Journal Paper

• Yutaka NAKANO, Katsunori CHO, Takamasa HASE, Yuki MATSUMURA, Hiroki TAKAHARA. Experimental study of friction-induced noise generated from the printer fuser assembly (Generation mechanism and countermeasures), Mechanical Engineering Journal, Vol. 11, Issue 2, page 23-00389, Apr. 2024.
• Yutaka Nakano, Tsubasa Kishi, Hiroki Takahara. Experimental Study on Application of Tuned Mass Dampers for Chatter in Turning of a Thin-Walled Cylinder, Applied Sciences, MDPI, Vol. 11, No. 24, Dec. 2021.  Official location  
• Nakano Yutaka, De silva Amal Dilanka, Takahara Hiroki, Akiyama Yu. Countermeasure against Regenerative and Forced Chatter of Flexible Workpieces in Milling Process using Bi-directional Excitation, Transactions of Nanjing University of Aeronautics and Astronautics, Vol. 35, No. 1, pp. 10-19, Feb. 2018.
• Liang, Y., Yamaura, H., Yutaka Nakano, Shirasuna, N.. Characteristic analysis of disc brake squeal signal based on ensemble empirical mode decomposition, Noise Control Engineering Journal, Vol. 64, No. 5, pp. 586-601, 2016.
• Hiroki TAKAHARA, Eiji Nakatsugawa, Yutaka Nakano. Liquid oscillation in a rectangular tank with a core barrel(Condition for internal resonance), Transactions of the JSME (in Japanese), Vol. 81, No. 822, pp. 1-11, Feb. 2015.  Official location  
• Yutaka NAKANO, Hiroki TAKAHARA, Kengo YASUE. The Countermeasure against Forced and Regenerative Chatter in End Milling Process with Multiple Dynamic Absorbers, 日本機械学会論文集, 一般社団法人日本機械学会, Vol. 80, No. 812, pp. 1-12, Apr. 2014.
• Yutaka Nakano, Hiroki Takahara, Eiji Kondo. Countermeasure against chatter in end milling operations using multiple dynamic absorbers, Journal of Sound and Vibration, Elsevier, Vol. 332, No. 6, pp. 1626-1638, Mar. 2013.  Official location  
• HIROKI TAKAHARA, Takayuki SUGIYAMA, Yutaka NAKANO. Characteristics of Random Vibration of Mistuned Bladed Disk, Journal of System Design and Dynamics, The Japan Society of Mechanical Engineers, Vol. 6, No. 1, pp. 120-130, Feb. 2012.  Official location  
• HIROKI TAKAHARA, Takayuki Sugiyama, Yutaka Nakano. Characteristics of Random Vibration of Mistuned Bladed Disk, 日本機械学会論文集 C編, 日本機械学会, Vol. 77, No. 781, pp. 3365-3374, Sept. 2011.  Official location  
• Takashi Nakae, Takahiro Ryu, Atsuo Sueoka, Yutaka Nakano, Takumi Inoue. Squeal and chatter phenomena generated in a mountain bike disc brake, Journal of Sound and Vibration, Vol. 330, No. 10, pp. 2138-2149, May 2011.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO. Vibrations of probe used for the defect detection of helical heating tubes in a fast breeder reactor (Part 3. The mechanism of the vibration and the countermeasures), Nuclear Engineering and Design, Volume 238, # 8, pp. 1459-1470, June 2008.
• Atsuo SUEOKA, Takahiro RYU, Yutaka NAKANO, Toshihiro YAMAZAKI, Takashi NAKAE, Daisuke KAWAHARA. Countermeasure against Squeal in Car Disc Brakes by a Dynamic Absorber, Transactions of the Japan Society of Mechanical Engineers. C, 日本機械学会, Vol. 73, No. 734, pp. 2653-2662, Oct. 2007.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO. Vibrations of probe used for the defect detection of helical heating tubes in a fast breeder reactor (Part 2. Vibration analysis and numerical simulations), Nuclear Engineering and Design, Volume 237, # 8, pp. 868-879, Apr. 2007.
• Takumi Inoue, Atsuo Sueoka, Yutaka Nakano, HIROYUKI KANEMOTO, YOSHIYUKI IMAI, TOSHIHIKO YAMAGUCHI. Vibrations of probe used for the defect detection of helical heating tubes in a fast breeder reactor (Part 1. Experimental results by using mock-up), Nuclear Engineering and Design, Volume 237, # 8, pp. 858-867, Apr. 2007.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO, YUKITAKA MURAKAMI. 高速増殖炉ヘリカル伝熱管探傷プローブの振動によるセンサノイズとその対策 (第3報, 数値シミュレーションによるパラメータスタディ), 日本機械学会論文集（C編）, Vol. 72, No. 722, pp. 3185-3192, Oct. 2006.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu, HIDEYO IEFUJI, TOSHIAKI ORII, Takashi Nakae. Countermeasure and Analysis of Squeal in Bicycle Disk Brakes, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 72, No. 720, pp. 2373-2381, Aug. 2006.
• Atsuo Sueoka, Takumi Inoue, Yutaka Nakano, HIROYUKI KANEMOTO, YOSHIYUKI IMAI, TOSHIHIKO YAMAGUCHI, KAZUHISA OMURA, YUKITAKA MURAKAMI. Sensor Noise Caused by Vibrations of Flaw Detection Probe Generated in Helical Heating Tubes in a Fast Breeder Reactor and Its Countermeasures : 1st Report, Experimental Results by Using Mock-up, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 72, No. 714, pp. 371-379, Feb. 2006.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO, YUKITAKA MURAKAMI. Sensor Noise Caused by Vibrations of Flaw Detection Probe Generated in Helical Heating Tubes in a Fast Breeder Reactor and Its Countermeasures : 2nd Report, Numerical Simulations of Probe Vibration, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 72, No. 714, pp. 380-387, Feb. 2006.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu. Squeal of Rigid Type Disk Brake for Car, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 70, No. 700, pp. 3398-3405, Dec. 2004.
• Atsuo Sueoka, Takahiro Ryu, KENJI SHIROZU, ATSUHIRO EMURA, Yutaka Nakano. Experimental Investigation on Squeal and Chatter Phenomena in Bicycle Disk Brakes : 2nd Report, Generation Mechanisms of Squeal and Chatter and Their Countermeasures, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 70, No. 689, pp. 38-45, Jan. 2004.
• Takahiro Ryu, Atsuo Sueoka, KENJI SHIROZU, ATSUHIRO EMURA, Yutaka Nakano. Experimental Investigation on Squeal and Chatter Phenomena in Bicycle Disk Brakes : 1st Report, Regeneration Experiments of Squeal and Chatter and Their Characteristics, Transactions of the Japan Society of Mechanical Engineers. C, Vol. 70, No. 689, pp. 30-37, Jan. 2004.

International Conference (Reviewed)

• Yutaka Nakano, Satoru Sekikawa, Hiroki Takahara. Numerical Study of Chatter Control in End Milling Process by Workpiece Excitation, IUTAM Symposium on Nonlinear dynamics for design of mechanical systems across different length/time scales, Proceedings of 2023 IUTAM Symposium, July 2023.
• Yutaka NAKANO, Takumi KOBAYASHI, Hiroki TAKAHARA. A Novel Design Concept of Tuned Mass Damper for Chatter in End Milling Process, 18th International Conference on Precision Engineering, Proceedings of ICPE2020, Nov. 2020.
• Y. Nakano, T. Kishi, H. Takahara, L.Croppi, A.Scippa. Experimental Investigation on the Effect of Tuned Mass Damper on Mode Coupling Chatter in Turning Process of Thin-Walled Cylindrical Workpiece, the 18th Asia-Pacific Vibration Conference, Nov. 2019.
• Yuki Matsumura, Yutaka Nakano, Yuki Matsumura, Takamasa Hase, Hiroki Takahara. Experimental Investigation on Generation Mechanism of Friction Vibration in Toner Fixing Device, The 18th Asia-Pacific Vibration Conference, Nov. 2019.
• Yutaka Nakano, Hiroki Takahara, Akihito Kobayashi. DESIGN OF TUNED MASS DAMPER FOR FORCED CHAT-TER AND REGENERATIVE CHATTER IN END MILLING PROCESS OF LOW-RIGIDITY WORKPIECE, the 25th International Congress on Sound and Vibration, Proceedings of 25th International Congress on Sound and Vibration, No. 473, pp. 1-8, July 2018.
• Yutaka NAKANO, Hiroki TAKAHARA, Noriyuki SHIRASUNA. Effect of Radial Contact Area of Brake Pad on In-plane Squeal of Automotive Disk Brake, 16th Asia Pacific Vibration Conference, Proceedings of the 16th Asia Pacific Vibration Conference, Nov. 2015.
• Nakano Yutaka, Takahara Hiroki, Akiyama Yu. Improvement of Workpiece Chatter Stability in EndMilling Process by Workpiece Excitation, The 22nd International Congress on Sound and Vibration, Proceedings of the 22nd International Congress on Sound and Vibration, July 2015.
• Nakano Yutaka, Takahara Hiroki, Goto Yusuke, Shirasuna Noriyuki. THE EFFECT OF CONTACT AREA OF BRAKE PAD ON DISC BRAKE SQUEAL, FISITA 2014 World Automotive Congress, Proceedings of FISITA 2014 World Automotive Congress, pp. 1-9, June 2014.
• Yutaka Nakano, Hiroki Takahara. Design method of multiple dynamic absorbers for suppressing chatter in end-milling operation, the XI International Conference on Recent Advances in Structural Dynamics, Proceedings of the XI International Conference on Recent Advances in Structural Dynamics, No. 999, pp. 1-15, July 2013.
• Yutaka Nakano, Hiroki Takahara, Kengo Yasue, Ryutaro Asaga. THE EFFECT OF MULTIPLE DYNAMIC ABSORBERS ON REGENERATIVE CHATTER AND RESONANCE IN END MILLING PROCESS, The ASME 2012 International Mechanical Engineering Congress & Exposition IMECE2012, Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, Nov. 2012.
• Yutaka Nakano, Hiroki Takahara, Ryohei Tanaka, Ryo Iyoda. ACTIVE DISK BRAKE SQUEAL SUPPRESSION USING PIEZOELECTRIC ACTUATOR, The 19th International Congress on Sound and Vibration, Proceedings of the 19th International Congress on Sound and Vibration, No. 202, pp. 1-7, July 2012.
• Yutaka NAKANO, Hiroki TAKAHARA, Hirotaka MATSUMOTO. Investigation into Vibration Absorbers Attached to Tool Holder against Chatter in End Milling Operations, The 14th Asia Pacific Vibration Conference, Proceedings of the 14th Asia Pacific Vibration Conference, Vol. 3, pp. 1503-1512, Dec. 2011.
• Yutaka Nakano, Hiroki Takahara. COUNTERMEASURE AGAINST REGENERATIVE CHATTER IN END MILLING OPERATIONS WITH VIBRATION ABSORBERS, ASME 2010 International Mechanical Engineering Congress & Exposition, Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, Dec. 2010.
• Takashi Nakae, Takahiro Ryu, Atsuo Sueoka, Yutaka Nakano, Takumi Inoue. Squeal and Chatter Phenomena Generated in a Mountain Bike Disc Brake, 2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS, CD-ROM Proceedings of 2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS, No. 43, Jan. 2010.
• Yutaka Nakano, Hiroki Takahara. Experimental and Analytical Chatter Prediction Method in End-Milling Process, 2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS, CD-ROM Proceedings of 2nd INTERNATIONAL CONFERENCE ON VIBRO-IMPACT SYSTEMS, No. 37, Jan. 2010.
• Yutaka Nakano, Eiji Kondo, Eiji Kaneda, Norio Kawagoishi. Simple Identification Method of Stability Chart of Regenerative Chatter Vibrations in End-Milling Process, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, CD Proceeding, No. 1D9, Nov. 2009.
• Eiji KONDO, Ryuji FUCHIUE, Yutaka NAKANO, Kenta MATSUMOTO, Norio KAWAGOISHI. Development of Dynamic Vibration Absorber with Parallel Flat Springs for Damping of Spindle Head Vibrations in Machining Center, 13th Asia Pacific Vibration Conference, CD-ROM Proceedings of the 13th Asia-Pacific Vibration Conference (APVC2009), pp. 1-9, Nov. 2009.
• Yutaka NAKANO, Eiji KONDO, Hiroki TAKAHARA. Stability Analysis and Countermeasure against Regenerative Chatter in End Milling Process, 13th Asia Pacific Vibration Conference, CD-ROM Proceedings of the 13th Asia-Pacific Vibration Conference(APVC2009), pp. 1-10, Nov. 2009.
• Yutaka Nakano, Takashi Nakae, Takahiro Ryu, Toshihiro Yamasaki, Atsuo Sueoka. Experimental investigation on countermeasure against squeal phenomena in a car disk brake by a dynamic absorber, The 12th Asia-Pacific Vibration Conference, Proceedings of the 12th Asia-Pacific Vibration Conference, Aug. 2007.
• Takashi Nakae, Yutaka Nakano, Takahiro Ryu, Atsuo Sueoka. Experiment and Analysis of Squeal Phenomena Generated in Bicycle Disc Brakes, The 12th Asia-Pacific Vibration Conference, Proceedings of the 12th Asia-Pacific Vibration Conference, Aug. 2007.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO. Vibration of Flaw Detection Probe in a Heating Tubes Installed in a Fast Breeder Reactor, The Eleventh Asia-Pacific Vibration Conference, Proceedings of the Eleventh Asia-Pacific Vibration Conference, Vol. 1, pp. 294-299, Nov. 2005.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu. Experimental Investigation on Countermeasure Against Squeal Phenomena in a Bicycle Disk Brake by a Dynamic Absorber, The Eleventh Asia-Pacific Vibration Conference, Proceedings of the Eleventh Asia-Pacific Vibration Conference, Vol. 1, pp. 120-125, Nov. 2005.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu. Experimental Investigation on Squeal and Chatter Phenomena in Bicycle Disk Brake(Part 2, Generation Mechanism of Squeal and Chatter and their Countermeasures), The Tenth Asia-Pacific Vibration Conference, Proceedings of the Tenth Asia-Pacific Vibration Conference, Vol. 2, pp. 509-514, Nov. 2003.
• Takahiro Ryu, Atsuo Sueoka, Yutaka Nakano, Takumi Inoue. Experimental Investigation on Squeal and Chatter Phenomena in Bicycle Disk Brake(Part 1, Regeneration Experiments of Squeal and Chatter and their Characteristic), The Tenth Asia-Pacific Vibration Conference, Proceedings of the Tenth Asia-Pacific Vibration Conference, Vol. 2, pp. 579-584, Nov. 2003.

International Conference (Not reviewed / Unknown)

• Takamasa Hase, Yutaka Nakano, Hiroki Takahara, Yuki Matsumura. Experimental investigation on friction vibration in toner fixing device, 4th International Conference on VIBRO-IMPACT SYSTEMS, Book of Abstracts of 4th International Conference on VIBRO-IMPACT SYSTEMS, page 41, July 2018.
• Yutaka Nakano, Amal Dilanka De Silva, Hiroki Takahara. COUNTERMEASURE AGAINST REGENERATIVE AND FORCED CHATTER OF FLEXIBLE WORKPIECES IN MILLING PROCESS USING A TWO DIRECTIONAL EXCITATION, The 17th Asian Pacific Vibration Conference, Proceedings of the 17th Asian Pacific Vibration Conference, pp. 1-12, Nov. 2017.
• Yutaka Nakano, Hiroki Takahara, Yu Akiyama. THE EFFECT OF TIME DELAY VARIATION INDUCED BY WORKPIECE EXCITATION ON REGENERATIVE CHATTER IN MILLING, 24th International Congress on Sound and Vibration, Proceedings of 24th International Congress on Sound and Vibration, # 1274, pp. 1-8, July 2017.
• Takahiro Ryu, Atsuo Sueoka, KENJI SHIROZU, Yutaka Nakano. Squeal Noise Suppression in Floating and Rigid Type Car Disk Brakes by Partial Cutting of Pad Surfaces, The Sixth International Conference on Motion and Vibration Control, Proceedings of the Sixth International Conference on Motion and Vibration Control, Vol. 2, pp. 1033-1038, Aug. 2002.

Domestic Conference (Not reviewed / Unknown)

• Yutaka Nakano, Naofumi Yoshida, 大井 一浩, HIROKI TAKAHARA. 回転切削器具の振動モニタリングによる顎変形症手術支援に関する研究, Dynamics and Design Conference 2023, Proceedings of Dynamics and Design Conference 2023, Aug. 2023.
• Yutaka NAKANO, Ryuichi YABE, Hiroki TAKAHARA. Suppression of chatter in turning process of a thin-walled cylindrical workpiece using tuned mass dampers（Comparison of chatter suppression effect on circumferential arrangement of tuned mass dampers）, Dynamics and Design Conference 2022, Proceedings of Dynamics and Design Conference 2022, Sept. 2022.
• Yutaka NAKANO, Rui YAMAZAKI, Hiroki TAKAHARA. Effect of radial contact area between pads and disk on out of plane squeal of disk brakes, 第66 回理論応用力学講演会, June 2022.
• HIROKI TAKAHARA, Taiga Konuma, Yutaka Nakano. Estimation of the volume of overflow in two-dimensional sloshing by using liquid surface displacement, Dynamics and Design Conference 2021, Proceeding of Dynamics and Design Conference 2021, Sept. 2021.
• Yutaka Nakano, Katsunori Chiyo, Takamasa Hase, HIROKI TAKAHARA. Investigation on Generation Mechanism of Friction-induced Vibration in a Printer Fuser Unit, Dynamics and Design Conference 2021, Proceeding of Dynamics and Design Conference 2021, Sept. 2021.
• HIROKI TAKAHARA, Souichirou Niimi, Yutaka Nakano. 偏心二重円筒容器内液面の内部共振特性, Dynamics and Design Conference 2020, Sept. 2020.
• Yutaka NAKANO, Yuki MATSUMURA, Takamasa Hase, Hiroki TAKAHARA. Generation Mechanism of Friction Induced Noise Generated in a Printer Fuser Unit, Dynamics and Design Conference 2020, Proceeding of Dynamics and Design Conference 2020, Aug. 2020.
• Yutaka NAKANO, Masahiro KANEMARU, Hiroki TAKAHARA, Kazuhiro OoI. Support for oral surgery by vibration monitoring of rotating cutting tool, Dynamics and Design Conference 2019, Aug. 2019.
• HIROKI TAKAHARA, Kouhei Abe, Yutaka Nakano. Sloshing Analysis in a rectangular tank with overflow by using bulging modes, Dynamics and Design Conference 2019, Dynamics and Design Conference 2019, No. 610, Aug. 2019.
• HIROKI TAKAHARA, Morihiro Aoyagi, Yutaka Nakano. Vibration Analysis of Blade System with RandomMistune Using Stochastic Method, Dynamics and Design Conference 2018, Dynamics and Design Conference 2018 USB講演論文集, No. 430, Aug. 2018.
• Yutaka Nakano, Tsuyoshi Kikkawa, HIROKI TAKAHARA. Vibration Suppression in Structure with Low Natural Frequency Using Dynamic Absorber Composed of Magnetic Spring and Magnetic Damper, Dynamics and Design Conference 2018, Dynamics and Design Conference 2018 USB講演論文集, No. 124, Aug. 2018.
• HIROKI TAKAHARA, Daisuke Shibuya, Yutaka Nakano, Tadashi Iijima, Shun Fujita, Yuichi Ushio. Sloshing analysis for rectangular tank with overflowing liquid by using virtual wall, Dynamics and Design Conference 2018, Dynamics and Design Conference 2018 USB講演論文集, No. 401, Aug. 2018.
• HIROKI TAKAHARA, Jin Aoyagi, Yutaka Nakano. Nonlinear oscillation of multi-surface liquid in a rectangular tank(Occurrence condition of three dimensional oscillation subjected to excitation parallel to a baffle which divides the liquid surface), Dynamics and Design Conference 2017, Dynamics and Design Conference 2017 USB講演論文集, 日本機械学会, Aug. 2017.
• Yutaka Nakano, Tsuyoshi Kikkawa, HIROKI TAKAHARA. Study on vibration suppression for structures with low natural frequency using dynamic absorber with magnetic spring, Dynamics and Design Conference 2016, Dynamics and Design Conference 2016 USB講演論文集, 日本機械学会, Aug. 2016.
• HIROKI TAKAHARA, Eiji Nakatsugawa, Yutaka Nakano. Characteristic of nonlinear liquid oscillation in a rectangular tank with a core barrel, Dynamics and Design Conference 2016, Dynamics and Design Conference 2016 USB講演論文集, 日本機械学会, Aug. 2016.
• Daisuke Shibuya, HIROKI TAKAHARA, Yutaka Nakano, NA, Yuuichi Ushio. Overflow Characteristics of Sloshing in a Rectangular Tank, 関東学生会第55回学生員卒業研究発表講演会, 日本機械学会関東支部第55回卒業研究発表講演会講演論文集, 日本機械学会 関東支部, Mar. 2016.
• HIROKI TAKAHARA, Takuya Shinjo, Yutaka Nakano. Effect of Damping upon Characteristic of Vibration System with Negative Effective Mass, 関東支部第22期総会・講演会, 日本機械学会関東支部第22期総会講演会講演論文集, 日本機械学会 関東支部, Mar. 2016.
• Yutaka NAKANO, Yu AKIYAMA, Hiroki TAKAHARA. Suppression mechanism of regenerative chatter in milling of low-rigidity workpiece by forced excitation, Dynamics and Design Conference 2015, Dynamics and Design Conference 2015 USB講演論文集, Aug. 2015.
• HIROKI TAKAHARA, Jin Aoyagi, Yutaka Nakano. Three dimensional nonlinear oscillation of multi-surface liquid in a rectangular tank (Liquid oscillation subjected to excitation parallel to a baffle which divides the liquid surface), Dynamics and Design Conference 2015, Dynamics and Design Conference 2015 USB講演論文集, 日本機械学会, Aug. 2015.
• Hiroki TAKAHARA, Eiji NAKATSUGAWA, Yutaka NAKANO. Nonlinear liquid oscillation in a rectangular tank with a core barrel, Dynamics and Design Conference 2014, Dynamics and Design Conference 2014 USB講演論文集, Aug. 2014.
• Yutaka NAKANO, Kengo KAWAI, Hiroki TAKAHARA. Effect of workpiece excitation on regenerative chatter of workpiece, Dynamics and Design Conference 2014, Dynamics and Design Conference 2014 USB講演論文集, Aug. 2014.
• Yutaka NAKANO, Noriyuki SHIRASUNA, Yusuke GOTO, Yusuke IMAI, Hiroki TAKAHARA. Effect of radial contact area between disk and pad on brake squeal, Dynamics and Design Conference 2014, Dynamics and Design Conference 2014 USB講演論文集, Aug. 2014.
• Hiroki TAKAHARA, Hiroaki MATSUMIYA, Yutaka NAKANO. Vibration characteristics of mistuned bladed disk subject to stochastic and deterministic excitation, Dynamics and Design Conference 2013, Dynamics and Design Conference 2013 CD-ROM講演論文集, pp. 1-10, Aug. 2013.
• Yutaka NAKANO, Hiroki TAKAHARA, Ryutaro ASAGA. Chatter Suppression in End Milling Process(Design of Multiple Dynamic Absorbers Attached to Rotating System), Dynamics and Design Conference 2013, Dynamics and Design Conference 2013 CD-ROM講演論文集, pp. 1-10, Aug. 2013.
• Yutaka Nakano, Kengo Yasue, HIROKI TAKAHARA. The Effect of Multiple Dynamic Absorbers on Forced and Regenerative Chatter in End Milling Process, Dynamics and Design Conference 2012, Dynamics and Design Conference 2012 CD-ROM講演論文集, No. 214, pp. 1-10, Sept. 2012.
• Yutaka Nakano, Ryutaro Asaga, HIROKI TAKAHARA. The Chatter Stability Limit Decision Method with Akaike’s Information Criterion, Dynamics and Design Conference 2012, Dynamics and Design Conference 2012 CD-ROM講演論文集, No. 213, pp. 1-8, Sept. 2012.
• Hiroki Takahara, Naoki Arakawa, Kentaro Sezaki, Yutaka Nakano. Three-dimensional liquid oscillation in a rectangular container supported by pendulum, Dynamics and Design Conference 2012, Dynamics and Design Conference 2012 USB講演論文集, No. 854, pp. 1-10, Sept. 2012.
• Shinichi MARUYAMA, Akira HARADA, Shinji TAMURA, Yutaka NAKANO, Yohei HOSHINO. Research Trend in Basic Theory of Vibration, Dynamics and Design Conference 2011, pp. 1-7, Sept. 2011.
• Yutaka NAKANO, Hiroki TAKAHARA, Ryohei TANAKA. Countermeasure of Disk Brake Squeal by Using Dither Control, Dynamics and Design Conference 2011, Dynamics and Design Conference 2011 CD-ROM講演論文集, No. 405, pp. 1-7, Sept. 2011.
• Hiroki TAKAHARA, Takayuki SUGIYAMA, Yutaka NAKANO. Characteristics of Random Vibration ofMistuned Bladed Disk, Dynamics and Design Conference 2011, Dynamics and Design Conference 2011 CD-ROM講演論文集, No. 534, Sept. 2011.
• Yutaka NAKANO, Hirotaka MATSUMOTO, Hiroki TAKAHARA. Characteristics of Multiple Dynamic Absorbers for Chatter Suppression in End Milling Process, Dynamics and Design Conference 2011, Dynamics and Design Conference 2011 CD-ROM講演論文集, No. 406, Sept. 2011.
• Yutaka Nakano, HIROKI TAKAHARA, Takurou Sonoda, Tomoki Hatao. Countermeasure against regenerative chatter in end milling operation by dynamic absorbers attached to rotating tool holder, Dynamics and Design Conference 2010, Dynamics and Design Conference 2010 CD-ROM講演論文集, 日本本機械学会, No. 353, pp. 1-6, Sept. 2010.
• Yutaka Nakano, Eiji Kondo, HIROKI TAKAHARA. Countermeasure against Chatter in End Milling Process by Dynamic Absorbers, Dynamics and Design Conference 2009, D&D2009. 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 328, Aug. 2009.
• Yutaka Nakano, Eiji Kondo. Stability Analysis of Chatter in End Milling Process, D&D2008, Proceedings of the Dynamics and Design Conference (CD-Rom), The Japan Society of Mechanical Engineers, Dynamics, Measurement and Control Division, No. 441, Sept. 2008.
• Kenta Matsumoto, 櫻庭 肇, Yutaka Nakano, Eiji Kondo. エンドミル加工の加工誤差に及ぼす工作機械系の振動特性の影響, ２００７年度精密工学会九州支部「長崎地方学術講演会」, # 104, Dec. 2007.
• Eiji Kaneda, Yutaka Nakano, Eiji Kondo. エンドミル加工におけるびびり振動の監視(振動解析による動的安定性の評価), 第26回計測自動制御学会九州支部学術講演会, # 102B4, Dec. 2007.
• Takashi Nakae, Atsuo Sueoka, Takahiro Ryu, Yutaka Nakano, Ryosuke Miura. Countermeasure and Analysis of Bicycle Disc Brake Squeal, Dynamics and Design Conference 2007, 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 528, Sept. 2007.
• Yutaka Nakano, Eiji Kondo, Kenji Shimana. エンドミル加工におけるびびり振動発生限界の実験的考察, Dynamics and Design Conference 2007, Dynamics and Design Conference 2007 (CD-ROM論文集), No. 719, Sept. 2007.
• Eiji Kondo, Yutaka Nakano, Kenji Shimana, Norio Kawagoishi. 主軸頭の振動測定による切削過程の動的安定性の監視（主軸頭の振動による切削点でのエンドミルの振動推定）, 2006年度精密工学会秋季大会学術講演会, # D.61, Sept. 2006.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu, Daisuke Kawahara. 自動車用ディスクブレーキの動吸振器による鳴き抑制, Dynamics and Design Conference 2006, Dynamics and Design Conference 2006 (CD-ROM論文集), Aug. 2006.
• Takashi Nakae, Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu, TOSHIAKI ORII. 自転車用ディスクブレーキの鳴き現象の解明と解析, Dynamics and Design Conference 2006, 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 132, Aug. 2006.
• Daisuke Kawahara, Atsuo Sueoka, Takahiro Ryu, Yutaka Nakano, Daisuke Shido. 自動車用対向型ディスクブレーキの鳴き抑制対策, Dynamics and Design Conference 2005, 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 206, Aug. 2005.
• Takumi Inoue, Atsuo Sueoka, TAKESHI MAEHARA, Yutaka Nakano, HIROYUKI KANEMOTO. 高速増殖炉ヘリカル伝熱管探傷プローブの振動とセンサノイズ（振動の数値的再現）, Dynamics and Design Conference 2005, 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 208, Aug. 2005.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu, HIDEYO IEFUJI, TOSHIAKI ORII. 自転車用ディスクブレーキの動吸振器による鳴き抑制, Dynamics and Design Conference 2005, Dynamics and Design Conference 2005 (CD-ROM論文集), No. 204, Aug. 2005.
• Yutaka Nakano, Takumi Inoue, Atsuo Sueoka, YUKITAKA MURAKAMI. 原子力発電所蒸発管内探傷ケーブルに発生する摩擦振動（モックアップによる実験結果）, Dynamics and Design Conference 2004, Dynamics and Design Conference 2004 (CD-ROM論文集), No. 616, Sept. 2004.
• Takumi Inoue, Yutaka Nakano, Atsuo Sueoka, YUKITAKA MURAKAMI. 原子力発電所蒸発管内探傷ケーブルに発生する摩擦振動（数値シミュレーション）, Dynamics and Design Conference 2004, Dynamics and Design Conference 2004 CD-ROM講演論文集, No. 617, Sept. 2004.
• HIDEYO IEFUJI, Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu. 自転車用ディスクブレーキの鳴き現象の解明, Dynamics and Design Conference 2004, 日本機械学会機械力学・計測制御講演論文CD-ROM講演論文集, 日本機械学会機械力学・計測制御部門, No. 613, Sept. 2004.
• Yutaka Nakano, Atsuo Sueoka, Takahiro Ryu. 自動車用対向型ディスクブレーキの鳴きとその対策, Dynamics and Design Conference 2003, Dynamics and Design Conference 2003 (CD-ROM論文集), No. 426, Sept. 2003.
• Atsuo Sueoka, Takahiro Ryu, ATSUHIRO EMURA, Yutaka Nakano. 自転車用ディスクブレーキの鳴き・ビビリ現象に関する実験的研究, 第52回理論応用力学講演会, 第52回理論応用力学講演会 講演論文集 No.2003314, No. 426, Jan. 2003.

Patent

• Yutaka Nakano. 動吸振器. Patent. Published. 国立大学法人東京工業大学. 2013/06/26. 特願2013-133237. 2015/01/15. 特開2015-007458. 2015.

Degree

• 自動車および自転車用ディスクブレーキの鳴きとその対策,  Thesis,  Doctor of Engineering,  Kyushu University,  2006/03/--, 

[ Save as BibTeX ]    [ Paper, Presentations, Books, Others, Degrees: Save as CSV ]    [ Patents: Save as CSV ]