|
Publication List - Yasunori Sakai (54 entries)
Journal Paper
-
Yasunori Sakai,
Ryo Kinouchi,
Yuta Toki,
Tomohisa Tanaka.
Novel non-traditional mechanical drilling process with squeeze motion,
Materials Letters,
Vol. 285,
129444,
Apr. 2021.
-
Shigeru Aoki,
Yasunori Sakai,
Tomohisa Tanaka.
A Fundamental Experiment for Micro Ultrasonic Knurling Technology Creating High Precision Texture on Sliding Surface,
Information,
Vol. 23,
No. 3,
pp. 205-212,
Sept. 2020.
-
Shigeru Aoki,
Yasunori Sakai,
Tomohisa Tanaka.
Study on Application of Ultrasonic Vibration to Manufacturing (Examples of Application and Future Aspect),
Information,
Vol. 23,
No. 1,
pp. 25-32,
Mar. 2020.
-
Yasunori Sakai,
田中 智久.
工作機械の動剛性に影響する転がり案内の振動特性の評価,
トライボロジスト,
一般社団法人 日本トライボロジー学会,
Vol. 62,
No. 9,
pp. 566-574,
2017.
-
Yasunori SAKAI,
Tomohisa TANAKA,
Hayato YOSHIOKA,
Jiang ZHU,
Masaomi TSUTSUMI,
Yoshio SAITO.
Influence of nonlinear spring behavior of friction on dynamic characteristics of a rolling guideway,
Journal of Advanced Mechanical Design, Systems, and Manufacturing,
The Japan Society of Mechanical Engineers,
Vol. 9,
No. 1,
pp. 1-15,
Jan. 2015.
-
Yasunori Sakai,
TOMOHISA TANAKA,
Masaomi Tsutsumi.
Influence of the Excitation Force Amplitude on Vibration Characteristics of a Linear Rolling Bearing,
Journal of the Japan Society for Precision Engineering,
Vol. 80,
No. 8,
pp. 783-791,
Aug. 2014.
-
Yasunori Sakai,
Masaomi Tsutsumi.
Dynamic Characteristics of Linear Rolling Bearings for Machine Tools,
Journal of Machine Engineering,
Vol. 13,
No. 3,
pp. 129-142,
Dec. 2013.
-
Shigeru Aoki,
Yasunori Sakai.
Analysis on Steady-State Asymmetric Impact Vibration of Continuous System with Hysteresis Loop Characteristic,
Advancies in Vibration Engineering,
Vol. 12,
No. 2,
pp. 143-156,
Mar. 2013.
-
Yasunori sakai,
masaomi tsutsumi.
Quantitative evaluation method for damping capacity of linear rolling bearings for feed drive mechanisms,
Key Egineering Materials (Emerging Technology in Precision Engineering XIV),
Vol. 523 - 524,
pp. 656-661,
Nov. 2012.
-
Yasunori Sakai,
Masaomi Tsutsumi.
Resonance Frequency of Carriages for Linear Roller Guides,
Journal of the Japan Society for Precision Engineering,
The Japan Society for Precision Engineering,
Vol. 78,
No. 7,
pp. 599-604,
July 2012.
-
Shigeru Aoki,
Yasunori Sakai.
Analysis of Stationary Impact Vibration in Continuous System with Asymmetrical Hysteresis Loop Characteristics,
Transactions of the Japan Society of Mechanical Engineers,
The Japan Society of Mechanical Engineers,
Vol. 76,
No. 767,
pp. 1692-1699,
July 2010.
International Conference (Reviewed)
-
Yasunori Sakai,
So Fukasawa,
Jiang Zhu,
Hayato Yoshioka,
Tomohisa Tanaka,
Kaoru Hoshide,
Ryuji Furusawa.
Influence of Designing Parameters on Vibration Damping of Rolling Guideway,
16th International Conference on Precision Engineering,
Proceeding of 16th International Conference on Precision Engineering,
The Japan Society for Precision Engineering,
Nov. 2016.
-
Yasunori Sakai,
Jiang, Z.,
Hayato Yoshioka,
Tanaka, T..
New identification method for dynamic characteristics of roller guideway based on finite element model,
Proceedings - ASPE 2015 Annual Meeting,
pp. 357-362,
2015.
-
Yasunori SAKAI,
Jiang Zhu,
Tomohisa Tanaka,
Hayato Yoshioka,
Yoshio Saito.
Influence of Hysteresis Behavior of Friction on Dynamic Characteristics of Rolling Guideway,
MECHATRONICS 2014,
Proceedings of MECHATRONICS 2014,
No. OS-000671,
Nov. 2014.
-
Yasunori Sakai,
Masaomi Tsutsumi.
Study on Method for Evaluating Damping Capacity of Linear Rolling Bearing,
The 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Proceeding of the 7th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Nov. 2013.
-
yasunori sakai,
masaomi tsutsumi.
Resonance Frequency of Carriages for Linear Roller Guides,
The 6th International Conference on Leading Edge Manufacturing in 21st Century(LEM 21),
Proceeding of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
Nov. 2011.
Domestic Conference (Reviewed)
International Conference (Not reviewed / Unknown)
-
Chenyao Cao,
JIANG ZHU,
TOMOHISA TANAKA,
Yasunori Sakai.
Modification of Metal Structure Based on Burnishing Processing,
the 18th International Machine Tool Engineers` Conference,
Proceeding of the 18th International Machine Tool Engineers' Conference,
Japan Machine Tool Builders' Association,
pp. 30-31,
Nov. 2018.
-
Shunnya Kobayashi,
Yasunori Sakai,
TOMOHISA TANAKA,
JIANG ZHU.
Development of Structure Integrated Passive Damper (P-DACS),
the 18th International Machine Tool Engineers` Conference,
Proceeding of the 18th International Machine Tool Engineers' Conference,
Japan Machine Tool Builders' Association,
pp. 18-19,
Nov. 2018.
-
Hayato Yoshioka,
Jiang Zhu,
Toshiki Hanaoka,
Yasunori Sakai.
Influence of angular error in multi-axis machine tool on estimation of Machining force by disturbance observer,
the 17th International Machine Tool Engineers` Conference,
Proceedings of the 17th International Machine Tool Engineers` Conference,
Japan Machine Tool Builders' Association,
pp. 132-133,
Nov. 2016.
-
Yasunori Sakai,
JIANG ZHU,
TOMOHISA TANAKA,
Hayato Yoshioka,
YOSHIO SAITO.
Influence of Excitation Force on Damping of Rolling Guideway in Feed and Pitch Direction,
the 16th International Machine Tool Engineers` Conference,
Proceeding of the 16th International Machine Tool Engineers` Conference,
Japan Machine Tool Builders' Association,
Nov. 2014.
Domestic Conference (Not reviewed / Unknown)
-
青木 繁,
Yasunori Sakai,
TOMOHISA TANAKA,
Shihao Liu.
高精度テクスチャを創生する超音波応用転写加工技術の開発:(基礎的実験),
Dynamics & Design Conference 2019,
Aug. 2019.
-
Chenyao Cao,
JIANG ZHU,
TOMOHISA TANAKA,
Yasunori Sakai.
Influence of processing condition on surface modification effect of Mg alloys by ball burnishing process,
2019年度精密工学会春季大会学術講演会,
2019年度精密工学会春季大会学術講演会講演論文集,
公益社団法人 精密工学会,
Mar. 2019.
-
青木 繁,
Yasunori Sakai,
TOMOHISA TANAKA.
超音波振動応用加工例と塑性加工への応用の展望,
北陸信越支部総会・講演会,
Mar. 2019.
-
Yasunori Sakai,
TOMOHISA TANAKA,
Shunnya Kobayashi,
JIANG ZHU.
異方剛性設計を施したパッシブダンパP-DACSを内包する構造物の振動応答,
日本機械学会 生産システム部門研究発表講演会2019,
日本機械学会,
Mar. 2019.
-
Jingyou Wu,
TOMOHISA TANAKA,
JIANG ZHU,
Yasunori Sakai.
Laser coloring on titanium by controlling oxide film formation mode,
2018年度精密工学会春季大会学術講演会,
2018年度精密工学会春季大会学術講演会講演論文集,
公益社団法人 精密工学会,
Mar. 2018.
-
Takumi Kobayashi,
Yasunori Sakai,
TOMOHISA TANAKA,
JIANG ZHU.
Influence of geometrical parameters of passive-damper with anisotropic composite structure (P-DACS) on its dynamical characteristics,
2018年度精密工学会春季大会学術講演会,
2018年度精密工学会春季大会学術講演会講演論文集,
公益社団法人 精密工学会,
Mar. 2018.
-
Yasunori Sakai,
TOMOHISA TANAKA,
JIANG ZHU.
金属と高分子を複合 した異方構造を有す るパッシブダンパ (P-DACS)の制振 性能に及ぼすダンパ 形状及び高分子物性 の影響,
2017年度精密工学会春季大会学術講演会,
2017年度精密工学会春季大会学術講演会講演論文集,
公益社団法人 精密工学会,
Mar. 2017.
-
Satoshi Inoue,
Yasunori Sakai,
TOMOHISA TANAKA,
Hayato Yoshioka,
JIANG ZHU,
星出薫,
古澤竜二.
Elucidation of Contact State of Rolling Elements Used for Carriage of Rolling Guideway in Static State,
2017年度精密工学会春季大会学術講演会,
2017年度精密工学会春季大会学術講演会講演論文集,
公益社団法人 精密工学会,
Mar. 2017.
-
Yasunori Sakai,
TOMOHISA TANAKA,
JIANG ZHU.
Influence of filler condition on damping capacity of synthetic resin,
第11回日本機械学会生産加工・工作機械部門講演会,
第11回生産加工・工作機械部門講演会 講演論文集,
日本機械学会,
pp. 137-138,
Oct. 2016.
-
Leandro Batista Da Silva,
Yasunori Sakai,
JIANG ZHU,
Hayato Yoshioka.
Influence of Machining Conditions on Cut Quality of Laser Diced SiC Wafer,
日本機械学会関東支部第22期総会講演会,
日本機械学会関東支部第22期総会講演会講演論文集,
日本機械学会,
No. 160-1,
Mar. 2016.
-
Yasunori Sakai,
Sou Fukasawa,
JIANG ZHU,
Hayato Yoshioka,
TOMOHISA TANAKA,
星出 薫,
古澤竜二.
Development of Measuring Apparatus for Contact Damping of Rolling Guideway,
日本機械学会関東支部第22期総会講演会,
日本機械学会関東支部第22期総会講演会講演論文集,
日本機械学会,
No. 160-1,
Mar. 2016.
-
Sou Fukasawa,
Yasunori Sakai,
JIANG ZHU,
Hayato Yoshioka,
TOMOHISA TANAKA,
星出 薫,
古澤竜二.
Influence of Contact Condition of Rolling Elements on Damping Characteristics of Rolling Guideway,
日本機械学会関東支部第22期総会講演会,
日本機械学会関東支部第22期総会講演会講演論文集,
日本機械学会,
No. 160-1,
Mar. 2016.
-
Yasunori Sakai,
JIANG ZHU,
Hayato Yoshioka,
TOMOHISA TANAKA.
Influence of Lubricating oil on nonlinear frequency response characteristic of rolling guideway,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
精密工学会,
pp. 739-740,
Mar. 2016.
-
Toshiki Hanaoka,
JIANG ZHU,
Hayato Yoshioka,
Yasunori Sakai.
Influence from vibration characteristic of multi-tasking machine for cutting force estimation with disturbance observer,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
精密工学会,
pp. 761-762,
Mar. 2016.
-
Yasunori Sakai,
JIANG ZHU,
Hayato Yoshioka,
TOMOHISA TANAKA.
有限要素法を用いたローラガイドの鉛直及び横方向剛性の同定,
日本機械学会2015年度年次大会,
Sept. 2015.
-
Yasunori Sakai,
Hayato Yoshioka,
Jiang Zhu,
Yoshio Saito,
Tomohisa Tanaka.
Analysis of Nonlinear Friction Induced Vibration of Rolling Guideway by Using Complex Spring,
Spring Annual Meeting of the Japan Society for Procession Engineering 2015,
Proceeding of Spring Annual Meeting of the Japan Society for Procession Engineering 2015,
The Japan Society of Precision Engineering,
pp. 351-352,
Mar. 2015.
-
Yasunori Sakai,
JIANG ZHU,
田中智久,
Hayato Yoshioka,
YOSHIO SAITO.
Influence of friction in pre-rolling region on dynamic characteristics of a rolling guideway,
第10回 日本機械学会生産加工・工作機械部門講演会,
pp. 97-98,
Nov. 2014.
-
Yasunori Sakai,
Toshiki Hanaoka,
JIANG ZHU,
YOSHIO SAITO,
TOMOHISA TANAKA.
加振力振幅が直動転がり案内の動特性に及ぼす影響,
2014年度精密工学会春季大会学術講演会,
2014年度精密工学会春季大会学術講演会講演論文集,
Mar. 2014.
-
Yasunori Sakai,
堤正臣.
直動ローラ軸受の振動減衰能評価方法に関する研究,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会講演論文集,
Mar. 2013.
-
Yasunori Sakai,
堤正臣.
リニアローラガイド用キャリッジの固有振動解析と減衰能評価,
Dynamics and Design Conference 2012,
Dynamics and Design Conference 2012 CD-ROM講演論文集,
Sept. 2012.
-
Yasunori Sakai.
直動案内の振動とその評価,
日本技術士会 機械部会3月度講演会,
Mar. 2012.
-
Yasunori Sakai,
堤正臣.
直動転がり案内の減衰能評価方法に関する研究,
2012年度精密工学会春季大会学術講演会,
2012年度精密工学会春季大会学術講演会講演論文集,
Mar. 2012.
-
Yasunori Sakai.
直動ローラ案内の製品管理と振動利用技術,
第15回産学研究交流会(日本工作機器工業会),
Dec. 2011.
-
Shigeru Aoki,
Yasunori Sakai.
Analysis of Impact Absorber with Hysteresis Damping,
日本機械学会関東支部第16期総会講演会,
日本機械学会関東支部第16期総会講演会講演論文集,
The Japan Society of Mechanical Engineers,
pp. 193-194,
Mar. 2010.
-
Shigeru Aoki,
Yasunori Sakai.
Analysis of Impact Vibration in Continuous System : Stabilities for the Fourier series method solution,
日本機械学会関東支部ブロック合同講演会2009,
日本機械学会関東支部ブロック合同講演会講演論文集,
The Japan Society of Mechanical Engineers,
pp. 73-74,
Sept. 2009.
-
Shigeru Aoki,
Yasunori Sakai.
Analysis of Impact Vibration in Cantilever Beam System,
日本機械学会関東支部総会講演会講演論文集,
日本機械学会関東支部総会講演会講演論文集 2009,
The Japan Society of Mechanical Engineers,
No. 15,
pp. 293-294,
Feb. 2009.
Other Publication
Patent
Degree
-
Prediction Method for Dynamic Characteristics of Rolling Guideways considering Nonlinear Behavior of Friction,
Summary,
博士(工学),
Tokyo Institute of Technology,
2015/09/25,
-
Prediction Method for Dynamic Characteristics of Rolling Guideways considering Nonlinear Behavior of Friction,
Exam Summary,
博士(工学),
Tokyo Institute of Technology,
2015/09/25,
-
Prediction Method for Dynamic Characteristics of Rolling Guideways considering Nonlinear Behavior of Friction,
Thesis,
博士(工学),
Tokyo Institute of Technology,
2015/09/25,
-
Prediction Method for Dynamic Characteristics of Rolling Guideways considering Nonlinear Behavior of Friction,
Outline,
博士(工学),
Tokyo Institute of Technology,
2015/09/25,
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|