Journal Paper

• Han Jinwoo, Yu Sekiguchi, Kazumasa Shimamoto, Haruhisa Akiyama, Chiaki Sato. Direct Measurement of the Diffusion Coefficient of Adhesives from Moisture Distribution in Adhesive Layers Using Near-Infrared Spectroscopy, ACS Applied Materials & Interfaces, ACS Publications, Vol. 16, Issue 40, pp. 54610-54626, Sept. 2024.  Official location  
• Shinya Iizuka, Yu Sekiguchi, Chiaki Sato. Measurement of the water vapor transmission rate at temperatures above 100 °C, The Journal of Adhesion, Taylor & Francis, Online first version, Aug. 2024.  Official location  
• Jin Woo Han, Yu Sekiguchi, Kazumasa Shimamoto, Haruhisa Akiyama, Chiaki Sato. Experimental investigation of moisture penetration in adhesive layers under varying bonding conditions using near-infrared spectroscopy, International Journal of Adhesion and Adhesives, Elsevier, Vol. 134, 103792, July 2024.  Official location  
• Keiji Houjou, Kazumasa Shimamoto, Haruhisa Akiyama, Yu Sekiguchi, Chiaki Sato. Analytical Calculation of Relationship Temperature and Fatigue and Creep Strength Based on Thermal Activation, Materials, MDPI, Vol. 17, Issue 13, 3055, June 2024.  Official location  
• Ming Ji, Chao Kang, Yu Sekiguchi, Masanobu Naito, Chiaki Sato. Spectral collocation method for free vibration of sandwich plates containing a viscoelastic core, Composite Structures, Elsevier, Vol. 337, 118024, Mar. 2024.  Official location  
• Akihiro Maesaka, Yushin Kakei, Tsutomu Osaka, Yoshihiro Kudo, Yu Sekiguchi, Chiaki Sato. Experimental approach for measuring the peeling strength of a sheet bonded on a curved adherend with pressure sensitive adhesive and predicting the peeling resistance by finite element analysis, The Journal of Adhesion, Taylor & Francis, Vol. 100, No. 16, pp. 1554-1569, Mar. 2024.  Official location  
• Chao Kang, Ming Ji, Yu Sekiguchi, Masanobu Naito, Chiaki Sato. A high-throughput technique to evaluate the probability distribution of strength of adhesively bonded joints after moisture absorption, The Journal of Adhesion, Taylor & Francis, Online first version, Oct. 2023.  Official location  
• Akari Takahashi, Yu Sekiguchi, Nobuhiro Taki, Masahiro Okamura, Chiaki Sato. Analyzing Deformation of a Cationic Photopolymerized Epoxy Adhesive during the Curing Process in UV Irradiation and Dark Reaction based on Finite Element Method and Measurement, The Journal of Adhesion, Taylor & Francis, Vol. 100, Issue 7, pp. 599-615, July 2023.  Official location  
• Tatsuro Kimura, Ming Ji, Ryu Onodera, Yu Sekiguchi, Chiaki Sato. Inverse Design of Composite Xylophone Beams Using Finite Element based Machine Learning, The first International Conference on Durability, Repair and Maintenance of Structures (DRMS2023), Discover Mechanical Engineering, Springer, Vol. 2, 12, July 2023.  Official location  
• Jin-Woo Han, Yu Sekiguchi, Kazumasa Shimamoto, Haruhisa Akiyama, Chiaki Sato. Experimental measurement of moisture distribution in the adhesive layer using near-infrared spectroscopy, Journal of Applied Polymer Science, Wiley, Vol. 140, Issue 25, e53982, Apr. 2023.  Official location  
• Ryu Onodera, Tatsuro Kimura, Yu Sekiguchi, Chiaki Sato. Estimation of thickness and Young's modulus of adhesive layer in adhesively bonded joint by impact sound, Journal of The Adhesion Society of Japan, The Adhesion Society of Japan, Vol. 59, No. 4, pp. 104-110, Apr. 2023.
• Runa Okumura, Kazumasa Shimamoto, Yu Sekiguchi, Kazushi Kimura, Hirokazu Kageyama, Yutaro Yamamoto, Yuichi Matsuki, Chiaki Sato. Effects of low temperatures and high strain rates on the tensile properties of polyurethane polymers for adhesives, The Journal of Adhesion, Taylor & Francis, Vol. 99, No. 15, pp. 2238-2259, Mar. 2023.  Official location  
• Chao Kang, J. J. M. Machado, Yu Sekiguchi, Ming Ji, Chiaki Sato, Masanobu Naito. A butt shear joint (BSJ) specimen for high throughput testing of adhesive bonds, The Journal of Adhesion, Taylor & Francis, Vol. 99, Issue 14, pp. 2080-2096, Feb. 2023.  Official location  
• Kota Nakamura, Yu Sekiguchi, Kazumasa Shimamoto, Keiji Houjou, Haruhisa Akiyama, Chiaki Sato. Creep Crack Growth Behavior during Hot Water Immersion of an Epoxy Adhesive Using a Spring-Loaded Double Cantilever Beam Test Method, Materials, MDPI, Vol. 16, Issue 2, 607, Jan. 2023.  Official location  
• Ming Ji, Yu Sekiguchi, Kazuaki Inaba, Masanobu Naito, Chiaki Sato. Forward and inverse analysis of transient responses for a cantilevered rectangular plate under normal and oblique impact loadings, International Journal of Impact Engineering, Elsevier, Vol. 174, 104514, Jan. 2023.  Official location  
• Yu Sekiguchi, Keiji Houjou, Kazumasa Shimamoto, Chiaki Sato. Two-parameter analysis of fatigue crack growth behavior in structural acrylic adhesive joints, Fatigue & Fracture of Engineering Materials & Structures, Wiley, Vol. 46, Issue 3, pp. 909-923, Nov. 2022.  Official location  
• Keiji Houjou, Yu Sekiguchi, Kazumasa Shimamoto, Haruhisa Akiyama, Chiaki Sato. Energy release rate and crack propagation rate behaviour of moisture-deteriorated epoxy adhesives through the double cantilever beam method, The Journal of Adhesion, Taylor & Francis, Vol. 99, Issue 6, pp. 1016-1030, May 2022.  Official location  
• Wei-Hsun Hu, Ming JI, Ta-Te Chen, Siqian Wang, Mizuki Tenjimbayashi, Yu Sekiguchi, Ikumu Watanabe, Chiaki Sato, Masanobu Naito. Light-Induced Topological Patterning toward 3D Shape-Reconfigurable Origami, small, Wiley, Vol. 18, Issue 14, 2107078, Feb. 2022.  Official location  
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. Effect of temperature and loading rate on the mode I fracture energy of structural acrylic adhesives, Journal of Advanced Joining Processes, Elsevier, Vol. 5, 100079, Nov. 2021.  Official location  
• Akari Takahashi, Yu Sekiguchi, CHIAKI SATO. Volume Change and Viscoelastic Properties of UV-curable Adhesives for Precise Positioning during Curing Process and Their Formulation, The Journal of Adhesion, Taylor & Francis, Vol. 98, No. 13, pp. 2029-2044, July 2021.  Official location  
• Yu Sekiguchi, Chiaki Sato. Effect of Bond-Line Thickness on Fatigue Crack Growth of Structural Acrylic Adhesive Joints, Materials, MDPI, Vol. 14, Issue 7, 1723, Mar. 2021.  Official location  
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. AFM observation of sea-island structure formed by second generation acrylic adhesive, The Journal of Adhesion, Taylor & Francis, Vol. 97, No. 2, pp. 155-171, Jan. 2021.  Official location  
• Yu Sekiguchi, Chiaki Sato. Experimental investigation of the effects of adhesive thickness on the fracture behavior of structural acrylic adhesive joints under various loading rates, International Journal of Adhesion and Adhesives, Elsevier, Vol. 105, 102782, Dec. 2020.  Official location  
• Yu Sekiguchi. Cohesive Zone Model (CZM) for numerical analysis: A review, Journal of the Adhesion society of Japan, The Adhesion Society of Japan, Vol. 56, No. 11, pp. 447-455, Nov. 2020.  Official location  
• Asuka Hayashi, Yu Sekiguchi, Kosuke Haraga, Chiaki Sato. Adhesive joint mechanical properties and sea-island structure using a second-generation acrylic adhesive under different curing temperature condition, Journal of the Adhesion society of Japan, The Adhesion Society of Japan, Vol. 56, No. 8, pp. 296-302, Aug. 2020.  Official location  
• Yu Sekiguchi, Asuka Hayashi, Chiaki Sato. Analytical determination of adhesive layer deformation for adhesively bonded double cantilever beam test considering elastic–plastic deformation, The Journal of Adhesion, Taylor & Francis, Volume 96, Issue 7, pp. 647-664, Apr. 2020.  Official location  
• Yu Sekiguchi, Minori Nakanouchi, Kosuke Haraga, Ippei Takasaki, Chiaki Sato. Experimental investigation on strength of stepwise tailored single lap adhesive joint using second-generation acrylic adhesive via shear and low-cycle shear tests, International Journal of Adhesion and Adhesives, Elsevier, Vol. 95, 102438, Sept. 2019.  Official location  
• Katsuo Komatsu, Yu Sekiguchi, Ryohei Ihara, Akihiko Tatsumi, Chiaki Sato. Experimental investigation of an adhesive fracture energy measurement by preventing plastic deformation of substrates in a double cantilever beam test, The Journal of Adhesion, Talor & Francis, Vol. 95, No. 10, pp. 911-928, July 2019.
• Yu Sekiguchi, Ryo Sakakibara, Chiaki Sato. Buckling analysis of a beam on an elastic foundation considering initial imperfection, Journal of the Adhesion Society of Japan, The Adhesion Society of Japan, Vol. 55, No. 7, pp. 254-265, July 2019.  Official location  
• Yu Sekiguchi. Study on the reversible adhesion inspired from gecko foot hairs, Journal of the Adhesion society of Japan, The Adhesion Society of Japan, Vol. 55, No. 2, pp. 50-56, Feb. 2019.  Official location  
• Minori Nakanouchi, Chiaki Sato, Yu Sekiguchi, Kosuke HARAGA, Hiroki Uno. Development of application method for fabricating functionally graded adhesive joints by two-component acrylic adhesives with different elastic moduli, The Journal of Adhesion, Talor & Francis, Vol. 95, pp. 529-542, Feb. 2019.  Official location  
• Norihide Abe, Yu Sekiguchi, Chiaki Sato. Parameter identification of material model of toughened adhesive polymer for elasto-plastic finite element analysis, Journal of the Adhesion Society of Japan, The Adhesion Society of Japan, Vol. 54, No. 10, pp. 358-366, Oct. 2018.  Official location  
• Yu Sekiguchi, Yuki Yamagata, Chiaki Sato. Mode I fracture energy of adhesive joints bonded with adhesives with different characteristics under quasi-static and impact loading, Journal of the Adhesion society of Japan, The Adhesion Society of Japan, Vol. 53, No. 10, pp. 330-337, Oct. 2017.  Official location  
• Shota Kawasaki, Yu Sekiguchi, Gosuke Nakajima, Kosuke Haraga, Chiaki Sato. Digital Image Correlation measuring of strain and stress distribution on mixed adhesive joints bonded by honeymoon adhesion using two types of second-generation acrylic adhesives of two components, Journal of the Adhesion Society of Japan, The Adhesion Society of Japan, Vol. 53, No. 6, pp. 192-201, June 2017.  Official location  
• Hidenao Shiote, Yu Sekiguchi, Manabu Ohe, Chiaki Sato. Influence of adhesion area, applied voltage, and adherend materials on residual strength of joints bonded with electrically dismantlable adhesive, The Journal of Adhesion, Taylor & Francis, Vol. 93, No. 10, pp. 831-854, Mar. 2017.  Official location  
• Yoshiaki Uratani, Yu Sekiguchi, Chiaki Sato. Expansion characteristics of thermally expandable microcapsules for dismantlable adhesive under hydrostatic pressure or in resin, The Journal of Adhesion, Taylor & Francis, Vol. 93, No. 10, pp. 771-790, Mar. 2017.  Official location  
• Yu Sekiguchi, Chiaki Sato. Experimental investigation of the effect of tip shape in gecko-inspired adhesive devices under asymmetric detachment, Applied Adhesion Science, SpringerOpen, 5, 8, Mar. 2017.  Official location  
• Yuki Yamagata, Xi Lu, Yu Sekiguchi, Chiaki Sato. Experimental investigation of mode I fracture energy of adhesively bonded joints under impact loading conditions, The 6th Asian Conference on Adhesion (ACA2016), Applied Adhesion Science, Springer Open, Vol. 5, 7, Feb. 2017.  Official location  
• Kazumasa Shimamoto, Yu Sekiguchi, Chiaki Sato. Mixed mode fracture toughness of adhesively bonded joints with residual stress, International Journal of Solids and Structures, Elsevier, Volume 102-103, pp. 120-126, Dec. 2016.  Official location  
• Kazumasa Shimamoto, Yu Sekiguchi, Chiaki Sato. The critical energy release rate of welded joints between fiber-reinforced thermoplastics and metals when thermal residual stress is considered, The Journal of Adhesion, Taylor & Francis, Vol. 92, pp. 306-318, Dec. 2015.  Official location  
• Kazumasa Shimamoto, Yu Sekiguchi, Chiaki Sato. Effects of surface treatment on the critical energy release rates of welded joints between glass fiber reinforced polypropylene and a metal, International Journal of Adhesion and Adhesives, Elsevier, Vol. 67, pp. 31-37, Dec. 2015.  Official location  
• Sho Murakami, Yu Sekiguchi, Chiaki Sato, E Yokoi, T Furusawa. Strength of cylindrical butt joints bonded with epoxy adhesives under combined static or high-rate loading, International Journal of Adhesion and Adhesives, Elsevier, Vol. 67, pp. 86-93, Dec. 2015.  Official location  
• Yu Sekiguchi, Kunio Takahashi, Chiaki Sato. Adhesion mechanism of a gecko-inspired oblique structure with an adhesive tip for asymmetric detachment, Journal of physics D : applied physics, IOP Science, Volume 48, Number 47, 475301, Oct. 2015.  Official location  
• Kazumasa Shimamoto, Yu Sekiguchi, CHIAKI SATO. Thermal stress reduction and strength evaluation of welded joints for dissimilar materials, Journal of the Adhesion Society of Japan, 一般社団法人 日本接着学会, Vol. 51, No. 9, pp. 409-415, Sept. 2015.  Official location  
• Yu Sekiguchi, masato katano, chiaki sato. Experimental study of the Mode I adhesive fracture energy in DCB specimens bonded with a polyurethane adhesive, The Journal of Adhesion, Taylor & Francis, Vol. 93, No. 3, pp. 235-255, Aug. 2015.  Official location  
• Binti Ramli Mizah, Yu Sekiguchi, Chiaki Sato. Novel method to measure the creep strength of adhesively bonded butt joints subjected to constant loading using a hydro-pneumatic testing machine, The Journal of Adhesion, Taylor & Francis, Vol. 92, page 65-79, Aug. 2015.  Official location  
• Yu Sekiguchi, shigeki saito, kunio takahashi, chiaki sato. Flexibility and Poisson effect on detachment of gecko-inspired adhesives, International Journal of Adhesion and Adhesives, Elsevier, Volume 62, Page 55-62, July 2015.  Official location  
• Siripong Mahaphasukwat, Kazumasa Shimamoto, Shota Hayashida, Yu Sekiguchi, CHIAKI SATO. Mode I critical fracture energy of adhesively bonded joints between glass fiber reinforced thermoplastics, Applied Adhesion Science, SpringerOpen, Volume 3, 4, Mar. 2015.  Official location  
• Masaru Sano, Hiroyuki Oguma, Masahiro Sekine, Yu Sekiguchi, CHIAKI SATO. High-frequency welding of glass–fibre-reinforced polypropylene with a thermoplastic adhesive layer: Effects of ceramic type and long-term exposure on lap shear strength, International Journal of Adhesion and Adhesives, Elsevier, Volume 59, Page 7-13, Feb. 2015.  Official location  
• PASOMPHONE HEMTHAVY, Takehiko Yazaki, Boqing Wang, Yu Sekiguchi, KUNIO TAKAHASHI. Effect of sape of elastic beam hair on its adhesion with wavy surfaces, IOP Conference Series: Materials Science and Engineering, IOPScience, Volume 61, 012043, Aug. 2014.  Official location  
• Yu Sekiguchi, PASOMPHONE HEMTHAVY, Shigeki SAITO, KUNIO TAKAHASHI. Experiments of the adhesion behavior between an elastic beam and a substrate, International Journal of Adhesion and Adhesives, Vol. 49, pp. 1-6, Mar. 2014.  Official location  
• Y Sekiguchi, P Hemthavy, S Saito, K Takahashi. Separation mechanisms of reversible adhesive joining using an elastic body with variable elastic modulus, Journal of Physics: Conference Series, Volume 379, 012041, Aug. 2012.  Official location  
• Y Honda, M Tanaka, Y Sekiguchi, P Hemthavy, Kunio Takahashi. Optimum condition of boost switching regulator for charging tiny electric energy to capacitor, Journal of Physics: Conference Series, IOP Publishing, Volume 379, pp. 1-5, Aug. 2012.  Official location  
• Yu Sekiguchi, PASOMPHONE HEMTHAVY, Shigeki SAITO, KUNIO TAKAHASHI. Adhesion between side surface of an elastic beam and flat surface of a rigid body, Journal of Adhesion Science and Technology, Vol. 26, No. 23, 2615-2626, Aug. 2012.  Official location  
• Y. Sekiguchi, L. Lei, P. Hemthavy, K. Takahashi. Mechanisms for Grip-and-Release Process of Adhesion Contact Using Material with Variable Elastic Modulus, Journal of Adhesion Science and Technology, Volume 24, Number 11-12, pp. 1819-1830, Sept. 2010.  Official location  

International Conference (Reviewed)

• Ming Ji, Yu Sekiguchi, Masanobu Naito, Chiaki Sato. Investigations on Vibroacoustic Characteristics of Sandwich Plates With Viscoelastic Core Using Coupled FE-BE Method, ASME 2023 Pressure Vessels & Piping Conference, Nov. 2023.  Official location  
• Akari Takahashi, Yu Sekiguchi, CHIAKI SATO. Shrinkage and viscoelastic properties of UV-curable adhesives for precise positioning during curing process, International Conference on Materials Design and Applications, July 2022.
• Yu Sekiguchi, Chiaki Sato. Effect of detachment speed on adhesion strength of gecko inspired adhesive devices, The 9th International Symposium on Impact Engineering (ISIE2016), Key Engineering Materials, Trans Tech Publications, Vol. 715, pp. 63-67, Sept. 2016.
• Y. Sekiguchi, P. Hemthavy, S. Saito, K. Takahashi. Possibility of Reversible Adhesive Joining Using an Elastic Body with Variable Elastic Modulus, ECO-MATES 2011, Proceeding of ECO-MATES 2011, Volume 1, pp. 177-178, Nov. 2011.  Official location  
• Y. Honda, M. Tanaka, Y. Sekiguchi, P. Hemthavy, K. Takahashi. Optimum Duty Ratio of Boost Switching Regulator for Charging Tiny Electric Energy to Capacitor, International Symposium on Materials Science and Innovation for Sustainable Society --- Eco-Materials and Eco-Innovation for Global Sustainability --- The 21st Iketani Conference 2011, Proceeding of ECO-MATES 2011, Joining and Welding Research Institute, Osaka University, Volume 1, pp. 85-86, Nov. 2011.
• Y.Sekiguchi, L.Lei, P.Hemthavy, K.Takahashi. Mechanisms for adhesive grip-and-release using material with variable elasic modulus, Proceedings of The 3rd International Conference on Advanced Computational Engineering and Experimenting, p. 75, June 2009.

International Conference (Not reviewed / Unknown)

• Kota Nakamura, Yu Sekiguchi, Chiaki Sato, Kazumasa Shimamoto, Keiji Houjou, Haruhisa Akiyama. Critical energy release rate of adhesively bonded joints under hot-wet and continuous loading conditions, Adhesion2022, Sept. 2022.
• Minori Nakanouchi, T Yajima, K Haraga, H Uno, Yu Sekiguchi, Chiaki Sato. Residual stress determination in SGA layer caused in curing process, 14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, Sept. 2019.
• Yu Sekiguchi, Chiaki Sato. Surface treatment ofhigh tensile strength steel with gas-free atmospheric-pressure plasma for welding of thermoplastics, 14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, Sept. 2019.
• Noriaki Okada, Yu Sekiguchi, Chiaki Sato. Thermal buckling of hybrid joints with adhesive and mechanical fasteners, 14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, Sept. 2019.
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. Experimental investigation of curing condition effect on adhesive joints bonded with second generation acrylic adhesives, 14th International Triennial Conference on the Science and Technology of Adhesion and Adhesives, Sept. 2019.
• Nei Ga, Chiaki Sato, Yu Sekiguchi. Thermal deformation of dissimilar materials bonded adhesively, 12th European Adhesion Conference (EURADH2018), Book of abstracts of the 12th European Adhesion Conference (EURADH2018), p. 145, Sept. 2018.
• Chiaki Sato, Asuka Hayashi, Yu Sekiguchi. Impact deformation of adhesive layer measured with tensile split-hopkinson bar apparatus, 12th European Adhesion Conference (EURADH2018), Book of abstracts of the 12th European Adhesion Conference (EURADH2018), p. 200, Sept. 2018.
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. Observation of phase separation structure in adhesive, 12th European Adhesion Conference (EURADH2018), Book of abstracts of the 12th European Adhesion Conference (EURADH2018), pp. 136-137, Sept. 2018.
• Katsuo Komatsu, Yu Sekiguchi, Chiaki Sato. Mode I energy release rate measurement for low bending stiffness adherend bonded with a high toughened adhesive, 6th World Congress on Adhesion and Related Phenomena (WCARP), in conjunction with 41th Annual Meeting of the Adhesion Society, Feb. 2018.
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. An experimental evaluation of Mode I fracture energy of adhesive joint by DCB test, 6th World Congress on Adhesion and Related Phenomena (WCARP), in conjunction with 41th Annual Meeting of the Adhesion Society, Feb. 2018.
• Norihide Abe, Yu Sekiguchi, Chiaki Sato. Deformation of constitutive equation of an adhesive for car body structure, 6th World Congress on Adhesion and Related Phenomena (WCARP), in conjunction with 41th Annual Meeting of the Adhesion Society, Feb. 2018.
• Yu Sekiguchi, Chiaki Sato. Possibility of manipulation with gecko-inspired reversible adhesives, 19th International Conference on Electronics Materials and Packaging (EMAP2017), Sept. 2017.
• Katsuo Komatsu, Yu Sekiguchi, Chiaki Sato. Mode I energy release rate measurement for high tensile strength steel (HTSS) bonded with a high toughness adhesive, 4th International Conference on Structural Adhesive Bonding (AB2017), Book of abstracts 4th International Conference on Structural Adhesive Bonding, p. 54, July 2017.
• Yu Sekiguchi, Chiaki Sato. Surface curvature effect on adhesion of gecko inspired asymmetric adhesive devices, 4th International Conference on Structural Adhesive Bonding (AB2017), Book of abstracts 4th International Conference on Structural Adhesive Bonding, p. 73, July 2017.
• Norihide Abe, Yuki Yamagata, Yu Sekiguchi, Chiaki Sato. Constitutive relation of adhesive layer under combined loading conditions, JSME 2017 International Conference on Materials and Processing (ICMP2017), Proceedings of the JSME 2017 International Conference on Materials and Processing, ICMP2017-4418, June 2017.
• negishi teruaki, Yu Sekiguchi, haraga kosuke, chiaki sato. Thermal Deformation of Adhesively Bonded Joints of Dissimilar Materials, Eleventh European Adhesion Conference and Thirteenth International Triennial Conference on the Science and Technology of Adhesion and Adhesives (EURADHESION2016/ADHESION'16), Abstracts of EURADH2016 ADHESION '16 conference, IOM Communications Ltd, pp. 443-445, Sept. 2016.
• iwata hideyuki, Yu Sekiguchi, chiaki sato. Effect of cross-section shape of micro-pillar on anisotropic adhesive property, Eleventh European Adhesion Conference and Thirteenth International Triennial Conference on the Science and Technology of Adhesion and Adhesives (EURADHESION2016/ADHESION'16), Abstracts of EURADH2016 Adhesion '16 conference, IOM Communications Ltd, pp. 435-438, Sept. 2016.
• yuki kuranaga, toru ohnishi, Hiroshi Okamoto, Yu Sekiguchi, chiaki sato. Evaluation of Surface Treatment Methods for Adhesive bonding of Fiber Reinforced Polypropylene, 1st International Conference on Materials Design and Applications 2016, Book of abstracts of the 1st International Conference on Materials Design and Applications 2016, Publindústria, Produção de Comunicação, Lda., Page 37, June 2016.
• shota kawasaki, Yu Sekiguchi, Nakajima Gosuke, kosuke haraga, chiaki sato. Strain and stress field measurement in functionally graded adhesive joints bonded by honeymoon adhesion using two types of second generation acrylic adhesives, The 6th Asian Conference on Adhesion (ACA2016), Abstract of the 6th Asian Conference on Adhesion, pp. 23-24, June 2016.
• ramli mizah, teruaki negishi, Yu Sekiguchi, chiaki sato. Creep rupture of adhesively bonded butt joints subjected to variable loading, The 6th Asian Conference on Adhesion (ACA2016), Abstract of the 6th Asian Conference on Adhesion, The Adhesion Society of Japan, pp. 79-80, June 2016.
• Yu Sekiguchi, chiaki sato. Effect of tip structure on adhesion strength of gecko inspired adhesive devices, The 6th Asian Conference on Adhesion (ACA2016), Abstracts of the 6th Asian Conference on Adhesion, The Adhesion Society of Japan, pp. 87-88, June 2016.
• Yuki Yamagata, Yu Sekiguchi, Chiaki Sato. Strength of Joints Bonded with Polyurethane Adhesives under Static or High-Rate Conditions of Combined Loading, 1st international Conference on Materials Design and Applications 2016, Book of abstracts of the 1st international Conference on Materials Design and Applications 2016, Publindústria, Produção de Comunicação, Lda., Page 142, June 2016.
• Lu Xi, Yu Sekiguchi, Chiaki Sato. Experimental investigation of mode I fracture toughness of adhesives under impact loading conditions, 39th Annual Meeting, The Adhesion Society, Proceedings of 39th Annual Meeting, The Adhesion Society, Feb. 2016.
• toru ohnishi, Hiroshi Okamoto, kazumasa shimamoto, Masato Katano, chiaki sato, Yu Sekiguchi. EVALUATION OF SURFACE TREATMENT METHODS FOR PA6 FRP BONDING WITH ADHESIVES, 20th International Conference on Composite Materials ICCM20, ICCM20 Proceedings, July 2015.  Official location  
• Kazumasa Shimamoto, Yu Sekiguchi, Chiaki Sato. Strength of welded joints between FRTP and metal with thermal stress, 5th World Congress on Adhesion and Related Phenomena, Abstracts of 5th World Congress on Adhesion and Related Phenomena, The Adhesion Society of Japan, p. 218, Sept. 2014.
• Sho Murakami, H Hattori, Yu Sekiguchi, Chiaki Sato, T Furusawa, T Shimamiya, E Yokoi, K Sato. Constitutive relation of a thin adhesive layer subjected to high-rate combined loads, 5th World Congress on Adhesion and Related Phenomena, Abstracts of 5th World Congress on Adhesion and Related Phenomena, The Adhesion Society of Japan, p. 67, Sept. 2014.
• Masato Katano, Yu Sekiguchi, Chiaki Sato. Verification of thin DCB specimens for measurements of mode I fracture toughness, 5th World Congress on Adhesion and Related Phenomena, Abstracts of 5th World Congress on Adhesion and Related Phenomena, The Adhesion Society of Japan, p. 70, Sept. 2014.
• 服部 広基, 村上 翔, Yu Sekiguchi, 佐藤 千明. OS1704 接着接合部の低温における衝撃強度, M&M材料力学カンファレンス, 一般社団法人日本機械学会, Vol. 2014, pp. "OS1704-1"-"OS1704-2", July 2014.
• Chiaki Sato, Masato Katano, Yu Sekiguchi. Dynamic strength of joints bonded with acrylate adhesive, JSME 2014 International Conference on Materials and Processing (ICM&P2014), Proceedings of the JSME 2014 International Conference on Materials and Processing, ICMP2014-4994, June 2014.
• Kazuyoshi Seto, Yu Sekiguchi, Hiroshi Suto, Hayato Miyazaki, Kosuke Haraga, Chiaki Sato. Analytical prediction of bending stiffness of honeycomb sandwich panels bonded adhesively, 10th European Adhesion Conference, Proceedings of the Short Abstracts EURADH 2014 10th European Adhesion Conference, pp. 215-217, Apr. 2014.
• Sato, C., Yu Sekiguchi, Okamoto, H., Shimamoto, K., Katano, M., Naito, K., Kuratani, Y., Okayama, T., Takano, A., Hamaguchi, Y., Fukumoto, T., Furukawa, K.. Evaluation of surface treatments for adhesion of thermoplastic composites for automotive use, 16th European Conference on Composite Materials, ECCM 2014, 2014.
• Yu Sekiguchi, PASOMPHONE HEMTHAVY, Shigeki SAITO, KUNIO TAKAHASHI. Effect of elastic modulus on adhesion contact between an elastic body and a rigid body with surface roughness and a defect, EURADH 2012 9th European Adhesion Conference, Sept. 2012.  Official location  
• Y. Sekiguchi, P. Hemthavy, K. Takahashi. Manipulation by Adhesion Force between Elastic body and Rigid Object, The 5th AOTULE International Postgraduate Students Conference on Engineering, Proceedings of the 5th AOTULE International Postgraduate Student Conference on Engineering, pp. 151-153, Nov. 2010.  Official location  

Domestic Conference (Not reviewed / Unknown)

• Yu Sekiguchi. Reliability evaluation of adhesively bonded joints and application to structural parts, 第73回高分子学会年次大会, Polymer Preprints, Japan, 公益社団法人 高分子学会, Vol. 73, No. 1, 1J20ILY, June 2024.
• Yu Sekiguchi, Chiaki Sato. アクリル系構造用接着剤の疲労き裂進展におけるき裂進展速度とサイクル数の関係, 一般社団法人 日本機械学会 M&M2022 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 22-49, OS1405, Sept. 2022.
• Yu Sekiguchi, chiaki sato. Experimental investigation of flexural rigidity evaluation of adhesively bonded plate using a rheometer, 日本接着学会第６０回年次大会, 日本接着学会第６０回年次大会 講演要旨集, pp. 33-34, June 2022.
• Yu Sekiguchi, Chiaki Sato. アクリル系構造用接着剤の疲労き裂進展, 第70回高分子討論会, 高分子学会予稿集, 公益社団法人 高分子学会, Vol. 70, No. 2, 1Q04, Sept. 2021.  Official location  
• Yu Sekiguchi, Chiaki Sato. 構造用アクリル系接着剤のDCB試験における表面凹凸の影響, 日本接着学会第59回年次大会, 日本接着学会第59回年次大会 講演要旨集, 一般社団法人 日本接着学会, pp. 123-124, June 2021.
• Shin Horiuchi, Yu Sekiguchi, Yoshiteru Ishibashi, Masahiro Okamura, Ippei Kuroda, Akito Wakamatsu, Shota Tezuka, Kenji Tamaki, Mitsuhiro Iwamoto, Hideyuki Tamaki, Shintaro Watanabe, Ryo Otagaki, Toru Furusawa, Ryosuke Chikazawa, Ryohei Ihara. A research on failure prediction method for structural adhesives with CAE (Second Report), 2019 JSAE Annual Congress (Autumn), 自動車技術会2019年度秋季大会学術講演会講演予稿集, Society of Automotive Engineers of Japan, 184, Oct. 2019.
• Yu Sekiguchi, Chiaki Sato. Experimental study of the effect of the adhesive layer thickness of acrylic structural adhesive on the energy release rate, 日本機械学会 材料力学部門 若手シンポジウム2019, 日本機械学会材料力学部門M&M若手シンポジウム２０１９講演論文集, 一般社団法人 日本機械学会 材料力学部門, Aug. 2019.  Official location  
• Yu Sekiguchi, Chiaki Sato. Effect of elasto-plastic deformation of the adhesive layer in the DCB tests, 日本接着学会第57回年次大会, 日本接着学会第57回年次大会講演要旨集, 一般社団法人 日本接着学会, 103-104, June 2019.
• Shin Horiuchi, Yu Sekiguchi, Yoshiteru Ishibashi, Masahiro Okamura, Ippei Kuroda, Akito Wakamatsu, Shota Tezuka, Kenji Tamaki, Mitsuhiro Iwamoto, Hideyuki Tamaki, Shintaro Watanabe, Ryo Otagaki, Toru Furusawa, Ryosuke Chikazawa, Ryohei Ihara. A research on failure prediction method for structural adhesives with CAE (First Report), 2019 JSAE Annual Congress (Spring), 自動車技術会2019年度春季大会学術講演会講演予稿集, Society of Automotive Engineers of Japan, 325, May 2019.
• Syunsuke Watanabe, Shohei Moriya, Yu Sekiguchi, AKITOSHI OKINO, Chiaki Sato. Effect of atmospheric low temperature plasma treatment on fracture strength of adhesively bonded joints of fiber reinforced polypropylene, 一般社団法人 日本機械学会 M&M2018 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2018 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 18-53, pp. OS02 67-69, Dec. 2018.
• Asuka Hayashi, Yu Sekiguchi, Chiaki Sato. Influence of temperature on mode I fracture energy of second generation acrylic adhesive, 日本接着学会第56回年次大会, 日本接着学会第56回年次大会 講演要旨集, 一般社団法人 日本接着学会, P03A, June 2018.
• Yu Sekiguchi, Chiaki Sato. Analytical study on the strain rate of DCB tests using Winkler foundation model, 日本接着学会第56回年次大会, 日本接着学会第56回年次大会 講演要旨集, 一般社団法人 日本接着学会, pp. 59-60, June 2018.
• Asuka Hayashi, Yuki Yamagata, Lu Xi, Yu Sekiguchi, Chiaki Sato. 動的DCB試験における破壊じん性の測定, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 17-5, pp. 268-270, Oct. 2017.
• Katsuo Komatsu, Yu Sekiguchi, Nao Terasaki, Yuuki Fujio, Chiaki Sato. 応力発光塗料を用いた1/10車体モデルにおける応力分布の可視化, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 17-5, pp. 234-236, Oct. 2017.
• Norihide Abe, Yuki Yamagata, Yu Sekiguchi, Chiaki Sato. 複合負荷下における接着剤の材料構成式の検討, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2017 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 17-5, pp. 247-249, Oct. 2017.
• Yu Sekiguchi, Chiaki Sato. 難接着材料への表面改質の処理量による化学的変化と接着強度に関する研究, 第66回高分子討論会, 高分子学会予稿集, 公益社団法人 高分子学会, Vol. 66, No. 2, 1S05, Sept. 2017.  Official location  
• Yu Sekiguchi, Chiaki Sato. Effect of peeling speed on the adhesion force of gecko inspired anisotropic adhesive deveces, 日本接着学会第55回年次大会, 日本接着学会第55回年次大会 講演要旨集, P02A, June 2017.
• Shota Kawasaki, Yu Sekiguchi, Gosuke Nakajima, Kosuke Haraga, Chiaki Sato. Evaluation of stress distribution of mixed adhesive joint using digital image correlation method, 日本接着学会第55回年次大会, 日本接着学会第55回年次大会 講演要旨集, C-11, June 2017.
• Hideyuki Iwata, Yu Sekiguchi, Chiaki Sato. 微小構造凝着デバイスの断面形状が凝着異方性に及ぼす影響, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 16-3, pp. 697-698, Oct. 2016.
• Yuki Kuranaga, Yu Sekiguchi, Chiaki Sato. 表面処理を施した繊維強化熱可塑性樹脂の接着接合部における限界エネルギー解放率, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 16-3, pp. 722-723, Oct. 2016.
• Yuki Yamagata, Yu Sekiguchi, Chiaki Sato. 衝撃負荷下における構造用接着剤のモードＩ破壊じん性の評価, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2016 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, No. 16-3, pp. 707-709, Oct. 2016.
• kazumasa shimamoto, Yu Sekiguchi, chiaki sato. The critical energy release rates of welded joints between glass fiber reinforced polyamide 6 and metals, 第５３回日本接着学会年次大会, 日本接着学会 第５３回年次大会 講演要旨集, 一般社団法人日本接着学会, pp. 99-100, June 2015.
• Yu Sekiguchi, chiaki sato. Manipulation utilizing detachment mechanism of Gecko adhesion, 第53回日本接着学会年次大会, 日本接着学会 第53回年次大会 講演要旨集, 一般社団法人日本接着学会, pp. 59-60, June 2015.
• Sho Murakami, Yu Sekiguchi, Chiaki Sato. Influence of configuration on strength of T adhesive joints for glass fiber reinforced plastics, 一般社団法人 日本機械学会 M&M2014 材料力学カンファレンス, 一般社団法人 日本機械学会 M&M2014 材料力学カンファレンス 講演論文集, 一般社団法人 日本機械学会 材料力学部門, OS1744, July 2014.
• Yasuhiko Nara, Yu Sekiguchi, PASOMPHONE HEMTHAVY, KUNIO TAKAHASHI, Shigeki SAITO. 大変形を考慮した弾性梁と剛体間の凝着, ２０１４年度精密工学会春季大会, ２０１４年度精密工学会春季大会講演論文集, 精密工学会, No. J13, pp. 735-736, Mar. 2014.
• Takehiko YAZAKI, Yu SEKIGUCHI, Pasomphone HEMTHAVY, Kunio TAKAHASHI. Effect of Shape and Distribution of Material Properties of Beam on Adhesion with Rigid Body Surface, 19th Symposium on "Microjoining and Assembly Technology in Electronics", 19th Symposium on "Microjoining and Assembly Technology in Electronics", Mate2013, pp. 297-300, Jan. 2013.
• Y. Sekiguchi, P. Hemthavy, Shigeki Saito, Kunio Takahashi. Peeling of Adhered Elastic Tape, The 4th Multidisciplinary International Student Workshop (MISW2012), Proceedings of the 4th Multidisciplinary International Student Workshop, Graduate School of Engineering, Tokyo Institute of Technology, p. 89, Aug. 2012.
• Yu Sekiguchi, PASOMPHONE HEMTHAVY, Shigeki SAITO, KUNIO TAKAHASHI. Theoretical analysis of peeling force on adhesion of thin film, 接着学会年次大会, 接着学会第50回年次大会講演要旨集, The Adhesion Society of Japan, Vol. 50, pp. 73-74, June 2012.  Official location  
• Yu Sekiguchi, PASOMPHONE HEMTHAVY, Shigeki SAITO, KUNIO TAKAHASHI. Effect of Defects on the Surface of a Rigid Body in Adhesion Contact with a Semi-infinite Elastic Body, 17th Symposium on "Microjoining and Assembly Technology in Electronics", 17th Symposium on "Microjoining and Assembly Technology in Electronics", Microjoining Commission (JWS), Vol. 17, pp. 323-326, Feb. 2011.  Official location  
• Y. Sekiguchi, P. Hemthavy, K. Takahashi. Manipulation by Adhesion Force between Elastic Beam and Rigid Object, Proceedings of 2nd Multidisciplinary International Student Workshop in Tokyo Tech 2010, p. 37, Aug. 2010.  Official location  
• Miaomiao WANG, Yu SEKIGUCHI, Kunio TAKAHASHI, Shigeki SAITO, Pasomphone HEMTHAVY. Experiment of A Prototype of Quick Grip-release Mechanism Using Multi-beam Structure, 16th Symposium on "Microjoining and Assembly Technology in Electronics" (mate 2010), Proceedings of the 16th Symposium on Microjoining and Assembly Technology in Electronics (mate2010), Japan Welding Society, Vol. 16, pp. 435-438, Feb. 2010.  Official location  
• Miaomiao WANG, Yu SEKIGUCHI, Kunio TAKAHASHI, Pasomphone HEMTHAVY. Design of quick grip-release mechanism using multi-beam structure, national meeting of J.W.S., Preprints of the national meeting of J.W.S., Japan Welding Society, Vol. 85, pp. 184-185, Sept. 2009.  Official location  

Other Publication

• Yu Sekiguchi. Decrease in adhesive strength from a long-term point of view due to the viscoelastic behavior of polymers, Journal of The Adhesion Society of Japan, Vol. 59, No. 12, pp. 420-429, Dec. 2023.
• Yu Sekiguchi. 接着接合を知る ～信頼性の高い接着接合部の設計のために～, 強化プラスチックス, 一般社団法人強化プラスチック協会, Vol. 68, No. 9, pp. 336-341, Sept. 2022.  Official location  
• Yu Sekiguchi. 繊維強化ポリプロピレンと高張力鋼の異種材料溶着接合における高強度接合手法の検討, 溶接技術, 産報出版株式会社, Vol. 67, No. 10, pp. 96-97, Oct. 2019.  Official location  

Patent

• CHIAKI SATO, Goh Matsuo, Yu Sekiguchi. 界面破壊率測定装置、及び界面破壊率測定方法. Patent. Published. 国立大学法人東京工業大学, 国立研究開発法人 物質・材料研究機構. 2023/07/27. PCT/JP2023/027482. 2024/02/01. WO 2024/024870. 2024.
• CHIAKI SATO, Yu Sekiguchi. せん断強度測定装置、及びせん断強度測定システム. Patent. Registered. 国立大学法人東京工業大学, 国立研究開発法人 物質・材料研究機構. 2020/12/22. 特願2020-211990. 2022/07/04. 特開2022-98555. 特許第7527552号. 2024/07/26 2024.

Degree

• 固体間凝着力制御による把持と脱離,  Thesis,  Doctor (Engineering),  Tokyo Institute of Technology,  2013/03/26,   

[ Save as BibTeX ]    [ Paper, Presentations, Books, Others, Degrees: Save as CSV ]    [ Patents: Save as CSV ]