|
Publication List - TOMOHISA TANAKA 2010 (12 / 251 entries)
Journal Paper
-
Tomohisa Tanaka,
Ryo Suzuki,
Jiang Zhu,
Yoshio Saito.
Excimer Laser 3D Machining Based on Irradiation Pulse Number Control,
Journal of Advanced Mechanical Design, Systems, and Manufacturing,
The Japan Society of Mechanical Engineers,
Vol. 4,
No. 5,
pp. 1033-1043,
Sept. 2010.
Official location
-
TOMOHISA TANAKA,
Masahiro Komori,
JIANG ZHU,
YOSHIO SAITO.
Development of Flexible Worktable for Endmilling Based on Parallel Mechanism,
Key Engineering Materials,
Trans Tech Publications,
Vol. 447-448,
pp. 826-830,
July 2010.
Official location
-
JIANG ZHU,
Keisuke Nomura,
TOMOHISA TANAKA,
YOSHIO SAITO.
Tool Path Planning Assist System for Freeform Surface Machining,
Key Engineering Materials,
Trans Tech Publications,
Vol. 447-448,
pp. 321-325,
July 2010.
Official location
-
Yuusuke Narabu,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Automatic Manufacturing Feature Extraction of CAD Models for Machining,
Key Engineering Materials,
Trans Tech Publications,
Vol. 447-448,
pp. 287-291,
July 2010.
Official location
International Conference (Reviewed)
International Conference (Not reviewed / Unknown)
Domestic Conference (Not reviewed / Unknown)
-
Kengo Shintaku,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed,
生産と加工に関する学術講演会2010,
Proceeding of the 8th Manufacturing & Machine Tool Conference,
社団法人 日本機械学会,
No. 10-11,
pp. 243-244,
Oct. 2010.
-
Koji Nishiyama,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Tool Path Generation for 2.5-Axis Contour Machining,
Autumn Annual Meeting of the Japan Society for Procession Engineering 2010,
Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010,
The Japan Society of Precision Engineering,
pp. 403-404,
Sept. 2010.
-
Takahiro Kubo,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition,
Abrasive Technoloogy Conference 2010,
Proceeding of Abrasive Technoloogy Conference 2010,
The Japan Society for Abrasive Technology,
pp. 179-180,
Aug. 2010.
-
Yuusuke Narabu,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Automatic Manufacturing Feature Extraction of CAD Models for Machining,
日本機械学会北陸信越支部第47期総会・講演会,
日本機械学会北陸信越支部第47期総会・講演会講演論文集,
社団法人日本機械学会北陸信越支部,
No. 107-1,
pp. 409-410,
Mar. 2010.
-
Masahiro Komori,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools,
Spring Annual Meeting of the Japan Society for Procession Engineering 2010,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010,
The Japan Society of Precision Engineering,
pp. 1039-1040,
Mar. 2010.
-
Keisuke Nomura,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
High-efficiency Processing for Turning Center by Using Multi-resolution Mesh,
Spring Annual Meeting of the Japan Society for Procession Engineering 2010,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010,
The Japan Society of Precision Engineering,
pp. 1037-1038,
Mar. 2010.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|