|
Publication List - SHINJI KUMAI 2002 (25 / 677 entries)
Journal Paper
-
朱 洪,
田中 寿和,
熊井 真次,
佐藤 彰一.
AC4CHアルミニウム合金金型鋳造材の引裂靭性に及ぼす試験片厚さの影響,
軽金属学会第103回秋期大会講演概要,
pp. 239-240,
2002.
-
齋藤 祐一,
熊井 真次,
佐藤 彰一,
羽賀 俊雄.
高速ロールキャスティングしたAC4Cアルミニウム合金のミクロ組織,
軽金属学会第103回秋期大会講演概要,
pp. 251-252,
2002.
-
N. Yoneyama,
K. Mizoguchi,
S. Kumai,
A. Sato,
M. Kiritani.
Structural refinement and strengthening of an Fe-Mn-Si-Cr-Ni shape memory alloy by high-speed rolling,
Materials Science and Engineering A,
Vol. 350,
pp. 125-132,
2002.
-
N. Yoneyama,
S. Kumai,
A. Sato,
M. Komatsu,
M. Kiritani.
MIcrostructures in an Fe based shape memory alloy and al based dual phase crystals after high speed deformation,
Radiation Effects and Defects in Solids,
Vol. 157,
pp. 109-126,
2002.
-
Shinji Kumai,
Sang-Won Han,
Akikazu Sato.
Fatigue and Fracture of Al-Si-Mg Cast Alloys Produced by Conventional and Semi-Liquid Processes,
Materials Science Forum,
Vol. 396-402,
pp. 1255-1260,
2002.
-
M. Niinomi,
T. Akahori,
K. Fukunaga,
S. Kumai,
M. Kanno.
Possibility of Substituting Mn for Cr in 6061 Aluminum Alloy from the Point of View of toughness and Tensile Properties,
Light Metals 2002,
pp. 829-837,
2002.
-
M. Niinomi,
T.Akahori,
K. Fukunaga,
S. Kumai,
M. Kanno.
Toughness level of 6061 aluminum alloy added with Mn instead of Cr,
Materials Science Forum,
Vol. 396-402,
pp. 1399-1404,
2002.
-
Naoki Yoneyama,
Shinji Kumai,
Masao Komatsu,
Michio Kiritanai.
Microstructures in a Fe Based ShapeMemory Alloy and Al Based Dual Phase Crystals after High Speed Deformation,
Radiation Effects and Defects in Solids,
Vol. 157,
pp. 109-126,
2002.
-
Sang-Won Han,
Koji Katsumata,
Shinji Kumai,
Akikazu Sato.
Effects of solidification structure and aging condition on cyclic stress-strain response in Al-7%Si-0.4%Mg cast alloys,
Materials Science and Engineering A,
Vol. 337,
pp. 170-178,
2002.
-
熊井 真次,
奥津 正人,
米山 夏樹,
佐藤 彰一.
Origin of the initial rapid hardening in a 2024 aluminum alloy aged at 423K,
Journal of Japan Institute of Light Metals,
Vol. 52,
No. 10,
pp. 465-470,
2002.
-
李 光鎮,
熊井 真次,
佐藤 彰一.
アルミニウム合金プレコ-ト材のレーザ溶接と引張特性,
第46回日本学術会議材料研究連合講演会講演論文集,
pp. 258-259,
2002.
-
熊井 真次,
田中 寿和,
佐藤 彰一.
アルミニウム合金鋳物・ダイカストの引裂靭性評価,
第46回日本学術会議材料研究連合講演会講演論文集,
pp. 270-271,
2002.
-
熊井 真次,
田中 寿和,
佐藤 彰一.
Al-Mg-Si系合金鋳造材の引裂靭性評価,
軽金属学会第102回春期大会講演概要,
pp. 7-8,
2002.
-
李 光鎮,
熊井 真次,
佐藤 彰一.
レーザ溶接したアルミニウム合金プレコ-ト材の組織と機械的性質,
軽金属学会第102回春期大会講演概要,
pp. 243-244,
2002.
-
李 光鎮,
新井 貴,
熊井 真次,
佐藤 彰一,
松田 富士子,
齋藤 茂樹,
武士 正美.
レーザ溶接したFe/Al接合材のミクロ組織と力学的性質,
軽金属学会第103回秋期大会講演概要,
pp. 7-8,
2002.
-
若菜 剛介,
熊井 真次,
佐藤 彰一.
摩擦撹拌接合した6061アルミニウム合金薄板の組織と力学的性質,
軽金属学会第103回秋期大会講演概要,
pp. 15-16,
2002.
-
田中 寿和,
熊井 真次,
佐藤 彰一,
下条 雅幸,
津島 健次,
柴田 公博.
交流電位差法を用いたアルミニウム合金ダイカスト切欠き材の破壊解析,
軽金属学会第103回秋期大会講演概要,
pp. 231-232,
2002.
-
安井 健志,
佐藤 宏昌,
熊井 真次,
佐藤 彰一.
Al-Cu-Mg-Ag合金におけるΩ相の高温安定性に及ぼす外力付加の効果,
軽金属学会第103回秋期大会講演概要,
pp. 93-94,
2002.
-
Shinji Muraishi,
Shinji Kumai,
Akikazu Sato.
Stress-oriented nucleation of Ω-phase plates in an Al-Cu-Mg-Ag alloy,
Philosophical Magazine A,
Vol. 82,
No. 2,
pp. 415-428,
2002.
-
Shinji Muraishi,
Shinji Kumai,
Akikazu Sato.
Yield Shear Stress Anisotropy of Al-Cu Single Crystals Containing Single Variant GP Zones,
Materials Science Forum,
Vol. 396-402,
pp. 1001-1006,
2002.
-
Shinji Muraishi,
Nobutaka Niwa,
Atsushi Maekawa,
Shinji Kumai,
Akikazu Sato.
Strengthening of Al-Cu single crystals by stress-oriented Guinier-Preston zones,
Philosophical Magazine A,
Vol. 82,
No. 14,
pp. 2755-2771,
2002.
-
Sang-Won Han,
Shinji Kumai,
Akikazu Sato.
Effects of Solidification Structure on Short Fatigue Crack Growth in Al-7%Si-0.4%Mg Alloy Castings,
Materials Science and Engineering A,
Vol. 332,
pp. 56-63,
2002.
Book
-
熊井 真次,
竹山 雅夫,
入戸野 修,
芳賀 由美子.
材料の科学と工学,
培風館,
培風館,
Vol. 2,
2002.
-
扇澤敏明,
久保山敬一,
熊井真次,
竹山雅夫,
入戸野修,
芳賀由美子,
安盛敦雄.
材料の科学と工学,
培風館,
培風館,
Vol. 4,
2002.
International Conference (Not reviewed / Unknown)
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|