers Consisting of Highly Oriented stereocomplex Crystals Utilizing High-Speed Bicomponent Melt Spinning Process, Journal of Fiber Science and Technology, Vol. 75, No. 9, pp. 119-131, Sept. 2019.
• Yutaka Kawahara, Motohiro Hanada, Shota Onosato, Wataru Takarada, Midori Takasaki, Koji Takeda, Yoshimitsu Ikeda, Takeshi Kikutani. High-Speed Melt Spinnint of Polylactide/Poly(Butyleneterephthalate) Bicomponent Fibers: Mechanism of Fiber Structure Development and Dyeing Behavior, Journal of Macromolecular Science Part B Physics, Aug. 2019.
• Dongwoo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Continuous Drawing of Poly(ethylene terephthalate) in Ethanol and Agile Functionalization through Infusion, Materials Today Communications, Vol. 19, pp. 98-105, 2019.
• K. Kawai, W. Takarada, T. Kikutani. Effect of Mutual Interaction between High and Low stereo-Regularity Components on Structure Formation in Melt Spinning Process of Isotactic Polypropylene Blend Fibers, International Polymer Processing, Vol. 23, No. 3, pp. 387-396, June 2018.
• Natsumi Fukushi, Miku Yoshizawa, Shota Onosato, Motohiro Hanada, Midori Takasaki, Wataru Takarada, Yutaka Kawahara, Takeshi Kikutani, Haruki Kobayashi, Katsufumi Tanaka. Analysis of Multiple Melting of High-Speed Melt Spun Polylactide Fibers Based on Kinetic Modeling, Journal of Macromolecular Science Part B Physics, Feb. 2018.
• Charinee Winotapun, Noppadon Kerddonfag, Witchuda Daud, Wannee Chinsirikul, Wataru Takarada, Takeshi Kikutani. Effect of biaxial-simultaneous stretching conditions on OTR and CO2 permeation of CO2 laser peerforated poly(lactic acid) film, Packaging Technology and Science, Vol. 31, pp. 545-556, 2018.
• Charinee Winotapun, Utaiwan Watcharosin, Noppadon Kerddonfag, Wannee Chinsirikul, Wataru Takarada, Takeshi Kikutani. Microhole Formation Behavior of Polypropylene Film Using CO2 Laser Irradiation, Journal of Fiber Science and Technology, Vol. 73, No. 10, pp. 240-250, Oct. 2017.
• Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani. Effect of Processing Conditions on Heat Seal Strength for Peelable Heat Sealing of Multilayered Polyethylene Films with Different Sealant Layers, Journal of Macromolecular Science Part B Physics, Vol. 56, No. 9, pp. 709-723, Sept. 2017.
• Solven Rungiah, Renukarn Ruamsuk, Philippe Vroman, Eataru Takarada, Jean-Christophe Appert-Collin, Takeshi Kikutani. Structural characterization of polypropylene/poly(lactic acid) bicomponent meltblown, Journal of Applied Polymer Science, Vol. 134, June 2017.
• Midori Takasaki, Natsumi Fukushi, Miku Yoshizawa, Shota Onosato, Motohiro Hanada, Wataru Takarada, Yutaka Kawahara, Takeshi Kikutani, Haruki Kobayashi, Katsufumi Tanaka. Multiple Melting Behavior of High-Speed Melt Spun Polylactide Fibers, Journal of Macromolecular Science Part B Physics, Vol. 56, No. 3, pp. 143-160, Mar. 2017.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Fiber Structure Development of PHBH through Stress-Induced Crystallization in High-speed Melt Spinning Process, Journal of Fiber Science and Technology, Vol. 73, No. 2, pp. 49-60, Feb. 2017.
• Toshiharu Iwasaki, Wataru Takarada, Takeshi Kikutani. Influence of processing conditions on heat sealing behavior and resultant heat seal strength for peelable heat sealing of multilayered polyethylene films, Journal of Polymer Engineering, Vol. 36, No. 9, pp. 909-916, Sept. 2016.
• Chen Yiwen, Takarada Wataru, Takeshi Kikutani. Effect of Corss-sectional Configuration on Fiber Formation Behavior in the Vicinity of Spinning Nozzle in Bicomponent Melt spinning Process, Journal of Fiber Science and Technology, Vol. 72, No. 7, pp. 154-159, July 2016.
• R. Ruamsuk, W.Takarada, T. Kikutani. Fine Filament Formation Behavior of Polymethylpentene and Polypropylene near Spinneret in Melt Blowing Process, International Polymer Processing, Vol. 31, No. 2, pp. 217-223, Apr. 2016.
• Yutaka Kawahara, Taiyo Yoshioka, Wataru Takarada, takeshi Kikutani, Masaki Tsuji. Alkaline Hydrolysis Kinetics of Poly(ethylene terephthalate) Fibers, Journal of Fiber Science and Technology, Vol. 72, No. 1, pp. 9-16, Jan. 2016.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層ポリエチレンフィルムのピーラブルシールにおけるシール後の冷却条件と滅菌処理前後のシール強度変化の関係, 成形加工, Vol. 28, No. 1, pp. 34-40, Jan. 2016.
• 河原 豊, 藤井 秀彰, 宝田亘, 鞠谷雄士, 桑原 伸夫. 樹状構造を発現した液状絹エアロゲルの構造, 日本シルク学会誌, 日本シルク学会, Vol. 24, pp. 5-10, 2016.
• R. Khanum, D. W. Go, W. Takarada, A. Aneja, T. Kikutani. Effect of Drawing Speed on Infusion and Drawing Behavior of Poly(ethylene terephthalate) Filaments upon Cold Drawing, Sen'i Gakkaishi, Vol. 71, No. 9, pp. 273-283, Sept. 2015.
• Rina Khanum, Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Role of ethanol concentration on drawing and infusion behavior of poly(ethylene terephthalate) filaments upon cold drawing, Polymer, 70, 19-29, June 2015.
• Yuan Jing Zhang, Wataru Takarada, Takeshi Kikutani. Fabrication of Fiber-Reinforced Single-Polymer Composites through Compression Molding of Bicomponent Fibers Prepared by High-Speed Melt Spinning Process, Sen'i gakkaishi, The Society of Fiber Science and Technology, Japan, Vol. 71, No. 5, pp. 172-179, May 2015.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Structure and properties of low-isotacticity polypropylene elastomeric fibers prepared by sheath-core bicomponent spinning: effect of localization of high-isotacticity component near the fiber surface, Journal of Polymer Engineering, volume 35, 3, pp. 277- 285, Mar. 2015.
• Rina Khanum, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Crystallization of poly(ethylene terephthalate) filaments by infusion of ethanol upon cold drawing, Polymer, Elsevier, 59, 26-34, Jan. 2015.
• 辻 佳宏, 小島 潤一, 鞠谷雄士, 櫻井 伸一. 電子密度をマッチングさせた浸漬液中での小角X線散乱測定による高速紡糸ポリエチレンテレフタレート繊維の高次構造解析, 材料, The Society of Materials Science, Japan, Vol. 64, No. 1, pp. 11-17, 2015.
• T.Abe, W. Takarada, T. Kikutani. Effects of pre-annealing on the uni- and bi-axial stretching behavior of poly(ethylene naphthalate) films, AIP Conference Proceedings, AIP Publishing, 1593, pp. 68-71, Oct. 2014.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Structure and Properties of Low-Isotacticity Polypropylene Elastomeric Fibers Prepared by Sheath-Core Bicomponent Spinning - Effect of the Composition of Sheath Layer with Constant High-Isotacticity Polypropylene Content -, Sen'i Gakkaishi, Vol. 70, No. 9, pp. 203-212, Sept. 2014.
• Shahin Kazemi, Mohammad Reza Mohaddes Mojtahedi, Wataru Takarada, Takeshi Kikutani. Morphology and Crystallization Behavior of Nylon 6-Clay/Neat Nylon 6 Bicomponent Nanocomposite Fibers, Journal of Applied Polymer Science, John Wiley & Sons, vol. 131, no. 6, p. 39996, 2014.
• Radon Dhelika, Kenji Sawai, Kunio Takahashi, Wataru Takarada, Takeshi Kikutani, Shigeki Saito. Electrostatic chuck consisting of polymeric electrostatic inductive fibersfor handling of objects with rough surfaces, Smart Materials and Structures, No. 22, pp. 9, Aug. 2013.  公式リンク  
  
• Xiaoshi Xu, Yutaka Shirakashi, Junya Ishibashi, Wataru Takarada, Takeshi Kikutani. Evaluation of surface roughness development of polyamide 6/poly(ethylene terephthalate) blend fibers through fiber diameter measurement using three types of optical equipment, Textile Research Journal, vol. 83, no. 19, pp. 2042-2050, May 2013.
• 西村浩和, 清雅樹, 千塚健史, 増田正人, 山崎斉, 小島潤一, 山本勝宏, 岡本茂, 中前勝彦, 小寺賢, 鞠谷雄士, 櫻井伸一. PET高速溶融紡糸過程のオンライン広角Ｘ線散乱測定, 材料, Vol. 62, No. 1, pp. 8-12, Jan. 2013.
• Shigeki SAITO, Fumiaki Soda, Radon Dhelika, KUNIO TAKAHASHI, wataru takarada, TAKESHI KIKUTANI. Compliant electrostatic chuck based on hairy microstructure, Smart Materials and Structures, IOP Publiching, Vol. 22, pp. 015019(1-6), Dec. 2012.
• X.Xu, Y.Shirakashi, J.Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blend Fibers for Artificial Hair, Textile Research Journal, Vol. 82, No. 13, pp. 1382-1389, June 2012.
• Nakata, K., Nakamura, F., Ohkoshi, Y., Gotoh, Y., Nagura, M., Hamano, A., Takada, S., TAKESHI KIKUTANI. High-strength PET fibers produced by conjugated melt spinning and laser drawing, International Polymer Processing, Vol. 27, No. 3, pp. 386-391, 2012.
• 白樫豊, 朝倉修, 伊藤伸司, 石橋準也, 徐暁師, 宝田亘, 鞠谷雄士. ポリアミド６を主成分とする人工毛髪用表面粗面化ブレンド繊維の開発, 成形加工, Vol. 23, No. 6, pp. 358-364, May 2011.
• M. Masuda, W. Takarada, T. Kikutani. Effect of Control of Polymer Flow in the Vicinity of Spinning Nozzle on Mechanical Properties of Poly(ethylene terephthalate) Fibers, International Polymer Processing, Hanser, Vol. 25, No. 2, pp. 159 - 169, Apr. 2010.
• Taiyo Yoshioka, Yutaka Kawahara, Takeshi Kikutani, Masaki Tsuji. Stacked-lamellar structure in high-speed spun PET fibers as revealed by TEM, Journal of Macromolecular Science, Part B: Physics, vol. 49, No. 1, pp. 155-162, Jan. 2010.
• W.-G.Hahm, W. Takarada, H. Ito, T. Kikutani. On-line Measurement Studies on Orientation Development and Characrteristic Short-Period Diameter Fluctuation in High Speed In-line Drawing of Poly(ethylene terephthalate) Fiber, International Polymer Processing, Vol. 24, No. 3, pp. 280-287, July 2009.
• Hiroshi Ito, Hajime Suzuki, Kunihiko kazama, Takeshi Kikutani. Polymer Structure and properties in micro- and nanomolding process, Current Applied Physics, Elsevier, Vol. 9, pp. e19-e24, June 2009.
• Hideki Hayashi, Masayo Takizawa, Takayuki Arai, Keisuke Ikeda, Wataru Takarada, Takeshi Kikutani, Yasuhito Koyama, Toshikazu Takata. 9,9-Diarylfluorene-Based Poly(alkyl aryl ether)s: Synthesis and Property, Polym. J., Vol. 41, pp. 609-615, June 2009.
• Kyoung Hou Kim, Takayoshi Yamaguchi, Yutaka Ohkoshi, Yasuo Gotoh, Nagura Masanobu, Hiroshi Urakawa, Kotera Masaru, Takeshi Kikutani. Molecular weight dependence of fiber structure development in the laser drawing of Poly(ethylene terephthalate) Fibers, Journal of Polymer Science, Part B: Polymer Physics, vol. 47, no. 17, pp. 1653-1665, June 2009.
• 増田正人, 宝田亘, 鞠谷雄士. 溶融紡糸ポリエチレンテレフタレート繊維の力学特性に対するノズル径の影響, 繊維学会誌, 繊維学会, Vol. 64, No. 4, pp. 118-126, Apr. 2009.
• S.J. Lee, W.G. Hahm, T. Kikutani, B.C. Kim. Effects of clay and POSS nanoparticles on the quiescent and shear-induced crystallization behavior of high molecular weight polyethylene terephthalate, Polymer Engineering and Science, vol. 49, no. 2, pp. 317-323, Feb. 2009.
• 郡洋平, 宝田亘, 伊藤浩志, 武部智明, 南裕, 金井俊孝, 鞠谷雄士. ポリプロピレンの高速溶融紡糸における低立体規則性成分ブレンドの効果, 成形加工, プラスチック成型加工学会, Vol. 20, No. 11, pp. 831-839, Nov. 2008.
• Masatoshi Shioya, Tomomi Kawazoe, Ryota Okazaki, Takumi Suei, Shinichi Sakurai, Katsuhiro Yamamoto, Takeshi Kikutani. Small-Angle X-ray Scattering Study on the Tensile Fracture Process of Poly(ethylene terephthalate) Fiber, Macromolecules, ACS PUBLICATIONS, Volume 41, No. 13, pp. 4758-4765, July 2008.
• C. Prahsarn, A. matsubara, S. Motomura, T. Kikutani. Development of Bicomponent Spunbond Nonwoven Webs Consisting of Ultra-fine Splitted Fibers, International Polymer Processing, HANSER, Vol. 23, No. 2, pp. 178-182, May 2008.
• H.Ito, K.Kazama, T.Kikutani. Effects of Process Conditions on Surface Replication and Higher-Order Structure Formation in Micromolding, Macromol. Symp., Wiley Inter Science, Vol. 249-250, pp. 628-634, May 2008.
• D. Kawakami, C. Burger, S. Ran, C. Avila-Orta, I. Sics, B. Chu, S. M. Chiao, B. S. Hsiao, T. Kikutani. New insights into lamellar structure development and SAXSA/WAXD sequence appearance during uniaxial stretching of amorphous polyethylene terephthalate above glass transition temperature, Macromolecules, vol. 41, no. 8, p. 2859-2867, Apr. 2008.
• K.H.Jang, B. C. Kim, W. G. Hahm, T. Kikutani. High-speed Melt Spinning of Nanoparticle-filled High Molecular Weight Poly(ethylene terephthalate), International Polymer Processing, HANSER, Vol. 23, No. 4, pp. 370-376, Apr. 2008.
• TAKESHI KIKUTANI. Development of Bicomponent Spunbond Nonwoven Webs Consisting of Ultra-fine Splitted Fibers, International Polymer Processing, Hanser, Vol. 23, No. 2, pp. 178-182, Apr. 2008.
• K. H. Kim, H. H. Cho, H.Ito, T.Kikutani. Fiber Structure Development in High-Speed Melt Spinning of Poly(trimethylene terephthalate) (PTT) - On-line Measurement of Birefringence –, Journal of Polymer Science, Part B, Polym. Physics, Wiley Interscience, Vol. 46, No. 9, pp. 847-856, Mar. 2008.
• Hiroshi Ito, kunihiko kazama, TAKESHI KIKUTANI. Effects of Process Conditions on Surface Replication and Higher-order Structure formation in micromolding, Macromolecular Symposia, Vol. 249&250, pp. 628-634, May 2007.
• Daisuke Kawakami, Shaofeng Ran, Christian Burger, Carlos Avila-Orta, Igors Sics, Benjamin Chu, Benjamin S.Hsiao, Takeshi Kikutani. Superstructure evolution in poly(ethylene terephthalate) during uniaxial deformation above glass transition temperature, Macromolecules, vol. 39, no. 8, pp. 2909-2920, Apr. 2006.
• 山本清志, 片桐正博, 古田博一, 伊藤浩志, 鞠谷雄士. 回収ＰＥＴボトルを原料とする複合繊維における繊維構造形成と捲縮の発現, 成形加工, Vol. 18, No. 1, pp. 80-86, Jan. 2006.
• M.Shioya, T.Kawazoe, J.Kojima, S.Sakurai, K.Yamamoto, T.Kikutani. Small-angle X-ray scattering of long period structures forming bundles, Polymer, Vol. 47, pp. 3616-3628, 2006.
• X.Q.Shi, M.Takasaki, H.Ito, T.Kikutani. Structural Development and Properties of Melt Spun Poly(butylene succinate) and Poly(butylene terephthalate-co-succinate-co-adipate) Biodegradable Fibers, Intern. Polymer Processing, Vol. 21, pp. 64-69, 2006.
• Yutaka Kawahara, Masaki Kamo, Kiyoshi Yamamoto, Satoshi Ogawa, Douhiko Terada, Takeshi Kikutani, Masaki Tsuji. Oligomer Deposition on the Surface of PET Fiber in Supercritical Carbon Dioxide Fluid, Macromolecular Materials and Engineering, Vol. 291, pp. 11-15, 2006.
• W.-G. Hahm, H.Ito, T.Kikutani. Analysis of Necking Deformation Behavior in High-Speed In-Line Drawing Process of PET by On-Line Diameter and Velocity Measurements, Intern. Polym. Process., Vol. 21, No. 5, pp. 536-543, 2006.
• Taiyo Yoshioka, Masaki Tsuji, Yutaka Kawahara, Takeshi Kikutani, Shinzo Kohjiya. Internal fine structures in the high-speed-spun fibers of poly(ethylene 2,6-naphthalene dicarboxylate), Polymer, Vol. 46, pp. 1886-1892, 2005.
• Yoshiaki Hada, Haruo Shikuma, Hiroshi Ito, Takeshi Kikutani. High-Speed Melt Spinning of Syndiotactic-Polystyrene; Improvement of Spinnability and Fiber Structure Development Via Bicomponent Spinning with Atactic-Polystyrene, J. Macromol. Sci., Part-B Physics, Vol. 44, No. 4, pp. 549-571, 2005.
• J.Ishibashi, T.Kikutani. Experimental Study on Factors Influencing Throughput Rate and Process of Polymer-Mineral Filler Mixing in a Twin Screw Extruder, International Polymer Processing, Vol. 20, No. 4, pp. 388-397, 2005.
• Daisuke Kawakami, Benjamin S. Hsiao, Christian Burger, Shaofeng Ran, Carlos Avila-Orta, Igors Sics, Takeshi Kikutani, Karl I. Jacob, Benjamin Chu. Deformation-Induced Phase Transition and Superstructure Formation in Poly(ethylene terephthalate), MACROMOLECULES, Vol. 38, pp. 91-103, 2005.
• Hiroshi Ito, Yusuke Yagisawa, Takushi Saito, Toshiyuki Yasuhara, Takeshi Kikutani, Yoshitoshi Yagisawa. Fundamental Study on Structure Development of Thin-Wall Injection Molded Parts, Thoretical and Applied Mechanics Japan, Vol. 54, pp. 263-268, 2005.
• X.Q.Shi, H.Ito, T.Kikutani. Characterization on mixed-crystal structure and properties of poly(butylene adipate-co-terephthalate) biodegradable fibers, Polymer, Vol. 46, pp. 11442-11450, 2005.
• Junichi Kojima, Takeshi Kikutani. Control of High-order Structure of Poly(ethylene terephthalate) Fibers by Blending with Liquid Crystalline Polymer, Sen'i Gakkaishi, Vol. 61, No. 2, pp. 29-37, 2005.
• Yoshiaki Hada, Haruo Shikuma, Hiroshi Ito, Takeshi Kikutani. Structure and Properties of Syndiotactic Polystyrene Fibers Prepared in High-Speed Melt Spinning Process, Fibers and Polymers, Vol. 6, No. 1, pp. 19-27, 2005.
• X.Q.Shi, K.Aimi, H.Ito, S.Ando, T.Kikutani. Characterization on mixed-crystal structure of poly(butylene terephthalate/succinate/adipate) biodegradable copolymer fibers, Polymer, Vol. 46, pp. 751-760, 2005.
• Kazuhiro Nakata, Yutaka Ohkoshi, Yasuo Gotoh, Masanobu Nagura, Yoshitsugu Funatsu, Takeshi Kikutani. Mechanical Properties of Poly(ethylene terephthalate) Fiber Produced by Conjugate Melt Spinning with Polystyrene and CO2 Laser-Heated Drawing, Sen'i Gakkaishi, Vol. 60, No. 11, pp. 352-355, 2004.
• Daisuke Kawakami, Benjamin S. Hsiao, Shaofeng Ran, Christian Burger, Bruce Fu, Igors Sics, Benjamin Chu, Takeshi Kikutani. Structural Formation of Amorphous Poly(ethylene terephthalate) during Uniaxial Deformation above Glass Temperature, POLYMER, Vol. 45, pp. 905-918, 2004.
• Jun Young Kim, Seong Hun Kim, Takeshi Kikutani. Fiber Properties and Structure Development of Polyester Blend Fibers Reinforced with a Thermotropic Liquid-Crystalline Polymer, J. Polym. Sci., Pt-B:Polym. Physics, Vol. 42, pp. 395-403, 2004.
• 増田正人, 船津義嗣, 風間邦彦, 鞠谷雄士. 紡糸線上での炭酸ガスレーザー照射がポリエチレンテレフタレート繊維の力学特性に与える影響, 繊学誌, Vol. 60, No. 11, pp. 338-345, 2004.
• 千塚健史, 鞠谷雄士. 押出装置内におけるpoly(ethylene terephthalate)の分解挙動の解析, 繊学誌, Vol. 60, No. 11, pp. 331-337, 2004.
• 舩井栄志, 櫻井伸一, 原　滋郎, 山本勝宏, 岡本　茂, 小島潤一, 鞠谷雄士. 高速紡糸ポリエチレンテレフタレート繊維のシンクロトロンＸ線散乱法による精密構造解析, 繊学誌, Vol. 60, No. 11, pp. 322-330, 2004.
• 寺田堂彦, 河原豊, 鞠谷雄士, 岩本正治. 超臨界二酸化炭素処理によるポリエステル繊維の構造変化, 繊学誌, Vol. 60, No. 12, pp. 357-364, 2004.
• S. Umemoto, R. Hayashi, R. Kawano, T. Kikutani, N. Okui. Molecular Weight Dependence of Primary Nucleation Rate of Poly(Ethylene Succinate), Journal of Macromolecular Science Part B Physics, Vol. B42, No. 3, pp. 421-430, Mar. 2003.
• Kunihiko Kazama, Hiroshi Ito, Takeshi Kikutani. Fiber Structure Formation in Melt Spinnig Process with Modulation of Take-up Velocity, Polymer Processing Society, Europe/Africa Regional Meeting, pp. CD-R, 2003.
• Chen Xu, Hiroshi Ito, Takeshi Kikutani. Influence of Branching on the Structure and Properties of Poly(ethylene terephthalate) Fibers obtained by High-speed Melt Spinning, Polymer Processing Society 19th Annual Meeting, Melbourne, pp. CD-R, 2003.
• Takeshi Kikutani, Midori Takasaki, Motohiko Kuroda, Hiroshi Ito. Formation of Stereocomplex Crystals in Fiber Processing of Racemate Polylactide, Polymer Processing Society 19th Annual Meeting, Melbourne, pp. CD-R, 2003.
• Hiroshi Ito, Ken-ichi Suzuki, Takeshi Kikutani, Ho-Jong Kang. Experimental Analysis on Structure Formation in Tubular Film Blowing Process, Polymer Processing Society 19th Annual Meeting, Melbourne, pp. CD-R, 2003.
• TAKESHI KIKUTANI. On-line Measurement of Structure Development in Fiber Spinning and Film Blowing of Polypropylene, Polymer Crystallization and Structure Formation in Processing, Linz, pp. CD-R, 2003.
• Hiroshi Ito, Ken-ichi Suzuki, Takeshi Kikutani, Ho-Jong Kang, Toshitaka Kanai. On-line Measurement on Structure Formation in Film Blowing Process, Advanced Polymeric Materials Technology, Gyeongju, pp. CD-R, 2003.
• Takeshi Kikutani, Midori Takasaki, Motohiko Kuroda, Hiroshi Ito. Development of Fiber Structure with Highly Oriented Stereocomplex Crystals in High-speed Melt Spinning and Subsequent Annealing of Racemate Polylactides, Advanced Polymeric Materials Technology, Gyeongju, pp. CD-R, 2003.
• TAKESHI KIKUTANI. High-speed Melt Spinning of Bicomponent Fibers, Textile International Forum and Exhibition 2003, pp. B3-7-13, 2003.
• H.Ito, K.Suzuki, T.Kikutani, H.J.Kang. Online Analysis on Structure Formation in Film Blowing Process of Polypropylene, , Abstracts of International Conference on Materials for Advanced Technologies ICMAT 2003, Singapore, December 7-12, 2003.
• Jun Young Kim, Eun Su Seo, Seong Hun Kim, Takeshi Kikutani. Effect of Annealing on Structure and Properties of TLCP/PEN/PET Ternary Blend Fibers, Macromolecular Research, Vol. 11, No. 1, pp. 62-68, 2003.
• 熊沢金也, 高橋秀和, 田畑洋, 吉村三枝, 清水進, 鞠谷雄士. 交互積層構造を有する干渉発色繊維の色相の変化, 繊維学会誌, Vol. 59, No. 10, pp. 392-400, 2003.
• Sun Hee Lee, Kyoung Hou Kim, Takeshi Kikutani, Hyun Hok Cho. Fiber structure formation and physical properties of poly(butylene terephthalate) fibers in high-speed melt spinning, e-Polymers, Vol. 2003, No. 27, pp. 1-12, 2003.
• M.Takasaki, H.Ito, T.Kikutani. Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes, J. Macromol. Sci.-Phys., Vol. 42, No. 3 & 4, pp. 403-420, 2003.
• Midori Takasaki, Hiroshi Ito, Takeshi Kikutani. Structure Development of Polylactides with Various D-Lactide Contents in the High-Speed Melt Spinning Process, J. Macromol. Sci., Phys., Vol. B42, No. 1, pp. 59-75, 2003.
• T.Kitayama, S.Utsumi, H.Hamada, T.Nishino, T.Kikutani, H.Ito. Interfacial Properties of PP/PP Composites, J. Appl. Polym. Sci., Vol. 88, pp. 2875-2883, 2003.
• M.Takasaki, H.Ito, T.Kikutani. Development of Stereocomplex Crystal of Polylactides in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes, International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan, pp. 40-43, 2002.
• H.Ito, Y.Shimomura, T.Kikutani. Fiber Structure Formation in High-speed Melt Spinning of PP/PE Sheath-core Type Bicomponent Fibers, International Symposium on Polymer Crystallization, Jun 9-12, Mishima Japan, pp. 200-201, 2002.
• M.Takasaki, H.Ito, T.Kikutani. Fiber Structure Development in High-Speed Melt Spinning of Polylactides, Polymer Fibres 2002, July 10-12, manchester, UK, 2002.
• H.Ito, K.Suzuki, T.Kikutani, K.Nakayama. Drawing Behaviors and Its On-line Measurements for Polyester Films, Conference Proceedings of Polymer Processing Society 18th Annual Meeting, June 16-20, Guimaraes, Portugal, pp. 152, 2002.
• T.Kikutani, M.Takasaki, H.Ito. Fiber Structure Development of Polylactides in the High-speed Melt Spinning Process, Melt spinning of Polymers and Glass in Polymer Research, May 13-14, Dresden Germany, pp. 93-104, 2002.
• K.H.Kim, F.Shibuya, H.Ito, H.H.Cho, T.Kikutani. Fiber Structure Development in High-speed Melt Spinning of Poly(trimethylene terephthalate), Conference Proceedings of Polymer Processing Society 18th Annual Meeting, June 16-20, Guimaraes, Portugal, pp. 158, 2002.
• TAKESHI KIKUTANI. Development and Plan of Nano Technology of National Project in Japan, Textile International Forum and Exhibition 2002, pp. 61-70, 2002.
• H.Ito, O.H.Cho, T.Kikutani. Hot Drawing of PET Fiber Utilizing Multiple Reflection of CO_2 Laser Beam, Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan, pp. CD-ROM 200, 2002.
• H.Ito, T.Kikutani. Drawing Behaviors and Its On-line Birefringence Measurements for Polyester Films, 22nd Sino-Japanese Modern Engineering and Technology Symposium, 2002, pp. 36, 2002.
• Y.Hada, H.Ito, T.Kikutani. Fiber structure development in high-speed melt pinning of s-PS/a-PS bicomponent fibers, Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan, pp. CD-ROM 198, 2002.
• T.Kikutani, K.Fukutome, H.Ito. High-speed Melt Spinning of Poly(ethlene 2, 6-naphthalene dicarboxylate)/Amorphous Polymer Sheath-core fibers and Analysis of Physical Network Structure, Conference Proceedings of Polymer Processing Society 2002, November 4-8, Taipei, Taiwan, pp. CD-ROM 199, 2002.
• Yutaka kawahara, Taiyo Yoshioka, masaki Tsuji, Takeshi Kikutanim Kazuaki Sugiuram Satoshi Ogawa. Morphology of High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate) Fiber and Its Structural Chnages by the Treatment in Supercritical Carbon Dioxide Fluid, J. Macromo. Sci.-Phys., Vol. B41, No. 1, pp. 177-184, 2002.
• T.Yoshioka, M.Tsuji, Y.kawahara, S.Koujiya, T.Kikutani. Permagnetic Etching of Poly(ethylene terephthalate) Fibers, Sen'i Gakkaishi, Vol. 58, No. 7, pp. 268-272, 2002.
• 熊澤金也, 高橋秀和, 田畑洋, 吉村三枝, 清水進, 鞠谷雄士. 交互積層構造を有する干渉発色繊維の変角反射特性, 繊維学会誌, Vol. 58, No. 6, pp. 195-201, 2002.
• 北山威夫, 石倉健太郎, 濱田泰以, 鞠谷雄士, 伊藤浩志. PP/PP同種異形態複合材料の力学特性, 成形加工, Vol. 14, No. 10, pp. 663-670, 2002.
• 寺田堂彦, 河原豊, 岩本正治, 鞠谷雄士. 顕微レーザーラマン分光法によるＰＥＴ繊維の構造解析, 繊維学会誌, Vol. 58, No. 9, pp. 342-345, 2002.
• H.Ito, K.Suzuki, T.Kikutani, K.Nakayama. Flow Drawing Behaviors and Its On-line Birefringence Measurement for Polyester Films, Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa, pp. 74-75, 2001.
• K.Kazama, H.Ito, T.Kikutani. Fiber Structure Development in Melt Spinning Process with Periodic Modulation of Take-up Velocity, Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa, pp. 94-95, 2001.
• X.Shi, M.Takasaki, H.Ito, T.Kikutani. Fiber Structure Development in Melt Spinning of Poly(butylene succinate) Fibers, Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa, pp. 118-119, 2001.
• Y.Hada, H.Ito, T.Kikutani. Influence of the Presence of Neighboring Fibers on the Stress Distribution in the Vicinity of Embedded Fibers in Single-fiber Pull-out Test, Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa, pp. 156-157, 2001.
• H.Ito, K.Suzuki, T.Kikutani, K.Nakayama. On-line Measurement of Birefringence Development in Uniaxial and Biaxial Elongation of PEN, Proceedings of Polymer Processing Society 17th annual meeting, pp. (CD-ROM : 340), 2001.
• H.Ito, K.Suzuki, T.Kikutani, K.Nakayama. Analysis of Flow Behavior and Resultant Network Structure in Uniaxial and Biaxial Elongation of PEN, Proceedings of ANTEC 2001, pp. (CD-ROM : 729), 2001.
• T.Kitayama, K.Ishikura, H.Hamada, T.Kikutani, H.Ito. Mechanical Properties of PP/PP Composites, Proceedings of ANTEC 2001, pp. (CD-ROM :694), 2001.
• M.Takasaki, H.Ito, T.Kikutani. Structure Development of Polylactides with Various D-lactide Content in the High-speed Melt Spinning, Proceedings of Polymer Processing Society 17th annualmeeting, pp. (CD-ROM : 337), 2001.
• Y.Shimomura, H.Ito, T.Kikutani. Fiber Structure Development in High-speed Spinning of PP/PE Sheath-core Type Bicomponent Fibers, Abstracts of International Conference on Advanced Polymers and Processing 2001 Yonezawa, pp. 66-67, 2001.
• Y.Kawahara, T.Kikutani, K.Sugiura, S.Ogawa. Dyeing behaviour of poly(ethylene terephthalate) fibres in supercritical carbon dioxide, Color. Technol., Vol. 117, pp. 266-269, 2001.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. I. Structural Analysis of As-Spun Fibers, J. Appl. Polym. Sci., Vol. 80, pp. 1575-1581, 2001.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. II. On-Line Measurements of the Spin Line, Including Change in Cross-Sectional Shape, J. Appl. Polym. Sci., Vol. 80, pp. 1582-1588, 2001.
• Wataru Takarada, Hiroshi Ito, Takeshi Kikutani, Norimasa OKui. Studies on High-Speed Melt Spinning of Noncircular Cross-Section Fibers. III. Modeling of Melt Spinning Process Incorporating Change in Cross-Sectional Shape, J. Appl. Polym. Sci., Vol. 80, pp. 1589-1600, 2001.
• Yutaka Kawahara, Taiyo Yoshioka, Kazuaki Sugiura, Satoshi Ogawa, Takeshi Kikutani. Dyeing Behavior of High-Speed Spun Poly(ethylene terephthalate) Fibers in Supercritical Carbon Dioxide, J. Macromol. Sci.-Physics, Vol. B40, No. 2, pp. 189-197, 2001.
• 河原豊, 杉浦和明, 小川賢, 鞠谷雄士. 超臨界二酸化炭素処理したポリエチレンテレフタレート繊維の構造, 繊維学会誌, Vol. 57, No. 7, pp. 220-223, 2001.
• Y. Shiraishi, N.Narazaki, T.Kikutani. The Application of an Integral Type Constitutive Equation to Numerical Flow Analyses of Viscoelastic Fluid in Unsteady Flow, Polymer Eng. & Sci., Vol. 41, No. 10, pp. 1695-1704, 2001.
• 占部宏生, 伊藤浩志, 鞠谷雄士, 奥居徳昌. ポリプロピレンの高速溶融紡糸過程における分子配向形成のオンライン計測, 成形加工, Vol. 12, No. 11, pp. 729-735, Nov. 2000.
• Emil Giza, Hiroshi Ito, Takeshi Kikutani, Norimasa Okui. Structural Control of Polyamide 6/Clay Nanocomposite Fibers by In-line Drawing, Journal of Polymer Engineering, Vol. 20, No. 6, pp. 403-425, June 2000.
• Emil Giza, Hiroshi Ito, Takeshi Kikutani, Norimasa Okui. Fiber Structure Development in High-speed Melt Spinning of Polyamide 6/Clay Hybrid Nano-composite, J. Macromol. Sci., Phys., Vol. B39, No. 4, pp. 545-559, Apr. 2000.
• 大越豊, 朴彰景, 後藤康夫, 鳥海浩一郎, 鞠谷雄士. ポリエーテルエーテルケトンの溶融紡糸線上での冷却挙動, 繊維学会誌, Vol. 45, pp. 340-347, Jan. 2000.
• T.Kikutani. On-line measurement of orientation development in the high-speed melt spinning process, Polymer Processing Society 16th Annual Meeting, Shanghai, China, pp. IL-9-2, 2000.
• C.Xu, H.Ito, T.Kikutani, N.Okui, K.Srikulkit. Fiber structure development in high-speed melt spinning of cation dyeable copolyester, Polymer Processing Society 16th Annual Meeting, Shanghai, China, pp. P-9-8, 2000.
• Hiroshi Ito, Takahiro Suzuki, Takeshi Kikutani, Kazuo Nakayama. On-line Analysis of Stress and Birefringence Development in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate), ANTEC 2000 tech. paper,Orlando, USA, pp. 919, 2000.
• H.H.Cho, K.H.Kim, Y.A.Kang, H.Ito, T.Kikutani. Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-Speed Spinning I Polyethylene Sheath/Poly(ethylene terephthalate) Core Fibers, J.Appl.Polym.Sci., Vol. 77, pp. 2254-2266, 2000.
• H.H.Cho, K.H.Kim, H.Ito, T.Kikutani. Fine-Structure and Physical Properties of Polyethylene Fibers in High-Speed Spinning I Effect of Melt-Flow Rate in the High-Density Polyethylene, J.Appl.Polym.Sci., Vol. 77, pp. 1182-1194, 2000.
• H.H.Cho, K.H.Kim, H.Ito, T.Kikutani. Fine-Structure and Physical Properties of Polyethylene Fibers in High-Speed Spinning II Effect of Catalyst Systems in Linear Low-Density Polyethylene, J.Appl.Polym.Sci., Vol. 77, pp. 1195-1206, 2000.
• Y.Kawahara, T.Kikutani. Diffusion of Organometallic Compounds into High-Speed Spun Poly(ethylene terephthalate) Fibers in Supercritical Carbon Dioxide Fluid, J. Macromol. Sci., Phys., Vol. B39, pp. 561-567, 2000.
• Y.Kawahara, M.Ohara, M.Tsuji, T.Kikutani. Surface Morphology of High-Speed Spun Poly(ethylene terephthalate) Fibers, J. Text. Eng., Vol. 46, pp. 5-6, 2000.
• H.H.Cho, K.H.Kim, Y.A.Kang, H.Ito, T.Kikutani. Fine-Structure and Physical Properties of Polyethylene/Poly(ethylene terephthalate) Bicomponent Fibers in High-Speed Spinning II Poly(ethylene terephthalate) Sheath/ Polyethylene Core Fibers, J.Appl.Polym.Sci., Vol. 77, pp. 2267-2277, 2000.
• T. Kikutani, K.Nakao, Wataru Takarada, Hiroshi Ito. On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process, Polymer Engineering & Science, Vol. 39, No. 12, pp. 2349-2357, Dec. 1999.
• J. Radhakrishnan, Hiroshi Ito, T. Kikutani, Norimasa Okui. Enhancement of Fiber Structure Formation of a Liquid Crystalline Copolyester via Ultra High-Speed Bicomponent Spinning with Poly(ethylene terephthalate), Polymer Engineering & Science, Vol. 39, No. 1, pp. 89-98, Jan. 1999.
• Hiroshi Ito, Takahiro Suzuki, Takeshi Kikutani, Norimasa Okui, Kazuo Nakayama. Analysis of Flow Behavior and Resultant Network Structure in Simultaneous Biaxial Elongation of Poly(ethylene terephthalate)（共著）, Proceedings of the 15th Polymer Processing Society Annual Meeting, pp. Rheology, 28, 1999.
• T. Kikutani, E. Giza, H. Ito, N. Okui. Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite, Polymer Processing Society, Asia-Australia Regional Meeting, pp. 253-254, 1999.
• TAKESHI KIKUTANI. Orientation-crystallization in High-speed Spinning Process, Symposium on Polymer Crystallization, Morphology and Fiber Structure Development, Annual Meeting of the Society of Fiber Science and Technology, Japan, Sen'i Gakkai Symp., Vol. S-21-S-24, 1999.
• TAKESHI KIKUTANI. Molecular Orientation and Crystallization in Fiber Processing, Gordon Conference, CAE in Polymer Processing, Ventura, USA, 1999.
• Jeong Hung Joong, H.Ito, T.Kikutani. High-Speed Melt Spinning of polyamide 6/Poly(ethylene terephthalate) Bicomponent Fibers(共著）, Proceedings of the 15th Polymer Processing Society Annual Meeting, pp. Film and Fibre, 19, 1999.
• K.Miyata, H.Ito, T.Kikutani, N.Okui. Fiber structure Development in High-Speed Melt Spinning of Poly(ethylene terephthalate-co-2,6-naphthalene dicarboxylate), J.Polym. Eng., Vol. 19, pp. 395-418, 1999.
• T.Furuta, J.Radhakrishnan, H.Ito, T.Kikutani, N.Okui. Fabrication of Continuous Fiber-Reinforced Thermoplastic Composites with Structural Gradient from Sheath-Core Type Bicomponent Fibers, Composite Interfaces, Vol. 6, No. 5, pp. 451-466, 1999.
• Y.Kawahara, T.Kikutani, M.Tsuji. Structural Analysis for Commercial Poly(ethylene terephthalate) Fiber with Longitudinal Thichness Fluctuation, Sen'i Gakkaishi, Vol. 55, No. 7, pp. 91-95, 1999.
• T. Kikutani, K. Nakao, wataru takarada, Hiroshi Ito. On-line Measurement of Orientation Development in the High-Speed Melt Spinning Process, Polym. Eng. Sci., Vol. 39, No. 12, pp. 2349-2357, 1999.
• K.Miyata, H.Ito, T.Kikutani, N.Okui. Structural Change of High-Speed Spun Poly(ethylene 2,6-naphthalene dicarboxylate) Fibers with Annealing, , , 55, 542-551 (1999), Sen’i Gakkaishi, Vol. 55, pp. 542-551, 1999.
• Y.Kawahara, H.J.Jeon, T.Kikutani. Dyeing Behaviour of Poly(ethylene terephthalate) Fibres Spun by High-Speed Melt Spinning, JSDC, Vol. 115, pp. 355-356, 1999.
• Y.Kawahara, K.Sugiura, S.Ogawa, T.Kikutani. Dyeing Behavior of Poly(ethylene terephthalate) Fibers Spun by High-Speed Melt Spinning in Super-critical Carbon Dioxide, Sen’i Gakkaishi, Vol. 55, pp. 613-616, 1999.
• T.Furuta, J.Radhakrishnan, H.Ito, T.Kikutani, N.Okui. Fabrication of TLCP Reinforced Composites with Structural Gradient From Sheath-core Bicomponeut Fibers(共著), Proceedings of the 14th Polymer Processing Society Annual Meeting, pp. 780-781, 1998.
• K.Miyata, N.J.Terrill, A.J.Ryan, H.Ito, T.Kikutani, N.Okui. Development of Structure in High-speed Spun Poly(ethylene-2,6-naphthalene dicarboxylate)Fibers under Different Spinning Conditions(共著), Proceedings of the 14th Polymer Processing Society Annual Meeting, pp. 590-591, 1998.
• J.Radhakrishnan, H.ito, T.Kikutani, N.Okui. Control of Fiber Structure Development of Poly(ethylene terephthalate)by High-speed Coextrusion Fiber Spinning with Polystyrene(共著), Proceedings of the 14th Polymer Processing Society Annual Meeting, pp. 705-706, 1998.
• Hyungjoong JEON, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI, Miyoshi OKAMOTO. Effect of Metrallic Wire Inserted in Nozzle in High-speed Melt Spinning of Poly(ethylene terephthalate), Journal of Applied Polymer Science, Vol. 70, pp. 665-674, 1998.
• 村田章, 伊藤浩志, 鞠谷雄士, 奥居徳昌. Control of Fiber Structure Using a Liquid Isothermal Bath in High-Speed Melt Spinning of Poly(vinylidene Fluoride), Seikei-Kakou, Vol. 10, pp. 554-562, 1998.
• Yukiko FURUHASI, Hiroshi ITO, Takeshi KIKUTANI, Takashi YAMAMOTO, Mitsugu KIMIZU, Mukerrem CAKMAK. Structural Analysis of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibers Prepared by Drawing and Annealing Processes, Journal of Polymer Science: Part B: Polymer Physics, Vol. 36, pp. 2471-2482, 1998.
• K.Miyata, H.Ito, T.Kikutani, N. Okui. Effect of Liquid Isothermal Bath in High-Speed Melt Spinning of Poly(ethylene 2,6-naphthalane dicarboxylate)（, Sen'i Gakkaishi, Vol. 54, No. 12, pp. 661-671, 1998.
• Ken MIYATA, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI. Structural Change of High-speed Spun Poly(ethylene 2,6-naphthalene dicarboxylate)Fibers on Annealing(共著), Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997, pp. 1P10, 1997.
• Takeshi KIKUTANI, Tatsuhiko FURUTA, J. RADHAKRISHNAN, Hiroshi ITO, Norimasa OKUI. Fabrication of TLCP Reinforced Composites from Sheath-Core Bicomponent Fibers (共著）, Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia, pp. 196, 1997.
• J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI. Control of Fiber Strucutre Development of a Liquid Crystalline Polyester via High-Speed Coextrusion Fiber Spinning with Poly(ethylene terephthalate)（共著）, Proceedings of 6th SPSJ International Polymer Conference, pp. 273-274, 1997.
• J. RADHAKRISHNAN, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI. Ultra High-Speed Spinning of Sheath-Core Type Bicomponent Fibers of a Liquid Crystalline Polyester: Poly(ethylene terephthalate-co-hydroxybenzoic acid)(PET/60PHB) and Poly(ethylene terephthalate)(共著）, Proceedings of the 13th Polymer Processing Society Annual Meeting, pp. 7F, 1997.
• Hiroshi Ito, Takeshi Kikutani, Kazumi Tada, Kiyohito Koyama. Modelling and Numerical Simulation of Polymer Crystallization in Injection Molding Process(共著), Proceedings of the Polymer Processing Society Europe/Africa Regional Meeting 1997, pp. KN3-2, 1997.
• H.S.Kim, H.Ito, T.Kikutani, N.Okui. The Thermal Bonding Behaviour of Polyethylene/Poly(ethylene terephthalate)Bicompo-nent Fibres, Journal of Textile Insttitute, Vol. 88, No. 3, pp. 37-51, 1997.
• Hyungjoong JEON, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI. Effect of Extraordinary Large Diameter Nozzle in High-Speed Melt Spinning of Poly(ethylene terephthalate), Sen'i Gakkaishi, Vol. 53, No. 12, pp. 540-548, 1997.
• 古橋幸子, 伊藤浩志, 鞠谷雄士, 山本孝, 木水貢. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)繊維の昇温過程における構造変化（共著）, 繊維学会誌, Vol. 53, No. 9, pp. 356-364, 1997.
• 古田達彦, J. Radhakrishnan, 伊藤浩志, 鞠谷雄士, 奥居徳昌. 芯鞘型複合繊維を利用した連続繊維強化熱可塑性樹脂複合材料の試作（共著）, 成形加工, Vol. 9, pp. 920-926, 1997.
• K. Miyata, T.Kikutani, N.Okui. Fiber Structure Formation in Ultra-High-Speed Melt Spinning of Poly(ethylene 2,6-naphthalene dicarboxylate), Journal of Applied Polymer Science, Vol. 65, pp. 1415-1427, 1997.
• J. RADHAKRISHNAN, Takeshi KIKUTANI, Norimasa OKUI. High-speed Melt Spinning of Sheath-Core Type Bicomponent Fibers of Polyesters : High and Low Molecular Weight Poly(ethylene terephthalate)Systems, Textile Research Journal, Vol. 67, pp. 684-694, 1997.
• M.Shioya, E.Mikami, T.Kikutani. Analysis of Single-Fiber Pull-Out from Composites by Using Stress Birefringence, Composite Interface, Vol. 4, pp. 429-445, 1997.
• Han Seong KIM, Hyun Hok CHO, Hiroshi ITO, Takeshi KIKUTANI, Norimasa OKUI. Tensile Behavior of Poly(ethylene terephthalate)/Polyethylene Bicomponent Fibers Prepared by High-Speed Melt Spinning, Seikei-Kakou, Vol. 9, pp. 449-461, 1997.
• Takashi YAMAMOTO, M.itsugu KIMIZU, Takeshi KIKUTANI, Yukiko FURUHASHI, Mukerrem CAKMAK. The Effect of Drawing and Annealing Conditions on the Structure and Properties of Bacterial Poly(3-Hydroxybutyrate-co-3-hydroxyvalerate)Fibers, International Polymer Processing, Vol. XII, pp. 29-37, 1997.
• J.Radhakrishnan, T.Kikutani, N.Okui. Thinning Behavior of the Spinline in High-Speed Bicomponent Spinning of High Molecular Weight and Low Molecular Weight Poly(ethylene terephthalate), Sen'i Gakkaishi, Vol. 52, No. 11, pp. 618-622, 1996.
• T.Kikutani, J.Radhakrishnan, M.Sato, N.Okui, A.Takaku. High-Speed Melt Spinning of PET - Mechanism of Fiber Structure Formation Using a Liquid Isothermal Bath as Modifier, International Polymer Processing, Vol. X1, No. 1, pp. 42-49, 1996.
• T.Kikutani, E.Mikami. The Model Analysis of Tensile Stress Distribution in the Short-Fiber Embedded in Thermoplastic Composites, Composite Interfaces, Vol. 4, pp. 1-9, 1996.
• Takeshi KIKUTANI, J. RADHAKRISHNAN, Sadaaki ARIKAWA, Akira TAKAKU, Norimasa OKUI. High-speed Melt Spinning of Bicomponent Fibers : Mechanism of Fiber Structure Development in Poly(ethylene terephthalate)/Polypropylene System, Journal of Applied Polymer Science, Vol. 62, pp. 1913-1924, 1996.
• 河原豊, 塩谷正俊, 鞠谷雄士, 高久明. タンニン定着処理による絹糸の構造の変化, 繊維学会誌, Vol. 51, No. 1, pp. 1-8, Jan. 1995.
• TAKESHI KIKUTANI, Katsumi Morohoshi, Hee Yeoul Yoo, Susumu Umemoto, NORIMASA OKUI. Fiber Structure Development in High-Speed Melt Spinning of Copolyesters : Poly (Ethylene Terephthalute-CO-1, 4-Cyclohexylene Dimethylene Terephthalate), Polymer Engineering and Science, Vol. 35, No. 11, pp. 942, Jan. 1995.
• TAKESHI KIKUTANI, Sadaaki Arikawa, Akira Takaku, NORIMASA OKUI. Fiber Structure Formation in High-Speed Melt Spinning of Sheath-Core Type Bicomponent Fibers, Sen'i Gakkaishi, Vol. 51, No. 9, pp. 408, 1995.
• 河原豊, 塩谷正俊, 鞠谷雄士, 高久明. 小角Ｘ線散乱による絹糸の膨潤挙動の解析, 繊維学会誌, Vol. 50, No. 5, pp. 199-207, May 1994.
• TAKESHI KIKUTANI, Yutaka KAWAHARA, Naoki Ogawa, NORIMASA OKUI. Capturing of Real Image of Neck-Like Deformation from High-Speed Spinning Line(共著), Sen'i Gakkaishi, Vol. 50, No. 12, pp. 561, 1994.
• 大越豊, 近田淳雄, 鞠谷雄士, 清水二郎. ポリエーテルエーテルケトン(PEEK)の溶融紡糸-紡糸線上での冷却、細化、構造形成-, 繊維学会誌, Vol. 49, No. 5, pp. 211-219, May 1993.
• 鞠谷雄士, 若山恵一, 佐藤正史, 高久明. ポリフェニレンスルフィドの高速紡糸における繊維構造形成, 繊維学会誌, Vol. 48, No. 10, pp. 549-556, Oct. 1992.
• 篠谷賢一, 石井 浩, 塩谷正俊, 鞠谷雄士, 高久明. ポリオキサジアゾールを出発物質とする炭素繊維の製造, 繊維学会誌, Vol. 47, No. 5, pp. 234-240, May 1991.
• Kiyoshi Yamamoto, TAKESHI KIKUTANI, Akira Takaku. Heat Transfer during Heat-treatment of Carbon Fibers by Direct Currenting, Carbon, Vol. 1991, pp. 148, 1991.
• Hiroto Kobayashi, Eita Hayakawa, Takeshi Kikutani, Akira Takaku. Effect of Quenching and Annealing on fiber Pull-out from Crystalline Polymer Matrices(共著), Advanced Composite Materials, Vol. 1, pp. 2, 1991.
• KIyoshi Yamamoto, TAKESHI KIKUTANI, Akira Takaku. Heat-treatment of canbon Fibers by Direct Currenting, Carbon, Vol. 1991, pp. 146, 1991.
• TAKESHI KIKUTANI, H. Morinaga, A. Takaku, J. Shimizu. Effect of Spinline Quenching on Structure Development in High-speed Melt Spinning of Polylethylene terephthalate), International Polymer Processing, Vol. 5, No. 1, pp. 20-24, 1990.
• Y. Suetsugu, TAKESHI KIKUTANI, T. Kyu, J.L.White. An Experimental Technique for Characterizing Dispersion in Compounds of Particulates in Thermoplastics Using Small-angle Light Scattering, Colloid & Polymer Science, Vol. 268, pp. 118-131, 1990.
• Cao Jinan, TAKESHI KIKUTANI, Akira Takaku, Jiro Shimizu. Non-isothermal Orientation-induced Crystallizaion in Melt Spinning of Polypropylene, J. Appl. Polym. Sci., Vol. 37, pp. 2683-2697, 1989.
• 鞠谷雄士, 河原豊, 松井隆之, 高久明, 清水二郎. 高速紡糸過程中の糸温度測定と配向結晶化挙動の解析, 成形加工, Vol. 1, No. 3, pp. 333-339, 1989.
• TAKESHI KIKUTANI, Takayuki Matsui, Akira Takaku, Jiro Shimizu. Diameter Measurement in the Vicinity of Neck-like Deformation in High-speed Melt Spinning Process, Sen'i Gakkaishi, Vol. 45, No. 11, pp. 441-446, 1989.
• 山田裕憲, 鞠谷雄士, 高久明, 清水二郎. エチレンテレフタレート／エチレンイソフタレート共重合体の高速紡糸におけるネック状変形と繊維の構造形成との関係, 繊維学会誌, Vol. 44, No. 4, pp. 177-185, Apr. 1988.
• TAKESHI KIKUTANI, Hironori Yamada, Akira Takaku, Jiro Shimizu. Effect of Sodium Stearate as a Nucleating Additive in High-speed Melt Spinning of Polylethylene terephthalate), 繊維学会誌, Vol. 44, No. 7, pp. 317-324, 1988.
• 清水二郎, 鞠谷雄士, 大越豊, 高久明. ポリエーテル・エーテル・ケトン(PEEK)の溶融紡糸と繊維構造および物性, 繊維学会誌, Vol. 43, No. 10, pp. 507-519, Oct. 1987.
• 清水二郎, 鞠谷雄士, 大越豊, 高久明. ポリエーテル・エーテル・ケトン(PEEK)延伸熱処理繊維の結晶構造と屈折率, 繊維学会誌, Vol. 41, No. 11, pp. T-461-T-466, Nov. 1985.
• 清水二郎, 鞠谷雄士, 高久明, 奥居徳昌. ポリエチレンテレフタレートの高速紡糸過程における繊維構造の形成-配向中間相を考慮に入れた繊維構造解析-, 繊維学会誌, Vol. 40, No. 6, pp. T-177-T-184, June 1984.
• 清水二郎, 鞠谷雄士, 高久明, 奥居徳昌. ポリエチレンテレフタレートの高速紡糸過程における繊維構造の形成-結晶格子定数、高次構造の紡糸速度依存性-, 繊維学会誌, Vol. 40, No. 2, pp. T-63-T-70, Feb. 1984.
• 清水二郎, 奥居徳昌, 鞠谷雄士, 小野明宏, 高久明. ナイロン6の高速紡糸, 繊維学会誌, Vol. 37, No. 4, pp. T-143-T-152, Apr. 1981.
• 清水二郎, 奥居徳昌, 鞠谷雄士. ポリエチレンテレフタレートの高速紡糸-断面不均一構造-, 繊維学会誌, Vol. 37, No. 4, pp. T-135-T-142, Apr. 1981.
• 清水二郎, 奥居徳昌, 鞠谷雄士, 鳥海浩一郎. ポリエチレンテレフタレート繊維の高速紡糸-分子量の影響について-, 繊維学会誌, Vol. 34, No. 3, pp. T-93-T-98, Mar. 1978.

著書

• 宝田亘, 鞠谷雄士. 繊維・フィルム成形過程の“その場”複屈折測定, 繊維学会誌, Vol. 77, No. 1, p. P-32, Jan. 2021.
• 鞠谷雄士. 繊維の高性能化・高機能化からインテリジェント化時代を迎えてー１, 繊維のスマート化技術体系（監修 鞠谷雄士、平坂雅男）, NTS, pp. 3-7, Dec. 2017.
• 扇澤敏明, 柿本雅明, 鞠谷雄士, 塩谷正俊. トコトンやさしい高分子の本, トコトンやさしい高分子の本, 日刊工業新聞社, Mar. 2017.
• Takeshi Kikutani. Development of High-Strength Poly(ethylene terephthalate) Fibers: An Attempt from semiflexible Chain Polymer, High-Performance and specialty Fibers, Springer, pp. 133-147, Oct. 2016.
• Takeshi Kikutani. Progress in Fiber Spinning Technology, High-Performance and specialty Fibers, Springer, pp. 49-65, Oct. 2016.
• Takeshi Kikutani, Wataru Takarada. Structure Development in Uniaxial and Biaxial Film Stretching, Film Processing Advances (G.A. Campbell, T. Kanai eds.), Hanser, pp. 263-283, June 2014.
• 扇澤敏明, 柿本雅明, 鞠谷雄士, 塩谷正俊. 身近なモノから理解する高分子の科学, 身近なモノから理解する高分子の科学, 日刊工業新聞社, May 2014.
• M. Shioya, T. Kikutani. 7 Synthetic textile fibres: non-polymer fibres, Textiles and Fashion Materials, Design and Technology, Elsevier Ltd., pp. 139-154, 2014.
• 鞠谷雄士. 成形加工における結晶化の基礎, 高分子の結晶化制御 ―研究開発の最前線とその応用―, シーエムシー出版, pp. 207-219, July 2012.
• 鞠谷雄士. 高分子の結晶化制御 ―研究開発の最前線とその応用―, シーエムシー出版, July 2012.
• 柿本雅明, 扇澤敏明, 鞠谷雄士, 塩谷正俊. ここだけは押えておきたい高分子の基礎知識, ここだけは押えておきたい高分子の基礎知識, 日刊工業新聞社, Mar. 2012.
• S.J.Eichhorn, J.W.S.Hearle, M. Jaffe, T.Kikutani. Handbook of Textile Fibre Structure Volume 2: Natural, Regenerated, Inorganic and Sprcialist Fibres, Woodhead Publishing Limited, Nov. 2009.
• T.Kikutani. Structure Development in Synthetic Fiber Production, Handbook of Textile Fibre Structure Volume 1: Fundamentals and Manufactured Polymer Fibres, Woodhead Publishing Limited, Nov. 2009.
• S.J.Eichhorn, J.W.S.Hearle, M.jaffe, T.Kikutani. Handbook of Textile Fibre Structure Volume 1: Fundamentals and Manufactured Polymer Fibres, Woodhead Publishing Limited, Nov. 2009.
• 鞠谷雄士. 伸長プロセスにおける溶融構造制御, PLASTICS AGE ENCYCLOPEDIA 進歩編2009, プラスチックス・エージ, pp. 87-97, Oct. 2009.
• 仲原健介, 鞠谷雄士. 紡糸線制御によるPET繊維の高強度化, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 301-310, Nov. 2008.
• 濱野陽, 鞠谷雄士. PET繊維高強度化要因解析, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 311-321, Nov. 2008.
• 垰口信一, 鞠谷雄士. PETの高分子量化と劣化抑制押出, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 271-277, Nov. 2008.
• 山崎斉, 鞠谷雄士. PET繊維化に及ぼす添加剤の効果, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 278-283, Nov. 2008.
• 山崎斉, 三好利一, 鞠谷雄士. PET繊維化に及ぼす添加剤の効果, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 284-289, Nov. 2008.
• 高田悟史, 増田正人, 鞠谷雄士. レーザー照射溶融紡糸によるPET繊維の高強度化, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 290-300, Nov. 2008.
• 鞠谷雄士. 総論：高強度繊維開発, 精密高分子の基礎と実用化技術、中濱精一監修, シーエムシー出版, pp. 56-65, Nov. 2008.
• 鞠谷雄士. 成形プロセスにおけるオンライン複屈折計測法と計測事例, LCD/光学材料における偏光・複屈折の制御・測定と応用, 技術情報協会, pp. 91-105, Sept. 2008.
• 鞠谷雄士. 成形品のオフライン複屈折計測法と計測事例, LCD/光学材料における偏光・複屈折の制御・測定と応用, 技術情報協会, pp. 76-90, Sept. 2008.
• 鞠谷雄士, （山本良一監修）. エコマテリアルハンドブック, 丸善, pp. 205-207, Dec. 2006.
• 鞠谷雄士, （高分子学会編）. 基礎高分子科学, 東京化学同人, pp. 175-179, July 2006.
• 鞠谷雄士, 竹村憲ニ監修, （社）プラスチック成形加工学会編. 図解プラスチック成形材料, 工業調査会, May 2006.
• 鞠谷雄士, （社）プラスチック成形加工学会編. プラスチック成形品の高次構造解析入門, 日刊工業新聞社, pp. 1-33,49-105,127-141,173-185, Feb. 2006.
• 鞠谷雄士, （堀照夫監修）. Future Textiles －進化するテクニカル・テキスタイル－, 繊維社, pp. 7-12, Feb. 2006.
• 鞠谷雄士, 伊藤浩志. PPS-21レポート（２）射出成形・金型，モルフォロジー・構造形成のセッションを中心に, プラスチックス・エージ, Vol. 51, No. 10, pp. 188-198, 2005.
• 小島潤一, 櫻井伸一, 鞠谷雄士. 繊維ナノ構造制御-放射光による繊維構造解析 , 精密高分子技術, 監修 中浜精一, シーエムシー出版, 精密高分子技術, 監修 中浜精一, シーエムシー出版, pp. 350-361, 2004.
• 伊藤浩志, 鞠谷雄士. PPS-20レポート，繊維・フィルム，高分子成形加工における構造形成, プラスチックスエージ, プラスチックスエージ, No. 10, pp. 112-120, 2004.
• 鞠谷雄士. 繊維化技術の材料科学－繊維構造形成, 第３版繊維便覧，丸善, 第３版繊維便覧，丸善, pp. 23-27, 2004.
• 鞠谷雄士. 繊維化技術の基礎－概要, 第３版繊維便覧，丸善, 第３版繊維便覧，丸善, pp. 27-31, 2004.
• 鞠谷雄士. 流動場での結晶化を伴う高次構造形成, 高分子材料・技術総覧,第２編 高分子材料の性質の制御,産業技術サービスセンター, 宮田清蔵監修, 高分子材料・技術総覧,第２編 高分子材料の性質の制御,産業技術サービスセンター, 宮田清蔵監修, pp. 277-286, 2004.
• 鞠谷雄士. 繊維ナノ構造制御-総論, 精密高分子技術, 監修 中浜精一, シーエムシー出版　, 精密高分子技術, 監修 中浜精一, シーエムシー出版　, pp. 285-291, 2004.
• 鞠谷雄士. 紡糸・延伸, やさしい繊維の基礎知識, 繊維学会編, 日刊工業新聞社, やさしい繊維の基礎知識, 繊維学会編, 日刊工業新聞社, pp. 69-87, 2004.
• 船津義嗣, 鞠谷雄士. 繊維ナノ構造制御-溶融構造制御による高強度化 , 精密高分子技術, 監修 中浜精一, シーエムシー出版, 精密高分子技術, 監修 中浜精一, シーエムシー出版, pp. 292-305, 2004.
• 鞠谷雄士. 疾走するファイバー(Beyond Fibers), 繊維学会・日本科学未来館編, 監修 鞠谷雄士, 繊維学会・日本科学未来館編, 2004.
• 小島潤一, 櫻井伸一, 鞠谷雄士. 放射光による繊維構造解析, 機能材料, 機能材料, Vol. 23, No. 9, pp. 52-60, 2003.
• 船津義嗣, 鞠谷雄士. 溶融構造制御による高強度化, 機能材料, 機能材料, Vol. 23, No. 9, pp. 10-20, 2003.
• 鞠谷雄士. 高強度繊維開発の背景と研究計画, 機能材料, 機能材料, Vol. 23, No. 9, pp. 5-9, 2003.
• 鞠谷雄士. ナノ構造制御ファイバーの創製, 工業材料, 工業材料, Vol. 51, No. 9, pp. 25-28, 2003.
• 久保田和久, 矢崎文彦, 鞠谷雄士. 国際ポリマー成形加工学会年次大会「ＰＰＳ－１９」レポート, プラスチックスエージ, プラスチックスエージ, Vol. 49, No. 10, pp. 84-92, 2003.
• 鞠谷雄士. 紡糸・延伸, 繊維学会誌, 繊維学会誌, Vol. 59, No. 8, pp. P-252-P-258, 2003.
• 鞠谷雄士, 伊藤浩志. 複合繊維と高速溶融紡糸, 繊維機械学会誌, 繊維機械学会誌, Vol. 56, No. 5, pp. P236-P242, 2003.
• 本宮達也, 鞠谷雄士他編. 繊維の百科事典, 丸善, 丸善, 2002.
• 鞠谷雄士. 国際ポリマー成形加工学会年次大会「PPS-18」レポート(2), プラスチックスエージ, プラスチックスエージ, Vol. 48, No. 10, pp. 126-134, 2002.
• 伊藤浩志, 鞠谷雄士. 伸長プロセスにおけるオンライン分子配向計測, 成形加工, 成形加工, Vol. 14, No. 5, pp. 287-292, 2002.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（１２）－絡み合い構造解析－, 成形加工, 成形加工, Vol. 13, No. 3, pp. 167-171, 2001.
• 鞠谷雄士. PLASTICS AGE ENCYCLOPEDIA <進歩編> 2002, 成形加工における構造発現－伸長プロセス, プラスチックス・エージ, プラスチックス・エージ, pp. 173-183, 2001.
• 久保田和久, 矢崎文彦, 鞠谷雄士. 「ＰＰＳ－１７」年次大会レポート－プラスチック成形加工の潮流－, プラスチックス・エージ, プラスチックス・エージ, Vol. 47, No. 9, pp. 79-109, 2001.
• T.Kikutani. Polymer Fibers: Formation and Structure in Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd., Elsevier Science Ltd., pp. 7288-7296, 2001.
• T.Kikutani. Polymer Fiber Processing: Modeling : in Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd., Elsevier Science Ltd., pp. 7280-7284, 2001.
• 鞠谷雄士. 高強度繊維への挑戦－ポリエステル繊維の高強度化は可能か－, 高分子, 高分子, Vol. 50, No. 12, pp. 830-833, 2001.
• 鞠谷雄士. 平成１１年度インテリジェントファイバー先導調査研究報告書, 新エネルギー・産業技術総合開発機構, 新エネルギー・産業技術総合開発機構, pp. 61-70, 116-125, 149-155, 2000.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（２）－回折・散乱による構造解析の基礎―, 成形加工, 成形加工, Vol. 12, pp. 261-266, 2000.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（４）－複屈折と分子配向の基礎－, 成形加工, 成形加工, Vol. 12, pp. 427-431, 2000.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（５）－複屈折測定の応用―, 成形加工, 成形加工, Vol. 12, pp. 502-506, 2000.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（６）－広角Ｘ線回折による結晶配向解析－, 成形加工, 成形加工, Vol. 12, pp. 556-560, 2000.
• 鞠谷雄士, 伊藤浩志. プラスチック成形品の高次構造解析（７）－赤外吸収分光法，ラマン分光法，蛍光偏光法による分子配向解析―, 成形加工, 成形加工, Vol. 12, pp. 631-637, 2000.
• 鞠谷雄士, 伊藤浩志. 伸長プロセスの現状と課題, 成形加工, 成形加工, Vol. 12, pp. 695-700, 2000.
• 鞠谷雄士. 国際高分子加工学会PPS-16レポート－繊維・フィルム，構造形成を中心に－, プラスチックスエージ, プラスチックスエージ, Vol. 46, No. 10, pp. 116-120, 2000.
• 鞠谷雄士, 浅井茂雄, 伊藤浩志. プラスチック成形品の高次構造解析（９）－結晶化度の解析－, 成形加工, 成形加工, Vol. 12, pp. 775-780, 2000.
• 鞠谷雄士. 平成１０年度インテリジェントファイバー先導調査研究報告書, 新エネルギー・産業技術総合開発機構, 新エネルギー・産業技術総合開発機構, pp. 79-85, 1999.
• 鞠谷雄士. 高速紡糸と繊維構造制御, 高分子加工, 高分子加工, Vol. 48, No. 4, pp. 18-24, 1999.
• 鞠谷雄士. 成形加工におけるプラスチック材料(共著), シグマ出版, シグマ出版, 1998.
• TAKESHI KIKUTANI. High-Speed Melt Spinning of Bicomponent Fibers, Seikei-Kakou, Seikei-Kakou, Vol. 10, pp. 78-85, 1998.
• TAKESHI KIKUTANI. Fiber Formation Technology for Polymers-Accomplished Technology and Future Direction of Synthetic Fibers, Sen'i Gakkaishi, Sen'i Gakkaishi, Vol. 54, pp. P-37-42, 1998.
• 鞠谷雄士. 材料科学への招待(分担), 培風館, 培風館, 1997.
• 伊藤浩志, 鞠谷雄士. 結晶構造の評価技術(共著), 合成樹脂, 合成樹脂, Vol. 43, No. 7, pp. 21-27, 1997.
• 伊藤浩志, 鞠谷雄士. 成形品構造形成(共著), 成形加工, 成形加工, Vol. 9, No. 7, pp. 510-516, 1997.
• 鞠谷雄士. 高分子の構造(分担), 共立出版, 共立出版, pp. 481-507, 1997.
• 鞠谷雄士. 新繊維科学(編、分担), 通商産業調査会, 通商産業調査会, 1995.
• 鞠谷雄士. 高速溶融紡糸過程のシミュレーション, 繊維学会誌, 繊維学会誌, Vol. 50, No. 9, pp. 529, 1994.
• 鞠谷雄士. 溶融紡糸過程の計測技術, 成形加工, 成形加工, Vol. 5, No. 12, pp. 831, 1993.
• A.Ziabicki, H.Kawai eds., TAKESHI KIKUTANI. High-speed Fiber Spinning, John Wiley and Sons, John Wiley and Sons, pp. 173-201, 429-483, 1985.

国際会議発表 (査読有り)

• Go Dongwoo, Wataru Takarada, Arun Aneja, Takeshi Kikutani. In-Situ Observation of Multiple-Necking Behavior in Continuous Cold Drawing of PET Filaments in Ethanol, AIP Conference Proceedings, 2055, May 2019.  公式リンク  
  
• N. Roungpaisan, W. Takarada, T. Kikutani. High-speed Melt Spinning of Sheath/Core Bicomponent Fibers of Poly(L-lactide)s with Different Molecular Weight, AIP conference proceedings, 2065, 030030, pp. 1-4, Feb. 2019.
• Dong Woo Go, Wataru Takarada, Arun Aneja, Takeshi Kikutani. Structure-property relationship for poly(ethylene terephthalate) fibers prepared throughcontinuous drawing in ethanol, PPS-34, AIP conference proceedings, 2065, 020005, pp. 1-4, Feb. 2019.
• Sekiguchi, Y., wataru takarada, TAKESHI KIKUTANI. Structure and properties of melt-spun fibers of polyethylene blended with cellulose fibers, AIP Conference Proceedings, Vol. 1914, 2017.
• Go, D., wataru takarada, TAKESHI KIKUTANI. Differentiation of molecular chain entanglement structure through laser Raman spectrum measurement of High strength PET fibers under stress, IOP Conference Series: Materials Science and Engineering, Vol. 254, No. 3, 2017.
• Renukarn, R., wataru takarada, TAKESHI KIKUTANI. Melt-blowing conditions for preparing webs consisting of fine fibers, AIP Conference Proceedings, Vol. 1779, 2016.
• Kawai, K., Kohri, Y., wataru takarada, Takebe, T., Kanai, T., TAKESHI KIKUTANI. Mutual interaction between high and low stereo-regularity components for crystallization and melting behaviors of polypropylene blend fibers, AIP Conference Proceedings, Vol. 1713, 2016.
• Kenji SAWAI, wataru takarada, TAKESHI KIKUTANI, KUNIO TAKAHASHI, Shigeki SAITO. Electrostatic Chuck Consisting of Electrostatic Inductive Polymer Fibers for Handling of Curved Surface, MRS 2011 Fall Meeting, Abstracts, V17.41, Nov. 2011.
• T. Sakurai, W.Takarada, Y. Kohri, T. Takebe, Y. Minami, L.Rong, S. Toki, B.S.Hsiao, T. Kanai, T.Kikutani. Preparation of Elastomeric Fibers by Melt Spinning of Polypropylenes of Low Stereo-regularity, 5th Pacific Rim Conference on Rheology (PRCR-5), Proceedings of 5th Pacific Rim Conference on Rheology, CD-ROM, Aug. 2010.
• M. Shioya, S. Sakurai, K. Yamamoto, T. Kikutani. Fracture Toughness and Structure Changes During Tensile Deformation of PET Fibers, The 10th Asian Textile Conference, Proceedings of The 10th Asian Textile Conference, Sept. 2009.
• W. Takarada, T. Kikutani, T. Gries, C. Willner, S. Houis, S. Walter. Fiber Structure Development in Melt Spinning and Subsequent Drawing Process of Poly(vinilidene fluoride)/Polypropylene Bicomponent Fibers, Japanese-Sino Fiber Symposium 2009, Proceedings of Japanese-Sino Fiber Symposium 2009, Sept. 2009.
• TAKESHI KIKUTANI. Fiber Structure Development in High-Speed Melt Spinning of PP/Thermo-plastic PVA Bicomponent Fibers, 1st International Aachen-Dresden International Textile Conference, Aachen-Dresden International Textile Conference, CD-ROM, Aachen-Dresden International Textile Conference, Nov. 2007.
• Yasutaka Kato, Hiroshi Ito, Takeshi Kikutani. Fundamental Study on Fabrication of Graded Index Optical Fiber Utilizing Diffusion of Low Molar Mass Additive in Bicomponent Spinning Procfess, 36th Textile Research Symposium at Mt. Fuji, Proceedings of the 36th Textile Research Symposium at Mt.Fuji, Textile Machinery society of Japan, p. 1-6, Aug. 2007.
• wataru takarada, kunihiko kazama, Hiroshi Ito, T.Kikutani. High-speed Melt Spinning with Periodic Oscillation of Take-up Velocity, Proceedings of Polymer Processing Society 17th annualmeeting, pp. (CD-ROM : 339), 2001.
• wataru takarada, kunihiko kazama, Hiroshi Ito, T.Kikutani. High Speed Melt Spinning with Periodic Oscillation of Take-up Velocity, CAE in Polymer Processing, Gordon Conference, Ventula, USA, Vol. March, 2001.
• T.Kikutani, H.Urabe, wataru takarada, Hiroshi Ito. On-line measurement of orientation development in high-speed melt spinning of polypropylene, Polymer Fibres 2000, Manchester, UK, pp. 1, 2000.
• T.Kikutani, K.Nakao, wataru takarada, Hiroshi Ito. On-line Measurement of Orientation Development in High-Speed Melt Spinning of Poly(ethylene terephthalate), Proceedings of the 15th Polymer Processing Society Annual Meeting, pp. Film and Fibre, 18, 1999.
• Takeshi KIKUTANI, Wataru TAKARADA, Katsumi MOROHOSHI, Hiroshi ITO. High-Speed Melt Spinning of Non-Circular Cross-Section Fibers - Spinline Dynamics and Fiber Structure Formation -(共著）, Proceedings of the 4th International Union of Materials Research Societies International Conference in Asia, pp. 620, 1997.

国内会議発表 (査読有り)

• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化, 日本レオロジー学会 第２１回 高分子加工技術討論会, Oct. 2009.

国際会議発表 (査読なし・不明)

• Choi, Y.C., Nam, I.-W., Kim, D.-G., Jong, I., Takarada, W., TAKESHI KIKUTANI, Hahm, W.-G.. Analysis of PET fiber deformation in high-speed melt spinning by using 2-way on-line diameter measurements, Fiber Society 2017 Spring Conference: Next Generation Fibers for Smart Products, pp. 166, 2017.
• Khanum, R., Takarada, W., Aneja, A., TAKESHI KIKUTANI. Structure development of poly(ethylene terephthalate) undrawn filament upon cold drawing assisted with infusion of ethanol, Fiber Society 2016 Spring Conference: Textile Innovations - Opportunities and Challenges, 2016.
• Takeshi Kikutani. Application of High-Speed Melt Spinning Process for Enhancing Fiber Structure Formation of PHBH, The Fiber Society's Spring 2015 Conference, May 2015.
• Takeshi Kikutani. Multi-component Polymer Processing for Novel Applications, The 8th International Conference on Materials Science and Technology, Dec. 2014.
• R. Khanum, W. Takarada, A. Aneja, T. Kikutani. Solvent induced infusion behavior of poly(ethylene terephthalate) filaments during cold drawing, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Formation of beta-form crystals in high-speed melt spinning of biodegradable PHBH, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• K.Kawai, Y. Kohri, W. Takarada, T. Takebe, T. Kanai, T. Kikutani. Mutual interaction of two components in the crystallization of blend fibers consisting of polypropylenes of different stereo regularity, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• W. Takarada, R. Ruamsuk, Y. Zhang, T. Kikutani. Analysis on non-steady state spun-bonding process with short gap between spinneret and air sucker, Asian Workshop on Polymer Processing 2014, Abstracts of AWPP 2014, Asian Workshop on Polymer Processing, USB, Nov. 2014.
• Takeshi Kikutani. Development of All-Thermoplastic Fiber Reinforced Composites Utilizing Bicomponent Melt Spinning Process, The 20th China International Man-made Fiber Conference, Sept. 2014.
• Seiji Shibata, Wataru Takarada, Takeshi Kikutani. Analysis on crystallization behavior of oriented polymers utilizing differential scanning calorimetry of high heating rate, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Hideki Morioka, TAKESHI KIKUTANI, wataru takarada. Fiber structure development in high-speed melt spinning process of a new crystalline polycycloolefin, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Qing Qin, TAKESHI KIKUTANI, wataru takarada. Effect of processing conditions on crystallization behavior of PHBH in high-speed melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Kouya Kawai, Youhei Kohri, Wataru Takarada, Tomoaki Takebe, Toshitaka Kanai, Takeshi Kikutani. Mutual interaction of two components with different stereo regularity in crystallization of polypropylene blend fibers, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Keiichi Toyoda, Junichi Kojima, Tomoki Ishikawa, Takeshi Aoyagi, Wataru Takarada, Takeshi Kikutani. Multi-scale simulation for analysis of melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Renukarn Ruamsuk, TAKESHI KIKUTANI, wataru takarada. Effect of melt blowing die assembly on fiber formation behavior and web properties, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Ozlem Turkarslan, Sezen Gurdag, Emine Guven, Wataru Takarada, Takeshi Kikutani. Revisit polyester/liquid crystal blending and fiber spinning, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Toshiharu Iwasaki, TAKESHI KIKUTANI, wataru takarada. Optimization of heat sealing conditions for coextruded multilayer polyolefin film – Influence of sterilization treatment on seal property –, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Yuan Jing Zhang, Takeshi Kikutani, Wataru Takarada. Preparation of single-polymer composites from bicomponent fibers prepared by high-speed melt spinning process, International Symposium on Fiber Science and Technology (ISF2014), Abstracts of International Symposium on Fiber Science and Technology, The Society of Fiber Science and Technology, Japan, USB, Sept. 2014.
• Takeshi Kikutani. High-Speed Melt Spinning of Bio-Based Aliphatic Polyesters, IUPAC MACRO2014, July 2014.
• Satoshi Sugiura, Wataru Takarada, Takeshi Kikutani. Effect of polymer viscosities on the fiber structure and membrane properties of polypropylene / polyethylene bicomponent hollow fibers, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Qing Qin, Wataru Takarada, Takeshi Kikutani. Fiber structure formation in melt spinning of bio-based aliphatic copolyesters, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Yuki Takada, Wataru Takarada, Takeshi Kikutani. Stress-optical behavior of amorphous films during stretching and relaxation processes near glass transition, 30th International Conference of the Polymer Processing Society, Digital Book of Abstracts and Conference Papers of PPS-30, Polymer Processing Society, USB, June 2014.
• Motoki Amiya, Wataru Takarada, Takeshi Kikutani. Enhancement of Fiber Strength of Various Polyesters utilizing CO2 Laser Irradiation in Melt Spinning Process, AWPP2013, Dec. 2013.
• Yiwen Chen, Wataru Takarada, Takeshi Kikutani. On-line measurement and numerical simulation for melt-spinning process of bicomponent fibers with different cross-sectional configuration, Polymer Processing Society Asia/Australia Conference, Dec. 2013.
• Takeshi Kikutani. Film stretching behavior - fundamental analysis through in-situ measurements, Polymer Processing Society Asia/Australia Conference, Dec. 2013.
• TAKESHI KIKUTANI. Contribution of Flow-Induced Crystallization on Surface Roughness Development In Melt Spinning of Blend Fibers for Artificial Hair, AWPP2013, Dec. 2013.
• Yiwen Chen, Wataru Takarada, Takeshi Kikutani. Effect of Coss-sectional Cnfiguration on Fber Formation Behavior, The 12th Asian Textile Conference, Oct. 2013.
• Motoki Amiya, Masato Masuda, Wataru Takarada, Takeshi Kikutani. Development of High-strength Fibers of Various Polyesters, The 12th Asian Textile Conference, Oct. 2013.
• Takeshi Kikutani, Yuan Jing Zhang, Wataru Takarada. Utilization of Bicomponent Melt Spinning Process for Preparation of Fiber-Reinforced Composites, 12th IUMRS International Conference on Advanced Materials, Sept. 2013.
• Zhang Yuan Jing, Takarada Wataru, Kikutani Takeshi. Utilization of spunbonding process of bicomponent fibers for preparation of fiber reinforced composites, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Takeshi Kikutani. Effect of pre annealing on streching behavior of poly(ethylene naphthalate) films, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Okamoto kenya, takarada wataru, takebe tomoaki, minami yutaka, Youhei Kohri, kanai toshitataka, kikutani takeshi. Effect of cross-sectional configuration on fiber properties in bicomponent melt spinning of polypropylenes with different stereo regularity, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Xu Chen, Yamamoto Kiyoshi, Takarada Wataru, Kikutani Takeshi. Atmospheric pressure dyeability of poly(ethlene terephthalate) / poly(trimethylene terephthalate) blend fiber, 29th Internatnional Conference of the Polyemr Processing Society, Proceedings of the 29th Internatnional Conference of the Polyemr Processing Society, USB, July 2013.
• Takeshi Kikutani. Crystallization of Polymers of Low Crystallizability in Polymer Processing, International Discussion Meeting on Polymer Crystallization, June 2013.
• Takeshi Kikutani. Analysis on Fiber Formation Behavior in the Production of Non-woven Fabrics, The International Textile Conference 2013, Apr. 2013.
• Wataru Takarada, Noppadon kerddonfag, Wanee Chinsirikul, Takeshi Kikutani. Effect of D-lactide content on structure development behavior of polylactic acid films during uniaxial and sequential biaxial streching, Polymer Processing Society 28th Annual Meeting, Proceeding of The 28th International Conference of Polymer Processing Society, USB, Dec. 2012.
• Takeshi Kikutani. Effect of Structure Development on Processing Behavior in Fiber and Film Processing, Polymer Processing Society 28th Annual Meeting, Dec. 2012.
• Ruamsuk Renukarn, Takarada Wataru, Kikutani Takeshi. Effect of spinning conditions on fiber formation behavior in melt blowing process, Polymer Processing Society 28th Annual Meeting, Proceeding of The 28th International Conference of Polymer Processing Society, USB, Dec. 2012.
• 網谷基氣, 宝田亘, 鞠谷雄士. 溶融紡糸過程における炭酸ガスレーザー照射による各種ポリエステル繊維の高強度化, 第２０回プラスチック成形加工学会秋季大会, 成形加工シンポジア’１２, 一般社団法人 プラスチック成形加工学会, pp. 95-96, Nov. 2012.
• Takeshi Kikutani. Preparation of Fibers with Optical Functionality utilizing Bicomponent Melt Spinning Process, 41st Textile Research Symposium, Sept. 2012.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Effect of blending of low isotacticity component on properties of isotactic polypropylene fibers prepared by high-speed melt spinning process, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 196-199, Aug. 2012.
• Kenya Okamoto, wataru takarada, TAKESHI KIKUTANI, tomoaki takebe, yutaka minami, youhei kohri, toshitaka kanai. Effect of cross-sectional configuration on fiber formation behavior in bicomponent spinning of polypropoylene with different stereo regularity, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 200-203, Aug. 2012.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Preparation of fiber reinforced composites utilizing spunbonding process of shath-core bicomponent fibers consisting of various polymer combinations, Asian Workshop of Polymer Processing 2012, Proceedings of AWPP 2012, pp. 204-207, Aug. 2012.
• Takeshi Kikutani. Elastomeric Fibers –Processing-Structure-Property Relationship–, Polymer Processing Society Americas Conference 2012, Abstructs of PPS Americas Conference 2012, pp. 39, May 2012.
• H. Menju, W. Takarada, Takeshi Kikutani. Analysis on stress-optical behavior of carbondioxide based aliphatic polycarbonates, Polymer Processing Society Americas Conference 2012, Abstructs of PPS Americas Conference 2012, pp. 103-104, May 2012.
• Takeshi Kikutani. Modification of Melt Spinning Process for the Preparation of High-Performance Fibers, The Polymer Processing Society Asia/Australia Regional Meeting 2011, Proceedings of PPS2011, Nov. 2011.
• Yoshiki Fujii, Wataru Takarada, Yuji Ogino, Ryokei Endo, Takeshi Kikutani. Structure and Properties of the Fibers of Thermoplastic Liquid Crystalline Polymer Prepared by Sheath-core Bicomponent Spinning, Asian Textile Conference - 11, Proceedings of the 11th Asian Textile Conference, pp. 114, Nov. 2011.
• Takeshi Kikutani. Challenges in the Fiber Processing in the Next Decade, Asian Textile Conference - 11, Proceedings of the 11th Asian Textile Conference, CD-ROM, Nov. 2011.
• Takahiro Sakurai, Wataru Takarada, Takeshi Kikutani, Tomoaki Takebe, Youhei Kohri, Toshitaka Kanai, Lixia Rong, Shigeyuki Toki, Benjamin S. Hsiao. Effect of the Blending of High-tacticity Component on the Structure and Properties of Elastomeric Fibers of Low-tacticity Polypropylene, International Symposium on New Frontiers in Fiber Materials Science, Proceedings of International Symposium on New Frontiers in Fiber Materials Science, The fiber society, Oct. 2011.  公式リンク  
  
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blend Fibers for Artificial Hair, International Symposium on New Frontiers in Fiber Materials Science, Proceedings of International Symposium on New Frontiers in Fiber Materials Science, The fiber society, CD-ROM, Oct. 2011.  公式リンク  
  
• Xiaoshi Xu, Yutaka Shirakashi, Jyunya Ishibashi, Wataru Takarada, Takeshi Kikutani. Mechanism of Surface Roughness Development in Melt Spinning of Blends Fibers for Artificial Hair, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 124-125, Sept. 2011.
• Youhei Kohri, Tomoaki Takebe, Yutaka Minami, Toshitaka Kanai, Wataru Takarada, Takeshi Kikutani. Elastic Recovery of Low-isotacticity Polypropylene Bicomponent Fibers, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 194-195, Sept. 2011.
• H. Menju, W. Takarada, T. Kikutani. Stress versus Birefringence Behavior during Uniaxial Stretching and Relaxation Processes of Cyclo-olefin Copolymer Films, Asian Joint Conference on Advanced Polymer Processing, Proceedings of Asian Joint Conference on Advanced Polymer Processing, pp. 2-5, Sept. 2011.
• T. Sakurai, W. Takarada, T. Kikutani, T. Takebe, Y. Minami, Y. Kohri, T. Kanai, L. Rong, S. Toki, B. S. Hsiao. Analysis on the structural variation during the stretching and recovery of Elastomeric Fibers prepared from Polypropylenes of Low Stereo-regularity, The Polymer Processing Society 27th Annual Meeting, Proceedings of Polymer Processing Society 27th Annual Meeting, Polymer Processing Society, May 2011.
• H. Menju, W. Takarada, T. Kikutani. Effects of Temperature and Strain Rate on Stress versus Birefringence Behaviors during Uniaxial Stretching of Cyclo-olefin Copolymer Films, The Polymer Processing Society 27th Annual Meeting, Proceedings of Polymer Processing Society 27th Annual Meeting, Polymer Processing Society, May 2011.
• Takeshi Kikutani. Challenges in the Polymer Processing in the Next Decade, Launch Ceremony of Polymer Processing Academy, Mar. 2011.
• Takeshi Kikutani. Development of High-strength Polyester Fibers, Egypt-Japan Seminar, Dec. 2010.
• Takeshi Kikutani. Development of High-strength Polyester Fibers via Modification of Melt Spinning Process, Asian Workshop on Polymer Processing, AWPP2010, Dec. 2010.
• W. Takarada, J. L. Li, K. Kazama, X. M. Xie, T. Kikutani. Stability of the melt spinning process of Poly (ethylene terephthalate) with CO2 laser irradiation, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• T. Kikutani, Y. Fujii, W. Takarada, Y. Ogino, R. Endo. Structure and properties of the fibers of thermoplastic liquid crystalline polymer prepared by sheath-core bicomponent spinning, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• Y. Shirakashi, O. Asakura, S. Ito, J. Ishibashi, X. Xu, W. Takarada, T. Kikutani. Spinning Conditions on Surface Roughness and Reflective Properties of PA/PET Blend Fibers for Artificial Hair, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• Takeshi Kikutani. Utiliazation of Bicomponent Melt Spinning Process for the Preparation of Fibers with Optical Functionality, 1st Polymer Conference of Thailand, Oct. 2010.
• X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of surface roughness development in melt spinning of blend fibers, PPS 2010 Istanbul Regional Meeting, Proceedings of PPS 2010 Istanbul Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2010.
• N. Kerddonfag, W. Chinsirikul, O. Saravari, W. Takarada, T. Kikutani. Sequential and Simultaneous Biaxial Stretching of Polypropylene Films Containing -form crystalline Structure, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• Tomonori Furuyama, Wataru Takarada, TAKESHI KIKUTANI. Utilization of High-Speed Melt Spun Bicomponent Fibers for the Preparation of Reflective Polarizing Film, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• Ikeda Keisuke, Hiroto Menju, Takarada Wataru, Kikutani Takeshi. On-line measurement of birefringence development during stretching of cyclo olefin copolymer films, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• TAKESHI KIKUTANI. Structure Development in Polymer Processing, Polymer Processing Society 26th Annual Meeting, Proceedings of Polymer Processing Society 26th Annual Meeting, Polymer Processing Society, CD-ROM, July 2010.
• TAKESHI KIKUTANI. Inter-disciplinary Research Activities at Tokyo Tech on Development of New-Type Fibers via Melt spinning Process, 2010 International Forum for Advanced Textiles, June 2010.
• X. S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• Tomonori furuyama, Wataru Takarada, Takeshi Kikutani. Utilization of Melt Spinning Process for the Preparation of Fibers with Optical Functionality, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• Keisuke Ikeda, Wataru Takarada, Takeshi Kikutani. Effect of Drawing History on Birefringence Development during Sequential Biaxial Stretching of Cyclo Olefin Copolymer Film, Advanced Polymeric Materials and Technology Symposium (APMT2010), Proceedings of APMT 2010, Jan. 2010.
• TAKESHI KIKUTANI. Fiber formatioin, structure and properties of a new type of polyether-ester elastomeric fibers, 2009 International Conference on Advanced Fibers and Polymer Materials, Oct. 2009.
• TAKESHI KIKUTANI. Preparation of Various Types of Polypropylene Fibers via Control of Stereo Regularity Distribution, 2009 Forum on Advanced Textile Materials and Processing, Oct. 2009.
• K. Ikeda, W. Takarada, T. Kikutani. On-line Measurement of Birefringence Development during Sequential Biaxial Stretching of cyclo Olefin Copolymer Films, Polymer Processing Society Europe / Africa Regional Meeting, Proceedings of Polymer Processing Society 25th Regional Meeting, Polymer Processing Society, CD-ROM, Oct. 2009.
• TAKESHI KIKUTANI. Achievement of Project on the Development of High-Strength Poly(ethylene terephthalare) Fibers, The 10th Asian Textile Conference, Proceedings of the 10th Asian Textile Conference, CD-ROM, Sept. 2009.
• R. Aoki, S. Nakai, W. Takarada, T. Kikutani. Measurement of Birefringence Variation during Sequential Biaxial Stretching of PET Film, The 10th Asian Textile Conference, Proceedings of the 10th Asian Textile Conference, CD-ROM, Sept. 2009.
• X. S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Analysis on the Development of Surface Roughness in Melt Spinning of Fibers for Artificial Hair, The 10th Asian Textile Conference, Proceedings of the 10th Asian Textile Conference, CD-ROM, Sept. 2009.
• TAKESHI KIKUTANI. Fiber Formation in Melt Spinning of Elastomeric Polymers, Polymer Processing Society 25th Annual Meeting, Proceedings of Polymer Processing Society 25th Annual Meeting, Polymer Processing Society, CD-ROM, Mar. 2009.
• Q. Yuan, W. Takarada, H. Ito, T. Kikutani. Effect of Laser-Irradiation Heating in Melt Spinning Process of Polyoxymethylene on Structure and Properties of Resultant Fibers, Polymer Processing Society American Regional Meeting, Oct. 2008.
• Y. Kohri, W. Takarada, H. Ito, T. Kikutani, T. Takebe, H. Minami, T. Kanai. Effect of the Blending of Low Stereoregularity Component on Spinnability and Fiber Property Development in High-speed Melt Spinning of Polypropylene, Polymer Processing Society American Regional Meeting, Oct. 2008.
• M. Kitayama, W. Takarada, T. T.Kikutani. Morphological and Mechanical Characteristics of Melt-spun Poly(ether ester) Thermoplastic Elastomer Fibers at Room and Low Temperatures, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 177-178, Aug. 2008.
• R. Aoki, S.Yang, S.Nakai, W. Takarada, T.Kikutani. Effect of Drawing History on Higher-structure Development in Sequential Biaxial Stretching of PET Film, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 179-180, Aug. 2008.
• X. Shi, Y. Kohri, M. Kitayama, W. Takarada, H. Ito, T. T.Kikutani. Melt Spinning of Elastomeric Fibers, Asian Workshop on Polymer Processing, Book of Extended Abstracts, Asian Workshop on Polymer Processing, pp. 21-22, Aug. 2008.
• M.Kitayama, W.Takarada, H.Ito, T.Kikutani. Fiber Structure Development in Melt Spinning of Polyether-ester Elastomer, Polymer Fibres 2008, July 2008.
• Qi Yuan, Wataru Takarada, Hiroshi Ito, Takeshi Kikutani. Effect of Laser-irradiation Heating in Melt Spinning Process of Polyoxymethylene, Polymer Fibers 2008, July 2008.
• TAKESHI KIKUTANI. Development of High-strength Polyester Fibers, IUPAC Macro2008, July 2008.
• M.Kitayama, W.Takarada, H.Ito, T.Kikutani. Mechanism of Fiber Formation in Melt Spinning of Polyester ether Elastomer, Polymer Processing Society 24th Annual Meeting, June 2008.
• H.Ito, H. Suzuki, K. Kazama, T.Kikutani. Structure Development and Replication Properties of Micromolded Plastics Parts in Injection Compression Molding, Polymer Processing Society 24th Annual Meeting, June 2008.
• TAKESHI KIKUTANI. Fundamental Study on Fabrication of GI-Optical Fibers Utlizing Diffusion of Low Molar Mass Additive in Melt Spinning Process, International Conference on Advanced Fibers and Polymeric Materials, Oct. 2007.
• Tomoyuki Enya, Hiroshi Ito, TAKESHI KIKUTANI. Melt spinning of poly(ethylene terephthalate) using water-quenching bath placed at extremely short air-gap length, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society, Oct. 2007.
• kensuke nakahara, TAKESHI KIKUTANI. Development of high-strength PET fibers using spin-line drawing system, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society, Oct. 2007.
• Akira Hamano, TAKESHI KIKUTANI. Variation of drawability with storing time for melt-spun poly(ethylene terephthalate) fibers, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society Fall Annual Meeting and Technical Conference, The Fiber Society, Oct. 2007.
• 鞠谷雄士. Fundamental Study on Fabrication of GI-Optical Fibers Utilizing Diffusion of Low Molar Mass Additives in Melt Spinning Process, International Conference on Advanced Fibers and Polymer Materials, Oct. 2007.
• 塩谷 朋之, 伊藤 浩志, 鞠谷 雄士. Water-quenching Melt Spinning of Poly(ethylene terephthalate) with Extraordinary Short Air Gap, Oct. 2007.
• M.Kitayama, H.Ito, T.Kikutani. Crystallization of Polyester Elastomer under Tensile Stress, International Symposium on Polymer Crystallization, Sept. 2007.
• H.Ito, T.Kikutani. Fiber Structure Development in Melt Spinning of Thermoplastic Poly(vinyl alcohol), Polymer Processing Society Asia/Australia Meeting,, July 2007.
• TAKESHI KIKUTANI. Analysis of fiber formation behavior during high-speed in-line drawing process of poly(ethylene terephthalate), The 9th Asian Textile Conference, The 9th Asian Textile Conference, FAPTA (Federation of Asian Professional Textile Associations), June 2007.
• TAKESHI KIKUTANI. Control of higher-order structure of fibers through modification of melt spinning process, The Polymer Processing Society 23rd Annual Meeting, The Polymer Processing Society 23rd Annual Meeting, The Polymer Processing Society, Vol. CD-R, May 2007.
• Hiroshi Ito, kunihiko kazama, TAKESHI KIKUTANI. Surface properties and internal structure of micro/nano molded plastics for application to optical deveices, The Polymer Processing Society 23rd Annual Meeting, The Polymer Processing Society 23rd Annual Meeting, The Polymer Processing Society, Vol. CD-R, May 2007.
• K.Yamamoto, M.Katagiri, H.Ito, T.Kikutani. Fiber Structure Development in Bicomponent Fibers of Recycled PET Modified with a Chain Extender, The 2006 Sino- Japanese Fiber Symposium, The 2006 Sino- Japanese Fiber Symposium, pp. 217, Oct. 2006.
• K.Nakata, Y.Ohkoshi, Y.Gotoh, M.Nagura, M.Masuda, T.Kikutani. Mechanical Properties of Conjugated-Spun and Laser-Drawn Poly(ethylene terephthalate) Fiber, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, July 2006.
• Y.Kawahara, D.Terada, T.Yoshioka, M.Tsuji, T.Kikutani. Structural Modification of Polyester Fiber in Supercritical Carbon Dioxide Fluid, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, July 2006.
• W.G.Hahm, H.Ito, M.Shioya, T.Kikutani. Short-period fluctuation of the characteristics of poly(ethylene terephthalate) fibers revealed through the on-line measurement of the in-line drawing process and the mechanical testing of fibers, Polymer Fibres 2006, Polymer Fibres 2006, Vol. CD-ROM, July 2006.
• T.Enya, H.Ito, T.Kikuitani. Effect of Extremely Short Air-Gap Length on the Stabilization of Draw Resonance Behavior in Water-quenching Melt Spinning of Poly(ethylene terepthalate), Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, 2006.
• X.Q.Shi, H.Ito, T.Kikutani. Fiber structure development in single- and bi-component spinning of biodegradable aliphatic-aromatic copolyesters, International Fiber Conference 2006, International Fiber Conference 2006, Vol. CD-ROM, 2006.
• Y.Kato, H.Ito, T.Kikuitani. Diffusion of Low Molar Mass Additive During Bicomponent Melt Spinning Process for Continuous Fabrication of Graded-Index Plastic Optical Fibers, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, 2006.
• W.G.Hahm, H.Ito, T.Kikuitani. Structure Evolution and Property of Poly(ethylene terephthalate) Filaments Prepared via High-Speed In-line Drawing, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, 2006.
• S.Yang, T.Kikuitani, G.Li. Computer Simulation of Phase-inversed Morphology Formed in Polyaniline/Polyacrylonitrile Blend Films, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, 2006.
• H.Ito, K.Kazama, T.Saito, T/Yasuhara, T.Kikutani, T.Takaoka, S.Kawai. Surface Replication Property and Higher-Order Structure Development of Molded Parts with Ultrastructural Patterns Prepared by Micro/Nanomolding, Asian Workshop on Polymer Processing, The Japan Society of Polymer Processing, pp. 115-118, 2006.
• K.Kazama, H.Ito, T.Kikutani. Thermal Properties and Structure of Injection Molded Thin-wall Products of Polypropylene/Boron Nitride Composites, Asian Workshop on Polymer Processing, The Japan Society of Polymer Processing, pp. 102-105, 2006.
• S.Taoguchi, A.Hamano, T.Kikutani. Degradatio Behavior of Poly(ethylene terephthalate) during Melt-extrusion Process, Asian Workshop on Polymer Processing, The Japan Society of Polymer Processing, pp. 191-192, 2006.
• C.Prahsarn, A.Matsubara, S.Motomura, T.Kikutani. Development of High Functional Bicomponent Spunbond, Asian Workshop on Polymer Processing, The Japan Society of Polymr Processing, pp. 67-70, 2006.
• T.Kikutani. Effects of Polymer Designing on Fiber Structure Development Behavior in Single- and Bi-component Spinning of Polypropylene, Asian Workshop on Polymer Processing, The Japan Society of Polymer Processing, pp. 3-6, 2006.
• K.Nakahara, T.Kikutani. Development of high-strength PET fibres using liquid isothermal bath, Polymer Fibres 2006, Polymer Fibers 2006, Vol. CD-ROM, 2006.
• T.Kikutani, A.Hamano, M.Masuda, K.Nakahara, S.Taoguchi, H.Yamazaki. Development of High-strength Poly(ethylene terephthalate) Fibers via Control of Melt Structure, Polymer Processing Society 22nd Annual Meeting, Polymer Processing Society 22nd Annual Meeting, Vol. CD-ROM, 2006.
• Y.Yagisawa, H.Ito, T.Kikutani. Simultaneous measurements of stress and birefringence development during extensional deformation of cyclic olefin copolymer, IUPAC International Symposium on Advanced Polymer for Emerging Technologies, IUPAC International Symposium on Advanced Polymer for Emergin Technologies, Vol. CD-ROM, 2006.
• H.Yamazaki, T.Kikutani. Structural and Mechanical Behaviors of Poly(ethylene terephthalate) Fibers Modified by Blending Nucleating Agent, PPS2005 - America's Regional Meeting, PPS2005 - America's Regional Meeting, pp. 94, 2005.
• H.Ito, Y.Yagisawa, T.Saito, T.Yasuhara, T.Kikutani, Y.Yamagiwa. Fundamental study on Structure Development of Thin-Wall Injection Molded Parts, 54th Japan National Congress for Theoretical and Applied Mechanics, Vol. 54, pp. 263-268, 2005.
• Masato Masuda, Yoshitsugu Funatsu, Kunihiko Kazama, Hiroshi Ito, Takeshi Kikutani. Poly(ethylene terephthalate) Fibers Prepared in Melt Spinning Process with CO₂ Laser-Irradiation Heating, Proceedings of International Conference on Emerging Trends in Polymer & Textiles, Emerging Trends in Polymers & Textiles, Indian Institute of Technology, pp. 1-5, 2005.
• X.Q.Shi, H.Ito, T.Kikutani. Structure Development and Properties of High-Speed Melt Spun Poly(butylene terephthalate)/Poly(butylene adipate/terephthalate) Bicomponent Fibers, Polymer Processing Society 21st Annual Meeting, Polymer Processing Society 21st Annual Meeting, pp. 119, 2005.
• N.Okumura, T.Tajima, H.Ito, T.Kanai, T.Kikutani. Structure Development and Characteristics of Fibers Prepared in High Speed Melt Spinning and Drawing Processes of Polypropylenes with Controlled Stereo-regularity Distribution, Polymer Processing Society 21st Annual Meeting, Polymer Processing Society 21st Annual Meeting, pp. 128, 2005.
• M.Sei, T.Kikutani. Effect of the Positions and Temperatures of Multiple Liquid Isothermal Baths Installed in the Melt Spinning Line on the Properties of As-spun and Drawn Poly(ethylene terephthalate) Fibers, Polymer Processing Society 21st Annual Meeting, Polymer Processing Society 21st Annual Meeting, pp. 147, 2005.
• Y.Kato, H.Ito, T.Kikutani. Fundamental Study on the Preparation of Graded-index Plastic Optical Fibers utilizing Melt Spinning Process of Bicomponent Fibers, PPS2005 - America's Regional Meeting, PPS2005 - America's Regional Meeting, pp. 52, 2005.
• Takeshi Kikutani. Fiber Structure Development in High-Speed Melt Spinning of Poly(L-lactide) with Various D-Lactide Contents and Racemate Polyractide, 2005 International Conference on Advanced Fibers and Polymer Materials, 2005 International Conference on Advanced Fibers and Polymer Materials, Vol. 1, pp. 88-91, 2005.
• X.Q.Shi, H.Ito, T.Kikutani. Characterization on Mixed Crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers, 2005 International Conference on Advanced Fibers and Polymer Materials, 2005 International Conference on Advanced Fibers and Polymer Materials, Vol. 1, pp. 92-95, 2005.
• Xiuqin Shi, Hiroshi Ito, Takeshi Kikutani. Structural Development and Properties of High-speed Melt Spun Poly(butylene terephthalate)/Poly(butylene terephthalate/adipate) Bicomponent Fibers, Asian Workshop on Polymer Processing 2005, Asian Workshop on Polymer Processing 2005, pp. 20, 2005.
• H.Nishimura, T.Kikutani. Viscosity reduction of poly(ethylene terephthalate) melt by dissolution of carbon dioxide,, Polymer Processing Society 20th annual meeting,, Polymer Processing Society 20th annual meeting, Akron, USA, June 20-24, Vol. CD-R, June 2004.
• Hiroshi Ito, Shinichiro Yamagata, Takeshi Kikutani. Formation of PET fibers with controlled diameter variation utilizing drawing process equipped with a vibrator, PPS-20, Polymer Processing Society 20th annual meeting, Akron, USA, June 20-24, Vol. CD-R, 2004.
• Chen Xu, Hiroshi Ito, Takeshi Kikutani. Influence of Transesterification occurring during poly(ethylene terephthalate) poly(trimethylene terephthalate) melt blending on fiber structure development in high high-speed melt spinning process, Polymer Processing Society 20th annual meeting, Polymer Processing Society 20th annual meeting, Akron, USA, June 20-24, Vol. CD-R, 2004.
• Takeshi Kikutani, Kunihiko Kazama, Hiroshi Ito, Masato Masuda, Yoshitsugu Funatsu. Fiber formation in melt spinning process with laser irradiation heating, Polymer Fibres 2004, Polymer Fibres 2004, Manchester, UK, July 14-16, pp. 2a-1, 2004.
• Takeshi Kikutani, Kunihiko Kazama, Hiroshi Ito. Fiber formation in non-steady-state melt spinning process, Polymer Processing Society Asia/Australia regional meeting, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Hiroshi Ito, Yusuke Yagisawa, Takeshi Kikutani. Analysis on structure development of cycloolefin copolymers in elongational flow via on-line birefringence measurement, Polymer Processing Society Asia/Australia regional meeting, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Wan-Gyu Hahm, Hiroshi Ito, Takeshi Kikutani. On-line measurement study in high speed in-line drawing process of poly(ethylene terephthalate) filament, Polymer Processing Society Asia/Australia regional meeting, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Kiyoshi Yamamoto, Masahiro Katagiri, Takeshi Kikutani. Preparation of bicomponent fibers using recycled PET modified with a chain extender, Polymer Processing Society Asia/Australia regional meeting, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Douhiko Terada, Yutaka Kawahara, Takeshi Kikutani. Structure modification of PET in supercritical carbon dioxide fluid, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Yoshiaki Hada, Yuta Hoshino, Hiroshi Ito, Takeshi Kikutani. Fiber structure development in high-speed melt spinning of atactic-PS/syndiotactic-PS bicomponent fibers with various cross-sectional configurations, The Fiber Society Fall Annual Meeting & Technical Conference, Ithaca, USA, October 11-13, pp. 32-33, 2004.
• Masato Masuda, Yoshitsugu Funatsu, Takeshi Kikutani. Effect of CO2 gas laser irradiation in melt spinning process on mechanical properties of PET fibers, The Fiber Society Fall Annual Meeting & Technical Conference, Ithaca, USA, October 11-13, Vol. 128-129, 2004.
• W.Kim, T.Kikutani, H.Ito, Y.W.Kim, S.W.Kim, H.J.Kang. Structure Development of Solution Casting Polycarbonate Film, Polymer Processing Society Asia/Australia regional meeting, Gyeongju, Korea, August 29-September1, Vol. CD-R, 2004.
• Y.Samomura, T.Kikutani, H.Ito. Mechanical Behavior and Application to Rivet-joining of Extruded Polycarbonate, Polymer Processing Society 20th annual meeting, Akron, USA, June 20-24, Vol. CD-R, 2004.
• H.Ito, K.Suzuki, T.Kikutani, T.Kanai, H.J.Kang. Online Birefringence Measurement in Film Blowing Process, ANTEC Tech. Papers, Vol. LXII, No. II, pp. 1856-1859, 2004.
• Fumio Shibuya, Hiroshi, Ito, Kyoung Hou Kim, Hyun Hok Cho, Takeshi Kikutani. Structure and mechanical behaviors under tensile stress of poly(trimethylene terephthalate) fibers prepared in high speed melt spinning process, Polymer Processing Society 20th annual meeting, Akron, USA, June 20-24, Vol. CD-R, 2004.
• T. Kikutani, E. Giza, Hiroshi Ito, NORIMASA OKUI. Fiber Structure Development in High-speed Melt Spinning of Nylon 6/Clay Nanocomposite, Polymer Processing Society, Asia-Australia Regional Meeting, pp. 253-254, 1999.

国内会議発表 (査読なし・不明)

• 高橋哲也, 小倉孝之, 田中啓友, 服部俊治, 工藤栄, 伊村智, 塩谷正俊, 鞠谷雄士. オゾンホール発生時の南極におけるスキンタイプを考慮したコラーゲン人工皮膚を用いた紫外線曝露研究, 平成28年度繊維学会年次大会, 繊維学会予稿集2016, Vol. 71, No. 1, 1E05, June 2016.
• 小山将樹, 林界, 木村遼平, 杉本慶喜, 塩谷正俊, 高橋哲也, 鞠谷雄士. 南極における屋外曝露による高性能繊維の力学物性の変化, 平成28年度繊維学会年次大会, 繊維学会予稿集2016, Vol. 71, No. 1, 3C01, June 2016.
• 高橋哲也, 小倉孝之, 田中啓友, 服部俊治, 工藤栄, 伊村智, 塩谷正俊, 鞠谷雄士. オゾンホール発生時の南極における牛皮組織を用いた紫外線曝露研究, 平成28年度繊維学会年次大会, 繊維学会予稿集2016, Vol. 71, No. 1, 2P170, June 2016.
• 高橋哲也, 鶴永陽子, 塩谷正俊, 鞠谷雄士, 小倉孝之, 田中啓友, 服部俊治. スキンタイプや年齢層を考慮したコラーゲンシートを用いた紫外線によるヒト皮膚へのダメージ評価, 平成27年度繊維学会年次大会, 繊維学会予稿集, 一般社団法人繊維学会, Vol. 70, No. 1, p. 2C16, June 2015.
• 森岡英樹, 宝田亘, 鞠谷. 複合溶融紡糸による新規結晶性ポリシクロオレフィンの繊維構造形成促進, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 353-354, Nov. 2014.
• 柴田晟至, 宝田亘, 鞠谷. 高速DSCを用いた配向非晶ポリエチレンテレフタレート繊維の結晶化挙動解析, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 355-356, Nov. 2014.
• 高田裕貴, 宝田亘, 鞠谷. 非晶フィルムの多段伸長・緩和過程における応力-光学挙動 -変形倍率および歪速度の影響-, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 377-379, Nov. 2014.
• 岩崎年晴, 宝田亘, 鞠谷. 多層ポリオレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 -シール層材の違いによるシール特性への影響2-, プラスチック成形加工学会 第22回秋季大会, 成形加工シンポジア ’１４, プラスチック成形加工学会, pp. 345-346, Nov. 2014.
• 川合康矢, 宝田亘, 鞠谷雄士, 武部智明, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンからなるブレンド繊維の結晶化における成分間相互作用, 第63回 高分子討論会, 高分子学会予稿集, Vol. 63, No. 2, CD-ROM, Sept. 2014.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法による中空糸膜の製造における未延伸糸の構造と中空糸膜の性能の関係, 第63回 高分子討論会, 高分子学会予稿集, Vol. 63, No. 2, CD-ROM, Sept. 2014.
• 河原 豊, 小野里翔大, 宝田 亘, 鞠谷雄士. 高速紡糸PLA/PBT芯鞘複合繊維の構造と物性, 繊維学会 平成26年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 69, No. 1, CD-ROM, June 2014.
• Zhang YuanJing, 宝田亘, 鞠谷雄士. Analysis on fiber spinning behavior in spunbonding process, 繊維学会 平成26年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 69, No. 1, CD-ROM, June 2014.
• 武部智明, 郡洋平, 武部智明, 鞠谷雄士, 金井俊孝. 低立体規則性ポリプロピレンを用いたスパンボンド不織布の成形性と物性, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 281-282, May 2014.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法による複合中空糸膜の作製, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 275-276, May 2014.
• Qing Qin, wataru takarada, TAKESHI KIKUTANI. Fiber Structure Development through Orientation-induced Crystallization in High-speed Melt Spinning of PHBH, Seikei-Kakou Annual Meeting 2014, Preprints of Seikei-Kakou Annual Meeting 2014, pp. 277-278, May 2014.
• 川合康矢, 宝田亘, 鞠谷雄士, 武部智明, 郡洋平, 金井俊孝. ポリプロピレンブレンド繊維の結晶化における立体規則性の異なる2成分間相互作用, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 279-280, May 2014.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層ポリオレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 －シール層材の違いによるシール特性への影響－, プラスチック成形加工学会 第25回年次大会, 成形加工 ’１４, pp. 273-274, May 2014.
• 川村一輝, HEMTHAVYPASOMPHONE, 宝田亘, 鞠谷雄士, 高橋邦夫, 齋藤滋規. 双極型静電誘導ファイバーの配列に際して電極形状が静電力に与える効果, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, 精密工学会, No. J14, pp. 737-738, Mar. 2014.
• 森岡 英樹, 宝田 亘, 鞠谷 雄士. 新規結晶性ポリシクロオレフィンの高速紡糸における繊維構造形成, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 309-310, Oct. 2013.
• 杉浦 聡, 宝田 亘, 鞠谷 雄士. 溶融紡糸・延伸法による複合中空糸膜の作製条件と膜特性の関係, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 243-244, Oct. 2013.
• 岩崎 年晴, 宝田 亘, 鞠谷 雄士. 多層オレフィンフィルムのヒートシール物性の発現機構とヒートシール条件の最適化 ーヒートシール強度の熱処理条件の影響ー, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 235-236, Oct. 2013.
• 鞠谷 雄士. 溶融紡糸過程における伸長流動制御による繊維の高性能・高機能化, プラスチック成形加工学会 第21回秋季大会, 成形加工シンポジア ’１３, プラスチック成形加工学会, pp. 21-22, Oct. 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Spinning behavior of bicomponent fibers in spunbonding process for preparing fiber reinforced composites, Seikei-Kakou Autumnal Meeting 2013, Preprints of Seikei-Kakou Autumnal Meeting 2013, Japan society of polymer processing, pp. 307-308, Oct. 2013.
• 鞠谷雄士. 溶融紡糸法による高機能繊維, 平成25年度 繊維学会秋期研究発表会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 2, pp. 140, Sept. 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における配向挙動に及ぼす予備加熱効果, 平成25年度 繊維学会秋期研究発表会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 2, pp. 81, Sept. 2013.
• 高田裕貴, 宝田亘, 鞠谷雄士. ガラス転移温度近傍における非晶フィルムの伸長・緩和挙動の解析, 平成25年度 繊維学会秋期研究発表会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 2, pp. 20, Sept. 2013.
• Qing Qin, wataru takarada, TAKESHI KIKUTANI. Enhancement of the crystallization of PHBH by applying high-speed melt spinning process, 平成25年度 繊維学会秋期研究発表会, Fiber preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 68, No. 2, pp. 148, Sept. 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエステルフィルムの1軸・2軸伸長における結晶配向挙動に及ぼす予備加熱効果, 第62回 高分子討論会, 高分子学会予稿集, Vol. 62, No. 2, CD-ROM, Aug. 2013.
• 小野里翔大, 花田基洋, 市川 菫, 河原 豊, 宝田 亘, 鞠谷雄士. 高速紡糸PLA/PBT複合繊維の構造, 平成25年度 繊維学会年次大会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 1, CD-ROM, June 2013.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 溶融紡糸過程における炭酸ガスレーザー照射による各種ポリエステル繊維の高強度化, 平成25年度 繊維学会年次大会, 繊維学会予稿集 2013, 繊維学会, Vol. 68, No. 1, CD-ROM, June 2013.
• Y. Chen, W. Takarada, T. Kikutani. Effect of cross-sectional configuration of fibers on fiber formation behavior in bicomponent melt spinning process, 平成25年度 繊維学会年次大会, Fiber preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 68, No. 1, CD-ROM, June 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Preparation of fiber reinforced composites utilizing structure development of bicomponent fibers in spounbonding process, 日本繊維機械学会 第66回 年次大会, 日本繊維機械学会 第66回 年次大会 研究発表論文集, The textile machinery society of japan, pp. 158, May 2013.
• Renukarn, Wataru Takarada, Takeshi Kikutani. Effect of Polymer Characteristics on Fiber Formation Behavior and Web Properties in Melt Blowing Process - Comparison of Polymethylpentene and Polypropylene �, プラスチック成形加工学会 第２４回年次大会, Preprints of Seikei-Kakou Annual Meeting 2013, pp. 231-232, May 2013.
• 杉浦聡, 宝田亘, 鞠谷雄士. ポリプロピレン中空糸の膜特性と溶融紡糸・延伸条件の関係, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 231-232, May 2013.
• 岩崎年晴, 宝田亘, 鞠谷雄士. 多層オレフィンフィルムのヒートシール条件の最適化 ‐ シールバー形状と圧力の影響 ‐, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 229-230, May 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における三次元的配向挙動に及ぼす予備加熱の効果, プラスチック成形加工学会 第２４回年次大会, 成形加工’１３, pp. 233-234, May 2013.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの1軸・2軸伸長における3次元的配向挙動に及ぼす予備加熱効果, 第63回 高分子学会年次大会, 高分子学会予稿集, Vol. 63, No. 1, CD-ROM, May 2013.
• Yuanjing Zhang, Wataru Takarada, Takeshi Kikutani. Effect of processing conditions in preparation of fiber reinforced composites utilizing shath-core bicomponent spinning, 第２０回プラスチック成形加工学会秋季大会, Preprints of Seikei-Kakou Autumnal Meeting 2012, pp. 93, Nov. 2012.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸長・緩和過程における応力－複屈折挙動に及ぼす予備加熱の効果, 第２４回高分子加工技術討論会, 第２４回高分子加工技術討論会要旨集, Oct. 2012.
• Y. Chen, W. Takarada, T. Kikutani. Effect of interface between tow polymers on elongational flow behavior in bicomponent melt spinning process, 平成24年度繊維学会秋期研究発表会, Fiber Preprints, Japan, 一般社団法人 繊維学会, Vol. 67, No. 2, pp. 103, Sept. 2012.
• 岡本謙也, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンの複合紡糸における断面形状が繊維構造に及ぼす効果, 平成24年度繊維学会秋期研究発表会, 繊維学会予稿集, 一般社団法人 繊維学会, Vol. 67, No. 2, pp. 104, Sept. 2012.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 各種ポリエステル繊維の溶融紡糸過程における炭酸ガスレーザー照射が繊維の構造と物性に及ぼす影響, 繊維学会予稿集, Vol. 67, No. 1, pp. 169, June 2012.
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Evaluation of surface roughness development of blend fibers through fiber diameter measurement using various optical equipments, 日本繊維機械学会 第65回 年次大会, 日本繊維機械学会 第65回年次大会 研究発表論文集, 繊維機械学会, pp. 168-169, June 2012.
• 杉浦聡, 宝田亘, 鞠谷雄士. 溶融紡糸・延伸法によるポリプロピレン新規中空糸膜の開発, 繊維学会予稿集, Vol. 67, No. 1, pp. 264, June 2012.
• 毛受広人, 宝田亘, 鞠谷雄士. さまざまな非晶性ポリマーの伸張・緩和過程における応力-光学特性の解析, 繊維学会予稿集, Vol. 67, No. 1, pp. 293, June 2012.
• 藤井良樹, 宝田亘, 荻野裕二, 遠藤了慶, 鞠谷雄士. 熱可塑性液晶繊維の加熱時の寸法変化に及ぼす繊維構造の影響, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 213-214, June 2012.
• 岡本謙也, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 立体規則性の異なるポリプロピレンの複合紡糸における断面形態が繊維形成挙動に及ぼす効果, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 259-260, June 2012.
• 岩崎年晴, 鞠谷雄士. 多層ポリエチレンフィルムの熱シール後の冷却条件と殺菌処理前後のシール強度変化の関係, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 257-258, June 2012.
• 阿部尭永, 宝田亘, 鞠谷雄士. ポリエチレンナフタレートフィルムの伸張・緩和過程における応力・複屈折挙動におよぼす予備加熱の影響, 第２３回プラスチック成形加工学会年次大会, 成形加工 '12, プラスチック成形加工学会, pp. 255-256, June 2012.
• Yiwen Chen, Wataru Takarada, Abdellah Ajji, Takeshi Kikutani. Structure development in melt-spinning of high density polyethylene/polyamide 6 bicomponent fibers, 第２３回プラスチック成形加工学会年次大会, Preprints of Seikei-Kakou Annual Meeting 2012, プラスチック成形加工学会, pp. 253-254, June 2012.
• 毛受広人, 宝田亘, 鞠谷雄士. 二酸化炭素を原料とする脂肪族ポリカーボネートの応力-光学特性の解析, 第２０回 ポリマー材料フォーラム 講演予稿集, pp. 222-223, Nov. 2011.
• 網谷 基氣, 宝田 亘, 鞠谷 雄士. 溶融体構造制御を利用したポリエチレンナフタレート繊維の高強度化, 第１９回成形加工学会秋季大会 成形加工シンポジア '11, 成形加工シンポジア '11, プラスチック成形加工学会, pp. 375-376, Oct. 2011.
• 梅本晋, 薄田健一郎, 宝田亘, 鞠谷雄士, 奥居徳昌. 溶融結晶化過程での飽和型核発生挙動に関する研究, 第60回 高分子討論会, 高分子学会予稿集, 高分子学会, Vol. 60, No. 2, pp. 2972, Sept. 2011.
• 毛受 広人, 宝田 亘, 鞠谷 雄士. 環状オレフィン共重合体の延伸過程における分子鎖挙動の温度・歪速度依存性, 平成２３年度 繊維学会秋期研究発表会, 繊維学会予稿集, 繊維学会, Vol. 66, No. 2, pp. 76, Sept. 2011.
• 鞠谷雄士. ポリエステル繊維高強度化への指針, 第５６回高分子夏季大学, 第５６回高分子夏季大学講演予稿集, pp. 48-51, July 2011.
• X.-S. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of Surface Roughmess Development in Melt Spinning of Blend Fibers for Artificial Hair, The Japan Society of Polymer Processing 22nd Annual Meeting, Preprints of Seikei-Kakou Annual Meeting 2011, The Japan Society of Polymer Processing, p. 213-214, June 2011.
• 櫻井貴宏, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 郡洋平, 金井俊孝. 低立体規則性ポリプロピレンを用いて作製した弾性糸の構造と物性, 第２２回 プラスチック成形加工学会 年次大会, 成形加工 '11, プラスチック成型加工学会, p. 213-214, June 2011.
• 増田正人, 鞠谷雄士. PET溶融紡糸における絡み合い構造変化が繊維物性に与える影響, 平成２３年度 繊維学会年次大会, 繊維学会予稿集, 社団法人 繊維学会, Vol. 66, No. 1, p. 227, June 2011.
• 古山智政, 宝田亘, 鞠谷雄士. 複合高速紡糸繊維を利用した反射型偏光フィルムの試作における繊維構造および断面形状の効果, 平成２３年度 繊維学会年次大会, 繊維学会予稿集, 社団法人 繊維学会, Vol. 66, No. 1, p. 226, June 2011.
• 薄田 健一郎, 梅本 晋, 奥居 徳昌, 宝田 亘, 鞠谷 雄士. ポリエチレンサクシネートの飽和型核発生挙動, 繊維学会年次大会, 繊維学会予稿集, Vol. 66, No. 1, pp. 127, June 2011.
• 網谷基氣, 宝田亘, 鞠谷雄士. 溶融体構造制御を利用したPEN繊維の高強度化, 日本繊維機械学会 第６４回 年次大会, 日本繊維機械学会 第６４回 年次大会 研究発表論文集, 日本繊維機械学会, p. 233, May 2011.
• 澤井賢司, 宝田亘, 鞠谷雄士, 高橋邦夫, 齋藤滋規. 静電誘導ファイバー集積構造による曲面対応静電チャックの開発, 2011年度精密工学会春季大会, 2011年度精密工学会春季大会論文集, pp.877-878, Mar. 2011.
• 古山智政, 宝田亘, 鞠谷雄士. 高速溶融紡糸を利用した反射型偏光フィルムの試作における複合繊維断面形状の効果, 成形加工シンポジア'10, 成形加工シンポジア'10, プラスチック成形加工学会, p. 255, Nov. 2010.
• 鞠谷雄士. 溶融紡糸による温度・応力履歴変化による繊維の構造・物性制御, 高分子討論会, 高分子学会予稿集, Vol. 59, No. 2, p. 3241-3242, Sept. 2010.
• X. Xu, Y. Shirakashi, J. Ishibashi, W. Takarada, T. Kikutani. Mechanism of surface roughness development in melt spinning of blend fibers for artificial hair, 平成２２年度繊維学会秋季大会, Fiber Preprints, Japan, The Society of Fiber Science and Technology, Japan, Vol. 65, No. 3, Sept. 2010.
• 青木里紗, 宝田亘, 鞠谷雄士. PETフィルムの一軸および二軸延伸における複屈折形成挙動に及ぼす熱履歴の効果, 平成２２年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 65, No. 1, p. 189, June 2010.
• 藤井良樹, 荻野祐二, 遠藤了慶, 宝田亘, 鞠谷雄士. 芯鞘型複合紡糸により作製した熱可塑性液晶繊維の力学特性, 平成２２年度繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 65, No. 1, p. 185, June 2010.
• 毛受広人, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーのガラス転移点近傍での伸長挙動の温度・歪速度依存性, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 147, June 2010.
• 内田裕太, 宝田亘, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における繊維構造形成に及ぼす分子鎖剛直性の影響, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 147, June 2010.
• 徐暁師, 白樫豊, 石橋準也, 宝田亘, 鞠谷雄士. 人工毛髪用繊維の溶融紡糸における紡糸条件の繊維表面粗度への影響, 第２１回プラスチック成形加工学会年次大会, 成形加工'10, プラスチック成型加工学会, p. 145, June 2010.
• 早田史明, 宝田亘, 鞠谷雄士, 齋藤滋規. 静電誘導ファイバーによる物体吸着機構の開発, 2010年度精密工学会春季大会, 2010年度精密工学会春季大会論文集, pp.627-628, Mar. 2010.
• 李佳林, 宝田亘, 風間邦彦, 鞠谷雄士. 炭酸ガスレーザー照射溶融紡糸における紡糸線の安定性に関する研究, 第１７回 プラスチック成形加工学会 秋季大会 （成形加工シンポジア'09）, 成形加工シンポジア'09, プラスチック成形加工学会, p. 35, Nov. 2009.
• 古山智政, 宝田亘, 鞠谷雄士. 複合繊維の高速溶融紡糸における複屈折制御性を利用した光学機能繊維の開発, 第１７回 プラスチック成形加工学会 秋季大会 （成形加工シンポジア'09）, 成形加工シンポジア'09, プラスチック成形加工学会, p. 165, Nov. 2009.
• 古山智政, 宝田亘, 鞠谷雄士. 複合繊維の高速溶融紡糸における複屈折制御性を利用した光学機能繊維の開発, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 162, June 2009.
• 内田裕太, 塩谷朋之, 宝田亘, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における繊維構造形成機構に及ぼす分子鎖剛直性の影響, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 163, June 2009.
• LI Jia-Lin, wataru takarada, TAKESHI KIKUTANI. Stability of the melt spinning process of poly(ethylene terephthalate) with CO2 laser irradiation: Experiment and simulation, 平成２１年度 繊維学会年次大会, Fiber Preprints, Japan, 繊維学会, Vol. 64, No. 1, p. 256, June 2009.
• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化, プラスチック成形加工学会 第２０回年次大会, 成型加工'09, プラスチック成形加工学会, p. 215, June 2009.
• X. S. Xu, Y. Shirakashi, J. Ishiashi, W. Takarada, T. Kikutani. Analysis on the development of surface roughness in melt sinning of fibers for artificial hair, プラスチック成形加工学会 第２０回年次大会, JSPP '09 Technical Papers, プラスチック成形加工学会, p. 221, June 2009.
• 櫻井貴宏, 宝田亘, 鞠谷雄士, 武部智明, 南裕, 金井俊孝. 組成分布制御ポリプロピレンを用いた弾性糸の開発, プラスチック成形加工学会 第２０回年次大会, 成型加工'09, プラスチック成形加工学会, p. 225, June 2009.
• 北山雅哉, 宝田亘, 鞠谷雄士. 溶融紡糸により作製したポリエーテルエステル系熱可塑性エラストマー繊維の低温特性, 平成２１年度 繊維学会年次大会, 繊維学会予稿集, 繊維学会, Vol. 64, No. 1, p. 161, June 2009.
• 青木 里紗, 中居 真一, 宝田 亘, 鞠谷 雄士. PETフィルムの逐次二軸延伸過程における複屈折変化, 日本繊維機械学会 第62回年次大会, May 2009.
• 池田佳祐, 宝田亘, 鞠谷雄士. 環状オレフィンコポリマーフィルムの逐次二軸延伸過程における複屈折変化の延伸履歴依存性, 第１６回プラスチック成型加工学会秋季大会 成形加工シンポジア’０８, 成形加工シンポジア’０８, pp. 93-94, Oct. 2008.
• 北山雅哉, 宝田亘, 鞠谷雄士. 溶融紡糸法により作製したポリエーテルエステル系熱可塑性エラストマー繊維の室温及び低温での構造・力学特性評価, 第１６回プラスチック成型加工学会秋季大会 成形加工シンポジア’０８, 成形加工シンポジア’０８, プラスチック成型加工学会, pp. 99-100, Oct. 2008.
• 北山雅哉, 宝田亘, 鞠谷雄士. ソフトセグメントの異なるポリエーテルエステル系熱可塑性エラストマーの溶融紡糸と繊維構造形成, プラスチック成形加工学会 第１９回年次大会, June 2008.
• 池田佳祐, 宝田亘, 鞠谷雄士, 伊藤浩志. 環状オレフィンコポリマーフィルムの二軸伸長過程における複屈折変化, 平成２０年度繊維学会年次大会, 繊維学会予稿集2008, Vol. 63, No. 1 and 2, pp. 97, June 2008.
• 郡洋平, 宝田亘, 鞠谷雄士, 伊藤浩志, 武部智明, 南裕, 金井俊孝. ポリプロピレンの溶融紡糸における低立体規則性成分添加効果 －立体規則性，分子量依存性－, 平成２０年度繊維学会年次大会, 繊維学会予稿集2008, Vol. 63, No. 1 and 2, pp. 92, June 2008.
• 青木里紗, 楊勝林, 宝田亘, 鞠谷雄士, 中居真一. 逐次二軸延伸PET フィルムの高次構造形成に及ぼす延伸履歴依存性, プラスチック成形加工学会 第１９回年次大会, June 2008.
• 末井匠, 塩谷正俊, 櫻井伸一, 山本勝宏, 鞠谷雄士. ポリエステル繊維中に生成するミクロボイドのシンクロトロン放射光を用いた解析, 繊維学会年次大会, 繊維学会予稿集 2008, 繊維学会, Vol. 63, No. 1-2, p. 67, June 2008.
• 戚 媛, 伊藤浩志, 宝田亘, 鞠谷雄士. ポリオキシメチレンの溶融紡糸における紡糸線のレーザー加熱による繊維物性の改良, 日本繊維機械学会第６１回年次大会, May 2008.
• 内田裕太, 塩谷朋之, 宝田亘, 伊藤浩志, 鞠谷雄士. 極微小エアーギャップ溶融紡糸における紡糸過程の安定化と繊維構造形成, 第５７回高分子学会年次大会, May 2008.
• 伊藤浩志, 風間邦彦, 鞠谷. マイクロ射出成形におけるマイクロ成形体の転写性と構造形成, 第１５回 プラスチック成形加工学会秋季大会, 成形加工シンポジア’０７, （社）プラスチック成形加工学会, pp. 89, Nov. 2007.
• 郡洋平, 伊藤浩志, 鞠谷, 武部智明, 南裕, 金井俊孝. 高立体規則性PPの高速溶融紡糸における分子量の異なる低立体規則性PPの添加効果, 第１５回 プラスチック成形加工学会秋季大会, 成形加工シンポジア’０７, （社）プラスチック成形加工学会, pp. 217, Nov. 2007.
• 濱野 陽, 鞠谷 雄士. ポリエチレンテレフタレート未延伸繊維の物性と延伸性の経時変化, 第１５回 プラスチック成形加工学会秋季大会, 成形加工シンポジア’０７, （社）プラスチック成形加工学会, pp. 223, Nov. 2007.
• 志熊治雄, 久保直人, 山本昌幸, 風間邦彦, 伊藤浩志, 鞠谷雄士, 大嶋 正裕. ガス含浸光学ポリマーの熱処理による転写性と構造発現への影響, 第１５回 プラスチック成形加工学会秋季大会, 成形加工シンポジア’０７, （社）プラスチック成形加工学会, pp. 87, Nov. 2007.
• 塩谷正俊, 末井匠, 岡崎亮太, 櫻井伸一, 山本勝宏, 鞠谷雄士. PET繊維の引張変形・破壊過程における構造変化, 繊維学会予稿集, Vol. 62, No. 3, pp. 103, Oct. 2007.
• 鞠谷雄士. 高強度繊維開発, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 91, Oct. 2007.
• 塩谷朋之, 伊藤浩志, 鞠谷. 極微小エアギャップ水冷紡糸により作製したポリエチレンテレフタレート繊維の構造と物性, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 6, Oct. 2007.
• 北山雅哉, 伊藤浩志, 鞠谷. ポリエステル系熱可塑性エラストマーの溶融紡糸と繊維構造形成, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 7, Oct. 2007.
• 垰口, 鞠谷. PETの高分子量化とその押出技術, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 95, Oct. 2007.
• 山崎斉, 鞠谷. PET溶融紡糸における異流動性成分が繊維構造・物性に及ぼす効果, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 96, Oct. 2007.
• 濱野陽, 鞠谷. 溶融紡糸における超臨界二酸化炭素利用の検討, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 97, Oct. 2007.
• 高田悟史, 鞠谷. 紡糸線への炭酸ガスレーザー照射によるPET繊維の高強度化, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 98, Oct. 2007.
• 仲原健介, 鞠谷. 紡糸線制御によるPET繊維の高強度化, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 99, Oct. 2007.
• 發知仁志, 増渕 雄一, 仲原健介, 鞠谷. 紡糸ノズル近傍での流動場制御がからみあいに与える影響の数値解析による検討, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 100, Oct. 2007.
• 仲田一尋, 中村文彦, 大越 豊, 後藤 康夫, 奈倉 正宣, 高田悟史, 鞠谷. 複合溶融紡糸とレーザー延伸によるポリエチレンテレフタレート繊維の高強度化, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 101, Oct. 2007.
• 安井章文, 仲原健介, 濱野陽, 鞠谷, 櫻井伸一. X線散乱による高強度繊維の構造解析, 繊維学会秋季研究発表会, 繊維学会予稿集２００７, （社）繊維学会, Vol. 62, No. 3, pp. 102, Oct. 2007.
• YUAN QI, Hiroshi Ito, TAKESHI KIKUTANI. Effect of Laser-irradiation Heating in Melt Spinning Process on Structure and Properties of As-spun and Drawn Fibers, 平成１９年度 繊維学会年次大会, Fiber Preprints, Vol. 62, No. 1, pp. 93, June 2007.
• 岡崎亮太, 末井匠, 塩谷正俊, 高田悟史, 櫻井 伸一, 山本 勝宏, 鞠谷雄士. ポリエステル繊維の破断挙動におほぼす引張速度の影響, 平成１９年度 繊維学会年次大会, 繊維学会予稿集, Vol. 62, No. 1, pp. 106, June 2007.
• 仲原健介, 鞠谷. 液体恒温槽を用いた高強度PET繊維の開発, 平成１９年度 繊維学会年次大会, 繊維学会予稿集, Vol. 62, No. 1, pp. 105, June 2007.
• 増田正人, 鞠谷. PET溶融紡糸における細化プロフィール変化が繊維特性に与える影響, 平成１９年度 繊維学会年次大会, 繊維学会予稿集, Vol. 62, No. 1, pp. 104, June 2007.
• 濱野陽, 鞠谷. ポリエチレンテレフタレート繊維の未延伸糸物性と延伸挙動の関係, 平成１９年度 繊維学会年次大会, 繊維学会予稿集, Vol. 62, No. 1, pp. 97, June 2007.
• 山本清志, 河原 豊, 伊藤浩志, 鞠谷. 再生原料との複合化によるポリエステル繊維のオリゴマー溶出抑制, 平成１９年度 繊維学会年次大会, 繊維学会予稿集, Vol. 62, No. 1, pp. 94, June 2007.
• Senglin yang, Hiroshi Ito, Takeshi Kikutani, Shinichi Nakai. Experimental and numerical analysis on the tentering process of PET film, 平成１９年度 繊維学会年次大会, Fiber Preprints, Vol. 62, No. 1, pp. 96, June 2007.
• 池田, 伊藤, 鞠谷. 環状オレフィンコポリマーフィルムの一軸・二軸伸長過程における応力・複屈折のオンライン計測, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 283, June 2007.
• 高田, 増田, 鞠谷雄士. PET紡糸における炭酸ガスレーザー照射が繊維特性に及ぼす効果, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 277, June 2007.
• 加藤泰崇, 伊藤, 鞠谷. 低分子物質を混合したポリメチルメタクリレートの複合溶融紡糸における屈折率分布形成に及ぼす成形条件依存性, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 275, June 2007.
• 志熊治雄, 久保直人, 山本昌幸, 風間邦彦, 伊藤浩志, 鞠谷雄士, 大嶋 正裕. ガス含浸ポリカーボネートの可塑化効果による転写性と構造発現への影響, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 219, June 2007.
• 垰口 真一, 石橋準也, 鞠谷雄士. 二軸スクリュー押し出し機内におけるpoly(ethylene terephthalate)の分子量低下挙動の解析, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 273, June 2007.
• 更田誠, 小林由佳, 山田和志, Y.W.Leong, 小滝 雅也, 濱田 泰以, 吉永 耕二, 辛川弘行, 伊藤, 風間, 鞠谷. DMA荷重法によるシリカ充填PMMA複合材料の物性, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 251, June 2007.
• 伊藤, 風間, 鞠谷. 様々なマイクロ成形における高次構造形成, 第１８回成形加工学会年次大会, 成形加工’０７, プラスチック成形加工学会, pp. 209, June 2007.
• 鞠谷雄士. 高強度ポリエステル繊維の開発, 繊維学会年次大会, 繊維学会予稿集2006, Vol. 61, No. 1, pp. 45, June 2006.
• 星野佑太, 伊藤浩志, 鞠谷雄士, 辻本拓哉, 渡辺哲哉, 片山隆. 熱可塑性ポリビニルアルコールの高速溶融紡糸における繊維構造形成機構, 成形加工シンポジア'05, プラスチック成形加工学会, pp. 297-298, 2005.
• 八木沢勇介, 伊藤浩志, 鞠谷雄士. 非晶性環状ポリオレフィンコポリマーの伸長変形による複屈折変化, 成形加工シンポジア'05, プラスチック成形加工学会, pp. 9-10, 2005.
• 風間邦彦, 伊藤浩志, 斉藤卓志, 安原鋭幸, 鞠谷雄士, 國本栄起, 小林博行. 微小プリズム表面を有する薄肉成形品の転写性と高次構造, 成形加工シンポジア'05, プラスチック成形加工学会, pp. 253-254, 2005.
• 伊藤浩志, 風間邦彦, 鞠谷雄士, 大久保健児, 田中茂雄. 超微細成形におけるマイクロディスクの成形性と高次構造, 成形加工シンポジア'05, プラスチック成形加工学会, pp. 255-256, 2005.
• 伊藤浩志, 風間邦彦, 斉藤卓志, 安原鋭幸, 鞠谷雄士. マイクロ薄肉射出成形における転写性と高次構造・物性評価, 第17回日本レオロジー学会高分子加工技術討論会, 第17回日本レオロジー学会高分子加工技術討論会要旨集, Vol. CD-R, No. 07, 2005.
• 伊藤浩志, 八木沢勇介, 斉藤卓志, 安原鋭幸, 鞠谷雄士, 山極佳年. 薄肉射出成形品の構造形成に関する基礎的検討, 第54回理論応用力学講演会, 第54回理論応用力学講演会講演論文集, pp. 375-376, 2005.
• 伊藤浩志, 八木沢勇介, 斉藤卓志, 安原鋭幸, 鞠谷雄士, 山極佳年. マイクロ薄肉成形品の高次構造発現に関する実験的研究, 第54回高分子学会年次大会, 第54回高分子学会年次大会予稿集, Vol. 54, No. 1, pp. 1912, 2005.
• X.Shi, H.Ito, T.Kikutani. Characterization on Mixed-crystal Structure of Biodegradable Poly(butylene adipate-co-terephthalate) Copolymer Fibers, Polymer Preprints, Japan, Vol. 54, No. 1, pp. 1805, 2005.
• 羽田孔明, 伊藤浩志, 鞠谷雄士, 志熊治雄. シンジオタクチックポリスチレンの複合溶融紡糸における可紡性向上, プラスチック成形加工学会年次大会, 成形加工'05, pp. 239-240, 2005.
• 黒田元彦, 伊藤浩志, 鞠谷雄士. ラセミ体ポリ乳酸繊維の昇温・冷却過程における結晶構造変化の分子配向依存性, プラスチック成形加工学会年次大会, 成形加工'05, pp. 237-238, 2005.
• 伊藤浩志, 羽田孔明, 風間邦彦, 安原鋭幸, 斉藤卓志, 鞠谷雄士. マイクロスケール構造体を有する薄肉成形品の成形性と高次構造, プラスチック成形加工学会年次大会, 成形加工'05, pp. 79-80, 2005.
• 伊藤浩志, 安原鋭幸, 斉藤卓志, 鞠谷雄士, 山極佳年. マイクロポリマープロセスの成形性と構造物性に関する基礎研究, プラスチック成形加工学会年次大会, 成形加工'05, pp. 437-438, 2005.
• 風間邦彦, 伊藤浩志, 鞠谷雄士, 増田正人, 船津義嗣. 高強度炭酸ガスレーザー照射高速溶融紡糸における紡糸線の不安定性, 繊維学会年次大会, 繊維学会予稿集2005, Vol. 60, No. 1, pp. 32, 2005.
• 奥村菜重子, 伊藤浩志, 鞠谷雄士, 田島武治, 田中義勝, 森田龍彦, 金井俊孝. 組成分布制御PPを用いた高速溶融紡糸および延伸における繊維の構造形成と物性, 繊維学会年次大会, 繊維学会予稿集2005, Vol. 60, No. 1, pp. 119, 2005.
• 咸完圭, 伊藤浩志, 鞠谷雄士. Mechanism of Structure Development in Poly(ethylene terephthalate) Filaments via High Speed In-line Drawing Process, 繊維学会年次大会, 繊維学会予稿集2005, Vol. 60, No. 1, pp. 30, 2005.
• 塩谷朋之, 伊藤浩志, 鞠谷雄士. Poly(ethylene terephthalate)水冷紡糸における紡糸線の安定性と紡糸速度、溶融延伸比との関係, 第16回繊維連合研究発表会, 第16回繊維連合研究発表会予稿集, pp. 9, 2005.
• 加藤泰崇, 伊藤浩志, 鞠谷雄士. 低分子物質の拡散を利用した芯鞘型複合紡糸繊維断面内の屈折率分布制御, 第16回繊維連合研究発表会, 第16回繊維連合研究発表会予稿集, pp. 8, 2005.
• 伊藤浩志, 風間邦彦, 斉藤卓志, 安原鋭幸, 鞠谷雄士. マイクロ薄肉射出成形における転写性と高次構造・物性評価, 第54回高分子討論会, 第54回高分子討論会予稿集, Vol. 54, No. 2, pp. 5398-5399, 2005.
• 咸完圭, 伊藤浩志, 鞠谷雄士. On-line Measurement Study for Orientation Development of Poly(ethylene terephthalate) Filament in High Speed In-line Drawing Process Polymer, 54th Symposium on Macromolecules, Polymer Preprints, Japan, Vol. 54, No. 2, pp. 5402-5403, 2005.
• 八木沢勇介, 伊藤浩志, 鞠谷雄士. 伸長プロセスにおける非晶ポリオレフィンのオンライン複屈折計測, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 281-282, Nov. 2004.
• 斉藤卓志, 井手慎之助, 伊藤浩志, 安原鋭幸, 佐藤勲, 山極佳年, 鞠谷雄士. 超薄肉射出成形品における対向ウエルドに関する基礎的研究, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 363-364, Nov. 2004.
• 清雅樹, 鞠谷雄士. PET紡糸線上の液体恒温槽が紡糸繊維および延伸繊維特性に及ぼす効果, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 285-286, Nov. 2004.
• 増田正人, 船津義嗣, 風間邦彦, 鞠谷雄士. PET紡糸における炭酸ガスレーザー照射が繊維特性に及ぼす効果の紡糸条件依存性, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 283-284, Nov. 2004.
• 伊藤浩志, 斉藤卓志, 安原鋭幸, 鞠谷雄士, 山極佳年, 室井一男. インテリジェントマイクロポリマー成形システムによる材料特性および成形性の評価, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 375-376, Nov. 2004.
• 伊藤浩志, 八木沢勇介, 斉藤卓志, 安原鋭幸, 鞠谷雄士, 山極佳年. 超薄肉射出成形品の構造形成に関する基礎的検討, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 361-362, Nov. 2004.
• X.Shi, H.Ito, T.Kikutani. Structure Development and Properties of High-speedMelt Spun Poly(butylene terephthalate) / Poly(butylene terephthalate/adipate) bicomponent Fibers, 成形加工シンポジア’04, Japan Society of Polymer Processing, pp. 277-278, Nov. 2004.
• 奥村菜重子, 伊藤浩志, 鞠谷雄士, 田島武治, 田中義勝, 森田龍彦, 金井俊孝. 組成分布制御PPを用いた高速溶融紡糸および延伸における繊維の構造形成と物性, 成形加工シンポジア'04, プラスチック成形加工学会, pp. 279-280, Nov. 2004.
• 伊藤浩志, 星野佑太, 鞠谷雄士. 複合繊維の高速溶融紡糸における繊維構造形成の断面形態依存性, 第16回日本レオロジー学会高分子加工技術討論会, 日本レオロジー学会, pp. 37-38, Oct. 2004.
• 黒田元彦, 伊藤浩志, 鞠谷雄士. ラセミ体ポリ乳酸繊維の昇温過程における結晶構造変化の分子配向依存性, 繊維学会秋季大会発表会, 繊維学会予稿集2004, Vol. 59, No. 3, pp. 11, Sept. 2004.
• 西村浩和, 清雅樹, 千塚健史, 増田正人, 山崎斉, 櫻井伸一, 山本勝宏, 岡本茂, 中前勝彦, 小寺賢, 鞠谷雄士. ポリエチレンテレフタレートの高速紡糸過程における繊維構造形成の広角X線オンライン解析手法の確立, 繊維学会秋季大会発表会, 繊維学会予稿集2004, Vol. 59, No. 3, pp. 17, Sept. 2004.
• 舩井栄志, 櫻井伸一, 原滋郎, 山本勝宏, 岡本茂, 小島潤一, 鞠谷雄士. 高速紡糸ポリエチレンテレフタレート繊維のシンクロトロンX線散乱法による精密構造解析, 繊維学会秋季大会発表会, 繊維学会予稿集2004, Vol. 59, No. 3, pp. 15, Sept. 2004.
• 千塚健史, 鞠谷雄士. 分子量の異なるPET樹脂を用いた海島型複合繊維, 繊維学会秋季大会発表会, 繊維学会予稿集2004, Vol. 59, No. 3, pp. 13, Sept. 2004.
• 星野佑太, 伊藤浩志, 鞠谷雄士. a-PS/s-PS複合繊維の高速溶融紡糸における繊維構造形成の断面形態依存性, 繊維学会秋季大会発表会, 繊維学会予稿集2004, Vol. 59, No. 3, pp. 12, Sept. 2004.
• 風間邦彦, 伊藤浩志, 鞠谷雄士, 増田正人, 船津義嗣. 制御された非定常性を有する高速溶融紡糸における繊維構造形成, プラスチック成形加工学会年次大会, 成形加工'04, pp. 179-182, June 2004.
• 清雅樹, 鞠谷雄士. 高分子量PET直接紡糸延伸法での引取りロールの位置・温度が繊維特性に及ぼす効果, プラスチック成形加工学会年次大会, 成形加工'04, pp. 167-168, June 2004.
• X.Shi, H.Ito, T.Kikutani. Structure development and crystal form transition of melt-spun poly(butylene adipate/butylene terephthalate)biodegradable fibers, 繊維学会年次大会, The Society of Fiber Science and Technology, Japan, Vol. 59, No. 1, pp. 255, June 2004.
• 山本清志, 片桐正博, 鞠谷雄士. 改質したリサイクルPETによる複合繊維の捲縮性発現, 繊維学会年次大会, 繊維学会予稿集2004, Vol. 59, No. 1, pp. 253, June 2004.
• 千塚健史, 鞠谷雄士. 超高分子量/高分子量PET複合繊維, 繊維学会年次大会, 繊維学会予稿集2004, Vol. 59, No. 1, pp. 277, June 2004.
• 増田正人, 船津義嗣, 風間邦彦, 鞠谷雄士. レーザー照射紡糸における紡糸条件が繊維特性に及ぼす効果, 繊維学会年次大会, 繊維学会予稿集2004, Vol. 59, No. 1, pp. 278, June 2004.
• 咸完圭, 風間邦彦, 伊藤浩志, 鞠谷雄士. PETフィラメントの高速インライン延伸過程におけるオンライン計測, プラスチック成形加工学会年次大会, 成形加工'04, pp. 165-166, June 2004.
• 渋谷文雄, 伊藤浩志, 鞠谷雄士. 高速溶融紡糸ポリトリメチレンテレフタレート繊維の構造と応力下の変形挙動, プラスチック成形加工学会年次大会, 成形加工'04, pp. 163-164, June 2004.
• C.Xu, H.Ito, T.Kikutani. PET/PTT溶融ブレンドの高速紡糸による繊維構造形成に対するエステル交換反応の影響, 第53回高分子学会年次大会, 第53回高分子学会年次大会予稿集, Vol. 53, No. 1, pp. IPg035, May 2004.
• 羽田孔明, 伊藤浩志, 鞠谷雄士, 志熊治雄. 高速紡糸シンジオタクチックポリスチレン繊維の結晶構造形成, 第53回高分子学会年次大会, 第53回高分子学会年次大会予稿集, Vol. 53, No. 1, pp. IPa029, May 2004.
• 鞠谷雄士. ポリエステルの溶融紡糸過程における溶融構造制御－高強度化を目指して－, ポリマー材料フォーラム, 高分子学会, pp. 114-115, 2004.
• Yoriko Shimomura, Hiroshi Ito, Takeshi Kikutani. Reversing of Enhancement and Supression Effects in Structure Formation of PP/PE Bicomponent Fibers during High-Speed Spinning Process, Polymer Processing Society Europe/Africa Regional Meeting, pp. CD-R, 2003.

その他の論文・著書など

• 鞠谷雄士. プラスチックで精密部品をつくる：極細繊維の作り方, 高分子, Vol. 66, No. 1, pp. 30-33, Jan. 2017.
• 宝田亘, 鞠谷雄士. 紡糸工学的イノベーションによる新規繊維材料開発, 繊維学会誌, Vol. 72, No. 7, July 2016.
• 鞠谷雄士. 繊維の科学と技術の活性化, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 72, No. 1, pp. P-1-P-1, 2016.
• 大田 善也, 渡邉 久芳, 加藤 真理子, 宝田 亘, 鞠谷雄士. フルオレン含有ポリエステルを用いた複屈折発現性評価法の検討, 成形加工, 一般社団法人 プラスチック成形加工学会, Vol. 27, No. 3, pp. 94-97, Jan. 2015.
• 鞠谷雄士. 繊維研究の夢, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 71, No. 1, pp. P-1-P-1, 2015.
• 鞠谷雄士, 木村邦生, 金谷利治, 濱田州博, 磯貝明, 鋤柄佐千子, 鬘谷要, 松本英俊. 繊維学会創立70周年記念事業 繊維の科学と技術に関する国際シンポジウム2014, 繊維学会誌（繊維と工業）, 一般社団法人繊維学会, Vol. 70, No. 12, pp. 756-766, Dec. 2014.  公式リンク  
  
• 鞠谷雄士. 紡糸工学, 繊維学会誌, Vol. 70, No. 9, P-388 - P-391, Sept. 2014.
• 鞠谷雄士. 清水二郎先生を偲んで, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 70, No. 10, pp. P-698-P-698, 2014.
• 鞠谷雄士. 新たな飛躍へ向けて, 繊維学会誌, The Society of Fiber Science and Technology, Japan, Vol. 70, No. 9, pp. P-345-P-345, 2014.
• 鞠谷雄士. 繊維をつくる研究, 繊維学会誌, Vol. 69, No. 2, pp. "P-41", Feb. 2013.
• 鞠谷雄士. 世界化学年、日本化学連合と繊維学会, 繊維学会誌, Vol. 67, No. 8, p. 123, Aug. 2011.
• 鞠谷雄士. 伸長プロセス専門委員会, 成形加工, Vol. 23, No. 1, pp. 39-40, Dec. 2010.
• 鞠谷雄士. 最近のフィルム成形技術の研究動向, プラスチックス, 工業調査会, Vol. 61, No. 7, pp. 10-15, July 2010.
• 鞠谷雄士. せんいの強さに関わる技術課題, 繊維トレンド, 東レ経営研究所, Vol. 82, No. 5, 6, pp. 66 - 71, May 2010.
• 鞠谷雄士. これからの高分子加工技術, 高分子, 高分子学会, Vol. 59, No. 3, p. 129, Mar. 2010.
• 鞠谷雄士. スペシャリティーファイバー, 繊維学会誌 繊維と工業, 繊維学会, Vol. 66, No. 3, pp. P-82－P-85, Mar. 2010.
• 鞠谷 雄士, 宝田 亘. 複屈折の測定法と解析事例, 繊維学会誌 繊維と工業, 繊維学会, Vol. 66, No. 1, pp. P-39 - P-44, Jan. 2010.
• 鞠谷雄士. プラスチックの材料設計と成形加工性, 自動車技術, 社団法人 自動車技術会, Vol. 63, No. 4, pp. 72-77, Apr. 2009.
• 鞠谷雄士. 高分子材料の極限加工, 繊維学会誌, 繊維学会, Vol. 65, No. 1, pp. 2-4, Jan. 2009.
• 鞠谷雄士. 超高強度繊維, 工業材料, 日刊工業新聞社, Vol. 57, No. 1, pp. 50-51, Jan. 2009.
• 鞠谷雄士. 紡糸・フィルム成形 －10年間の科学・技術の進歩－, 成形加工, 成形加工学会, Vol. 20, No. 8, pp. 509-513, Aug. 2008.
• 鞠谷雄士, 風間邦彦. レーザ照射溶融紡糸による高強度ポリエステル繊維の開発, レーザ加工学会誌, レーザ加工学会, Vol. 15, No. 2, pp. 128-132, July 2008.
• 鞠谷雄士. ひろがる繊維の世界, 洗濯の科学, 洗濯科学協会, Vol. 53, No. 2, pp. 24-32, May 2008.
• 鞠谷雄士. 繊維構造の形成機構と高性能繊維の開発, 繊維学会誌, 繊維学会, Vol. 63, No. 12, Page 417-422, Dec. 2007.
• 鞠谷雄士. プラスチックの材料設計と成形加工性, ポリファイル, 大成社, Vol. 44, No. 525, p. 18-22, Nov. 2007.  公式リンク  
  
• Masatoshi SHIOYA, Tomomi KAWAZOE, Ryota OKAZAKI, Takumi SUEI, Junichi KOJIMA, Shinichi SAKURAI, Katsuhiro YAMAMOTO, Takeshi KIKUTANI. Structure change of PET fiber during tensile deformation up to fracture, Photon Factory Activity Report, High Energy Accelerator Research Organization, # 24, p. 105, 2007.
• 鞠谷雄士, 伊藤浩志. 位相差フィルムにおける厚さと複屈折の測定, マテリアルステージ, Vol. 5, No. 11, pp. 51-59, 2006.
• TAKESHI KIKUTANI. Formation and Structure of High Mechanical Performance Fibers. II. Flexible Polymers, J. Appl. Polym. Sci., Vol. 83, pp. 559-571, 2002.
• Jiro Shimizu, Takeshi Kikutani. Dynamics and Evolution of Structure in Fiber Extrusion, J. Appl. Polym. Sci., Vol. 83, pp. 539-558, 2002.
• 鞠谷雄士. 高速紡糸過程の解析と繊維構造制御, 繊維学会誌, Vol. 55(11), pp. 391-396, 1999.
• 鞠谷雄士. 21世紀の繊維科学の夢－シングルステップファブリケーションの可能性を探る, 染色研究, Vol. 43, No. 4, pp. 89-96, 1999.

特許など

• 鞠谷雄士, 佐藤　駿祐, グリース，トーマス. 擦弦楽器用人工弓毛及びこれを有する擦弦楽器用弓. 特許. 公開. 国立大学法人東京工業大学, 株式会社アデランス. 2023/09/12. PCT/JP2023/033215. 2024/03/21. WO 2024/058179. 2024.
• 鞠谷雄士, 佐藤　駿祐, グリース，トーマス. 擦弦楽器用人工弓毛及びこれを有する擦弦楽器用弓. 特許. 登録. 国立大学法人東京工業大学, 株式会社アデランス. 2022/09/12. 特願2022-144867. 特許第7382609号. 2023/11/09 2023.
• 鞠谷雄士, 宝田亘, 三枝　孝拓. 低収縮及び易加水分解性を有するポリグリコール酸繊維. 特許. 公開. 国立大学法人東京工業大学, 株式会社クレハ. 2020/10/26. 特願2020-179119. 2022/05/12. 特開2022-070091. 2022.
• 鞠谷雄士, 宝田亘, 宮尾友貴, 畑野　貴典　, シティ　サラ. 生分解性繊維の製造方法. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2019/02/15. 特願2019-025873. 2020/08/31. 特開2020-133022. 特許第7289475号. 2023/06/02 2023.
• 鞠谷雄士, 宝田亘, 金澤岳. 弾性繊維およびその製造方法. 特許. 登録. 国立大学法人東京工業大学. 2018/06/05. 特願2018-108143. 2019/12/12. 特開2019-210571. 特許第7237326号. 2023/03/03 2023.
• 鞠谷雄士, 宝田亘, 高崎　緑　, 小林　治樹　, 鶴田　遼　, 徳田　智己　, 中島　啓太. 繊維シートの製造方法. 特許. 登録. 国立大学法人東京工業大学, 国立大学法人京都工芸繊維大学. 2017/06/02. 特願2017-110021. 2018/12/27. 特開2018-204140. 特許第6928345号. 2021/08/11 2021.
• 鞠谷雄士, 宝田亘, 鈴木　紀之　, シティ　サラ　, 福田　竜司　. 生分解性脂肪族ポリエステル系繊維および製造方法. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2017/01/11. 特願2017-561137. 2018/11/01. 再表2017/122679. 特許第6854487号. 2021/03/18 2021.
• 鞠谷雄士, 宝田亘, 鈴木　紀之　, 南　徹也　, 菅谷　剛彦　. ポリエステル繊維. 特許. 登録. 国立大学法人東京工業大学, 株式会社カネカ. 2014/07/16. 特願2015-533951. 2017/03/02. 再表2015/029316. 特許第6592862号. 2019/10/04 2019.
• 鞠谷雄士, 宝田亘, 笹本　太, 上阪　努. 複合中空糸膜およびその製造方法. 特許. 公開. 国立大学法人東京工業大学, 東レ株式会社. 2014/03/12. 特願2014-049157. 2015/10/01. 特開2015-171697. 2015.
• 鞠谷雄士. 弾性繊維及びその製造方法. 特許. 登録. 国立大学法人東京工業大学. 2012/05/21. 特願2012-115951. 2013/12/05. 特開2013-241701. 特許第5999630号. 2016/09/09 2016.
• 鞠谷雄士, 宝田　亘, 中野　幸司, 野崎　京子, 信藤　大輔, 西岡　聖司. 光弾性を有する光学素子. 特許. 公開. 国立大学法人東京工業大学, 国立大学法人　東京大学. 2010/03/16. 特願2010-059846. 2011/09/29. 特開2011-191687. 2011.
• 鞠谷雄士, 山本　清志. 断面形態制御繊維およびその製造方法. 特許. 公開. 国立大学法人東京工業大学, 地方独立行政法人東京都立産業技術研究センター. 2008/09/30. 特願2008-253593. 2010/04/15. 特開2010-084257. 2010.
• 鞠谷雄士, 増田正人, 高田悟史. ポリエステル繊維およびその製造方法. 特許. 公開. 国立大学法人東京工業大学, 旭化成せんい㈱, 帝人ファイバー株式会社, 東洋紡績株式会社, 東レ 株式会社, ユニチカ株式会社. 2008/03/31. 特願2008-094218. 2009/10/22. 特開2009-243021. 2009.
• 齋藤滋規, 鞠谷雄士, ロペスベレンゲレス　ホセオリオル, 目黒　寛之, 多田隈　建二郎. 静電誘導吸着具及び静電誘導吸着方法. 特許. 登録. 国立大学法人東京工業大学. 2006/12/14. 特願2006-336511. 2008/07/03. 特開2008-154301. 特許第4961554号. 2012/04/06 2012.
• 鞠谷雄士, 増田　正人. 捲縮性ポリエステル繊維およびその製造方法. 特許. 公開. 国立大学法人東京工業大学, 東レ 株式会社, 帝人テクノプロダクツ株式会社, 東洋紡績株式会社, 旭化成せんい株式会社, ユニチカファイバー株式会社. 2006/02/16. 特願2006-038813. 2007/08/30. 特開2007-217818. 2007.
• 鞠谷雄士, 清　雅樹, 西村　浩和. ポリエステル繊維の製造方法. 特許. 公開. 国立大学法人東京工業大学, 東レ 株式会社, 帝人ファイバー株式会社, 東洋紡績株式会社, 旭化成せんい㈱, ユニチカファイバー株式会社. 2005/05/23. 特願2005-148935. 2006/12/07. 特開2006-328550. 2006.
• 鞠谷雄士, 山崎　斉. ポリエステル高強度繊維. 特許. 公開. 国立大学法人東京工業大学, 旭化成せんい㈱, 東洋紡績株式会社, 東レ 株式会社, ユニチカファイバー株式会社, 帝人テクノプロダクツ株式会社. 2005/05/31. 特願2005-160432. 2006/12/14. 特開2006-336132. 2006.
• 鞠谷雄士, 西村　浩和, 濱野　陽. ポリエステル繊維. 特許. 公開. 国立大学法人東京工業大学, 東洋紡績株式会社, 旭化成せんい㈱, 帝人テクノプロダクツ株式会社, 東レ 株式会社, ユニチカファイバー株式会社. 2005/05/30. 特願2005-157166. 2006/12/07. 特開2006-328613. 2006.
• 鞠谷雄士, 西村　浩和, 濱野　陽. ポリエステル繊維の製造方法. 特許. 公開. 国立大学法人東京工業大学, 東洋紡績株式会社, 旭化成せんい㈱, 帝人テクノプロダクツ株式会社, 東レ 株式会社, ユニチカファイバー株式会社. 2005/05/30. 特願2005-157160. 2006/12/07. 特開2006-328612. 2006.

学位論文

• ポリエチレンテレフタレートの高速紡糸における繊維構造の形成機構,  本文,  工学博士,  東京工業大学,  1982/03/26,   

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]