Journal Paper

• Muslimin, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA, Yoshio SAITO. Study on plane feature extraction in registration of laser scanning data sets for reverse engineering, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 9, No. 5, pp. 1-14, Dec. 2015.
• Tomohisa Tanaka, Shinya Oishi, Jiang Zhu, Yoshio Saito. Study on the mechanism of laser forming to the thin stainless-steel wire, International Journal of Nanomanufacturing, Inderscience Enterprises Ltd., Vol. 11, No. 3/4, pp. 219-236, Nov. 2015.  Official location  
• Jiang ZHU, Masato KATO, Tomohisa TANAKA, Hayato YOSHIOKA, Yoshio SAITO. Graph based automatic process planning system for multi-tasking machine, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 9, No. 3, Aug. 2015.  Official location  
• Yasunori SAKAI, Tomohisa TANAKA, Hayato YOSHIOKA, Jiang ZHU, Masaomi TSUTSUMI, Yoshio SAITO. Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 9, No. 1, pp. 1-15, Jan. 2015.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 1017, pp. 281-286, Sept. 2014.  Official location  
• Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 1017, pp. 141-146, Sept. 2014.  Official location  
• Yuanrui Zhang, Shigenobu Nagase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Positioning calibration of a parallel mechanism worktable with 6-DOF, Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 625, pp. 392-397, Aug. 2014.  Official location  
• JIANG Zhu, AKIMITSU Hozumi, TOMOHISA Tanaka, Yoshio Saito. High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision, Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 625, pp. 372-377, Aug. 2014.  Official location  
• Ahmad, N., Tanaka, T., YOSHIO SAITO. Machining parameter optimisation by genetic algorithm and artificial neural network, International Journal of Data Analysis Techniques and Strategies, Vol. 6, No. 3, pp. 261-274, 2014.
• Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable, Key Egineering Materials (Emerging Technology in Precision Engineering XIV), Trans Tech Publications Ltd, Vol. 523-524, pp. 463-468, Nov. 2012.  Official location  
• Kohei Ogura, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA, Key Engineering Materials, Trans Tech Publications, Vol. 516, pp. 192-197, June 2012.  Official location  
• Shunsuke Oike, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Robust Production Scheduling Using Autonomous Distributed Systems, Key Engineering Materials, Trans Tech Publications, Vol. 516, pp. 166-169, June 2012.  Official location  
• Xiaoyi Wang, Jing Chen, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka. Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm, Advanced Materials Research, Trans Tech Publications, Vol. 472-475, pp. 317-322, Feb. 2012.
• Jiang Zhu, Tomohisa TANAKA, Yoshio SAITO, Ryuta TANABE, Masaaki TAKENAKA, Toru FUKAMI. On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 5, No. 4, pp. 240-251, Oct. 2011.  Official location  
• Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka, Yoshio Saito. 3D Model Registration Based on Feature Extraction, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 299-300, pp. 1091-1094, July 2011.  Official location  
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Lining Sun. Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation, International Journal of Design Engineering, Inderscience Enterprises Ltd., Vol. 3, No. 3, pp. 218-231, Apr. 2011.  Official location  
• Tomohisa Tanaka, Ryo Suzuki, Jiang Zhu, Yoshio Saito. Excimer Laser 3D Machining Based on Irradiation Pulse Number Control, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 4, No. 5, pp. 1033-1043, Sept. 2010.  Official location  
• Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Manufacturing Feature Extraction of CAD Models for Machining, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 287-291, July 2010.  Official location  
• TOMOHISA TANAKA, Masahiro Komori, JIANG ZHU, YOSHIO SAITO. Development of Flexible Worktable for Endmilling Based on Parallel Mechanism, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 826-830, July 2010.  Official location  
• JIANG ZHU, Keisuke Nomura, TOMOHISA TANAKA, YOSHIO SAITO. Tool Path Planning Assist System for Freeform Surface Machining, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 321-325, July 2010.  Official location  
• JIANG ZHU, Ryo Suzuki, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 2, No. 4, pp. 812-823, Aug. 2008.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 1, No. 5, pp. 628-639, Nov. 2007.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Multi-resolution mesh for sculptured surface machining, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 1, pp. 69-80, Jan. 2007.
• 田中智久, 齋藤義夫. 発泡スチロールの熱線加工メカニズム(熱線停止時の加工特性), 日本機械学会論文集（C), Vol. 72, No. 722, pp. 3383-3389, Oct. 2006.
• Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito. An 8-Axis Robot Based Rough Cutting System for Surface Sculpturing, Proc. The 11th International Conference on Precision Engineering (ICPE), pp. 134-144, Aug. 2006.
• Nafis Ahmad, Ryo Wakabayashi, Tomohisa Tanaka, Yoshio Saito. Experimental Analysis and Optimization of Cutting Parameters for End Milling Aluminium Alloy, Proc. The 11th International Conference on Precision Engineering (ICPE), pp. 347-348, Aug. 2006.
• 田中智久, 飯田喜洋, 齋藤義夫. 環境対応型工作機械用MQLオイルミストセンサシステムの試作, 日本機械学会論文集(C), Vol. 72, No. 715, pp. 934-940, June 2006.
• Nafis AHMAD, Tomohisa TANAKA, Yoshio SAITO. Cutting Parameters Optimization and Constraints Investigation for Turning Process by GA with Self-Organizing Adaptive Penalty Strategy, JSME International Journal Series C, Vol. 49, No. 2, pp. 293-300, Apr. 2006.
• J.Zhu, T.Tanaka, Y.Saito. 3D Mesh Simplification for Freeform Surface, Tehran International Congress on Manufacturing Engineering (TICME2005), pp. Code1180, Dec. 2005.
• Nafis Ahmad, Tomohisa Tanaka, Yoshio Saito. Optimization of Cutting Parameters for End Milling Operation by SOAP based Genetic Algorithm, International Conference on Mechanical Engineering, pp. ICME05-AM-08, Dec. 2005.
• Nafis Ahmad, Tomohisa Tanaka, Yoshio Saito. Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy, Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, pp. 319-324, Oct. 2005.
• Javad AKBARI, Shinzo ENOMOTO, Kazuhiko KATO, Yoshiyuki YAKABE, Tomohisa TANAKA, Yoshio SAITO. An Experimental Investigation on EDM Process Using a Desktop Machine Tool, Proceedings of ICoPE2003/2004, Proceedings of ICoPE2003/2004, pp. 484-490, Mar. 2004.
• YOSHIO SAITO. Using Ultrasound for Measuring Grasping Force of Robot Soft Finger, JSME International Journal, Series C, Vol. 47, No. 1, pp. 175-179, Jan. 2004.
• J. Akbari, M.Imamura, T. Tanaka, Y. Saito. Ultrasonic Tactile Sensor for Robot Gripper, International Conference on Leading Edge Manufacturing in 21st Century, pp. 351-356, 2003.
• Takashi Sugie, Tomohisa Tanaka, Javad Akbari, Yoshio Saito. An Approximation of Free-Formed Surface for NC Machining, International Conference on Leading Edge Manufacturing in 21st Century, pp. 457-460, 2003.
• Javad Akbari, Eiji Utada, Tomohisa Tanaka, Yoshio Saito. Sensor Integrated Locator for Intelligent Fixture, Proceeding of 6th International Conference on Mechatronics Technology, pp. 283-287, 2002.
• Javad Akbari, Keigo Oyamada, Yoshio Saito. LCA of Machine Tools with Regard to their Secondary Effects on Quality of Machined Parts, Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, pp. 347-352, 2001.
• 稲場千佳郎, 小田切拓哉, 斎藤義夫, 伊東 誼. Remedies for Thermal Deformation of Two-Layered Spindle for System Machine Tools, Transactions of the Japan society of Mechanical Engineers, Vol. 66, No. 648, pp. 2864-2870, 2000.
• 稲場千佳郎, 山中 暁, 斎藤義夫, 伊東 誼. Measuring Rotational Motion of Sphere Supported by Air Flow, Transactions of the Japan society of Mechanical Engineers, Vol. 66, No. 641, pp. 339-345, 2000.
• 稲場千佳郎, 朝永 祐, 伊東 誼, 斎藤義夫. Estimation of Contact Pressure between Bearing and Bearing Housing by Means of Ultrasonic Waves, Transactions of the Japan society of Mechanical Engineers, Vol. 66, No. 645, pp. 1674-1680, 2000.
• YOSHIO SAITO. Machine Tool Engineering for Environmental Awareness, Journal of the Society of Grinding Engineers, Vol. 43, No. 1, pp. 5-9, 1999.
• 沈 英謀, 津村幸治, 吉田嘉太郎, 斎藤義夫. 3D Recognition from Shading and B-Spline Surface Approximation (3rd Report, Control Points Arrangements and Recognition Efficiency), Transaction of the Japan Society of Mechanical Engineers, Vol. 65, No. 630, pp. 829-836, 1999.
• 稲場千佳郎, 伊東 誼, 斎藤義夫, 野尻 恭. A Proposal of Non-Contact-and Driving-Type Painting Method of Sphere, Transaction of the Japan Society of Mechanical Engineers, Vol. 64, No. 627, pp. 4525, 1998.
• 沈 英謀, 藤村 誠, 津村幸治, 斎藤義夫, 吉田嘉太郎. 3D Recognition from Shading and B-Spline Surface Approximation, Transations of the Japan Society of Mechanical Enginoers, Vol. 64, No. 621, pp. 1860, 1998.
• 津村幸治, 村田修一, 齋藤義夫. Analysis of System Spaces by Gradient Flows, Transactions of the Society of Instrument and Control Engineering, Vol. 34, No. 7, pp. 775, 1998.
• 津村幸治, 齋藤義夫. Multiobjective Continuous Time Deadbeat Control, Transactions of the Institute of Systems, Control and Information Enjineers, Vol. 11, No. 12, pp. 647-656, 1998.
• 沈 英謀, 藤村 誠, 津村幸治, 斎藤義夫, 吉田嘉太郎. 3D Recognition from Shading and B-Spline Surface Approximation (2nd Report, 3D Recognition from Shading and Stereo Vision), Transaction of the Japan Society of Mechanical Engineers, Vol. 64, No. 624, pp. 3230-3237, 1998.
• 樋口静一, 戸塚貴之, 斎藤義夫. The Formation of Pattern Traces of Coated Abrasives on Cylindrical Workpiece Surfaces, Journal of the Society of Grinding Engineers, Vol. 42, No. 2, pp. 75-81, 1998.
• 津村幸治, 伊藤 晃, 齋藤義夫. Identification Errors and Uncertainties of Systems, Transaction of Society of Instrument and Control Engineering, Vol. 34, No. 7, pp. 755-760, 1998.
• 津村幸治, 森田 洋, 齋藤義夫. Deadbeat Control of Continuous Time H∞ Control System, Transaction of Society of Instrument and Control Engineering, Vol. 34, No. 1, pp. 13-19, 1998.

Book

• YOSHIO SAITO, 山崎 一男. 株式会社光陽社, 砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers, 砥粒加工学会, Vol. 57, No. 9, pp. 561-564, Sept. 2013.
• YOSHIO SAITO, 福島 洋一. 企業トップに聞く!, 砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers, 砥粒加工学会, Vol. 57, No. 7, pp. 415-418, July 2013.
• YOSHIO SAITO, 黒田 浩史. 企業トップに聞く!, 砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers, 砥粒加工学会, Vol. 57, No. 5, pp. 299-302, May 2013.
• 斎藤義夫分担, 日本機械学会編. JSME Mechanical Engineers' Handbook Design β7:Manufacturing System, 丸善株式会社, pp. 76-79, July 2005.
• YOSHIO SAITO. 精密工作便覧, コロナ社, コロナ社, 1992.
• YOSHIO SAITO. やさしい生産加工技術, 工業調査会, 工業調査会, 1992.
• YOSHIO SAITO. 潤滑ハンドブック, 養賢堂, 養賢堂, 1987.

International Conference (Reviewed)

• Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part, The 8th International Conference on Leading Edge Manufacturing in 21st Century, Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century, the Japan Society of Mechanical Engineers, Oct. 2015.
• Tomohisa Tanaka, Syo Harada, Jiang Zhu, Hayato Yoshioka, Yoshio Saito. Fundamental Study for Control of Hue and Brightness in the Laser Coloring, The 8th International Conference on Leading Edge Manufacturing in 21st Century, Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century, the Japan Society of Mechanical Engineers, Oct. 2015.
• Jiang Zhu, Masato Kato, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine, The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Asian Society for Precision Engineering and Nanotechnology(ASPEN), Sept. 2015.
• Yasunori SAKAI, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito. Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway, MECHATRONICS 2014, Proceedings of MECHATRONICS 2014, No. OS-000671, Nov. 2014.
• Xu Zhou, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Titanium Coloring Mechanism through Laser Irradiation, the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2013.
• Tomohisa Tanaka, Shinya Oishi, Jiang Zhu, Yoshio Saito. Study on the Laser Forming of Thin Stainless-steel Wire, the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2013.
• Jiang ZHU, Saori MUTO, Tomohisa Tanaka, Yoshio SAITO. Development of Automatic Machining Process Deciding System Based on 3D-Model, The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), pp. 123-128, Nov. 2013.
• Xu Zhou, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on the Structural Color Appearance of Titanium by Laser Irradiation, the 15th International Machine Tool Engineers` Conference, Proceeding of the 15th International Machine Tool Engineers` Conference, pp. 8-9, Nov. 2012.
• Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table, the 15th International Machine Tool Engineers` Conference, Proceeding of the 15th International Machine Tool Engineers` Conference, Japan Machine Tool Builders` Association, pp. 6-7, Nov. 2012.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model, The 2nd IFToMM Asian Conference on Mechanism and Machine Science, 2012.
• Jiang Zhu, Yusuke Narabu, Tomohisa Tanaka, Yoshio Saito. Manufacturing Feature Extraction System of 3D-Model for Process Planning, The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), Nov. 2011.
• Takahiro Kubo, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region, The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), Nov. 2011.
• Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu. Generating the Measurement Points Based on Finishing NC Data, 2011 IEEE International Conference on Mechatronics (ICM), Proceeding of 2011 IEEE International Conference on Mechatronics (ICM), pp. 34-38, Apr. 2011.
• Jiang Zhu, Akira Yanagisawa, Tomohisa Tanaka, Yoshio Saito. Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT), The 6th International Conference on MicroManufacturing ICOMM/2011, Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011, Tokyo Denki University, pp. 149-156, Mar. 2011.
• Jiang Zhu, Keisuke Nomura, Tomohisa Tanaka, Yoshio Saito. Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh, The 14th International Conference on Mechatronics Technology, Proceeding of the 14th International Conference on Mechatronics Technology, pp. 12-16, Nov. 2010.
• Jiang Zhu, Ryota Tanabe, Tomohisa Tanaka, Yoshio Saito. Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 133-138, Dec. 2009.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Excimer Laser 3D Machining Based on Irradiation Pulse Number Control, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 581-584, Dec. 2009.
• Xiaoyi Wang, Quanxian Wang, Yoshio Saito, Jiang Zhu, Tomohisa Tanaka. Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 21-26, Dec. 2009.
• Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool Path Generation Method for Freeform Surface Machining, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 3-8, Dec. 2009.
• Masahiro Komori, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, CD Proceeding, 2A1-4, Nov. 2009.
• Yusuke Narabu, Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, CD Proceeding, 1A1-13, Nov. 2009.
• Tomohisa TANAKA, Bruno LEBAN, Takahiro KUBO, Yoshio SAITO, Massimiliano PAU, Hua CHEN, Makoto ISHIDA. Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces, 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, pp. 115-120, Sept. 2009.
• Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement and machining using polar coordiante desktop machine tool, the 13th International Machine Tool Engineers' Conference, Proceedings of the 13th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 72-73, Nov. 2008.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Freeform surface sculpturing and measurement system based on 8-axis robot system, the 13th International Machine Tool Engineers' Conference, Proceedings of the 13th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 70-71, Nov. 2008.
• JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO, Lining Sun. Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation, 13th Internation Conference on Machine Design and Production, Proceeding of the 13th Internation Conference on Machine Design and Production, pp. 171-186, Sept. 2008.
• Shunsuke Oike, TOMOHISA TANAKA, YOSHIO SAITO. Flexible Manufacturing Scheduling, 13th Internation Conference on Machine Design and Production, Proceeding of the 13th Internation Conference on Machine Design and Production, pp. 759-768, Sept. 2008.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 8-axis Surface Sculpturing System by Heated Cutting Tools, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), pp. 1484-1484, Mar. 2008.
• Guanglei Liu, Tomohisa Tanaka, Yoshio Saito. A Study on Miniature Automatic Tool Changer for Desktop Machine Tool, 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), No. 07-205, pp. 799-802, Dec. 2007.
• Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito. Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System, The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21, Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21, pp. 125-130, Nov. 2007.
• Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito. A Surface Sculpturing System Based on 8-Axis Robot, International Conference on Advanced Design & Manufacturing, ICADM-2007, Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007, pp. 421-427, Aug. 2007.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Rough machining process and its simulation for robot integraged surface sculpturing system, the 4th IASTED International Conference on Circuits, Signals, and Systems, Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems, pp. 368-373, Nov. 2006.
• Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito. An 8-axis robot based rough cutting system for surface sculpturing, 11th International Conference on Precision Engineering (11th ICPE), Towards Synthesis of Micro-/Nano-systems, Springer, pp. 139-144, Aug. 2006.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 3D mesh simplification for freeform surfacing, Tehran International Congress on Manufacturing Engineering (TICME2005), CD Proceeding, Dec. 2005.

Domestic Conference (Reviewed)

• Ahmad, N., Tanaka, T., YOSHIO SAITO. Optimization of multipass turning parameters by genetic algorithm, Advanced Materials Research, Vol. 264-265, pp. 1545-1550, 2011.
• Yuichi Takekuma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Mold Casting of Ceramics, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 367-368, Sept. 2009.
• Masahiro Komori, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu. Development of Work Table with 6-DOF Parallel Mechanism for Machine Tools, Abrasive Technoloogy Conference 2009, Abrasive Technoloogy Conference 2009, The Japan Society for Abrasive Technology, pp. 167‐168, Sept. 2009.
• Xiaoyi Wang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A New Assembly Model Capable of Reorganizing Assembly Structure, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 523‐524, Sept. 2009.
• Takahiro Kubo, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on the accuracy improvement of real contact part distinction for the rough surface, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 733-734, Sept. 2009.
• Jun Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Compact Machine Tool with Working Space in Shell, Mechanical Engineering Congress 2009, Proceeding of Mechanical Engineering Congress 2009, The Japan Society of Mechanical Engineers, Vol. 4, No. 09-1, pp. 233-234, Sept. 2009.
• Yusuke Narabu, Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface, Mechanical Engineering Congress 2009, Proceeding of Mechanical Engineering Congress 2009, The Japan Society of Mechanical Engineers, Vol. 4, No. 09-1, pp. 281-282, Sept. 2009.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Free-form Surface Machining of Polymeric Material Based on Laser Ablation with Irradiation Pulse Number Control, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 931-932, Mar. 2009.
• Ryota Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement and machining of 3D shape by using polar coordiante desktop machine tool, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 519-520, Mar. 2009.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Non-contact 3-D Measurement Path Generation for Multi-axis Robot System, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 491-192, Mar. 2009.
• Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Machining Using Polar Coordinate Desktop Machine Tool, Autumn Annual Meeting of the Japan Society for Procession Engineering, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 137-138, Sept. 2008.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Non-contact Three Dimensional Measurement Using Multi-axis Robot System, Autumn Annual Meeting of the Japan Society for Procession Engineering, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 241-242, Sept. 2008.

International Conference (Not reviewed / Unknown)

• yuanrui zhang, JIANG ZHU, Hayato Yoshioka, YOSHIO SAITO, TOMOHISA TANAKA. Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable, the 16th International Machine Tool Engineers` Conference, Proceeding of the 16th International Machine Tool Engineers` Conference, Japan Machine Tool Builders' Association, Nov. 2014.
• Yasunori Sakai, JIANG ZHU, TOMOHISA TANAKA, Hayato Yoshioka, YOSHIO SAITO. Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction, the 16th International Machine Tool Engineers` Conference, Proceeding of the 16th International Machine Tool Engineers` Conference, Japan Machine Tool Builders' Association, Nov. 2014.
• Shota Sekiguchi, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Freeform Surface Machining and Measurement by 8-axis Robot System, The 14th International Machine Tool Engineers' Conference, Proceedings of the 14th International Machine Tool Egineers' Conference, Japan Machine Tool Builders' Association, pp. 80-81, Oct. 2010.
• Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation Method for Freeform Surface Machining, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), Mar. 2008.
• Ryo Tanabe, Yoshio Saito, Tomohisa Tanaka. Measurement and Machining by using Polar Coordinate Desktop Machine Tool, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), Mar. 2008.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 8-axis robot integrated surface sculpturing system, New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference, New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference, pp. 40-41, Nov. 2006.
• Tomohisa Tanaka, Masahiro Ashizuka, Yoshio Saito, Tsunamitsu Nakahara. Study on The Contact Characteristics of Truncated Surfaces, Proc. The 3rd Asia International Conference on Tribology, pp. 43-44, Sept. 2006.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A new mesh simplification algorithm for the application of surface sculpturing, The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics, Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics, CD Proceeding, Sept. 2005.
• 芦塚正博, 田中智久, Akbari Javad, 斎藤義夫. 画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 548, 2002.
• 吉柳一郎, 田中智久, Akbari Javad, 斎藤義夫. 多軸ロボットによる自由曲面生成アルゴリズムの構築, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 51, 2002.

Domestic Conference (Not reviewed / Unknown)

• Jiang Zhu, Yoshio Saito. Research on the Machining Characteristic of ABS Resin and the Possibility of Hybrid Manufacturing Method Combining Additive Manufacturing and Machining, 日本設計工学会2015年度春季大会研究発表講演会, 日本設計工学会2015年度春季大会研究発表講演会講演論文集, 公益社団法人 日本設計工学会, pp. 51-52, May 2015.
• Sho Harada, JIANG ZHU, TOMOHISA TANAKA, Hayato Yoshioka, YOSHIO SAITO. Research on Titanium Coloring using Laser Irradiation -Improvement repeatability in coloring marking and realization of wide color space, JSME Manufacturing Systems Division Conference 2015, Proceesing of JSME Manufacturing Systems Division Conference 2015, The Japan Society of Mechanical Engineers, No. 15-8, pp. 109-110, Mar. 2015.
• Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1101-1102, Mar. 2015.
• Saurabh Bhide, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1099-1100, Mar. 2015.
• Mikiya Hara, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Study on Effect of Cutting Parameter on Accuracy of Surface in the Milling of Polytetrafluoroethylene, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1039-1040, Mar. 2015.
• Masato Kato, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Graph based automatic process planning system for multi-tasking machine, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 773-774, Mar. 2015.
• Shigenobu Nagase, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Efficiency of the free-form surface machining with optimum tool-path for each segment, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 771-772, Mar. 2015.
• Yasunori Sakai, Hayato Yoshioka, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka. Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 351-352, Mar. 2015.
• Huiwei Gao, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Construction of Flexible Production Scheduling System Using Autonomous Distributed Systems, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 267-268, Mar. 2015.
• Yasunori Sakai, JIANG ZHU, 田中智久, Hayato Yoshioka, YOSHIO SAITO. Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway, 第10回 日本機械学会生産加工・工作機械部門講演会, pp. 97-98, Nov. 2014.
• Mikiya HARA, Jiang ZHU, Tomohisa TANAKA, Yoshio SAITO. Study on Effect of Cutting Parameter on Cutting Resistance in the Milling of Polytetrafluoroethylene, ２０１４年度砥粒加工学会学術講演会, ２０１４年度砥粒加工学会学術講演会論文集, 公益社団法人 砥粒加工学会, Sept. 2014.
• Naoki Maeda, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Fabrication of three-dimensional laminate of thin metal wire using a laser, 日本機械学会生産システム部門研究発表講演会2014, 日本機械学会生産システム部門研究発表講演会2014講演論文集, 日本機械学会, No. 14-8, pp. 107-108, Mar. 2014.
• Yuki Koike, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 3D Model Registration Based on Feature Extraction Using Segmentation, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Yasunori Sakai, Toshiki Hanaoka, JIANG ZHU, YOSHIO SAITO, TOMOHISA TANAKA. 加振力振幅が直動転がり案内の動特性に及ぼす影響, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Shinya Oishi, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Study on Laser Forming Mechanism of Stainless Wire, 日本機械学会生産システム部門研究発表講演会2014, 日本機械学会生産システム部門研究発表講演会2014講演論文集, 日本機械学会, No. 14-8, pp. 105-106, Mar. 2014.
• NOBUYUKI IWATSUKI, YOSHIO SAITO, TAKUSHI SAITO. 機械設計教育と連動した創造性育成科目（東京工業大学工学部機械知能システム学科「機械知能システム創造」について）, Designシンポジウム2014, Designシンポジウム2014USB講演論文集, 日本設計工学会, pp. 1-4, 2014.
• Mikiya Hara, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Effect of Cutting Parameter on Surface Roughness in the Milling of Polytetrafluoroethylene, ABTEC2013砥粒加工学会学術講演会, ABTEC2013砥粒加工学会学術講演会講演論文集, 砥粒加工学会, pp. 214-216, Aug. 2013.
• Masaomi Hasegawa, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Validation of Rough Machining Process for Multi-axis Machine Tools by Using Multi-resolution Mesh, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 55-56, Mar. 2013.
• Akimitsu Hozumi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. High Efficiency Tool Path Generation Method for NURBS Surface Machining Based on NURBS Surface Subdivision, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 1065-1066, Mar. 2013.
• Saori Muto, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of the Automatic Machining Process Deciding System Based on 3D-model, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 1073-1074, Mar. 2013.
• Osama Abdelaal, Jiang Zhu, Tomohisa Tanaka, Saied Darwish, Yoshio Saito. Additive Manufacturing of Custom-made Hip Implants, The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, The Japan Society of Mechanical Engineers, No. 13-6, pp. 91-92, Mar. 2013.
• Shinya Oishi, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Study on Laser Forming for Stainless Wire, The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, The Japan Society of Mechanical Engineers, No. 13-6, pp. 69-70, Mar. 2013.
• Jiang Zhu, Jumpei Goto, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation for Layered Manufacturing by Wire Electric Discharge Machining (WEDM), The 9th Manufacturing & Machine Tool Conference, Proceeding of the 9th Manufacturing & Machine Tool Conference, 日本機械学会, No. 12-10, pp. 103-104, Oct. 2012.
• Xu Zhou, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Coloring Mechanism of Oxide Layers on Titanium by Laser Irradiating, The 9th Manufacturing & Machine Tool Conference, Proceeding of the 9th Manufacturing & Machine Tool Conference, 日本機械学会, No. 12-10, pp. 275-276, Oct. 2012.
• Haruka Tsukasaki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on molten laminating of the metal resin combined molding using the laser, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 15-16, Mar. 2012.
• Yuanrui Zhang, Jiaotao Wu, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Analysis of error factors in the worktable of 6-DOF parallel mechanism, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 843-844, Mar. 2012.
• Shota Sekiguchi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Processing System Construction for 8-axis Redundant Robot, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 675-676, Mar. 2012.
• Yuya Iitsuka, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on modeling of wire structures by laser forming, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 05-06, Mar. 2012.
• Masaomi Hasegawa, Jiang Zhu, TOMOHISA TANAKA, YOSHIO SAITO. Validation of rough machining process for turning center by using multi-resolution mesh, JSME Manufacturing Systems Division Conference 2012, Proceding of JSME Manufacturing Systems Division Conference 2012, The Japan Society of Mechanical Engineers, No. 12-7, pp. 29-30, Mar. 2012.
• Shota Sekiguchi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Toolpath Generation for 3D Processing by 8-axis Redundant Robot System, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Shunsuke Oike, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Robust Production Scheduling Using Autonomous Distributed Systems, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Shinya Kinoshita, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on Appearance of Structural Color by Laser Irradiation to Titanium, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Taku Nishio, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Fundamental Research to Construct the Model Made from Heterogeneous Materials by Using Laser, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Akimitsu Hozumi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of Processing Support System for 6-axis WEDM, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Haruka Tsukasaki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of the Support-free RP Device with 5-axis Control, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Saori Muto, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Fabrication and Evaluation of 3D Shape by Rapid Prototyping, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Yuya Iitsuka, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Wire Structure Forming by Laser Forming, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Kohei Ogura, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Characteristics of excimer laser ablation for three dimensional machining of PMMA, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 125-126, Mar. 2011.
• Yuichi Takekuma, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Construction of shape inspection system by comparing three-dimensional models, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 665-666, Mar. 2011.
• Yusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Development of the automatic machining method deciding system based on 3D-model, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 577-578, Mar. 2011.
• Shunsuke Oike, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Robust Production Scheduling Using Autonomous Distributed Systems, JSME Manufacturing Systems Division Conference 2011, Proceding of JSME Manufacturing Systems Division Conference 2011, The Japan Society of Mechanical Engineers, No. 11-7, pp. 85-86, Mar. 2011.
• Takahiro Kubo, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. High load wear-out evaluation of characteristics by direct contact point observation in rough contact area, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 759-760, Mar. 2011.
• Kengo Shintaku, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed, 生産と加工に関する学術講演会2010, Proceeding of the 8th Manufacturing & Machine Tool Conference, 社団法人 日本機械学会, No. 10-11, pp. 243-244, Oct. 2010.
• Koji Nishiyama, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Tool Path Generation for 2.5-Axis Contour Machining, Autumn Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 403-404, Sept. 2010.
• Takahiro Kubo, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition, Abrasive Technoloogy Conference 2010, Proceeding of Abrasive Technoloogy Conference 2010, The Japan Society for Abrasive Technology, pp. 179-180, Aug. 2010.
• Keisuke Nomura, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. High-efficiency Processing for Turning Center by Using Multi-resolution Mesh, Spring Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 1037-1038, Mar. 2010.
• Masahiro Komori, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools, Spring Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 1039-1040, Mar. 2010.
• Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Manufacturing Feature Extraction of CAD Models for Machining, 日本機械学会北陸信越支部第47期総会・講演会, 日本機械学会北陸信越支部第47期総会・講演会講演論文集, 社団法人日本機械学会北陸信越支部, No. 107-1, pp. 409-410, Mar. 2010.
• Fei Feng, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Tool path generation for the 3D model`s machining by multi-axis processing system, JSME Manufacturing Systems Division Conference 2009, Proceeding of JSME Manufacturing Systems Division Conference 2009, The Japan Society of Mechanical Engineers, No. 09-5, pp. 19-20, Mar. 2009.
• JIANG ZHU, Zuanshi Haranud, TOMOHISA TANAKA, YOSHIO SAITO. Study on Feature Area Extraction for Freeform Surface Based on Mesh Simplification, the 7th Manufacturing & Machine Tool Conference, Proceeding of the 7th Manufacturing & Machine Tool Conference, The Japan Society of Mechanical Engineers, No. 08-19, pp. 263-264, Nov. 2008.
• Keisuke Nomura, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research of Improvement of 8-axis Processing System, Mechanical Engineering Congress, 2008 Japan (MECJ-08), Mechanical Engineering Congress, 2008 Japan (MECJ-08), The Japan Society of Mechanical Engineers, Vol. 4, No. 08-1, pp. 255-256, Aug. 2008.
• JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Rough Machining Model Generation for Freeform Surface Machining, JSME Manufacturing System Division Conference 2008, Proceeding of JSME Manufacturing System Division Conference 2008, The Japan Cociety of Mechanical Engineers, No. 08-13, pp. 57-58, July 2008.
• Zuanshi Haranud, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Study on Freeform Surface Tool Path Generation Method, JSME Manufacturing System Division Conference 2008, Proceeding of JSME Manufacturing System Division Conference 2008, The Japan Cociety of Mechanical Engineers, No. 08-13, pp. 59-60, July 2008.
• Atsushi KAWAMATA, Yoshio SAITO, Tomohisa TANAKA. Research on miniaturization of machine tool by unified structure, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 609-610, Mar. 2008.
• Kazuki HONDA, Yoshio SAITO, Tomohisa TANAKA. Molding process for CFRP using High-Frequency Induction Heating, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 1075-1076, Mar. 2008.
• Junichi HADA, Tomohisa TANAKA, Yoshio SAITO. Systematization of Combined Machining Process, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 879-880, Mar. 2008.
• Tomohisa Tanaka, Bruno Leban, Yoshio Saito, Hua Chen, Makoto Ishida. Characteristics of the Full Refl ection Contact Area Observation in Contactbetween Spherical Convexity and Flat Surface, JAST Tribology Conference Saga, Proceedings of JAST Tribology Conference Saga, September 2007, pp. 333-334, Oct. 2007.
• TOMOHISA TANAKA, YUICHIRO KIMURA, YOSHIO SAITO, TAKAYUKI KUMITA, YASUHIRO KOMAI. Study on Practical Implementation of the Honing Tools for Machining Centers, 2007年度砥粒加工学会学術講演会, 2007年度砥粒加工学会学術講演会講演論文集, pp. 89-90, Sept. 2007.
• Junichi Hada, TOMOHISA TANAKA, YOSHIO SAITO. Systematization of Machining Process for Pocket Shape Using CAM System, 2007年度 精密工学会秋季大会学術講演会 講演論文集, 2007年度 精密工学会秋季大会学術講演会, pp. 395-396, Sept. 2007.
• Atsushi Kawamata, YOSHIO SAITO, TOMOHISA TANAKA. Research on miniaturization of machine tool by unified structure, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 3-4, Sept. 2007.
• Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito. Study on constant scallop height tool path generation for freeform surface machining, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 73-74, Sept. 2007.
• Masahiro Komori, Yoshio Saito, Tomohisa Tanaka. Characteristic of Linear-Actuated Parallel Mechanism, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 31-32, Sept. 2007.
• Tomohisa TANAKA, Noriko TAKASHITA, Bruno LEBAN, Yoshio SAITO. Observation of the Real Contact Area in Sliding Contact between Primitive Bump and Flat Surface, 2007年度 砥粒加工学会学術講演会 講演論文集, pp. 103-104, Sept. 2007.
• Atsushi Kawamata, Yosio Saito, Tomohisa Tanaka. Effect of Spindle Through MQL on End Milling, 2007年度 砥粒加工学会学術講演会, 2007年度 砥粒加工学会学術講演会 講演論文集, pp. 191-192, July 2007.
• 竹中正彬, 田中智久, 齋藤義夫. 極座標型デスクトップマシンツールを用いた計測, 日本機械学会第6回生産加工･工作機械部門講演会講演論文集, pp. 225-226, Nov. 2006.
• 下河辺学, 田中智久, 齋藤義夫. CAMシステムを利用したポケット形状加工の体系化, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 91-92, Mar. 2006.
• 本田兼基, 田中智久, 齋藤義夫. MQL加工用ミストセンサの開発, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 305-306, Mar. 2006.
• 芦塚正博, 田中智久, 斎藤義夫. トランケーションが及ぼす接触特性への影響(第2報), 2006年度精密工学会春季大会学術講演会講演論文集, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 387-388, Mar. 2006.
• 飯田喜洋, 田中智久, 齋藤義夫. 多軸ロボットシステムによる形状計測と精度評価, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 1081-1082, Mar. 2006.
• 菅谷健二郎, 田中智久, 齋藤義夫. エキシマレーザ加工による高分子材料の3次元形状創成, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 1231-1232, Mar. 2006.
• 高下法子, 田中智久, 斎藤義夫. 弾性変形拡張方式によるホーニングツールの開発, 2005年度精密工学会春季大会学術講演会講演論文集, 2005年度精密工学会秋季大会学術講演会講演論文集, pp. 305-306, Sept. 2005.
• 菅谷健二郎, 田中智久, 斎藤義夫. 高分子材料へのエキシマレーザアブレーション加工に関する研究, 2005年度精密工学会春季大会学術講演会講演論文集, 2005年度精密工学会秋季大会学術講演会講演論文集, pp. 389-390, Sept. 2005.
• 原 雄太, 田中智久, 斎藤義夫. 工作機械の消費電力評価方法の構築, 2005年度精密工学会春季大会学術講演会講演論文集, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 743-744, Mar. 2005.
• 深見 徹, 田中智久, 斎藤義夫. 極座標型デスクトップマシンツールを用いた加工と計測, 2005年度精密工学会春季大会学術講演会講演論文集, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 697-698, Mar. 2005.
• 杉恵貴史, 田中智久, 斎藤義夫. 8軸制御曲面加工システムの構築とそのプログラミング, 2005年度精密工学会春季大会学術講演会講演論文集, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 939-940, Mar. 2005.
• 飯田喜洋, 田中智久, 齋藤義夫. ＭＱＬ加工用ミストセンサの開発, 2004年度精密工学会秋季大会学術講演会講演論文集, 2004年度精密工学会秋季大会学術講演会講演論文集, pp. 109, Sept. 2004.
• 歌田英司, 菅谷健二郎, 田中智久, Akbari Javad, 齋藤義夫. 発泡スチロールのエキシマレーザ加工に関する研究, 2004年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 995, Mar. 2004.
• 山田維祐, 大野竜太, 田中智久, Akbari Javad, 齋藤義夫. デスクトップ型工作機械用オートアライメント機構の開発, 2004年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 453, Mar. 2004.
• 高本尚志, 田中智久, Akbari Javad, 齋藤義夫. コンポジットめっきの超精密切削に関する研究, 2004年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 677, Mar. 2004.
• 福永悦史, 田中智久, Akbari Javad, 齋藤義夫. 超小型工作機械用高速主軸の開発とMQL加工への適用, 2004年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 83, Mar. 2004.
• YOSHIO SAITO. モノづくりから創成教育へ, 日本機械学会2004年度年次大会講演資料集(8), pp. 392-393, 2004.
• 深見徹, 田中智久, Akbari Javad, 斎藤義夫. 弾性変形拡張方式を利用したホーニングツールの開発, 2003年度精密工学会秋季大会学術講演会講演論文集, pp. 543, 2003.
• 坂谷内篤, 田中智久, Javad Akbari, 斎藤義夫. ロボットの把持動作に関する学習制御, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 206, 2002.
• 歌田英司, 田中智久, Javad Akbari, 斎藤義夫. 超音波接触判定センサを持つロケータの開発, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 337, 2002.
• 山中暁, 田中智久, Akbari Javad, 斎藤義夫. 環境対応型工作機械用ミストセンサの開発, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 63, 2002.
• 前田陽介, 田中智久, Akbari Javad, 斎藤義夫. 工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 14, 2002.
• 杉田芳史, 田中智久, Javad Akbari, 斎藤義夫. 自由曲面形状の創成と計測に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 257, 2002.
• 矢ヶ部善幸, 山田洋維祐, 田中智久, アキバリ ジャワド, 斎藤義夫. PC制御デスクトップマシンによる放電加工機, 日本機械学会第4回生産加工･工作機械部門講演会講演論文集, pp. 131, 2002.
• 小山田圭吾, 田中智久, Akbari Javad, 斎藤義夫. 工作機械の環境への2次的影響, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 144, 2002.
• 牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫. 発泡スチロールの熱線加工メカニズムに関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 662, 2002.
• 黄 士元, 田中智久, Akbari Javad, 斎藤義夫. 画像情報に基づく多面体形状の自動認識に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 248, 2002.
• 今村光広, 田中智久, Akbari Javad, 斎藤義夫. 超音波センサ組み込みソフトフィンガによる把持状態の検出, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 606, 2002.
• 牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫. 発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 488, 2002.
• 小野田達志, 斎藤義夫. 発泡スチロールの熱線による３Ｄラピッドプロトタイピング, 第２０回ラピッド・プロトタイピング　シンポジウム, pp. 71-74, 2001.

Other Publication

• YOSHIO SAITO. 工作機械の環境対応に関する規格, 精密工学会誌, 公益社団法人 精密工学会, Vol. 78, No. 7, pp. 573-576, 2012.
• Yoshio SAITO, Takushi SAITO, Seiichiro HARA. Monodukuri and Creative Education (Creative Projects for Mechanical and Intelligent Systems), 日本設計工学会誌, 日本設計工学会, Vol. 40, No. 11, pp. 568-573, Nov. 2005.
• 綱清一郎, 斎藤義夫. 超音波を用いた軸受部接触圧力の測定, 超音波テクノ, Vol. 13, No. 10, pp. 40-43, 2001.

Degree

• 被削材周辺条件と研削加工精度に関する研究,  Thesis,  Doctor of Engineering,  Tokyo Institute of Technology,  1984/03/31,   
• 研削油剤の潤滑効果に関する研究,  Master of Engineering,  Tokyo Institute of Technology,  1975/03/--, 

[ Save as BibTeX ]    [ Paper, Presentations, Books, Others, Degrees: Save as CSV ]    [ Patents: Save as CSV ]