|
田中智久 2013年 研究業績一覧 (10件 / 251件)
論文
国際会議発表 (査読有り)
-
Jiang ZHU,
Saori MUTO,
Tomohisa Tanaka,
Yoshio SAITO.
Development of Automatic Machining Process Deciding System Based on 3D-Model,
The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
pp. 123-128,
Nov. 2013.
-
Tomohisa Tanaka,
Shinya Oishi,
Jiang Zhu,
Yoshio Saito.
Study on the Laser Forming of Thin Stainless-steel Wire,
the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology,
Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology,
Nov. 2013.
-
Xu Zhou,
Tomohisa Tanaka,
Jiang Zhu,
Yoshio Saito.
Titanium Coloring Mechanism through Laser Irradiation,
the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology,
Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology,
Nov. 2013.
国内会議発表 (査読なし・不明)
-
原幹也,
朱疆,
田中智久,
齋藤義夫.
切削条件がPTFEの加工面性状に与える影響に関する研究,
ABTEC2013砥粒加工学会学術講演会,
ABTEC2013砥粒加工学会学術講演会講演論文集,
砥粒加工学会,
pp. 214-216,
Aug. 2013.
-
武藤沙織,
朱疆,
田中智久,
齋藤義夫.
三次元形状モデルからの加工工程自動決定システムの開発,
2013年度精密工学会春季大会,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013,
社団法人精密工学会,
pp. 1073-1074,
Mar. 2013.
-
大石真也,
田中智久,
朱疆,
齋藤義夫.
ステンレス線材へのレーザフォーミングの適用,
日本機械学会生産システム部門研究発表講演会2013,
日本機械学会生産システム部門研究発表講演会2013講演論文集,
日本機械学会,
No. 13-6,
pp. 69-70,
Mar. 2013.
-
穂積昭充,
朱疆,
田中智久,
齋藤義夫.
NURBS曲面の分割による高効率加工パスの生成,
2013年度精密工学会春季大会,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013,
社団法人精密工学会,
pp. 1065-1066,
Mar. 2013.
-
長谷川将臣,
朱疆,
田中智久,
齋藤義夫.
多分解能メッシュによる多軸加工機の粗加工の効率化,
2013年度精密工学会春季大会,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2013,
社団法人精密工学会,
pp. 55-56,
Mar. 2013.
-
Osama Abdelaal,
Jiang Zhu,
Tomohisa Tanaka,
Saied Darwish,
Yoshio Saito.
Additive Manufacturing of Custom-made Hip Implants,
The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013,
Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013,
The Japan Society of Mechanical Engineers,
No. 13-6,
pp. 91-92,
Mar. 2013.
[ BibTeX 形式で保存 ]
[ 論文・著書をCSV形式で保存
]
[ 特許をCSV形式で保存
]
|