|
Publication List - SHINJI KUMAI 2012 (47 / 677 entries)
Journal Paper
-
髙谷謙斗,
Yohei Harada,
SHINJI KUMAI,
北山健二.
高速固相接合した2024アルミニウム合金スタッドと6N01アルミニウム合金板の界面組織と機械的性質,
軽金属,
Vol. 62,
No. 10,
pp. 370-376,
Oct. 2012.
-
SHINJI KUMAI,
林田 慶祐.
プロジェクション形状改良による2024アルミニウム合金スタッド/5052アルミニウム合金薄板高速固相接合材の接合強度の向上,
軽金属,
軽金属学会,
Vol. 62,
No. 9,
pp. 331-337,
Sept. 2012.
-
Li Gao,
Yohei Harada,
Shinji Kumai.
Analysis of Microstructure Evolution and Precise Solid Fraction Evaluation of A356 Aluminum Alloy during Partial Re-Melting by a Color Etching Method,
Journal of Materials Science,
Vol. 47,
No. 18,
pp. 6553-6564,
Sept. 2012.
-
SHINJI KUMAI,
高谷 謙斗.
高速固相接合した2024アルミニウム合金スタッドと5052アルミニウム合金板の組織と強度に及ぼす板厚の影響,
軽金属,
軽金属学会,
Vol. 62,
No. 8,
pp. 293-299,
Aug. 2012.
-
SHINJI KUMAI.
Microstructural Characterization of Intermediate Layer Produced at aluminum/Metallic Glass Interface Fabricated by Magnetic Pulse Welding,
Materials Transactions,
Vol. 53,
No. 5,
pp. 951-958,
May 2012.
-
SHINJI KUMAI.
Analysis of microstructure evolution and precise solid fraction evaluation of A356 aluminum alloy during partial re-melting by a color etching method,
Jornal of Materials Science,
Springer,
May 2012.
-
SHINJI KUMAI.
スクレイパを用いた単ロール法によるアルミニウム合金板の作製,
軽金属,
Vol. 62,
No. 4,
pp. 146-152,
Apr. 2012.
-
Yamashiki, T.,
Haga, T.,
SHINJI KUMAI,
Watari, H..
Investigation of the influence of the roll surface on the cast strip at the casting using a vertical type high speed twin roll caster,
Applied Mechanics and Materials,
Vol. 184-185,
pp. 271-276,
2012.
-
Haga, T.,
Akitsu, K.,
Kamakura, K.,
SHINJI KUMAI,
Watari, H..
Single roll caster equipped with a scraper,
Key Engineering Materials,
Vol. 504-506,
pp. 1243-1248,
2012.
-
Haga, T.,
SHINJI KUMAI,
Watari, H..
Strip casting of recycled aluminum alloys by a twin roll caster,
Waste and Biomass Valorization,
Vol. 3,
No. 4,
pp. 419-424,
2012.
-
SHINJI KUMAI.
Roll casting of aluminum alloy strip by a single roll caster equipped with a scraper,
Advanced Materials Research,
Vol. 445,
pp. 307-312,
2012.
-
SHINJI KUMAI.
Roll casting of recycled AA5182,
Applied Mechanics and Materials,
Vol. 121-126,
pp. 4667-4670,
2012.
-
SHINJI KUMAI.
A single roll caster for aluminum alloy strip,
Advanced Materials Research,
Vol. 382,
pp. 368-371,
2012.
-
SHINJI KUMAI.
Roll casting of clad strip,
Materials Science forum,
Vol. 706-709,
pp. 1152-1157,
2012.
-
SHINJI KUMAI.
Strip casting of Al-25%Si alloy,
Advanced Materials Research,
Vol. 430-432,
pp. 669-672,
2012.
-
Haga, T.,
Komeda, K.,
Mtsuoka, K.,
SHINJI KUMAI,
Watari, H..
Effect of Si on AA5182 strip cast by a high speed twin roll caster,
Applied Mechanics and Materials,
Vol. 184-185,
pp. 834-837,
2012.
International Conference (Reviewed)
-
SHINJI KUMAI.
EFFECTS OF PLATE THICKNESS AND PROJECTION SHAPE ON THE MICROSTRUCTURE AND STRENGTH OF HIGH-SPEED SOLID-STATE JOINED 2024 ALLOY STUDS AND 5052 ALLOY PLATES,
The 13th International Conference on Aluminum Alloys (ICAA13),
Proceddings of the 13th International Conference on Aluminum Alloys (ICAA13),
TMS (The Minarals, Metals & Materials Society),
pp. 755-760,
June 2012.
-
L. Gao,
Y. Harada,
S. Kumai.
Analysis of Dendritic Primary Al Grain Ripening and Solid Fraction Measurement in A356 Alloy Semi-Solid Slurry Using Segregation Sensitive Reagent,
ICAA13 (The 13th International Conference on Aluminium Alloys),
Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys),
pp. 1425-1430,
June 2012.
-
R. Nakamura,
T. Haga,
Y. Harada,
S. Kumai.
Microstructure of 3003/4045 Aluminum Alloy Clad Strip Fabricated by Vertical Type Tandem Twin Roll Caster,
ICAA13 (The 13th International Conference on Aluminium Alloys),
Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys),
pp. 1463-1467,
June 2012.
-
Y. Harada,
Y. Sada,
S. Kumai.
Joining of 2024 Aluminum Alloy Stud to AZ80 Magnesium Alloy Extruded Plate by Advanced High-Speed Solid-State Method,
ICAA13 (The 13th International Conference on Aluminium Alloys),
Proceedings of ICAA13 (The 13th International Conference on Aluminium Alloys),
pp. 771-776,
June 2012.
-
SHINJI KUMAI.
JOINING OF 2024 ALUMINUM ALLOY STUD TO AX80 MAGNESIUM ALLOY EXTRUDED PLATE BY ADVANCED HIGH-SPEED SOLID-STATE METHOD,
The 13th International Conference on Aluminum Alloys,
Proccedings of the 13th International Conference on Aluminum Alloys,
TMS (The Minerals, Metals & Materials Society),
pp. 771-776,
June 2012.
-
SHINJI KUMAI.
Experimental and Numerical Analysis of Formation Manner of Characteristic Wavy Morphology in Impact Welded Simila- and Dissimilar-Metal Plates,
The 13th International Conference on Aluminum alloys (ICAA13),
Proceedings of the 13th International Conference on Aluminum alloys (ICAA13),
TMS (Minerals, Metals & Materials Society),
pp. 789-794,
June 2012.
-
SHINJI KUMAI.
SINGLE ROLL CASTER TO CAST ALUMINUM ALLOY STRIP,
The 13th International Conference of Aluminum Alloys (ICAA13),
Procedings of the 13th International Conference of Aluminum Alloys (ICAA13),
TMS (Minerals, Metals and Materials Society),
pp. 157-162,
June 2012.
-
SHINJI KUMAI.
MICROSTRUCTURE OF 3003/4045 ALUMINUM ALLOY CLAD STRIP FABRICATED BY VERTICAL TYPE TANDEM TWIN ROLL CASTER,
The 13th International Conferece on Aluminum Alloys (ICAA13),
Proceedings of the 13th International Conferece on Aluminum Alloys (ICAA13),
TMS (Minerals, Metals & Materials Society),
pp. 1463-1467,
June 2012.
-
SHINJI KUMAI.
ANALYSIS OF DENDRITIC PRIMARY Al GRAIN RIPENING AND SOLID FRACTION MEASUREMENT IN A356 ALLOY SEMI-SOLID SLURRY USING SEGREGATION SENSITIVE REAGENT,
The 13th International Conference on Aluminum Alloys (ICAA13),
Proceedings of the 13th International Conference on Aluminum Alloys (ICAA13),
TMS (Minerals, Metals & Materials Society),
pp. 1425-1430,
June 2012.
-
Haga, Toshio,
Tsuge, Hiroshi,
Ishihar, Takuya,
SHINJI KUMAI,
Watari, Hisaki.
ROLL CASTER TO CAST CLAD STRIPS,
13th International Conference on Aluminum Alloys (ICAA),
PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13),
JOHN WILEY & SONS,
pp. 163-168,
2012.
Domestic Conference (Reviewed)
-
石原 拓也,
柘植 浩志,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
707 2層クラッド材を用いた半溶融成形,
機械材料・材料加工技術講演会講演論文集,
一般社団法人日本機械学会,
Vol. 2012,
No. 20,
pp. "707-1"-"707-5",
Nov. 2012.
-
山敷 拓也,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
715 高速双ロールキャスターで作製したアルミニウム合金板にロール面が及ぼす影響,
機械材料・材料加工技術講演会講演論文集,
一般社団法人日本機械学会,
Vol. 2012,
No. 20,
pp. "715-1"-"715-5",
Nov. 2012.
-
鎌倉 鎌倉,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
714 スクレイパーを装備した単ロール法によるアルミニウム合金薄板の作製,
機械材料・材料加工技術講演会講演論文集,
一般社団法人日本機械学会,
Vol. 2012,
No. 20,
pp. "714-1"-"714-5",
Nov. 2012.
-
山崎 雄允,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
702 高速双ロール法により作製したAl合金薄板のインライン圧延,
機械材料・材料加工技術講演会講演論文集,
一般社団法人日本機械学会,
Vol. 2012,
No. 20,
pp. "702-1"-"702-4",
Nov. 2012.
-
鎌倉 圭佑,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
半凝固温度域の広いAl合金の双ロールキャスティング,
機械材料・材料加工技術講演会 M&P,
一般社団法人日本機械学会,
Vol. 20,
pp. 701-1 - 701-5,
Nov. 2012.
-
山敷 拓也,
白川 祐樹,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
716 高速双ロールキャスターで作製したアルミニウム合金板のエッジでのバリにサイドダムプレートが及ぼす影響,
機械材料・材料加工技術講演会講演論文集,
一般社団法人日本機械学会,
Vol. 2012,
No. 20,
pp. "716-1"-"716-4",
Nov. 2012.
-
石原 拓也,
石井 啓太,
柘植 浩志,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
縦型双ロールキャスターによるアルミニウム合金クラッド材の作製,
機械材料・材料加工技術講演会 M&P,
一般社団法人日本機械学会,
Vol. 20,
pp. 713-1 -713-5,
Nov. 2012.
-
山敷 拓也,
藤野 暢人,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
高速双ロールキャスティングにおけるサイドダムプレートの位置がアルミニウム合金薄板エッジでのバリの発生に与える影響,
鋳造工学 全国講演大会講演概要集,
公益社団法人 日本鋳造工学会,
Vol. 160,
pp. 61-61,
2012.
-
鎌倉 圭佑,
羽賀 俊雄,
SHINJI KUMAI,
渡利 久規.
半凝固温度範囲が広域なAl合金の双ロールキャスティング,
鋳造工学 全国講演大会講演概要集,
公益社団法人 日本鋳造工学会,
Vol. 161,
pp. 100-100,
2012.
Domestic Conference (Not reviewed / Unknown)
-
Ryoji Nakamura,
Yohei Harada,
SHINJI KUMAI,
羽賀俊雄,
藤田和子,
新倉昭男.
タンデム式縦型双ロールキャスト法と熱間圧延接合法で作製した4045/3003アルミニウム合金クラッド材の組織と機械的性質,軽金属学会,
軽金属学会 第123回秋期大会,
講演概要集,
軽金属学会,
p. 157,
Nov. 2012.
-
Koshikawa Shouta,
Daisuke Shimosaka,
Yohei Harada,
SHINJI KUMAI.
急冷凝固したAl-11%Si-2.5%Cu合金の曲げ特性に及ぼす共晶Si相形態の影響,
日本鋳造工学会 第161回全国講演大会,
講演概要集,
日本鋳造工学会,
p. 142,
Oct. 2012.
-
Shinsuke Nagano,
unknown unknown,
Yohei Harada,
SHINJI KUMAI.
縦型高速双ロールキャスト法により作製したAl-7%Si合金板材の板厚中央部の組織に及ぼす鋳造条件の影響,
日本鋳造工学会 第161回全国講演大会,
講演概要集,
日本鋳造工学会,
p. 99,
Oct. 2012.
-
Li Gao,
Yohei Harada,
SHINJI KUMAI.
Evaluation of Microstructure and Solid Fractions during Partial re-melting of A356 Aluminum Alloy by a Color Etching Method,
日本金属学会2012年秋期(第151回)大会,
講演概要CD,
日本金属学会,
Sept. 2012.
-
SHINJI KUMAI.
タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織,
軽金属学会第122回春期講演大会,
軽金属学会第122回春期講演大会概要,
pp. 233-234,
May 2012.
-
Yutarou Sada,
Yohei Harada,
SHINJI KUMAI.
高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織,
軽金属学会 第122回春期大会,
講演概要集,
p. 181,
May 2012.
-
Ryoji Nakamura,
Yuichi Tanaka,
羽賀俊雄,
Yohei Harada,
SHINJI KUMAI.
タンデム式縦型双ロールキャスターで作製した3003/4045アルミニウム合金クラッド材の接合界面組織,
軽金属学会 第122回春期大会,
講演概要集,
p. 233,
May 2012.
-
SHINJI KUMAI.
スクレイバーを用いた改良型単ロール法によるアルミニウム合金板の作製,
日本鋳造工学会第160回全国講演大,
日本鋳造工学会第160回全国講演大会講演概要集,
p. 60,
May 2012.
-
SHINJI KUMAI.
高速ロールキャスティングにおけるサイドダムプレートの位置がバリの発生に与える影響,
日本鋳造工学会第160回全国講演大会,
日本鋳造工学会第160回全国講演大会講演概要集,
p. 61,
May 2012.
-
SHINJI KUMAI.
6022アルミニウム合金板の摩擦攪拌スポット接合界面の組織と機械的性質に及ぼすプローブ底面形状の影響,
軽金属学会第122回春期大会,
軽金属学会第122回春期大会講演概要,
pp. 173-174,
May 2012.
-
SHINJI KUMAI.
高速固相接合した2024アルミニウム合金スタッドとAZ80マグネシウム合金板の接合強度と界面組織,
金属学会第122回春期大会,
軽金属学会第122回春期大会講演概要,
pp. 181-182,
May 2012.
-
SHINJI KUMAI.
縦型双ロールキャスターによるクラッド材の作製,
軽金属学会第122回春期講演,
軽金属学会第122回春期講演大会,
pp. 237-238,
May 2012.
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|