Journal Paper

• Hibiki Yamazaki, Jiang Zhu, Tomohisa Tanaka. Study on the Surface Enhancement of Thin-Walled Metallic Materials Using a Novel Double-Side Burnishing Tool, International Journal of Automation Technology, Fuji Technology Press Ltd., Vol. 17, No. 5, pp. 458-468, Sept. 2023.
• JIANG ZHU, TOMOHISA TANAKA. Surface modification of magnesium alloy using a new developed burnishing tool with constant force control, Journal of the Japan Society for Abrasive Technology, 公益社団法人 砥粒加工学会, Vol. 66, No. 10, pp. 558-561, Oct. 2022.
• Yasunori Sakai, Ryo Kinouchi, Yuta Toki, Tomohisa Tanaka. Novel non-traditional mechanical drilling process with squeeze motion, Materials Letters, Vol. 285, 129444, Apr. 2021.
• Jiang Zhu, Da Xie, Tomohisa Tanaka. Recognition of Multi-Intersecting Features of Boundary Representation CAD Model, Journal of Physics: Conference Series, IOP Publishing, Vol. 1827, Mar. 2021.  Official location  
• Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka. A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface, Information, Vol. 23, No. 3, pp. 205-212, Sept. 2020.
• Shigeru Aoki, Yasunori Sakai, Tomohisa Tanaka. Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect), Information, Vol. 23, No. 1, pp. 25-32, Mar. 2020.
• Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Dinh Ngoc Pham. Investigation of Corrosion Resistance Enhancement for Biodegradable Magnesium Alloy by Ball Burnishing Process, International Journal of Automation Technology, Fuji Technology Press Ltd., Vol. 14, No. 2, pp. 175-183, Mar. 2020.
• Chenyao Cao, Jiang Zhu, Tomohisa Tanaka, Fang-Jung Shiou, Shunichi Sawada, Hayato Yoshioka. Ball Burnishing of Mg Alloy Using a Newly Developed Burnishing Tool with On-machine Force Control, International Journal of Automation Technology, Fuji Technology Press Ltd., Vol. 13, No. 5, pp. 619-630, Sept. 2019.
• Muslimin, Jiang ZHU, Hayato YOSHIOKA, Tomohisa TANAKA, Yoshio SAITO. Study on plane feature extraction in registration of laser scanning data sets for reverse engineering, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 9, No. 5, pp. 1-14, Dec. 2015.
• Tomohisa Tanaka, Shinya Oishi, Jiang Zhu, Yoshio Saito. Study on the mechanism of laser forming to the thin stainless-steel wire, International Journal of Nanomanufacturing, Inderscience Enterprises Ltd., Vol. 11, No. 3/4, pp. 219-236, Nov. 2015.  Official location  
• Jiang ZHU, Masato KATO, Tomohisa TANAKA, Hayato YOSHIOKA, Yoshio SAITO. Graph based automatic process planning system for multi-tasking machine, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 9, No. 3, Aug. 2015.  Official location  
• Yasunori SAKAI, Tomohisa TANAKA, Hayato YOSHIOKA, Jiang ZHU, Masaomi TSUTSUMI, Yoshio SAITO. Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 9, No. 1, pp. 1-15, Jan. 2015.
• Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Feature Extraction Based 3D Model Registration for Surface Finish Quality Evaluation, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 1017, pp. 141-146, Sept. 2014.  Official location  
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on 3D Model Processing Technologies in the Application of Freeform Surface Machining, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 1017, pp. 281-286, Sept. 2014.  Official location  
• JIANG Zhu, AKIMITSU Hozumi, TOMOHISA Tanaka, Yoshio Saito. High Efficiency Tool Path Generation for Freeform Surface Machining Based on NURBS Subdivision, Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 625, pp. 372-377, Aug. 2014.  Official location  
• Yasunori Sakai, TOMOHISA TANAKA, Masaomi Tsutsumi. Influence of the Excitation Force Amplitude on Vibration Characteristics of a Linear Rolling Bearing, Journal of the Japan Society for Precision Engineering, Vol. 80, No. 8, pp. 783-791, Aug. 2014.
• Yuanrui Zhang, Shigenobu Nagase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Positioning calibration of a parallel mechanism worktable with 6-DOF, Key Engineering Materials, Trans Tech Publications, Switzerland, Vol. 625, pp. 392-397, Aug. 2014.  Official location  
• TOMOHISA TANAKA, TSUNAMITSU NAKAHARA.  A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear, Tribology online, Vol. 8, No. 1, pp. 128-134, Jan. 2013.
• Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement of Movement Error and Its Compensation for 6-DOF Parallel Mechanism Worktable, Key Egineering Materials (Emerging Technology in Precision Engineering XIV), Trans Tech Publications Ltd, Vol. 523-524, pp. 463-468, Nov. 2012.  Official location  
• Shunsuke Oike, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Robust Production Scheduling Using Autonomous Distributed Systems, Key Engineering Materials, Trans Tech Publications, Vol. 516, pp. 166-169, June 2012.  Official location  
• Kohei Ogura, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Characteristics of Excimer Laser Ablation for Three Dimensional Machining of PMMA, Key Engineering Materials, Trans Tech Publications, Vol. 516, pp. 192-197, June 2012.  Official location  
• Xiaoyi Wang, Jing Chen, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka. Registration of 3-D Shape with Free-form Surface Using Imageware and Genetic Algorithm, Advanced Materials Research, Trans Tech Publications, Vol. 472-475, pp. 317-322, Feb. 2012.
• Jiang Zhu, Tomohisa TANAKA, Yoshio SAITO, Ryuta TANABE, Masaaki TAKENAKA, Toru FUKAMI. On-machine Measuring and Machining of Freeform Surface Using a Polar-coordinate Desktop Machine Tool, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 5, No. 4, pp. 240-251, Oct. 2011.  Official location  
• Jiang Zhu, Yuichi Takekuma, Tomohisa Tanaka, Yoshio Saito. 3D Model Registration Based on Feature Extraction, Advanced Materials Research, Trans Tech Publications, Switzerland, Vol. 299-300, pp. 1091-1094, July 2011.  Official location  
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito, Lining Sun. Study on virtual environment-based simulation, control and teleoperation in the application of robotic machining and manipulation, International Journal of Design Engineering, Inderscience Enterprises Ltd., Vol. 3, No. 3, pp. 218-231, Apr. 2011.  Official location  
• Tomohisa Tanaka, Ryo Suzuki, Jiang Zhu, Yoshio Saito. Excimer Laser 3D Machining Based on Irradiation Pulse Number Control, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 4, No. 5, pp. 1033-1043, Sept. 2010.  Official location  
• Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Manufacturing Feature Extraction of CAD Models for Machining, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 287-291, July 2010.  Official location  
• TOMOHISA TANAKA, Masahiro Komori, JIANG ZHU, YOSHIO SAITO. Development of Flexible Worktable for Endmilling Based on Parallel Mechanism, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 826-830, July 2010.  Official location  
• JIANG ZHU, Keisuke Nomura, TOMOHISA TANAKA, YOSHIO SAITO. Tool Path Planning Assist System for Freeform Surface Machining, Key Engineering Materials, Trans Tech Publications, Vol. 447-448, pp. 321-325, July 2010.  Official location  
• JIANG ZHU, Ryo Suzuki, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System, Journal of Advanced Mechanical Design, Systems, and Manufacturing, The Japan Society of Mechanical Engineers, Vol. 2, No. 4, pp. 812-823, Aug. 2008.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A 3D rough-cut model generation algorithm based on multi-resolution mesh for sculptured surface machining, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 1, No. 5, pp. 628-639, Nov. 2007.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Multi-resolution mesh for sculptured surface machining, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 1, pp. 69-80, Jan. 2007.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Multi-resolution mesh for sculptured surface machining, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 1, pp. 69-80, 2007.
• Tomohisa TANAKA, Yoshio SAITO. On the Mechanism of the Hot Wire Cutting of Polystyrene Foam (Cutting Characteristics of the Dwelling Wire), Transactions of the Japan Society of Mechanical Engineers (C), Vol. 72, No. 722, pp. 3383-3389, Oct. 2006.
• Tomohisa TANAKA, Yoshihiro IIDA, Yoshio SAITO. Trial Manufacturing of MQL Oil Mist Density Sensing System for Environmentally Friendly Machine Tools, Transactions of the Japan Society of Mechanical Engineers (C), Vol. 72, No. 715, pp. 934-940, Mar. 2006.
• Javad AKBARI, Shinzo ENOMOTO, Kazuhiko KATO, Yoshiyuki YAKABE, Tomohisa TANAKA, Yoshio SAITO. An Experimental Investigation on EDM Process Using a Desktop Machine Tool, Proceedings of ICoPE2003/2004, 2004.
• 菅谷健二郎, 田中智久, 齋藤義夫. Study on Excimer Laser Ablation for Polymer, The 5th Manufacturing & Machine Tool Conference, pp. 183, 2004.
• ナフィス・アハマッド, 田中智久, 齋藤義夫. Optimization of Turning Process Parameters by Genetic Algorithm (GA) Considering the Effect of Tool Wear, The 5th Manufacturing & Machine Tool Conference, pp. 305, 2004.
• 深見徹, 田中智久, Akbari Javad, 斎藤義夫. 弾性変形拡張方式を利用したホーニングツールの開発, 2003年度精密工学会秋季大会学術講演会講演論文集, pp. 543, 2003.
• J. Akbari, M.Imamura, T. Tanaka, Y. Saito. Ultrasonic Tactile Sensor for Robot Gripper, Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century, Niigata, pp. 351-356, 2003.
• 上原匠, 田中智久, 京極啓史, 中原綱光. 摩耗モード遷移モデルの実験的検証, トライボロジー会議予稿集 東京 2003-5, pp. 123, 2003.
• 小山田圭吾, 田中智久, Akbari Javad, 斎藤義夫. 工作機械の環境への2次的影響, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 144, 2002.
• 黄 士元, 田中智久, Akbari Javad, 斎藤義夫. 画像情報に基づく多面体形状の自動認識に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 248, 2002.
• 今村光広, 田中智久, Akbari Javad, 斎藤義夫. 超音波センサ組み込みソフトフィンガによる把持状態の検出, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 606, 2002.
• 芦塚正博, 田中智久, Akbari Javad, 斎藤義夫. 画像情報に基づく多面体形状の自動認識に関する研究(第2報) ―輪郭内部頂点を用いたパターンの定性記述―, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 548, 2002.
• 牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫. 発泡スチロールの熱線加工メカニズムに関する研究(第2報) ―熱伝達･輻射を考慮した解析―, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 488, 2002.
• 吉柳一郎, 田中智久, Akbari Javad, 斎藤義夫. 多軸ロボットによる自由曲面生成アルゴリズムの構築, 2002年度精密工学会秋季大会学術講演会講演論文集, pp. 51, 2002.
• 矢ヶ部善幸, 山田洋維祐, 田中智久, アキバリ ジャワド, 斎藤義夫. PC制御デスクトップマシンによる放電加工機, 日本機械学会第4回生産加工･工作機械部門講演会講演論文集, pp. 131, 2002.
• 坂谷内篤, 田中智久, Javad Akbari, 斎藤義夫. ロボットの把持動作に関する学習制御, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 206, 2002.
• 歌田英司, 田中智久, Javad Akbari, 斎藤義夫. 超音波接触判定センサを持つロケータの開発, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 337, 2002.
• Javad Akbari, Eiji Utada, Tomohisa Tanaka, Yoshio Saito. Sensor Integrated Locator for Intelligent Fixture, Proceeding of 6th International Conference on Mechatronics Technology, pp. 283-287, 2002.
• 杉田芳史, 田中智久, Javad Akbari, 斎藤義夫. 自由曲面形状の創成と計測に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 257, 2002.
• 前田陽介, 田中智久, Akbari Javad, 斎藤義夫. 工作機械用高速主軸の軸受隙間の最適はめあい精度に関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 14, 2002.
• 山中暁, 田中智久, Akbari Javad, 斎藤義夫. 環境対応型工作機械用ミストセンサの開発, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 63, 2002.
• 牟田憲太郎, 田中智久, Akbari Javad, 斎藤義夫. 発泡スチロールの熱線加工メカニズムに関する研究, 2002年度精密工学会春季大会学術講演会講演論文集, pp. 662, 2002.
• TOMOHISA TANAKA. The Effect of Slip on Critical Contact Pressure Causing Wear Mode Transition Based on BURWELL-STRANG's Concept -Analysis by SLip Line Field Theory-, Journal of JAST, Vol. 46, No. 4, pp. 339, 2001.
• TOMOHISA TANAKA. 微小すべり下のマイルドからシビア摩耗への遷移判別 -凝着観察による-, トライボロジー会議予稿集 東京 2001-5, pp. 111, 2001.
• TOMOHISA TANAKA. Burwell-Strangによる軽－重摩耗遷移の概念に基づく遷移臨界圧力の統計的解析, トライボロジスト, Vol. 45, No. 11, pp. 832-838, 2000.
• TOMOHISA TANAKA. An Estimation of Threshold of Mild and Severe Wear Based on Burwell-Strang's Concept by ELastic-Plastic Analysis on Rough Surface Contact, Proceedings of the International Tribology Conference Nagasaki, 2000, pp. 391, 2000.
• TOMOHISA TANAKA. カム-フォロワ間の熱的潤滑解析, 日本機械学会第74期通常総会講演論文集, pp. 29, 1997.

Book

• Chenyao Cao, Jiang Zhu, Tomohisa Tanaka. Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31, Advanced Surface Enhancement. Lecture Notes in Mechanical Engineering, Springer, Singapore, pp. 97-107, Aug. 2019.

International Conference (Reviewed)

• hibiki yamazaki, jiang zhu, tomohisa tanaka. Verification of the effectiveness of DSB tool in increasing the strength of thin plate material parts, The 19th International Conference on Precision Engineering, Proceeding of the 19th International Conference on Precision Engineering, The Japan Society for Precision Engineering, Nov. 2022.
• hibiki yamazaki, jiang zhu, tomohisa tanaka. Development of a novel burnishing tool for surface modificatio of thin-walled materials, The 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of the 10th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers, Nov. 2021.
• Muslimin, Katerina Mukti, Hasvienda M. Ridlwan, M. Sholeh, Ade Sumpena, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka. Direct NC Toolpath Generation from 3D Point Cloud Datasets, the 9th Annual Southeast Asian International Seminar, Proceedings of the 9th Annual Southeast Asian International Seminar (ASAIS 2020), Science and Technology Publications, pp. 138-145, Oct. 2021.
• Da Xie, Jiang Zhu, Tomohisa Tanaka. Graph-based Feature Recognition and Combination Method for Automatic Process Planning System, JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing, Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Material and Processing, The American Society of Mechanical Engineers, June 2020.
• Chenyao Cao, Jiang Zhu, Tomohisa Tanaka. Influence of Burnishing Process on Microstructure and Corrosion Properties of Mg Alloy AZ31, International Conference on Advanced Surface Enhancement, Sept. 2019.
• JIANG ZHU, Akira Tajima, TOMOHISA TANAKA, Hayato Yoshioka. Study on the accuracy improvement for laser forming processing of micro-wire, The 9th International Conference on Leading Edge Manufacturing in 21st Century, Proceeding of The 9th International Conference on Leading Edge Manufacturing in 21st Century, Japan Society of Mechanical Engineers, Nov. 2017.
• Yasunori Sakai, So Fukasawa, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Kaoru Hoshide, Ryuji Furusawa. Influence of Designing Parameters on Vibration Damping of Rolling Guideway, 16th International Conference on Precision Engineering, Proceeding of 16th International Conference on Precision Engineering, The Japan Society for Precision Engineering, Nov. 2016.
• Shunsuke Hotta, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka. Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium, 16th International Conference on Precision Engineering, Proceeding of 16th International Conference on Precision Engineering, The Japan Society for Precision Engineering, Nov. 2016.
• Muslimin, Zhu, J., Yoshioka, H., Tanaka, T.. Automatic segmentation and feature identification of laser scanning point cloud data for reverse engineering, International Symposium on Flexible Automation, Proceedings of International Symposium on Flexible Automation, Aug. 2016.
• Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. The Utilization of Feature Extraction in Registration Method of Laser Data Sets in Reverse Engineering of Fidelity and Precision Part, The 8th International Conference on Leading Edge Manufacturing in 21st Century, Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century, the Japan Society of Mechanical Engineers, Oct. 2015.
• Tomohisa Tanaka, Syo Harada, Jiang Zhu, Hayato Yoshioka, Yoshio Saito. Fundamental Study for Control of Hue and Brightness in the Laser Coloring, The 8th International Conference on Leading Edge Manufacturing in 21st Century, Proceeding of the 8th International Conference on Leading Edge Manufacturing in 21st Century, the Japan Society of Mechanical Engineers, Oct. 2015.
• Jiang Zhu, Masato Kato, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Research on Feature Recognition from STEP model for Automatic Process Planning of Multi-tasking Machine, The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Proceeding of the 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Asian Society for Precision Engineering and Nanotechnology(ASPEN), Sept. 2015.
• Yasunori SAKAI, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka, Yoshio Saito. Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway, MECHATRONICS 2014, Proceedings of MECHATRONICS 2014, No. OS-000671, Nov. 2014.
• Xu Zhou, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Titanium Coloring Mechanism through Laser Irradiation, the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2013.
• Tomohisa Tanaka, Shinya Oishi, Jiang Zhu, Yoshio Saito. Study on the Laser Forming of Thin Stainless-steel Wire, the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of the 5th International Conference of Asian Society for Precision Engineering and Nanotechnology, Nov. 2013.
• Jiang ZHU, Saori MUTO, Tomohisa Tanaka, Yoshio SAITO. Development of Automatic Machining Process Deciding System Based on 3D-Model, The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), pp. 123-128, Nov. 2013.
• Yuanrui Zhang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on the error compensation and machining accuracy about the 6-DOF parallel mechanism table, the 15th International Machine Tool Engineers` Conference, Proceeding of the 15th International Machine Tool Engineers` Conference, Japan Machine Tool Builders` Association, pp. 6-7, Nov. 2012.
• Xu Zhou, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on the Structural Color Appearance of Titanium by Laser Irradiation, the 15th International Machine Tool Engineers` Conference, Proceeding of the 15th International Machine Tool Engineers` Conference, pp. 8-9, Nov. 2012.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation for 3D Freeform Surface Machining Based on the Feature of CAD Model, The 2nd IFToMM Asian Conference on Mechanism and Machine Science, 2012.
• Jiang Zhu, Yusuke Narabu, Tomohisa Tanaka, Yoshio Saito. Manufacturing Feature Extraction System of 3D-Model for Process Planning, The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), Nov. 2011.
• Takahiro Kubo, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. The Contact Part Measurement on Rough Surface by Optical Methodology in High Load Region, The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceeding of The 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), Nov. 2011.
• Asim Al-Sofi, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu. Generating the Measurement Points Based on Finishing NC Data, 2011 IEEE International Conference on Mechatronics (ICM), Proceeding of 2011 IEEE International Conference on Mechatronics (ICM), pp. 34-38, Apr. 2011.
• Jiang Zhu, Akira Yanagisawa, Tomohisa Tanaka, Yoshio Saito. Development of Tool Path Generation System for Polar-coordinate Desktop Machine Tool(PDMT), The 6th International Conference on MicroManufacturing ICOMM/2011, Proceeding of the 6th International Conference on MicroManufacturing ICOMM/2011, Tokyo Denki University, pp. 149-156, Mar. 2011.
• Jiang Zhu, Keisuke Nomura, Tomohisa Tanaka, Yoshio Saito. Rough Machining Tool Path Generation for Multi-axis Turning Center Based on Multi-resolution Mesh, The 14th International Conference on Mechatronics Technology, Proceeding of the 14th International Conference on Mechatronics Technology, pp. 12-16, Nov. 2010.
• Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool Path Generation Method for Freeform Surface Machining, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 3-8, Dec. 2009.
• Jiang Zhu, Ryota Tanabe, Tomohisa Tanaka, Yoshio Saito. Polar-coordinate Desktop Machine Tool, an Intelligent Digital 3D Duplicator, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 133-138, Dec. 2009.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Excimer Laser 3D Machining Based on Irradiation Pulse Number Control, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 581-584, Dec. 2009.
• Xiaoyi Wang, Quanxian Wang, Yoshio Saito, Jiang Zhu, Tomohisa Tanaka. Reorganizable Assembly Model and Its Reorganizing Approach for Assembly Planning, the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), The Japan Society of Mechanical Engineers (JSME), No. 09-207, pp. 21-26, Dec. 2009.
• Yusuke Narabu, Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, CD Proceeding, 1A1-13, Nov. 2009.
• Masahiro Komori, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools, 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, Proceeding of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, CD Proceeding, 2A1-4, Nov. 2009.
• Tomohisa TANAKA, Bruno LEBAN, Takahiro KUBO, Yoshio SAITO, Massimiliano PAU, Hua CHEN, Makoto ISHIDA. Assessment of Accuracy of Real Contact Area Bbservation in Contact between Rough Surfaces, 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Proc. of 8th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, pp. 115-120, Sept. 2009.
• Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement and machining using polar coordiante desktop machine tool, the 13th International Machine Tool Engineers' Conference, Proceedings of the 13th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 72-73, Nov. 2008.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Freeform surface sculpturing and measurement system based on 8-axis robot system, the 13th International Machine Tool Engineers' Conference, Proceedings of the 13th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 70-71, Nov. 2008.
• JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO, Lining Sun. Study on the Virtual Reality Based Interface for Robot Integrated Machining and Manipulation, 13th Internation Conference on Machine Design and Production, Proceeding of the 13th Internation Conference on Machine Design and Production, pp. 171-186, Sept. 2008.
• Shunsuke Oike, TOMOHISA TANAKA, YOSHIO SAITO. Flexible Manufacturing Scheduling, 13th Internation Conference on Machine Design and Production, Proceeding of the 13th Internation Conference on Machine Design and Production, pp. 759-768, Sept. 2008.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 8-axis Surface Sculpturing System by Heated Cutting Tools, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), pp. 1484-1484, Mar. 2008.
• Guanglei Liu, Tomohisa Tanaka, Yoshio Saito. A Study on Miniature Automatic Tool Changer for Desktop Machine Tool, 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), No. 07-205, pp. 799-802, Dec. 2007.
• Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito. Automatic Tool Path Generation for Robot Integrated Surface Sculpturing System, The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21, Proceeding of The 4th International Conference on Leading Edge Manufacturing in 21st Century, LEM21, pp. 125-130, Nov. 2007.
• Jiang Zhu, Ryo Suzuki, Tomohisa Tanaka, Yoshio Saito. A Surface Sculpturing System Based on 8-Axis Robot, International Conference on Advanced Design & Manufacturing, ICADM-2007, Proceeding of International Conference on Advanced Design & Manufacturing, ICADM-2007, pp. 421-427, Aug. 2007.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Rough machining process and its simulation for robot integraged surface sculpturing system, the 4th IASTED International Conference on Circuits, Signals, and Systems, Prpceeding of the 4th IASTED International Conference on Circuits, Signals, and Systems, pp. 368-373, Nov. 2006.
• Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito. An 8-axis robot based rough cutting system for surface sculpturing, 11th International Conference on Precision Engineering (11th ICPE), Towards Synthesis of Micro-/Nano-systems, Springer, pp. 139-144, Aug. 2006.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 3D mesh simplification for freeform surfacing, Tehran International Congress on Manufacturing Engineering (TICME2005), CD Proceeding, Dec. 2005.

Domestic Conference (Reviewed)

• Jun Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Compact Machine Tool with Working Space in Shell, Mechanical Engineering Congress 2009, Proceeding of Mechanical Engineering Congress 2009, The Japan Society of Mechanical Engineers, Vol. 4, No. 09-1, pp. 233-234, Sept. 2009.
• Yuichi Takekuma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Mold Casting of Ceramics, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 367-368, Sept. 2009.
• Masahiro Komori, Yoshio Saito, Tomohisa Tanaka, Jiang Zhu. Development of Work Table with 6-DOF Parallel Mechanism for Machine Tools, Abrasive Technoloogy Conference 2009, Abrasive Technoloogy Conference 2009, The Japan Society for Abrasive Technology, pp. 167‐168, Sept. 2009.
• Xiaoyi Wang, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A New Assembly Model Capable of Reorganizing Assembly Structure, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 523‐524, Sept. 2009.
• Takahiro Kubo, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on the accuracy improvement of real contact part distinction for the rough surface, Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2009, The Japan Society for Procession Engineering, pp. 733-734, Sept. 2009.
• Yusuke Narabu, Zuanshi Haranud, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Optimal Tool-path Selection for Milling Free-form Surface Based on the Form of Surface, Mechanical Engineering Congress 2009, Proceeding of Mechanical Engineering Congress 2009, The Japan Society of Mechanical Engineers, Vol. 4, No. 09-1, pp. 281-282, Sept. 2009.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Non-contact 3-D Measurement Path Generation for Multi-axis Robot System, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 491-192, Mar. 2009.
• Ryota Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Measurement and machining of 3D shape by using polar coordiante desktop machine tool, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 519-520, Mar. 2009.
• Ryo Suzuki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Free-form Surface Machining of Polymeric Material Based on Laser Ablation with Irradiation Pulse Number Control, 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, Proceeding of 2009 Spring Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 931-932, Mar. 2009.
• Ryuta Tanabe, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Machining Using Polar Coordinate Desktop Machine Tool, Autumn Annual Meeting of the Japan Society for Procession Engineering, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 137-138, Sept. 2008.
• Masataka Tanase, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Non-contact Three Dimensional Measurement Using Multi-axis Robot System, Autumn Annual Meeting of the Japan Society for Procession Engineering, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering, the Japan Society for Procession Engineering, pp. 241-242, Sept. 2008.

International Conference (Not reviewed / Unknown)

• Hibiki Yamazaki, JIANG ZHU, TOMOHISA TANAKA. Burnishing tool capable of surface modification of thin plate material, The 19th International Machine Tool Engineers' Conference, Proceeding of the IMEC2022, Japan Machine Tool Builders’ Association, pp. 54-55, Nov. 2022.
• Jiang Zhu, Chenyao Cao, Tomohisa Tanaka. Corrosion Resistance Enhancement of Biodegradable Magnesium by Ball Burnishing Processing, The Tenth International Forum on Advanced Material Science and Technology, Dec. 2019.
• Shunnya Kobayashi, Yasunori Sakai, TOMOHISA TANAKA, JIANG ZHU. Development of Structure Integrated Passive Damper (P-DACS), the 18th International Machine Tool Engineers` Conference, Proceeding of the 18th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 18-19, Nov. 2018.
• Chenyao Cao, JIANG ZHU, TOMOHISA TANAKA, Yasunori Sakai. Modification of Metal Structure Based on Burnishing Processing, the 18th International Machine Tool Engineers` Conference, Proceeding of the 18th International Machine Tool Engineers' Conference, Japan Machine Tool Builders' Association, pp. 30-31, Nov. 2018.
• Shunsuke Hotta, Jiang Zhu, Tomohisa Tanaka, Hayato Yoshioka. Titanium Coloring Machining by Laser Irradiation, the 17th International Machine Tool Engineers` Conference, Proceedings of the 17th International Machine Tool Engineers` Conference, Japan Machine Tool Builders' Association, pp. 84-85, Nov. 2016.
• Jiang Zhu, Shunsuke Hotta, Hayato Yoshioka, Tomohisa Tanaka. Study on the titanium oxide layer generation mechanism by YVO4 laser irradiation on titanium, the 8th Japan-Taiwan workshop on mechanical engineering and aerospace, Proceeding of the 8th Japan-Taiwan workshop on mechanical engineering and aerospace, Nov. 2016.
• yuanrui zhang, JIANG ZHU, Hayato Yoshioka, YOSHIO SAITO, TOMOHISA TANAKA. Study on the error compensation and accuracy improvement of 6-DOF parallel mechanism worktable, the 16th International Machine Tool Engineers` Conference, Proceeding of the 16th International Machine Tool Engineers` Conference, Japan Machine Tool Builders' Association, Nov. 2014.
• Yasunori Sakai, JIANG ZHU, TOMOHISA TANAKA, Hayato Yoshioka, YOSHIO SAITO. Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction, the 16th International Machine Tool Engineers` Conference, Proceeding of the 16th International Machine Tool Engineers` Conference, Japan Machine Tool Builders' Association, Nov. 2014.
• B. Leban, M. Pau, M. Ishida, T. Tanaka. On the Reliability and Robustness of a Non-Invasive Experimental Method for the Measurements of Real Area of Contact between Rough Surfaces, International Tribology Conference Hiroshima 2011, Oct. 2011.
• Tsunamitsu Nakahara, Tomohisa Tanaka. A Stochastic Analysis of Plastic Area on Rough Surface Contact in Relation with Transition from Mild to Severe Wear, International Tribology Conference, Hiroshima 2011, International Tribology Conference, Hiroshima 2011, Oct. 2011.
• Shota Sekiguchi, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Freeform Surface Machining and Measurement by 8-axis Robot System, The 14th International Machine Tool Engineers' Conference, Proceedings of the 14th International Machine Tool Egineers' Conference, Japan Machine Tool Builders' Association, pp. 80-81, Oct. 2010.
• Ryo Tanabe, Yoshio Saito, Tomohisa Tanaka. Measurement and Machining by using Polar Coordinate Desktop Machine Tool, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), Mar. 2008.
• Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation Method for Freeform Surface Machining, ICCES’08(International Conference on Computational & Experimental Engineering and Science), Proceeding of ICCES’08(International Conference on Computational & Experimental Engineering and Science), Mar. 2008.
• Nafis AHMAD, Tomohisa TANAKA, Yoshio SAITO. Optimization of End Milling Operation By Genetic Algorithm based on Self Organizing Adaptive Penalty Strategy, The 12th Asia Pacific Management Conference XII-2006, Proceedings of The 12th Asia Pacific Management Conference XII-2006, pp. 1293-1299, Nov. 2006.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 8-axis robot integrated surface sculpturing system, New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference, New Technologies of Machine Tool and Manufacturing, Joint Event of the 12th International Machine Tool Engineers Conference, pp. 40-41, Nov. 2006.
• Tomohisa Tanaka, Masahiro Ashizuka, Yoshio Saito, Tsunamitsu Nakahara. Study on The Contact Characteristics of Truncated Surfaces, 3rd Asia International Conference on Tribology, Proceedings of The 3rd Asia International Conference on Tribology, pp. 43-44, Oct. 2006.
• Jiang Zhu, Ryoko Tanaka, Tomohisa Tanaka, Yoshio Saito. An 8-Axis Robot Based Rough Cutting System for Surface Sculpturing, The 11th International Conference on Precision Engineering (ICPE), Proc The 11th International Conference on Precision Engineering (ICPE), pp. 134-144, 2006.
• N.Ahmad, T.Tanaka, Y.Saito. Optimization of Cutting Parameters for End Milling Operation by SOAP Based Genetic Algorithm, 6th Int. Conf. on Mech. Engr., Proc. 6th Int. Conf. on Mech. Engr., pp. ICME05-AM-08, Dec. 2005.
• J.Zhu, T.Tanaka, Y.Saito. 3D Mesh Simplification for FreeForm Surfacing, Teheran International Congress on Manufacturing Engineering, Proc. Teheran International Congress on Manufacturing Engineering, pp. Code-1180, Dec. 2005.
• Nafis AHMAD, Tomohisa TANAKA, Yoshio SAITO. Investigation of the Constraints for Optimization of Turning Process by GA with Self-Organizing Adaptive Penalty strategy, International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Proceedings of the 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, pp. 319-324, Oct. 2005.
• Tomohisa TANAKA, Chikara YAMANAKA, Keiji KYOGOKU, Tsunamitsu NAKAHARA. The Effect of Interaction between Neighboring Asperity Contacts on Wear Mode Transition in Sliding Contact of Rough Surfaces, 3rd World Tribology Congress, Proceedings of the 3rd World Tribology Congress, pp. WTC2005-63617, Sept. 2005.
• Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. A new mesh simplification algorithm for the application of surface sculpturing, The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics, Proceeding of The First JTU-TIT Joint Workshop on Creative Engineering-Mechanics, Control and Advanced Robotics, CD Proceeding, Sept. 2005.
• T.Tanaka, S.Sugiyama, C.Yamanaka, S.Momozono, K.Kyogoku, T.Nakahara. Measurement of true contact area by means of elliptical polarized light reflection under slip condition, International Tribology Conference Kobe, Synopses of the International Tribology Conference Kobe, pp. G15, May 2005.
• T.SUGIE, T.TANAKA, J.AKBARI, Y.SAITO. An Approximation of Free-Formed Surface for NC Machining, Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century, Niigata, pp. 457-460, 2003.
• Tomohisa TANAKA, Keiji KYOGOKU, Tsunamitsu NAKAHARA. The Effect of Shear on Transition of Load Condition in 2D Contact of Rough Surfaces, 2nd World Tribology Congress, Proceedings of The 2nd World Tribology Congress, pp. *, Sept. 2001.

Domestic Conference (Not reviewed / Unknown)

• Ryoukou Kamiya, JIANG ZHU, TOMOHISA TANAKA. Burnishing of thin plate material using a rolling ball point tool, 2023年度砥粒加工学会学術講演会, 2023年度砥粒加工学会学術講演会講演論文集, 公益社団法人 砥粒加工学会, Aug. 2023.
• Kazuaki Tokumo, JIANG ZHU, TOMOHISA TANAKA. High precision NC machining based on 3D measurement of position and posture in workpiece attachment process, 日本機械学会生産システム部門研究発表講演会2023, 日本機械学会生産システム部門研究発表講演会2023講演論文集, 一般社団法人 日本機械学会, No. 23-10, Mar. 2023.
• Hibiki Yamazaki, JIANG ZHU, TOMOHISA TANAKA. Evaluation of the burnishing process of sheet metal materials by double side burnishing tool, 2022年度精密工学会春季大会学術講演会, 2022年度精密工学会春季大会学術講演会論文集, 一般社団法人 精密工学会, pp. 731-732, Mar. 2022.
• Masaya Morinaga, TOMOHISA TANAKA, JIANG ZHU, 大谷祐輔. Development of a complex groove grinding path derivation algorithm for the manuifacture of high performance end mills, 生産システム部門研究発表講演会2022, 生産システム部門研究発表講演会2022講演論文集, 一般社団法人 日本機械学会, Mar. 2022.
• Masaya Morinaga, TOMOHISA TANAKA, JIANG ZHU, 大谷祐輔. Algorithm for calculate desired machining parameters of grinding wheel for end mill groove, 日本機械学会生産システム部門研究発表講演会2021, 生産システム部門研究発表講演会2021 講演論文集, 一般社団法人 日本機械学会, Mar. 2021.
• 青木 繁, Yasunori Sakai, TOMOHISA TANAKA, Shihao Liu. 高精度テクスチャを創生する超音波応用転写加工技術の開発:（基礎的実験）, Dynamics & Design Conference 2019, Aug. 2019.
• Chenyao Cao, JIANG ZHU, TOMOHISA TANAKA, Yasunori Sakai. Influence of processing condition on surface modification effect of Mg alloys by ball burnishing process, 2019年度精密工学会春季大会学術講演会, 2019年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2019.
• 青木 繁, Yasunori Sakai, TOMOHISA TANAKA. 超音波振動応用加工例と塑性加工への応用の展望, 北陸信越支部総会・講演会, Mar. 2019.
• Yasunori Sakai, TOMOHISA TANAKA, Shunnya Kobayashi, JIANG ZHU. 異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答, 日本機械学会 生産システム部門研究発表講演会2019, 日本機械学会, Mar. 2019.
• Jingyou Wu, TOMOHISA TANAKA, JIANG ZHU, Yasunori Sakai. Laser coloring on titanium by controlling oxide film formation mode, 2018年度精密工学会春季大会学術講演会, 2018年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2018.
• Takumi Kobayashi, Yasunori Sakai, TOMOHISA TANAKA, JIANG ZHU. Influence of geometrical parameters of passive-damper with anisotropic composite structure (P-DACS) on its dynamical characteristics, 2018年度精密工学会春季大会学術講演会, 2018年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2018.
• Yasunori Sakai, TOMOHISA TANAKA, JIANG ZHU. 金属と高分子を複合 した異方構造を有す るパッシブダンパ （P-DACS）の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響, 2017年度精密工学会春季大会学術講演会, 2017年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2017.
• Shunsuke Hotta, Hayato Yoshioka, Jiang Zhu, Tomohisa Tanaka. The Influence of Laser Irradiation Parameters to the Surface Condition and the Color of Titanium, 2017年度精密工学会春季大会学術講演会, 2017年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2017.
• Satoshi Inoue, Yasunori Sakai, TOMOHISA TANAKA, Hayato Yoshioka, JIANG ZHU, 星出薫, 古澤竜二. Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State, 2017年度精密工学会春季大会学術講演会, 2017年度精密工学会春季大会学術講演会講演論文集, 公益社団法人 精密工学会, Mar. 2017.
• Yasunori Sakai, TOMOHISA TANAKA, JIANG ZHU. Influence of filler condition on damping capacity of synthetic resin, 第11回日本機械学会生産加工・工作機械部門講演会, 第11回生産加工・工作機械部門講演会 講演論文集, 日本機械学会, pp. 137-138, Oct. 2016.
• Akira Tajima, Hayato Yoshioka, JIANG ZHU, TOMOHISA TANAKA. Improvement of the processing precision in the laser forming for metal wire, 2016年度精密工学会春季大会学術講演会, 2016年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 817-818, Mar. 2016.
• Yasunori Sakai, JIANG ZHU, Hayato Yoshioka, TOMOHISA TANAKA. Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway, 2016年度精密工学会春季大会学術講演会, 2016年度精密工学会春季大会学術講演会講演論文集, 精密工学会, pp. 739-740, Mar. 2016.
• Syunsuke Hotta, Hayato Yoshioka, JIANG ZHU, TOMOHISA TANAKA. Coloring of Titanium by using YVO4 Laser -Relation between laser parameters and coloring-, 日本機械学会関東支部第22期総会講演会, 日本機械学会関東支部第22期総会講演会講演論文集, 日本機械学会, No. 160-1, Mar. 2016.
• Sou Fukasawa, Yasunori Sakai, JIANG ZHU, Hayato Yoshioka, TOMOHISA TANAKA, 星出 薫, 古澤竜二. Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway, 日本機械学会関東支部第22期総会講演会, 日本機械学会関東支部第22期総会講演会講演論文集, 日本機械学会, No. 160-1, Mar. 2016.
• Yasunori Sakai, Sou Fukasawa, JIANG ZHU, Hayato Yoshioka, TOMOHISA TANAKA, 星出 薫, 古澤竜二. Development of Measuring Apparatus for Contact Damping of Rolling Guideway, 日本機械学会関東支部第22期総会講演会, 日本機械学会関東支部第22期総会講演会講演論文集, 日本機械学会, No. 160-1, Mar. 2016.
• Yasunori Sakai, JIANG ZHU, Hayato Yoshioka, TOMOHISA TANAKA. 有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定, 日本機械学会2015年度年次大会, Sept. 2015.
• Muslimin, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. A New Method for Registration Laser Data Sets and CMM Data Sets in Reverse Engineering of Accurate Part, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1101-1102, Mar. 2015.
• Saurabh Bhide, Jiang Zhu, Hayato Yoshioka, Tomohisa Tanaka, Yoshio Saito. Calculation of Intersection Points between Triangulated Mesh and Point Cloud Data, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1099-1100, Mar. 2015.
• Mikiya Hara, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Study on Effect of Cutting Parameter on Accuracy of Surface in the Milling of Polytetrafluoroethylene, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 1039-1040, Mar. 2015.
• Masato Kato, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Graph based automatic process planning system for multi-tasking machine, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 773-774, Mar. 2015.
• Shigenobu Nagase, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Efficiency of the free-form surface machining with optimum tool-path for each segment, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 771-772, Mar. 2015.
• Yasunori Sakai, Hayato Yoshioka, Jiang Zhu, Yoshio Saito, Tomohisa Tanaka. Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 351-352, Mar. 2015.
• Huiwei Gao, Jiang Zhu, Hayato Yoshioka, Yoshio Saito, Tomohisa Tanaka. Construction of Flexible Production Scheduling System Using Autonomous Distributed Systems, Spring Annual Meeting of the Japan Society for Procession Engineering 2015, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015, The Japan Society of Precision Engineering, pp. 267-268, Mar. 2015.
• Sho Harada, JIANG ZHU, TOMOHISA TANAKA, Hayato Yoshioka, YOSHIO SAITO. Research on Titanium Coloring using Laser Irradiation -Improvement repeatability in coloring marking and realization of wide color space, JSME Manufacturing Systems Division Conference 2015, Proceesing of JSME Manufacturing Systems Division Conference 2015, The Japan Society of Mechanical Engineers, No. 15-8, pp. 109-110, Mar. 2015.
• Mikiya HARA, Jiang ZHU, Tomohisa TANAKA, Yoshio SAITO. Study on Effect of Cutting Parameter on Cutting Resistance in the Milling of Polytetrafluoroethylene, ２０１４年度砥粒加工学会学術講演会, ２０１４年度砥粒加工学会学術講演会論文集, 公益社団法人 砥粒加工学会, Sept. 2014.
• Yasunori Sakai, Toshiki Hanaoka, JIANG ZHU, YOSHIO SAITO, TOMOHISA TANAKA. 加振力振幅が直動転がり案内の動特性に及ぼす影響, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Nitin Sharma, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. 3D Model Registration Based on Feature Extraction Using Segmentation, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Yuki Koike, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. LSI製造プロセスにおける搬送経路に基づくマルチクラスタシステムの効率化, 2014年度精密工学会春季大会学術講演会, 2014年度精密工学会春季大会学術講演会講演論文集, Mar. 2014.
• Naoki Maeda, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Fabrication of three-dimensional laminate of thin metal wire using a laser, 日本機械学会生産システム部門研究発表講演会2014, 日本機械学会生産システム部門研究発表講演会2014講演論文集, 日本機械学会, No. 14-8, pp. 107-108, Mar. 2014.
• Shinya Oishi, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Study on Laser Forming Mechanism of Stainless Wire, 日本機械学会生産システム部門研究発表講演会2014, 日本機械学会生産システム部門研究発表講演会2014講演論文集, 日本機械学会, No. 14-8, pp. 105-106, Mar. 2014.
• Mikiya Hara, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Effect of Cutting Parameter on Surface Roughness in the Milling of Polytetrafluoroethylene, ABTEC2013砥粒加工学会学術講演会, ABTEC2013砥粒加工学会学術講演会講演論文集, 砥粒加工学会, pp. 214-216, Aug. 2013.
• Saori Muto, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of the Automatic Machining Process Deciding System Based on 3D-model, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 1073-1074, Mar. 2013.
• Osama Abdelaal, Jiang Zhu, Tomohisa Tanaka, Saied Darwish, Yoshio Saito. Additive Manufacturing of Custom-made Hip Implants, The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, The Japan Society of Mechanical Engineers, No. 13-6, pp. 91-92, Mar. 2013.
• Shinya Oishi, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Study on Laser Forming for Stainless Wire, The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, Proceeding of The Japan Society of Mechanical Engineers, Manufacturing Systems Division Conference 2013, The Japan Society of Mechanical Engineers, No. 13-6, pp. 69-70, Mar. 2013.
• Akimitsu Hozumi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. High Efficiency Tool Path Generation Method for NURBS Surface Machining Based on NURBS Surface Subdivision, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 1065-1066, Mar. 2013.
• Masaomi Hasegawa, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Validation of Rough Machining Process for Multi-axis Machine Tools by Using Multi-resolution Mesh, Spring Annual Meeting of the Japan Society for Procession Engineering 2013, 2013年度精密工学会春季大会学術講演会講演論文集, The Japan Society of Precision Engineering, pp. 55-56, Mar. 2013.
• Xu Zhou, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on Coloring Mechanism of Oxide Layers on Titanium by Laser Irradiating, The 9th Manufacturing & Machine Tool Conference, Proceeding of the 9th Manufacturing & Machine Tool Conference, 日本機械学会, No. 12-10, pp. 275-276, Oct. 2012.
• Jiang Zhu, Jumpei Goto, Tomohisa Tanaka, Yoshio Saito. Tool Path Generation for Layered Manufacturing by Wire Electric Discharge Machining (WEDM), The 9th Manufacturing & Machine Tool Conference, Proceeding of the 9th Manufacturing & Machine Tool Conference, 日本機械学会, No. 12-10, pp. 103-104, Oct. 2012.
• Yuanrui Zhang, Jiaotao Wu, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Analysis of error factors in the worktable of 6-DOF parallel mechanism, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 843-844, Mar. 2012.
• Yuya Iitsuka, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on modeling of wire structures by laser forming, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 05-06, Mar. 2012.
• Haruka Tsukasaki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Study on molten laminating of the metal resin combined molding using the laser, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 15-16, Mar. 2012.
• Shota Sekiguchi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Processing System Construction for 8-axis Redundant Robot, Spring Annual Meeting of the Japan Society for Procession Engineering 2012, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2012, The Japan Society of Precision Engineering, pp. 675-676, Mar. 2012.
• Masaomi Hasegawa, Jiang Zhu, TOMOHISA TANAKA, YOSHIO SAITO. Validation of rough machining process for turning center by using multi-resolution mesh, JSME Manufacturing Systems Division Conference 2012, Proceding of JSME Manufacturing Systems Division Conference 2012, The Japan Society of Mechanical Engineers, No. 12-7, pp. 29-30, Mar. 2012.
• Akimitsu Hozumi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of Processing Support System for 6-axis WEDM, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Haruka Tsukasaki, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Development of the Support-free RP Device with 5-axis Control, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Shunsuke Oike, Tomohisa Tanaka, Jiang Zhu, Yoshio Saito. Robust Production Scheduling Using Autonomous Distributed Systems, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Shota Sekiguchi, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Toolpath Generation for 3D Processing by 8-axis Redundant Robot System, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Saori Muto, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Fabrication and Evaluation of 3D Shape by Rapid Prototyping, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Shinya Kinoshita, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research on Appearance of Structural Color by Laser Irradiation to Titanium, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Taku Nishio, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Fundamental Research to Construct the Model Made from Heterogeneous Materials by Using Laser, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Yuya Iitsuka, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Wire Structure Forming by Laser Forming, Mechanical Engineering Congress, 2011 Japan, Mechanical Engineering Congress, 2011 Japan, The Japan Society of Mechanical Engineers, No. 11-1, Sept. 2011.
• Kohei Ogura, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Characteristics of excimer laser ablation for three dimensional machining of PMMA, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 125-126, Mar. 2011.
• Yusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Development of the automatic machining method deciding system based on 3D-model, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 577-578, Mar. 2011.
• Yuichi Takekuma, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Construction of shape inspection system by comparing three-dimensional models, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 665-666, Mar. 2011.
• Takahiro Kubo, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. High load wear-out evaluation of characteristics by direct contact point observation in rough contact area, Spring Annual Meeting of the Japan Society for Procession Engineering 2011, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2011, The Japan Society of Precision Engineering, pp. 759-760, Mar. 2011.
• Shunsuke Oike, TOMOHISA TANAKA, JIANG ZHU, YOSHIO SAITO. Robust Production Scheduling Using Autonomous Distributed Systems, JSME Manufacturing Systems Division Conference 2011, Proceding of JSME Manufacturing Systems Division Conference 2011, The Japan Society of Mechanical Engineers, No. 11-7, pp. 85-86, Mar. 2011.
• Kengo Shintaku, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Accuracy Maintenance Using the Measured Data of Already Processed Part After Workpiece Position is Changed, 生産と加工に関する学術講演会2010, Proceeding of the 8th Manufacturing & Machine Tool Conference, 社団法人 日本機械学会, No. 10-11, pp. 243-244, Oct. 2010.
• Koji Nishiyama, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Tool Path Generation for 2.5-Axis Contour Machining, Autumn Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Autumn Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 403-404, Sept. 2010.
• Takahiro Kubo, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Plastic Deformation State Distinction in Rough Contact Surface Under Heavy Load Condition, Abrasive Technoloogy Conference 2010, Proceeding of Abrasive Technoloogy Conference 2010, The Japan Society for Abrasive Technology, pp. 179-180, Aug. 2010.
• Keisuke Nomura, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. High-efficiency Processing for Turning Center by Using Multi-resolution Mesh, Spring Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 1037-1038, Mar. 2010.
• Yuusuke Narabu, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Automatic Manufacturing Feature Extraction of CAD Models for Machining, 日本機械学会北陸信越支部第47期総会・講演会, 日本機械学会北陸信越支部第47期総会・講演会講演論文集, 社団法人日本機械学会北陸信越支部, No. 107-1, pp. 409-410, Mar. 2010.
• Masahiro Komori, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Development of Work Table System with 6-DOF Parallel Mechanism for Machine Tools, Spring Annual Meeting of the Japan Society for Procession Engineering 2010, Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2010, The Japan Society of Precision Engineering, pp. 1039-1040, Mar. 2010.
• Fei Feng, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Tool path generation for the 3D model`s machining by multi-axis processing system, JSME Manufacturing Systems Division Conference 2009, Proceeding of JSME Manufacturing Systems Division Conference 2009, The Japan Society of Mechanical Engineers, No. 09-5, pp. 19-20, Mar. 2009.
• JIANG ZHU, Zuanshi Haranud, TOMOHISA TANAKA, YOSHIO SAITO. Study on Feature Area Extraction for Freeform Surface Based on Mesh Simplification, the 7th Manufacturing & Machine Tool Conference, Proceeding of the 7th Manufacturing & Machine Tool Conference, The Japan Society of Mechanical Engineers, No. 08-19, pp. 263-264, Nov. 2008.
• Keisuke Nomura, Jiang Zhu, Tomohisa Tanaka, Yoshio Saito. Research of Improvement of 8-axis Processing System, Mechanical Engineering Congress, 2008 Japan (MECJ-08), Mechanical Engineering Congress, 2008 Japan (MECJ-08), The Japan Society of Mechanical Engineers, Vol. 4, No. 08-1, pp. 255-256, Aug. 2008.
• JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Rough Machining Model Generation for Freeform Surface Machining, JSME Manufacturing System Division Conference 2008, Proceeding of JSME Manufacturing System Division Conference 2008, The Japan Cociety of Mechanical Engineers, No. 08-13, pp. 57-58, July 2008.
• Zuanshi Haranud, JIANG ZHU, TOMOHISA TANAKA, YOSHIO SAITO. Study on Freeform Surface Tool Path Generation Method, JSME Manufacturing System Division Conference 2008, Proceeding of JSME Manufacturing System Division Conference 2008, The Japan Cociety of Mechanical Engineers, No. 08-13, pp. 59-60, July 2008.
• Kazuki HONDA, Yoshio SAITO, Tomohisa TANAKA. Molding process for CFRP using High-Frequency Induction Heating, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 1075-1076, Mar. 2008.
• Atsushi KAWAMATA, Yoshio SAITO, Tomohisa TANAKA. Research on miniaturization of machine tool by unified structure, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 609-610, Mar. 2008.
• Junichi HADA, Tomohisa TANAKA, Yoshio SAITO. Systematization of Combined Machining Process, 2008年度 精密工学会春季大会学術講演会, 2008年度 精密工学会春季大会学術講演会 講演論文集, pp. 879-880, Mar. 2008.
• Tomohisa Tanaka, Bruno Leban, Yoshio Saito, Hua Chen, Makoto Ishida. Characteristics of the Full Refl ection Contact Area Observation in Contactbetween Spherical Convexity and Flat Surface, JAST Tribology Conference Saga, Proceedings of JAST Tribology Conference Saga, September 2007, pp. 333-334, Oct. 2007.
• Masahiro Komori, Yoshio Saito, Tomohisa Tanaka. Characteristic of Linear-Actuated Parallel Mechanism, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 31-32, Sept. 2007.
• Junichi Hada, TOMOHISA TANAKA, YOSHIO SAITO. Systematization of Machining Process for Pocket Shape Using CAM System, 2007年度 精密工学会秋季大会学術講演会 講演論文集, 2007年度 精密工学会秋季大会学術講演会, pp. 395-396, Sept. 2007.
• Atsushi Kawamata, YOSHIO SAITO, TOMOHISA TANAKA. Research on miniaturization of machine tool by unified structure, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 3-4, Sept. 2007.
• Zuanshi Haranud, Tomohisa Tanaka, Yoshio Saito. Study on constant scallop height tool path generation for freeform surface machining, 2007年度 精密工学会秋季大会学術講演会, 2007年度 精密工学会秋季大会学術講演会 講演論文集, pp. 73-74, Sept. 2007.
• Tomohisa Tanaka, Tsunamitsu Nakahara. Theoretical Study on the Effect of Running-In on Severity of Rough Surface Contact, JAST Tribology Conference Saga, Proceedings of JAST Tribology Conference Saga, September 2007, pp. 331-332, Sept. 2007.
• Tomohisa TANAKA, Noriko TAKASHITA, Bruno LEBAN, Yoshio SAITO. Observation of the Real Contact Area in Sliding Contact between Primitive Bump and Flat Surface, 2007年度 砥粒加工学会学術講演会 講演論文集, pp. 103-104, Sept. 2007.
• TOMOHISA TANAKA, YUICHIRO KIMURA, YOSHIO SAITO, TAKAYUKI KUMITA, YASUHIRO KOMAI. Study on Practical Implementation of the Honing Tools for Machining Centers, 2007年度砥粒加工学会学術講演会, 2007年度砥粒加工学会学術講演会講演論文集, pp. 89-90, Sept. 2007.
• Atsushi Kawamata, Yosio Saito, Tomohisa Tanaka. Effect of Spindle Through MQL on End Milling, 2007年度 砥粒加工学会学術講演会, 2007年度 砥粒加工学会学術講演会 講演論文集, pp. 191-192, July 2007.
• 竹中正彬, 田中智久, 齋藤義夫. 極座標型計測・加工装置の誤差補正に関する研究, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 193-194, Mar. 2007.
• 高下法子, 田中智久, 斎藤義夫. 粗面の接触特性に及ぼす接線力の影響, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 269-270, Mar. 2007.
• 劉光磊, 斉藤義夫, 田中智久. デスクトップ型工作機械に適した小型自動工具交換装置に関する研究, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 195-196, Mar. 2007.
• 竹中正彬, 田中智久, 齋藤義夫. 極座標型デスクトップマシンツールを用いた計測, 日本機械学会第6回生産加工･工作機械部門講演会, 日本機械学会第6回生産加工･工作機械部門講演会講演論文集, pp. 11-12, Nov. 2006.
• 本田兼基, 田中智久, 齋藤義夫. MQL加工用ミストセンサの開発, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 305-306, Mar. 2006.
• 飯田喜洋, 田中智久, 齋藤義夫. 多軸ロボットシステムによる形状計測と精度評価, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 1081-1082, Mar. 2006.
• 芦塚正博, 田中智久, 齋藤義夫. トランケーションが及ぼす接触特性への影響(第2報) ―全反射光を利用した真実接触面積測定実験による検討―, 2006精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 387-388, Mar. 2006.
• 下河辺学, 田中智久, 齋藤義夫. CAMシステムを利用したポケット形状加工の体系化, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 91-92, Mar. 2006.
• 菅谷健二郎, 田中智久, 齋藤義夫. エキシマレーザ加工による高分子材料の3次元形状創成, 2006年度精密工学会春季大会, 2006年度精密工学会春季大会学術講演会講演論文集, pp. 1231-1232, Mar. 2006.
• 田中智久, 京極啓史, 中原綱光. 真実接触面積に及ぼす接線力の影響, トライボロジー会議予稿集 代々木 2005-11, トライボロジー会議 2005秋 東京, pp. 289-290, Nov. 2005.
• 菅谷健二郎, 田中智久, 齋藤義夫. 高分子材料へのエキシマレーザアブレーション加工に関する研究, 2005年度精密工学会秋季大会 京都, 2005年度精密工学会秋季大会学術講演会講演論文集, pp. 389-390, Sept. 2005.
• 高下法子, 田中智久, 齋藤義夫. 弾性変形拡張方式によるホーニングツールの開発, 2005年度精密工学会秋季大会 京都, 2005年度精密工学会秋季大会学術講演会講演論文集, pp. 305-306, Sept. 2005.
• 芦塚正博, 田中智久, 齋藤義夫. トランケーションが及ぼす接触特性への影響, 2005年度精密工学会秋季大会 京都, 2005年度精密工学会秋季大会学術講演会講演論文集, pp. 247-248, Sept. 2005.
• 原雄太, 田中智久, 齋藤義夫. 工作機械の消費電力評価方法の構築, 2005年度精密工学会春季大会 東京, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 743-744, Mar. 2005.
• 深見徹, 田中智久, 齋藤義夫. 極座標型デスクトップマシンツールを用いた加工と計測, 2005年度精密工学会春季大会 東京, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 697-698, Mar. 2005.
• 杉恵貴史, 田中智久, 齋藤義夫. 8軸制御曲面加工システムの構築とそのプログラミング, 2005年度精密工学会春季大会 東京, 2005年度精密工学会春季大会学術講演会講演論文集, pp. 939-940, Mar. 2005.
• TOMOHISA TANAKA, Satoshi SUGIYAMA, Chikara YAMANAKA, Satoshi MOMOZONO, Keiji KYOGOKU, Tsunamitsu NAKAHARA. JAST Tribology Conference 2004 Tottori, トライボロジー会議予稿集 鳥取 2004-11, pp. 17-18, Nov. 2004.
• 下河辺, 原雄太, 田中智久, 齋藤義夫. Measurement and Evaluation of Power Consumption for Machine Tool, 2004年度精密工学会秋季大会学術講演会講演論文集, pp. 107, Sept. 2004.
• 飯田喜洋, 田中智久, 齋藤義夫. Development of Mist Sensor for MQL Machining Process, 2004年度精密工学会秋季大会学術講演会講演論文集, pp. 109, Sept. 2004.
• 歌田英司, 菅谷健二郎, 田中智久, Akbari Javad, 齋藤義夫. Study on Excime Laser Machining of Polystyrene Foam, 2004年度精密工学会春季大会学術講演会講演論文集, pp. 995, Mar. 2004.
• 福永悦史, 田中智久, Akbari Javad, 齋藤義夫. Development of the high-speed spindle for micro machine tools and application to MQL processing, 2004年度精密工学会春季大会学術講演会講演論文集, pp. 83, Mar. 2004.
• 山田維祐, 大野竜太, 田中智久, Akbari Javad, 齋藤義夫. Development of the Auto Alignment Mechanism for a Desk-Top Machine Tool, 2004年度精密工学会春季大会学術講演会講演論文集, pp. 453, Mar. 2004.
• 高本尚志, 田中智久, Akbari Javad, 齋藤義夫. Study on ultra-precision machining of electroless Ni-P composite alloy, 2004年度精密工学会春季大会学術講演会講演論文集, pp. 677, Mar. 2004.

Other Publication

• Yasunori Sakai, 青木 繁, TOMOHISA TANAKA. 機械加工における超音波振動の応用例と今後の展望, 超音波テクノ, Vol. 31, No. 6, pp. 1-5, Dec. 2019.

Patent

• TOMOHISA TANAKA. 医療用挿入具. Patent. Published. 国立大学法人東京工業大学, 国立研究開発法人産業技術総合研究所, 国立大学法人東海国立大学機構, 学校法人藤田学園, 学校法人名城大学, 東京都公立大学法人. 2021/03/29. 特願2021-055618. 2022/10/12. 特開2022-152741. 2022.
• TOMOHISA TANAKA, Yasunori Sakai. 加工ツールを用いた穴加工機. Patent. Registered. 国立大学法人東京工業大学. 2018/06/11. 特願2018-110851. 2019/12/19. 特開2019-214079. 特許第7127810号. 2022/08/22 2022.
• TOMOHISA TANAKA, Yasunori Sakai. 制振ダンパ. Patent. Registered. 国立大学法人東京工業大学. 2017/06/13. 特願2017-115916. 2019/01/10. 特開2019-002441. 特許第6908921号. 2021/07/06 2021.

Degree

• 粗さを有する接触面の摩耗形態遷移臨界圧力に関する研究,  Thesis,  Doctor of Engineering,  Tokyo Institute of Technology,  2001/--/--, 

[ Save as BibTeX ]    [ Paper, Presentations, Books, Others, Degrees: Save as CSV ]    [ Patents: Save as CSV ]