|
Publication List - TOMOHISA TANAKA 2011 (22 / 252 entries)
Journal Paper
-
Jiang Zhu,
Tomohisa TANAKA,
Yoshio SAITO,
Ryuta TANABE,
Masaaki TAKENAKA,
Toru FUKAMI.
On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool,
Journal of Advanced Mechanical Design, Systems, and Manufacturing,
The Japan Society of Mechanical Engineers,
Vol. 5,
No. 4,
pp. 240-251,
Oct. 2011.
Official location
-
Jiang Zhu,
Yuichi Takekuma,
Tomohisa Tanaka,
Yoshio Saito.
3D Model Registration Based on Feature Extraction,
Advanced Materials Research,
Trans Tech Publications, Switzerland,
Vol. 299-300,
pp. 1091-1094,
July 2011.
Official location
-
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito,
Lining Sun.
Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation,
International Journal of Design Engineering,
Inderscience Enterprises Ltd.,
Vol. 3,
No. 3,
pp. 218-231,
Apr. 2011.
Official location
International Conference (Reviewed)
-
Takahiro Kubo,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region,
The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
The Japan Society of Mechanical Engineers (JSME),
Nov. 2011.
-
Jiang Zhu,
Yusuke Narabu,
Tomohisa Tanaka,
Yoshio Saito.
Manufacturing Feature Extraction System of 3D-Model for Process Planning,
The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
The Japan Society of Mechanical Engineers (JSME),
Nov. 2011.
-
Asim Al-Sofi,
Yoshio Saito,
Tomohisa Tanaka,
Jiang Zhu.
Generating the Measurement Points Based on Finishing NC Data,
2011 IEEE International Conference on Mechatronics (ICM),
Proceeding of 2011 IEEE International Conference on Mechatronics (ICM),
pp. 34-38,
Apr. 2011.
-
Jiang Zhu,
Akira Yanagisawa,
Tomohisa Tanaka,
Yoshio Saito.
Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT),
The 6th International Conference on MicroManufacturing ICOMM/2011,
Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011,
Tokyo Denki University,
pp. 149-156,
Mar. 2011.
International Conference (Not reviewed / Unknown)
-
B. Leban,
M. Pau,
M. Ishida,
T. Tanaka.
On the Reliability and Robustness of a Non-Invasive Experimental Method for the Measurements of Real Area of Contact between Rough Surfaces,
International Tribology Conference Hiroshima 2011,
Oct. 2011.
-
Tsunamitsu Nakahara,
Tomohisa Tanaka.
A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear,
International Tribology Conference, Hiroshima 2011,
International Tribology Conference, Hiroshima 2011,
Oct. 2011.
Domestic Conference (Not reviewed / Unknown)
-
Akimitsu Hozumi,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Development of Processing Support System for 6-axis WEDM,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Yuya Iitsuka,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Wire Structure Forming by Laser Forming,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Saori Muto,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Fabrication and Evaluation of 3D Shape by Rapid Prototyping,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Haruka Tsukasaki,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Development of the Support-free RP Device with 5-axis Control,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Taku Nishio,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Fundamental Research to Construct the Model Made from Heterogeneous Materials by Using Laser,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Shinya Kinoshita,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Research on Appearance of Structural Color by Laser Irradiation to Titanium,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Shota Sekiguchi,
Jiang Zhu,
Tomohisa Tanaka,
Yoshio Saito.
Toolpath Generation for 3D Processing by 8-axis Redundant Robot System,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Shunsuke Oike,
Tomohisa Tanaka,
Jiang Zhu,
Yoshio Saito.
Robust Production Scheduling Using Autonomous Distributed Systems,
Mechanical Engineering Congress, 2011 Japan,
Mechanical Engineering Congress, 2011 Japan,
The Japan Society of Mechanical Engineers,
No. 11-1,
Sept. 2011.
-
Shunsuke Oike,
TOMOHISA TANAKA,
JIANG ZHU,
YOSHIO SAITO.
Robust Production Scheduling Using Autonomous Distributed Systems,
JSME Manufacturing Systems Division Conference 2011,
Proceding of JSME Manufacturing Systems Division Conference 2011,
The Japan Society of Mechanical Engineers,
No. 11-7,
pp. 85-86,
Mar. 2011.
-
Kohei Ogura,
TOMOHISA TANAKA,
JIANG ZHU,
YOSHIO SAITO.
Characteristics of excimer laser ablation for three dimensional machining of PMMA,
Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
The Japan Society of Precision Engineering,
pp. 125-126,
Mar. 2011.
-
Takahiro Kubo,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
High load wear-out evaluation of characteristics by direct contact point observation in rough contact area,
Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
The Japan Society of Precision Engineering,
pp. 759-760,
Mar. 2011.
-
Yuichi Takekuma,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Construction of shape inspection system by comparing three-dimensional models,
Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
The Japan Society of Precision Engineering,
pp. 665-666,
Mar. 2011.
-
Yusuke Narabu,
JIANG ZHU,
TOMOHISA TANAKA,
YOSHIO SAITO.
Development of the automatic machining method deciding system based on 3D-model,
Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011,
The Japan Society of Precision Engineering,
pp. 577-578,
Mar. 2011.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|