岸本喜久雄研究業績一覧 | T2R2 東京科学大学リサーチリポジトリ

ヘルプ

岸本喜久雄研究業績一覧 (485件)

論文

Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Evaluation of Interfacial Strength by Multi-stages Peel Test, Key Engineering Materials, pp. 483-488, 2004.
Akira Shinozaki, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Effect of initial stress on the propagation behavior of SH-waves in multilayered piezoelectric composite structures, International Journal of Engineering Science, No. 112, pp. 368-375, 2004.
Zhenghua Qian, Feng Jin, Zikun Wang, Kikuo Kishimoto. Dispersion relations for SH-wave propagation in periodic piezoelectric composite layered structures, International Journal of Engineering Science, No. 42, pp. 673-689, 2004.
Akira Shinozaki, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Effects of Meso-scale Structure and Interactions on Macro-scale Mechanical Properties in Polymeric Materials, Key Engineering Materials, pp. 747-752, 2004.
Husaini, Kikuo Kishimoto, Mitsuo Notomi. Finite Element Analysis of Rubber Particles Size Distribution on Fracture Toughness of Rubber-modified Polymer, Key Engineering Materials, pp. 711-716, 2004.
I. Jeon, Y.B. Park, H. Inoue, K. Kishimoto. Thermo-mechanical stress in Passivated Al-0.5%Cu thin films, Key Engineering Materials, pp. 507-512, 2004.
Masayuki Arai, Yoshifumi Okajima, Kikuo Kishimoto. Coating Interface Fracture Toughness Evaluation by A Combination of Edge Compression and Slinging Load, Key Engineering Materials, pp. 435-440, 2004.
F. Jin, K. Kishimoto, H. Qing, H. Inoue, T. Tateno. Influence of Imperfect Interface on the Propagation of Love Waves in Piezoelectric Layered Structures, Key Engineering Materials, pp. 251-256, 2004.
Rubani Firly, Kazuaki Inaba, Farid Triawan, Kikuo Kishimoto, Hiroaki Nakamoto. Numerical study of impact phenomena due to cavitation bubble collapse on metals and polymers, European Journal of Mechanics, B/Fluids, Vol. 101, Sept. 2023.
Rubani Firly, Kazuaki Inaba, Farid Triawan, Kikuo Kishimoto, Keisuke Hayabusa, Hiroaki Nakamoto.. Numerical prediction of cavitation damage based on shock-induced single bubble collapse near solid surfaces, European Journal of Mechanics - B/Fluids, Volume 98, Page 143-160, Dec. 2022. 公式リンク
Asep Bayu Dani Nandiyanto, Farid Triawan, Rubani Firly, Kikuo Kishimoto. Crystallite Size on Micromechanical Characteristics of WO3 Microparticles, Journal of Engineering Research, Vol. 9, No. 3A, pp. 268-277, Sept. 2021.
Kosuke Takahashi, Futoshi Yanai, Kazuaki Inaba, Kikuo Kishimoto, Yuichi Kozone, Toshio Sugizaki. Sticking Effect of a Tackifier on the Fibrillation of Acrylic Pressure-Sensitive Adhesives, Langmuir, American Chemical Society, Vol. 37, No. 39, pp. 11457-11464, Sept. 2021. 公式リンク
Kosuke Takahashi, Ryuto Oda, Kazuaki Inaba, Kikuo Kishimoto. Scaling effect on the detachment of pressure-sensitive adhesives through fibrillation characterized by a probe-tack test, SOFT MATTER, Vol. 60, pp. 6493-6500, June 2020.
Farid Triawan, Rihito Nakagawa, Kazuaki Inaba, Bentang Arief Budiman, KIKUO KISHIMOTO. Experimental investigation of shear stress effect on the flexural behavior of aluminum foam beam, Journal of Mechanical Science and Technology, KSME, Vol. 34, No. 5, pp. 1831-1836, Apr. 2020.
Kosuke Takahashi, Takahiro Matsuo, Kazuaki Inaba, KIKUO KISHIMOTO. Bending Deformation of Multiple Aligned Plates Toward Coalescence Induced by Capillarity, Journal of Microelectromechanical Systems, IEEE, 28, 4, 685 - 694, Aug. 2019.
Kenji INOUE, Farid Triawan, Kazuaki Inaba, KIKUO KISHIMOTO, Masashi NISHI, Michiyo SEKIYA, Kunihiko SEKIDO, Akihito SAITOH. Evaluation of interfacial strength of multilayer thin films polymer by nanoindentation technique, Bulletin of the JSME, Mechanical Engineering Journal, The Japan Society of Mechanical Engineers, Vol. 6, No. 1, pp. 18-00326, Feb. 2019.
Nandiyanto, A. B. D., Triawan, F., Firly, R., Abdullah, A. G., Aono, Y., Inaba, K., Kishimoto, K.. Identification of micro-mechanical characteristics of monoclinic tungsten trioxide microparticles by nanoindentation technique., Materials Physics and Mechanics, Vol. 42, No. 3, pp. 323-329, Dec. 2018.
高橋航圭, 深澤大志, 和久井航太, トリアワンファリド, 因幡和晃, 岸本喜久雄, 橋村徹. 継手部加工によるFe-Alレーザー溶接継手の疲労強度決定因子の検討, 日本機械学会論文集, 84, 865, Aug. 2018.
Masaharu HIBI, Farid TRIAWAN, Kazuaki INABA, Kosuke TAKAHASHI, Kikuo KISHIMOTO, Keisuke HAYABUSA, Hiroaki NAKAMOTO. Cavitation damage of epoxy resin subjected to uniaxial tensile loading, Mechanical Engineering Journal, The Japan Society of Mechanical Engineers, Vol. 5, No. 1, p. 17-00151, Jan. 2018. 公式リンク
森重直樹, TRIAWAN Farid, 因幡和晃, 岸本喜久雄. ペレットを内装したジルコニウム合金製円筒の軸衝撃荷重下での変形破壊挙動, 日本機械学会論文集, Nov. 2017. 公式リンク
Tomohisa Kojima, Kazuaki Inaba, Kosuke Takahashi, Farid Triawan, KIKUO KISHIMOTO. Dynamics of Wave Propagation Across Solid–Fluid Movable Interface in Fluid–Structure Interaction, Journal of Pressure Vessel Technology, Vol. 139, 3, 031308 (9 pages), Jan. 2017. 公式リンク
K. Hayabusa, K. Inaba, H. Ikeda, K. Kishimoto. Estimation of Fatigue Limits from Temperature Data Measured by IR Thermography, Experimental Mechanics, Vol. 57, pp. 185-194, Oct. 2016.
Bentang Arief Budiman, Kosuke Takahashi, Kazuaki Inaba, KIKUO KISHIMOTO. Evaluation of interfacial strength between fiber and matrix based on cohesive zone modeling, Composites Part A: Applied Science and Manufacturing, Vol. 90, Page 211-217, July 2016. 公式リンク
Kousuke TAKAHASHI, Takahiro MATSUO, Masakazu FURUTA, Shuzo OSHIMA, Kazuaki INABA, Kikuo KISHIMOTO. Mechanical Engineering LettersWetting-induced attraction of thin plates due to capillary flow, Bulletin of the JSME Vol.2, 2016, The Japan Society of Mechanical Engineers, Vol. 2, p. 16-00227, Apr. 2016.
Kosuke Takahashi, yuichiro yamagata, Kazuaki Inaba, KIKUO KISHIMOTO, Shiori Tomioka, Toshio Sugizaki. Characterization of Tack Strength Based on Cavity-Growth Criterion, Langmuir, American Chemical Society, Vol. 32, No. 14, pp. 3525-3531, Mar. 2016. 公式リンク
森重直樹, 高橋航圭, 因幡和晃, 岸本喜久雄. ペレットを有する円筒容器の衝撃挙動に関する研究, 日本機械学会論文集, Vol. 82, No. 841, 2016.
高橋航圭, 熊谷理, 勝山優一朗, 因幡和晃, 岸本喜久雄, 山田幹典, 谷中雅顕. 粘着剤の非線形粘弾性を考慮したはく離強度評価, 日本機械学会論文集, Vol. 82, No. 833, Dec. 2015.
高橋航圭, 新井大輔, 因幡和晃, 岸本喜久雄, 中本浩章, 早房敬祐. 機械・構造物補修用コーティング材料の耐キャビテーション評価, ターボ機械, Vol. 42, No. 12, pp. 767-776, Dec. 2014.
Hiroyuki Ushifusa, Kazuaki Inaba, Kosuke Takahashi, Kikuo Kishimoto. Supercritical CO2 generator using bubble collapse by water hammer, The Journal of Supercritical Fluids, Elsevier, Volume 94, Page 174-181, July 2014. 公式リンク
Bentang Arief Budiman, Kosuke Takahashi, Kazuaki Inaba, KIKUO KISHIMOTO. A New Method of Evaluating Interfacial Properties of a fiber/matrix composite, Journal of Composite Materials, SAGE Publisher, Jan. 2014. 公式リンク
Kosuke Takahashi, Seiji Sugita, Shuzo Oshima, Kazuaki Inaba, Kikuo Kishimoto. Evaluation of capillary-induced deformation of thin plates due to liquid column formation, Applied Physics Letters, AIP Publishing LLC, Volume 103, No. 043113, July 2013. 公式リンク
Kosuke Takahashi, Masashi Shimizu, Kazuaki Inaba, Kikuo Kishimoto, Yoichi Inao, Toshio Sugizaki. Tack performance of pressure-sensitive adhesive tapes under tensile loading, International Journal of Adhesion and Adhesives, Volume 45, Page 90-97, May 2013. 公式リンク
Kollika Nguon, Kazuaki Inaba, Tatsuro Hori, Kikuo Kishimoto. Effect of a Single Particle on Water-Tube Interaction Subjected to Axial Impact Loading, Theoretical and Applied Mechanics Japan, National Committee for IUTAM, Science Council of Japan, Vol. 61, pp. 151-160, Dec. 2012.
岸本喜久雄, 早房敬祐, 中本浩章, 因幡和晃. サーモグラフィによる回転曲げ疲労限度評価, 検査技術, 日本工業出版, pp. 35-38, June 2012.
Farid Triawan, Kikuo Kishimoto, Tadaharu Adachi, Kazuaki Inaba, Toshio Nakamura, Tohru Hashimura. The Elastic Behavior of Aluminum Alloy Foam under Uniaxial Loading and Bending Conditions, Acta Materialia, Vol. 60, pp. 3084-3093, Apr. 2012.
Nguon Kollika, Kazuaki Inaba, Hiroto Takahashi, Kikuo Kishimoto. Numerical Study on Wave Propagation in Coupled Pipe and Homogeneous Solid-Liquid Flow, Theoretical and Applied Mechanics Japan, National Committee for IUTAM, Science Council of Japan, Vol. 60, pp. 239-248, Feb. 2012.
KIKUO KISHIMOTO, Rehana Afrin, Masato Nakaji, Hiroshi Sekiguchi, David Lee, Atsushi Ikai. Forced Extension of Delipidated Red Blood Cell Cytoskeleton with Little indication of Spectrin Unfolding, Cytoskeleton, Wiley Periodicals Inc., No. 69, pp. 101-112, Feb. 2012.
Joris Prou, Kikuo Kishimoto, Kazuaki Inaba, Andrei Constantinescu. Inverse Analysis of Multiple Indentation Curves for Thin Film Young's Modulus Evaluation, Theoretical and Applied Mechanics Japan, National Committee for IUTAM, Vol. 60, pp. 249-261, Feb. 2012.
上月謙太郎, 因幡和晃, 岸本喜久雄. ナノインデンテーション試験による界面強度評価のための推定除荷曲線法, 日本機械学会論文集Ａ編, Vol. 77, pp. 629-637, Apr. 2011.
Naoya Saiki, Kazuaki Inaba, Kikuo Kishimoto, Hideo Seno, Kazuhiro Takahashi. Investigation of the Correlation between IC Chip Pick-Up Performance and Peeling Behavior of Adhesive Tapes, Key Engineering Materials, Vol. 462-463, pp. 807-811, Jan. 2011.
早房敬祐, 中本浩章, 因幡和晃, 岸本喜久雄. サーモグラフイによる回転曲げ疲労限度の評価, エバラ時報, Vol. 230, pp. 3-6, Jan. 2011.
Kayestha, P, Wijeyewickrema, A. C., Kishimoto, Kikuo. Wave propagation along a non-principal direction in a compressible pre-stressed elastic layer, International Journal of Solids and Structures, Vol. 48, No. 14-15, pp. 2141-2153, 2011.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Scale effects on thermal buckling properties of carbon nanotube., Physics Letters, ELSEVIER, A 374, 4890–4893, Oct. 2010.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Flexural wave propagation in double-layered nanoplates with small scale effects., Journal of Applied Physics, American Institute of Physics, 108, Sept. 2010.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Effects of the initial stress on the propagation and localization properties of Rayleigh waves in randomly disordered layered piezoelectric phononic crystals., Acta Mechanica, Springer-Verlag, 216, 291–300, Aug. 2010.
Naoya SAIKI, Kazuaki INABA, Kikuo KISHIMOTO, Hideo SENO, Kazuyoshi EBE. Study on Peeling Behavior in Pick-up Process of IC Chip with Adhesive Tapes, Journal of Solid Mechanics and Materials Engineering, 日本機械学会, Vol. 4, No. 7, pp. 1051-1060, July 2010.
佐伯尚哉, 市川功, 因幡和晃, 岸本喜久雄. 粘接着テープを用いた半導体製造工程におけるピックアップ性能評価, 日本機械学会論文集（A編）, 日本機械学会, 76, 766, 730-736, June 2010.
Joris Prou, Kikuo Kishimoto, Andrei Constantinescu. Identification of Young’s Modulus from Indentation Testing and Inverse Analysis, Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 6, pp. 781-795, June 2010.
Kayestha, P., Wijeyewickrema, A. C., Kishimoto, Kikuo. Time-harmonic wave propagation in a pre-stressed compressible elastic bi-material laminate, European Journal of Mechanics A/Solids, Vol. 29, pp. 143-151, Apr. 2010.
増田良太, 井上裕嗣, 岸本喜久雄, 早川基行, 稲男洋一. 多軸駆動形はく離試験によるラミネート工程のはく離挙動予測, 日本機械学会論文集(A編), 日本機械学会, Vol. 76, No. 763, pp. 325-331, Mar. 2010.
FARID TRIAWAN, TADAHARU ADACHI, KIKUO KISHIMOTO, Tohru Hashimura. Study on Elastic Moduli of Aluminum Alloy Foam under Uniaxial Loading and Flexural Vibration, Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 8, pp. 1369-1380, 2010.
増田良太, 井上裕嗣, 岸本喜久雄, 早川基行, 稲男洋一. 多軸駆動型はく離試験法による粘着シートの界面強度評価とY字型はく離過程の検討, 日本機械学会論文集(A編), 日本機械学会, Vol. 75, No. 752, pp. 507-515, Apr. 2009.
KIKUO KISHIMOTO, Kentaro Kozuki, TADAHARU ADACHI. Measurement of Interfacial Strength of Thin Polymer Coating by Nano-Indentation Method, Micromaterials and NanoMaterials, Micromaterials and NanoMaterials, 9, 26-29, Apr. 2009.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Tuning of band gaps for a two-dimensional piezoelectric phononic crystal with a rectangular lattice, Acta Mechanicca Sinica, Acta Mechanicca Sinica, Vol. 25, 65-71, Feb. 2009.
Wang Yize, Li Fengming, KIKUO KISHIMOTO, Yue-Sheng Wnag, Huang Wen-Hu. Elastic wave band gaps in magnetoelectroelastic phononic crystals, Wave Motion, Wave Motion, 46, 47-56, Jan. 2009.
増田良太, 井上裕嗣, 岸本喜久雄. 異方性を考慮した界面結合力モデルによる粘着テープのはく離進展解析, 計算数理工学論文集, Vol. 8, pp. 25-30, Nov. 2008.
Li Fengming, KIKUO KISHIMOTO, Yue-Sheng Wnag, Chen Zhao-Bu, Huang Wen-Hu. Vibration control of beams with active constrained layer damping, Smart Materials and Structures, Smart Materials and Structures, Vol. 17, 065036, pp. 9, Nov. 2008.
岸本喜久雄. 異方性を考慮した界面結合モデルによる粘着テープのはく離進展解析, 計算数理工学論文集, 日本計算数理工学会, Vol. 8, No. 5, 25-30, Nov. 2008.
Masaki Omiya, Miyazaki Takeshi, KIKUO KISHIMOTO, Masazumi Amagi. Effect of Nickel Pad Metallization Thickness on Fatigue Failure of BGA Lead-Free Solder Joint, IEEE Tranzaction on Components and Packaging Technologies, Institute of Electrical and Electronics Engineers, Vol. 31, No. 3, 734-740, Sept. 2008.
Wang Yize, Li Fengming, Huang Wen-Hu, Xiaoai Jiang, Yue-Sheng Wnag, KIKUO KISHIMOTO. Wave band gaps in two-dimensional piezoelectric/piezomagnetic phononic crystals, International Journal of Solids and Structures, International Journal of Solids and Structures, Vol. 45, 4203-4210, Mar. 2008.
M. Nizar MACHMUD, Masaki OMIYA, Hirotsugu INOUE, Kikuo KISHIMOTO. Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact, Advanced Materials Research, Trans Tech Publications, Vol. 33-37, pp. 381-386, Mar. 2008.
Ryota MASUDA, Hirotsugu INOUE, Kikuo KISHIMOTO. Peeling Rate Dependency of Delamination Behavior of Adhesives, Advanced Materials Research, Trans Tech Publications, Vol. 33-37, pp. 339-334, Mar. 2008.
M. Arai, Y. Okajima, Kikuo Kishimoto. Mixed-mode interfacial fracture toughness for thermal barrier coating, Engineering Fracture Mechanics, Elsevier, Vol. 74, pp. 2055-2069, Sept. 2007.
Zhenghua Qian, Feng Jin, Zikun Wang, Kikuo Kishimoto. Transverse surface waves on a piezoelectric material carrying a functionally graded layer of finite thickness, International Journal of Engineering Science, ELsevier, May 2007.
Ryota MASUDA, Masaki OMIYA, Hirotsugu INOUE, Kikuo KISHIMOTO. Effect of Peel Rate on Interfacial Strength, Key Engineering Materials, Vol. 345-346, pp. 185-188, May 2007.
橋村徹, M. Fauzan ADZIMAN, 岸本喜久雄. 発泡アルミニウムを用いた衝突エネルギー吸収体の圧縮特性, 日本機械学会論文集, 日本機械学会, Vol. 73, No. 727-A, pp. 315-322, Mar. 2007.
Hiroyuki Mae, Kikuo Kishimoto. Modeling and Simulation of Impact Failure Characteristic of Polypropylene by Elastoviscoplastic Constitutive Law, Journal of Solid Mechanics and Materials Engineering, The Japan Society of Mechanical Engineers, Vol. 1, No. 1, pp. 35-46, Jan. 2007.
篠崎明, 大宮正毅, 井上裕嗣, 岸本喜久雄. 分子鎖ネットワークモデルを用いた高分子材料の剥離と押し込み解析, 計算数理工学論文集, Vol. 6, No. 2, pp. 147-152, Dec. 2006.
納冨充雄, 長岡健吾, 岸本喜久雄, 王鉄軍. ゴム粒子分散スチレン系ポリマーブレンドおよびそのＰＣブレンドの機械的特性, 日本機械学会論文集(Ａ編）, Vol. 72, No. 724, pp. 213-219, Dec. 2006.
Akira Shinozaki, Hirotsugu Inoue, Kikuo Kishimoto. Analysis of Mechanical Behavior of Polymers Using Molecular Chain Network Model, JSME International Journal(Series A), Vol. 49, No. 4, pp. 503-512, Oct. 2006.
Amit Karmakar, Kikuo Kishimoto. Free Vibration Analysis of Delaminated Composite Pretwisted Rotating Shells - A Finite Element Approach, JSME International Journal(Series A), Vol. 49, No. 4, pp. 492-502, Oct. 2006.
荒井正行, 和田英志, 岸本喜久雄. 溶射プロセスに基づくセラミック溶射コーティングの残留応力解析, 日本機械学会論文集(Ａ編）, Vol. 72, No. 717, pp. 676-682, May 2006.
Akira Shinozaki, Kikuo Kishimoto, Hirotsugu Inoue. Simulation of Deformation Behavior of Polymeric Materials by Chain Network Model, Key Engineering Materials, Vol. 306-308, pp. 983-988, Mar. 2006.
Feng Jin, Kikuo Kishimoto, zhenghua Qian, Zikun Wang. Study on the Scattering of Elastic Waves for the Nondestructive Evaluation of Piezoelectric Composites, Key Engineering Materials, Vol. 306-308, pp. 1139-1144, Mar. 2006.
M. Nizar Machmud, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. A Phenomenological Constitutive Model Constructed for PC/ABS Blends, Key Engineering Materials, Vol. 306-308, pp. 989-994, Mar. 2006.
M. Nizar Machmud, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Impact Behavior Analysis of PC/ABS(50/50) Blends, Key Engineering Materials, Vol. 297-300, pp. 1297-1302, Nov. 2005.
Feng Jin, Kikuo Kishimoto, Hirotsugu Inoue, Takeshi Tateno. Experimental Investigation on the Interface Properties Evaluation in Piezoelectric Layered Structures by Love Waves Propagation, Key Engineering Materials, Vol. 297-300, pp. 807-812, Nov. 2005.
Akira Shinozaki, Kikuo Kishimoto, Hirotsugu Inoue. A Study of Deformation Behavior in Polymer, Key Engineering Materials, Vol. 297-300, pp. 2922-2928, Nov. 2005.
I, Jeon, M. Omiya, H. Inoue< K. Kishimoto, T.Asahina. A New Specimen for Measuring the Interfacial Toughness of Ai-0.5%Cu Thin Film on Si Substrate, Key Engineering Materials, Vol. 297-300, pp. 521-526, Nov. 2005.
Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto, Masaaki Yanaka, Noritaka Ihashi. UV-irradiation Effects on Interfacial Strength between Thin Ceramic Film and Polymer Substrate, Key Engineering Materials, Vol. 297-300, pp. 2284-2289, Nov. 2005.
Amit Karmakar, Kikuo Kishimoto. Transient Dynamic Response of Delaminated Composite Twisted Cylindrical Shells subjected to Low Velocity Impact, Key Engineering Materials, Vol. 297-300, pp. 1285-1290, Nov. 2005.
篠崎明, 井上裕嗣, 岸本喜久雄. 分子鎖ネットワークモデルによる高分子材料の機械的特性解析（分子量分布ならびに紫外線劣化の影響）, 日本機械学会論文集(Ａ編）, Vol. 71, No. 710, pp. 1333-1339, Oct. 2005.
Zhenghua Qian, Feng Jin, Zikun Wang, Kikuo Kishimoto. Investigation of scattering of elastic waves by cylinders in 1-3 piezocomposites, Ultrasonic, Vol. 43, pp. 822-831, May 2005.
Feng Jin, Zhenghua Qian, Zikun Wang, Kikuo Kishimoto. Propagation Behavior of Love waves in a piezoelectric layered structure with inhomogeneous initial stress, Smart Materials and Structures, Vol. 14, pp. 515-523, 2005.
F. Jin, Z. Wang, Kikuo Kishimoto. Basic properties of Rayleigh surface wave propagation along curved surfaces, International Journal of Engineering Science, Vol. 43, pp. 250-261, 2005.
Amit Karmakar, Haraprasad Roy, Kikuo Kishimoto. Free vibration analysis of delaminated composite pretwisted shells, Aircraft Engineering and Aerospace Technology, Vol. 77, No. 6, pp. 486-490, 2005.
大宮正毅, 井上裕嗣, 岸本喜久雄, 谷中雅顕, 伊橋紀孝. 高分子フィルム上に形成したぜい性薄膜の界面付着強度評価, 材料, Vol. 53, No. 8, pp. 856-861, Aug. 2004.
Hirotsugu INOUE, Yoshihiro HIROKAWA, Kikuo KISHIMOTO. Stress Separation in Thermoelastic Stress Analysis Using Nonlinearity of the Thermoelastic Effect, JSME International Journal, Series A, 日本機械学会, Vol. 47, No. 3, pp. 305-311, July 2004.
Kikuo Kishimoto, Hirotugu Inoue, Masaki Omiya. Interfacial Strength Evaluation by Finite Element Method with Cohesive Zone Model, Proceedings of WCCM VI in conjunction with APCOM'04,Beijing, China,Tsinghua University Press & Springer-Verlag, 2004.
大久保陽平, 大宮正毅, 井上裕嗣, 岸本喜久雄, 渡邉裕人. エッジ効果を低減させた側圧試験方法の提案, 信学技報, No. 4, pp. 17-22, 2004.
マハムドM.ニザル, 大宮正毅, 井上裕嗣, 岸本喜久雄. Falling Weight Impact Test for PC/ABS Blend, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 53-54, 2004.
望月大資, 大宮正毅, 井上裕嗣, 岸本喜久雄. 衝撃引張試験によるPC／ABS樹脂の機械的特性評価, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 55-56, 2004.
宮崎剛史, 大宮正毅, 井上裕嗣, 岸本喜久雄, 雨海正純. 経年変化を受けたはんだ接合部の疲労強度評価, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 253-254, 2004.
井上裕嗣, 伊藤大介, 岸本喜久雄. 熱弾性法による応力測定における熱伝導の影響, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 561-562, 2004.
篠崎明, 岸本喜久雄, 井上裕嗣. 分子鎖ネットワークモデルによる高分子材料の変形に関する研究, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 617-618, 2004.
井上裕嗣, 齋藤俊正, 岸本喜久雄. 接触型線集束超音波探触子のTOFD法への適用, 日本機械学会M&M2004材料力学カンファレンス講演論文集, No. 04-6, pp. 305-306, 2004.
宇佐美秀明, 納冨充雄, 岸本喜久雄, 王鉄軍. ポリマーアロイの疲労き裂進展挙動の検討, 日本機械学会第1７回計算力学講演会講演論文集, No. 04-40, pp. 125-126, 2004.
大宮正毅, 井上裕嗣, 岸本喜久雄, 谷中雅顕, 伊橋紀孝. 高分子フィルム上に形成したぜい性薄膜の界面付着強度評価, 材料, Vol. 52, No. 8, pp. 856-861, 2004.
Z. Qian, F. Jin, Z. Wang, Kikuo Kishimoto. Love waves propagation in a piezoelectric layered structure with initial stresses, Acta Mechanica, No. 171, pp. 41-57, 2004.
大宮正毅, 篠原良和, 井上裕嗣, 岸本喜久雄. 微小圧子押込法によるコーティング薄膜の界面強度評価, 日本材料学会第52期学術講演会講演論文集, pp. 326-327, 2003.
篠崎明, 井上裕嗣, 岸本喜久雄. ネットワークモデルによる高分子材料の力学解析, 日本機械学会第16回計算力学講演会講演論文集, pp. 395-396, 2003.
大宮正毅, 井上裕嗣, 岸本喜久雄. 界面結合力モデルを用いたマルチステージピール試験の有限要素解析, 日本機械学会第16回計算力学講演会講演論文集, pp. 781-782, 2003.
Youhei Ookubo, Hirotsugu Inoue, Masaki Omiya, Hirohito Watanabe, KIKUO KISHIMOTO. Edge Effects on Transmission Loss of Optical Fiber in Lateral-Pressure Test, Proceedings of the 52nd International Wire & Cable Symposium, pp. 396-399, 2003.
井上裕嗣, 浅岡卓郎, 岸本喜久雄. 接触型線集束探触子の超音波励起特性の評価, 日本機械学会材料力学部門講演会講演論文集, No. 03-11, pp. 1011-1012, 2003.
大宮正毅, 潘剛毅, 井上裕嗣, 谷中雅顕, 伊橋紀孝, 岸本喜久雄. 高分子基材上に形成した脆性薄膜の界面強度評価, 日本機械学会材料力学部門講演会講演論文集, No. 03-11, pp. 461-462, 2003.
大宮正毅, 井上裕嗣, 谷中雅顕, 伊橋紀孝, 岸本喜久雄. 高分子フィルム上に形成した脆性薄膜の界面付着強度評価, 第11回破壊力学シンポジウム講演論文集, pp. 144-149, 2003.
Kikuo Kishimoto, Masaki Omiya, Masazumi Amagai. Effect of Intermetallic Compound Layer Development on Mechanical Strength of Lead Free Solder Joints, TMS 2003 International Metals & Materials Exhibition, 132nd Annual Meeting & Exhibition, pp. 430, 2003.
長岡健吾, 納冨充雄, 王鉄軍, 岸本喜久雄. ABS系とPC/ABS系ポリマーアロイのモルフォロジが機械特性に及ぼす影響, 日本機械学会2003年度年次大会講演論文集, Vol. 1, No. 3, pp. 291-292, 2003.
中村佑樹, 井上裕嗣, 川村法靖, 川上崇, 岸本喜久雄. プラスチック筐体に内蔵されたプリント基板の落下衝突挙動, 日本機械学会材料力学部門講演会講演論文集, No. 03-11, pp. 631-632, 2003.
紅林弘太郎, 廣川幹浩, 井上裕嗣, 岸本喜久雄. 熱弾性効果の非線形性を利用した残留応力同定法の検討, 日本機械学会材料力学部門講演会講演論文集, No. 03-11, pp. 859-860, 2003.
篠崎明, 井上裕嗣, 岸本喜久雄. 高分子材料の破壊に対するメゾ領域からの考察, 第11回破壊力学シンポジウム講演論文集, pp. 109-114, 2003.
Chyanbin Hwu, Masaki Omiya, Kikuo Kishimoto. A Key Matrix N for the Stress Singularity of the Anisotropic Elastic Composite Wedges, JSME International Journal, Vol. 46, No. 1, pp. Series A 40-50, 2003.
荒井正行, 岩田宇一, 佐藤仁, 岸本喜久雄. 8wt.%Y2O3-ZrO2/CoNiCrAIY遮熱コーティングの界面酸化過程について, 日本機械学会論文集（A編）, Vol. 69, No. 678, pp. 21-26, 2003.
井上裕嗣, 早房敬祐, 廣川幹浩, 岸本喜久雄. 熱弾性効果の非線形性を利用した熱弾性応力測定のための主応力分離法, 非破壊検査, Vol. 52, No. 4, pp. 201-207, 2003.
大久保陽平, 岸本喜久雄, 井上裕嗣, 渡邊裕人. 光ファイバの側圧試験方法とその有限要素法解析, 電子情報通信学会技術研究報告, Vol. 102, No. 696, pp. 11-14, 2003.
廣川幹浩, 井上裕嗣, 岸本喜久雄. 熱弾性効果を利用した残留応力同定に関する逆問題解析, 計算数理工学論文集, Vol. 3, No. 3_062001, 2003.
大宮正毅, 岸本喜久雄. 界面結合力モデルを用いた界面破壊基準の検討, 材料, Vol. 51, No. 12, pp. 1367-1372, Dec. 2002.
渋谷寿一, 甲斐照高, 岸本喜久雄, 井上裕嗣, 高橋健太郎. 任意形状パンチによる半無限弾性体の弾性接触問題, 日本機械学会平成14年度材料力学部門講演会講演論文集, pp. 373-374, 2002.
納冨充雄, 岸本喜久雄. ポリマーアロイの強度に関する実験的アプローチ, 日本機械学会第15回計算力学講演会講演論文集, pp. 721-722, 2002.
井上裕嗣, 岸本喜久雄, 横山雄. ウェーブレット変換を用いた衝撃力の逆問題解析 , 日本機械学会第１５回計算力学講演会講演論文集, pp. 391-392, 2002.
岸本喜久雄. 破壊力学特集号の刊行にあたって（巻頭言）, 材料, Vol. 51, No. 8, pp. 849, 2002.
大宮正毅, 福永悦史, 井上裕嗣, 岸本喜久雄, 雨海正純 . マルチステージピール試験法による界面はく離強度評価 , 日本材料学会第51期学術講演会講演論文集, pp. 313-314, 2002.
納冨充雄, 岸本喜久雄. 破面観察によるPC/ABS, PC/AES, PC/ASA, PC/SX の疲労き裂進展の評価, 日本材料学会第51期学術講演会講演論文集, pp. 107-108, 2002.
井上裕嗣, 浅岡卓郎, 岸本喜久雄. 接触型線集束探触子による超音波探傷, 日本材料学会第51期学術講演会講演論文集, pp. 105-106, 2002.
大宮正毅, 井上裕嗣, 岸本喜久雄. 結合力モデルを用いた接合界面の混合モード破壊基準, 日本機械学会M&Mﾚｲｸｻｲﾄﾞｻﾏｰｼﾝﾎﾟｼﾞｳﾑ講演論文集, pp. 61-62, 2002.
岸本喜久雄, 井上裕嗣, 浅岡卓郎. 接触型線集束超音波探触子の開発と応用, 第46回日本学術会議材料研究連合講演会講演論文集, pp. 305-306, 2002.
井上裕嗣, 浅岡卓郎, 岸本喜久雄. 接触型線集束超音波探触子の指向性評価, 日本機械学会材料力学部門講演会講演論文集, pp. 509-510, 2002.
大宮正毅, 井上裕嗣, 岸本喜久雄, 雨海正純. マルチステージピール試験によるCu薄膜の界面はく離強度評価, 日本機械学会材料力学部門講演会講演論文集, pp. 245-246, 2002.
井上裕嗣, 加藤雄貴, 岸本喜久雄, 渋谷寿一. 熱弾性応力測定における熱伝導の影響に関する研究, 日本機械学会材料力学部門講演会講演論文集, pp. 209-210, 2002.
廣川幹浩, 井上裕嗣, 岸本喜久雄, 岸本喜久雄. 熱弾性応力測定における主応力分離の新手法（フィルタ処理による精度向上）, 日本機械学会材料力学部門講演会講演論文集, pp. 207-208, 2002.
長岡健吾, 納冨充雄, 岸本喜久雄. ABS系とPCポリマーアロイのモルフォロジ観察と疲労き裂進展速度に及ぼす影響, 日本機械学会平成14年度材料力学部門講演会講演論文集, pp. 115-116, 2002.
IGN Wiratmaja PUJA, Toshikazu SHIBUYA, Kikuo KISHIMOTO, Hirotsugu INOUE. On the Boundary Value Problems of Circular Loading for Transversely Isotropic Piezoelectric Half Space, JSME International Journal Series A, Vol. 44, No. 4, pp. 462-471, 2002.
Masazumi AMAGAI, Masako WATANABE, Masaki OMIYA, Kikuo KISHIMOTO, Toshikazu SHIBUYA. Mechanical Characterization of Sn-Ag-based Lead-free Solders, Microelectronics Reliability, Vol. 42, pp. 951-966, 2002.
M. Omiya, K. Kishimoto, Wei Yang. Interface Debonding Model and its Application to the Mixed Mode Interface Fracture Toughness, International Journal of Damage Mechanics, Vol. 11, pp. 263-286, 2002.
Kikuo KISHIMOTO, Masaki OMIYA, Wei YANG. Fracture Mechanics of Bonding Interface: A Cohesive Zone Model, Sensors and Actuators A, pp. 198-206, 2002.
清水真樹, 納冨充雄, 下田博一, 岸本喜久雄, 王鉄軍. PC/ABS及びPC系ポリマーアロイ樹脂の疲労き裂進展, 第45回日本学術会議材料研究連合講演会講演論文集, pp. 257-258, 2001.
大宮正毅, 岸本喜久雄. 界面破壊基準の結合力モデルによる検討, 第45回日本学術会議材料研究連合講演会講演論文集, pp. 231-232, 2001.
井上裕嗣, 横山雄, 岸本喜久雄. ウェーブレット変換を用いた衝撃力の逆問題解析, 日本機械学会2001年度年次大会講演論文集(I), pp. 11-12, 2001.
佐藤仁, 荒井正行, 岩田宇一, 佐久間俊雄, 岸本喜久雄. 遮熱コーティング層の発熱時損傷に及ぼす温度・時間の影響, 日本機械学会2001年度年次大会講演論文集(I), pp. 267-268, 2001.
鹿島寛士, 荒井正行, 岩田宇一, 佐久間俊雄, 井上裕嗣, 岸本喜久雄. 自由曲げ振動によるコーティング層のヤング率推定に関する研究, 日本機械学会2001年度年次大会講演論文集(I), pp. 279--280, 2001.
大宮正毅, 原田孝雄, 岸本喜久雄, 井上裕嗣, 渋谷寿一, 雨海正純. 鉛フリーはんだ接合部の界面強度に及ぼす熱時効の影響, 日本機械学会2001年度年次大会講演論文集(I), pp. 281-282, 2001.
井上裕嗣, 草開英司, 岸本喜久雄, 渋谷寿一. 接触型線集束超音波探触子の開発, 日本機械学会材料力学部門講演会講演論文集，(01-16), pp. 325-326, 2001.
井上裕嗣, 浅岡卓郎, 岸本喜久雄, 渋谷寿一. 接触型線集束超音波探触子による表面き裂の非破壊評価, 日本機械学会材料力学部門講演会講演論文集，(01-16), pp. 327-328, 2001.
岸田博行, 納冨充雄, 岸本喜久雄, 下田博一 . ABS, AES, ASA, SX樹脂の疲労き裂進展特性 , 日本機械学会材料力学部門講演会講演論文集，(01-16) , pp. 415-416, 2001.
篠原良和, 大宮正毅, 井上裕嗣, 岸本喜久雄, 渋谷壽一, 楊衛. マルチステージピール試験によるコーティング薄膜のはく離強度評価, 日本機械学会材料力学部門講演会講演論文集，(01-16), pp. 417-418, 2001.
納冨充雄, 岸本喜久雄, 王鉄軍, 渋谷壽一 . ABS樹脂とPCの破壊に及ぼす応力3軸度の影響 , 日本材料学会第50期学術講演会講演論文集 , pp. 115-116, 2001.
井上裕嗣, 浅岡卓郎, 岸本喜久雄, 渋谷寿一. 線集束型探触子による表面き裂探傷における超音波の可視化, 日本材料学会第50期学術講演会講演論文集, pp. 125-126, 2001.
岸本喜久雄. 技術士法の改正とそれに関る日本機械学会の取組み , 日本機械学会材料力学部門2001年春のシンポジウム講演論文集，(01-28) , pp. 35-38, 2001.
M. Notomi, K. Kishimoto, T. Shibuya, H. Inaba, A. Morita . Discontinuous Crack Growth of Polyimide Resin, Affected by Molecular Weight , 10th International Conference on Fracture, 2001.
Husaini, K. Kishimoto, M. Notomi, T. Shibuya. Fracture behaviour of PC/ABS resin under mixed-mode loading, Fatigue Fract Engng Mater Struct 24, pp. 895-903, 2001.
M. Omiya, K. Kishimoto, T. Shibuya. Finite Element Analysis on Fracture Behavior of the Interface Crack with Plastic Deformation, Materials Science Research International, Special Technical Publication-1, pp. 238-243, 2001.
M. Omiya, K. Kishimoto, T. Shibuya, M. Amagai. Effect of Intermetallic Compound Layer Development on Interfacial Strength of Solder Joints, Proceedings of IPACK'01, The Pscific Rim/ASME International Electronic Packaging Technical Conference and Exibition, July 8-13, 2001, Kauai, Hawaii, USA（IPACK2001-15556 in CD-ROM）, Vol. CR-ROM, 2001.
岸本喜久雄, 井上裕嗣, 早房敬祐, 渋谷寿一. 実験応力解析における逆問題解析, 日本応用数理学会2000年度年会講演予稿集, pp. 44-45, 2000.
河野賢哉, 三浦英生, 大宮正毅, 岸本喜久雄, 渋谷寿一. 微小圧子押込法による弾性定数測定に及ぼす押込み深さの影響, 日本機械学会材料力学部門講演会講演論文, Vol. 00, No. 19, pp. 187-188, 2000.
大宮正毅, 鈴木啓介, 井上裕嗣, 岸本喜久雄, 渋谷寿一. 界面き裂の塑性変形を伴う破壊挙動に関する有限要素解析, 日本機械学会2000年度年次大会講演論文集（I）, Vol. 00, No. 1, pp. 187-188, 2000.
宮田直敏, 納冨充雄, 岸本喜久雄, 渋谷寿一. ポリマーアロイの縦弾性係数に及ぼすモルフォロジの影響, 日本機械学会2000年度年次大会講演論文集（I）, Vol. 00, No. 1, pp. 159-160, 2000.
大宮正毅, 中子裕也, 岸本喜久雄, 渋谷寿一, 雨宮正純. はんだ接合材の界面強度に及ぼす金属間化合物の影響, 日本機械学会材料力学部門講演会講演論文集, Vol. 00, No. 19, pp. 231-232, 2000.
川村法靖, 川上崇, 岸本喜久雄, 納冨充雄, 渋谷壽一. シリカ粒子充てんエポキシ樹脂の破壊靱に及ぼす温度の影響, 日本機械学会論文集(A編), Vol. 65, No. 640, pp. 2491-2496, 2000.
荒井正行, 佐久間俊雄, 岩田宇一, 山田隆之, 中村一義, 岸本喜久雄. 圧縮応力下での皮膜材のはく離過程の観察とはく離評価, 日本機械学会論文集（A編）, Vol. 66, No. 641, pp. 144～150, 2000.
早房敬祐, 井上裕嗣, 田中秀一, 岸本喜久雄, 渋谷寿一. 光弾性応力測定における主応力分離のためのハイブリッド解析, 日本機械学会論文集（A編）, Vol. 66, No. 646, pp. 1075～1082, 2000.
大宮正毅, 岸本喜久雄, 渋谷寿一. 結合力モデルを用いた異材界面き裂の有限要素解析, 日本機械学会論文集（A編）, Vol. 66, No. 643, pp. 532～539, 2000.
納冨充雄, 岸本喜久雄, Tiejun WANG, 渋谷寿一. PC/ABSポリマーアロイのき裂進展特性に及ぼすモルフォロジの影響, 日本機械学会論文集（A編）, Vol. 66, No. 646, pp. 1151～1156, 2000.
岸本喜久雄. 界面破壊力学, 材料, Vol. 49, No. 2, pp. 238～244, 2000.
荒井正行, 岩田宇一, 長谷川賢二, 岸本喜久雄. 残留応力解析に基づくAl2O3/Cu 傾斜機能材料の創製, 材料, Vol. 49, No. 4, pp. 433～439, 2000.
大宮正毅, 増田健太郎, 岸本喜久雄, 渋谷寿一, 雨宮正純. はんだ接合部の機械的強度に及ぼす金属間化合物の影響, 日本材料学会第49期学術講演会講演論文集, pp. 431～432, 2000.
Kikuo Kishimoto. Fracture Behaviours of Advanced Polymer Composites under Mixed Mode Loading, Key Engineering Materials, No. 183-187, pp. 1053-1062, 2000.
Mitsuo Notomi, Kikuo Kishimoto, Tiejun Wang, Toshikazu Shibuya. Tensile and Fracture Behaviors of PC/ABS Polymer Alloy, Key Engineering Materials, No. 183-187, pp. 779-784, 2000.
M. Omiya, K. Kishimoto, T. Shibuya. The Influence of Plastic Deformation on Interface Fracture Behavior, Key Engineering Materials, No. 183-187, pp. 541-546, 2000.
T. Wang, K. Kishimoto, M. Notomi. A Micromechanics Criterion for the Ductile Fracture of a Polycarbonate, Key Engineering Materials, No. 183-187, pp. 121-126, 2000.
Keisuke HAYABUSA, Hirotsugu INOUE, Kikuo KISHIMOT, Toshikazu SHIBUYA. Improvement of Accuracy of Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis, JSME Internatinal Journal Series A, Vol. 43, No. 4, pp. 305-313, 2000.
Kikuo Kishimoto, Hirotsugu Inoue, Toshikazu Shibuya. Dynamic Force Calibration for Measuring Impact Fracture Toughness using the Charpy Testing Machine, ASTM STP, Vol. 1380, pp. 253-266, 2000.
向井稔, 高橋浩之, 川上崇, 高橋邦明, 岸本喜久雄. Sn63Pb37はんだのき裂進展評価に関する一考察, 日本機械学会第12回計算力学講演会講演論文集, Vol. 99, No. 5, pp. 655-656, 1999.
川上崇, 高橋浩之, 向井稔, 高橋邦明, 岸本喜久雄. はんだ接合部における進行性変形, 日本機械学会第12回計算力学講演会講演論文集, Vol. 99, No. 5, pp. 653-654, 1999.
井上裕嗣, 岸本喜久雄, 渋谷壽一. Lamb波の分散特性に基づく薄板の弾性特性逆解析, 日本機械学会第12回計算力学講演会講演論文集, Vol. 99, No. 5, pp. 457-458, 1999.
大宮正毅, 岸本喜久雄, 渋谷壽一. 界面破壊挙動におよぼす塑性変形の影響, 日本機械学会第12回計算力学講演会講演論文集, Vol. 99, No. 5, pp. 269-270, 1999.
井上裕嗣, 岸本喜久雄, 渋谷壽一. 接触型線集束超音波探触子による薄板の非破壊検査, 日本機械学会材料力学部門講演会講演論文集, 99-16 (1999), Vol. 99, No. 16, pp. 293-294, 1999.
川村法靖, 川上崇, 岸本喜久雄. 半導体封止樹脂の切欠き部強度評価に関する検討, 日本機械学会材料力学部門講演会講演論文集, Vol. 99, No. 16, pp. 89-90, 1999.
岸本喜久雄, 判治宗嗣, 大宮正毅, 渋谷壽一. アルミニウム合金A2024-T351の混合モードき裂進展挙動, 日本材料学会第10回破壊力学シンポジウム講演論文集, pp. 102-106, 1999.
早房敬祐, 井上裕嗣, 田中秀一, 岸本喜久雄, 渋谷壽一. 光弾性応力測定における主応力分布のための境界要素逆解析, 日本機械学会1999年度年次大会講演論文集(Ⅲ), Vol. 99, No. 1, pp. 173-174, 1999.
納冨充雄, 岸本喜久雄, 渋谷壽一, 稲葉尚士, 森田淳. ポリイミド樹脂の疲労き裂進展特性, 日本機械学会1999年度年次大会講演論文集(Ⅲ), Vol. 99, No. 1, pp. 103-104, 1999.
大宮正毅, 岸本喜久雄, 渋谷壽一. CTS試験片を用いた異種材界面き裂の破壊試験, 日本機械学会1999年度年次大会講演論文集(I), Vol. 99, No. 1, pp. 283-284, 1999.
向井稔, 高橋浩之, 川上崇, 高橋邦明, 岸本喜久雄. はんだバンプ接合部のき裂進展挙動評価, 日本機械学会1999年度年次大会講演論文集(I), Vol. 99, No. 1, pp. 5-6, 1999.
岸本喜久雄, 大宮正毅. 界面の破壊力学, 日本材料学会第48期学術講演会講演論文集, pp. 237-243, 1999.
向井稔, 高橋浩之, 川上崇, 高橋邦明, 岸本喜久雄. はんだバンプ接合部のき裂進展挙動評価, 日本機械学会論文集(A編), Vol. 65, No. 636, pp. 42-47, 1999.
Mitsuo Notomi, Kikuo Kishimoto, Toshikazu Shibuya, Takashi Koizumi. Effect of Moisture Absorption on Fracture Behaviors of Acrylonitrile-Butadiene-Styrene Resin, Journal of Applied Polymer Science, Vol. 72, pp. 435-442, 1999.
Kikuo Kishimoto, Mitsuo Notomi, Shun Kadota, Toshikazu Shibuya, Noriyasu Kawamura, Takashi Kawakami. Mixed-Mode Fracture Behavior of Silica Particulate Filled Epoxide Resin, ASTM STP, Vol. 1359, pp. 21-40, 1999.
Keisuke Hayabusa, Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya. Boundary Element Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis, JSME International Journal Series A, Vol. 42, No. 4, pp. 618-623, 1999.
T.J.Wang, K.Kishimoto. Higher Order Fields for Damaged Nonliner Antiplane Shear Notch, Crack and Inclusion Problems, Eur. J. Mech. A/Solids, Vol. 18, pp. 963-986, 1999.
早房敬祐, 井上裕嗣, 岸本喜久雄, 渋谷壽一. 光弾性応力測定における主応力分離のための境界要素逆解析, BTEC論文集, Vol. 9, pp. 37-42, 1999.
納冨充雄, 稲葉尚士, 岸本喜久雄, 渋谷壽一, 森田淳, 吉田育紀. ポリイミド樹脂の引張特性ならびに破壊靱性の分子量依存性, 日本機械学会論文集(A編), Vol. 65, No. 629, pp. 67-71, 1999.
植木健司, 渋谷壽一, 岸本喜久雄, 井上裕嗣. ３次元き裂の応力拡大係数の数値解析評価精度の向上について, 日本機械学会論文集(A編), Vol. 65, No. 629, pp. 72-79, 1999.
Fashang Ma, Kikuo Kishimoto. On Yielding and Deformation of Porous Plastic Materials, Mechanics of Materials, Vol. 30, pp. 55-68, 1998.
Toshikazu Shibuya, Kikuo Kishimoto, Hirotsugu Inoue, Takashi Okamura. Torsion of Compound Hollow Cylinder with an External Annular Crack, JSME International Journal Ser.A, Vol. 41, No. 4, pp. 510-516, 1998.
Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya, Kenjirou Harada. Regularization of Numerical Inversion of the Laplace Transform for the Inverse Analysis of Impact Force, JSME International Journal Ser.A, Vol. 41, No. 4, pp. 473-480, 1998.
Minoru Mukai, Takashi, Kawakami, Kuniaki Takahashi, Kikuo Kishimoto, Toshikazu Shibuya. Thermal Fatigue Life of Solder Bumps in BGA, JSME International Journal Ser.A, Vol. 41, No. 2, pp. 260-266, 1998.
岸本喜久雄, 井上裕嗣, 納冨充雄, 渋谷壽一. PC/ABS樹脂の衝撃破壊じん性評価, 材料, Vol. 47, No. 8, pp. 836-840, 1998.
早房敬祐, 岸本喜久雄, 井上裕嗣, 渋谷壽一. 熱弾性応力測定における主応力分離のための境界要素逆解析, 境界要素法論文集, Vol. 15, pp. 23-28, 1998.
荒井正行, 佐久間俊雄, 水谷朋史, 岸本喜久雄, 斉藤正弘. プラズマ溶射ジルコニア皮膜の曲げ強さの温度依存性, Journal of the Ceramic Society ofJapan, Vol. 106, No. 2, pp. 198-202, 1998.
KIKUO KISHIMOTO. Crack Initiation Behavior of ABS Resin Under Mode I and Mixed Mode Loading, Materials Science Research International, Vol. 3, No. 3, pp. 158, 1997.
KIKUO KISHIMOTO. Effects of Hold-Time on Thermal Fatigue Life of Solder Joints, Transactions of the Japan Society of Mechanical Engineers, Vol. 63, No. 611, pp. 1594, 1997.
KIKUO KISHIMOTO. Regularization of Numerical Inversion of Laplace Transform for the Inverse Analysis of Impact Force, Transactions of the Japan Society of Mechanical Engineers, Vol. 63, No. 616, pp. 2503, 1997.
KIKUO KISHIMOTO. Evaluation of Ultra-Violet Degradation on PP and PC by Layering-Films Exposure Test, Transactions of the Japan Society of Mechanical Engineers, Vol. 63, No. 606, pp. 437, 1997.
KIKUO KISHIMOTO. Method of Test for Fracture Toughness of Silica-Particulated-Filled Epoxide Resins and Effects of Moisture Absorption on Fracture Properties, Transactions of the Japan Society of Mechanical Engineers, Vol. 62, No. 596, pp. 902, 1996.
KIKUO KISHIMOTO. A Continuum Interface Debonding Model and Application to Matrix Cracking of Composites, JSME International Journal, Series A, Vol. 39, No. 4, pp. 496, 1996.
KIKUO KISHIMOTO. Inverse Analysis Related to Stress Separation in Thermoelastic Stress Analysis, Transactions of the Japan Society of Mechanical Engineers, Vol. 62, No. 597, pp. 1204, 1996.
Kikuo KISHIMOTO, Hirotsugu INOUE, Makoto HAMADA, Toshikazu SHIBUYA. Time-Frequency Analysis of Dispersive Waves by Means of Wavelet Transform, Transactions of the ASME, Journal of Applied Mechanics, The American Society of Mechanical Engineers, Vol. 62, No. 4, pp. 841-846, Dec. 1995.
KIKUO KISHIMOTO. Time-Frequency Analysis of Dispersive Stress Waves by Means of Wavelet Transform (Identification on Group Velocity and Application to Ultrasonic Materials Evaluation), Transactions of the Japan Society of Mechanical Engineers, Vol. 61, No. 581, pp. 153, 1995.
KIKUO KISHIMOTO. Effects of High Humidity and High Temperature Exposure on Fracture Behavior of Polycarbonate and Cellulose-Acetate, Journal of Material Science Japan, Vol. 43, No. 493, pp. 1218, 1994.
KIKUO KISHIMOTO. Changes of Mechanical and Chemical Properties of PP and PC Films Due to UV-Light-Induced Degradation, Transactions of the Japan Society of Mechanical Engineers, Vol. 60, No. 574, pp. 1450, 1994.
KIKUO KISHIMOTO. Axisymmetric Frictional Contact Problem for Elastic Half-Space with Surface Layer, Transactions of the Japan Society of Mechanical Engineers, Vol. 60, No. 575, pp. 1572, 1994.
KIKUO KISHIMOTO. Elastic Singular Stress Field and Small-Scale Yielding at Bonding Edge of Dissimilar Materials, Transactions of the Japan Society of Mechanical Engineers, Vol. 60, No. 579, pp. 2596, 1994.
KIKUO KISHIMOTO. Measurement of Elastic Modulus of Functionally Gradient Material Using Inverse Analysis, Transaction of the Japan Society of Mechanical Engineers, Vol. 59, No. 557, pp. 197-202, 1993.
KIKUO KISHIMOTO. Measurement of Strain Distribution for Polymer Film by Lattice Pattern Recognition using Neural Network, Transaction of the Japan Society of Mechanical Engineers, Vol. 59, No. 559, pp. 535-540, 1993.
KIKUO KISHIMOTO. Inverse Analysis of the Magnitude and Direction of Impact Force, Transaction of the Society of Mechanical Engineers, Vol. 59, No. 559, pp. 572-579, 1993.
KIKUO KISHIMOTO. Finite Element Analysis on Fracture of WC, Transaction of the Japan Society of Mechanical Engineers, Vol. 59, No. 560, pp. 1011-1016, 1993.
KIKUO KISHIMOTO. Effects of Humidity on the Mechanical Behavior of Polyami-6 and Celluolose-Acetate, Transaction of the Japan Society of Mechanical Engineers, Vol. 59, No. 558, pp. 422-427, 1993.
KIKUO KISHIMOTO. Numerical Analysis of Sliding Contact Problems by Boundary Element Method, Transaction of the Japan Society of Mechanical Engineers, Vol. 59, No. 562, pp. 1556-1561, 1993.
KIKUO KISHIMOTO. Boundary Element Analysis of Thermoelastic Contact Problems, Transactions of the Japan Society of Mechanical Engineers, Vol. 58, No. 555, pp. 2111-2118, 1992.
KIKUO KISHIMOTO. Elastic-Plastic Analysis on Dissimilar Materials by Finite-Element Method, Transactions of the Society of Mechanical Engineers, Vol. 58, No. 550, pp. 887-894, 1992.
KIKUO KISHIMOTO. Estimation of Impact Load by Inverse Analysis (Optimal Transfer Function for Inverse Analysis), Transactions of the Japan Society of Mechanical Engineers, Vol. 57, pp. 543, 1991.
KIKUO KISHIMOTO. Numerical Laplace Transformation and Inversion Using the Fast Fourier Trarnsform, Transactions of the Japan Society of Mechanical Engineers, Vol. 57, pp. 542, 1991.
KIKUO KISHIMOTO. Effects of Hydrostatic Stress and Strain Hardening Exponent on Near-Tip Fields Under Mixed Mode Loading, Transactions of the Japan Society of Mechanical Engineers, Vol. 57, pp. 539, 1991.
KIKUO KISHIMOTO. A Study on Environmental Degradation of Plastic Films by IR Spectroscopy, Transation of the Japan Society of Mechanical Engineers, Vol. 57, pp. 541, 1991.
KIKUO KISHIMOTO. Study on Differential Aeraction Cell Corrosion owing to Differential Flow Rate(Analysis by Boundary Element Method), Zairyo-to-Kankyo, No. 40, pp. 401-406, 1991.
KIKUO KISHIMOTO. Optimum Location of Electrode in Cathodic Protection System, Transactions of the Japan Society of Mechanical Engineers, Vol. 57, pp. 538, 1991.
KIKUO KISHIMOTO. Evaluation on Low Temperature Strength of Plastic Film for Ballon, Transaction of the Japan Society of Mechanical Engineers, Vol. 57, pp. 534, 1991.
坂田勝, 木村康治, 岸本喜久雄, 郭士傑, 箕輪智夫. 有限要素法による超音波モータのステータの振動解析, 日本機械学会論文集(Ｃ編), Vol. 56, No. 525, pp. 1115-1124, May 1990.
KIKUO KISHIMOTO. Elastic-Plastic Fracture Behavior of an Aluminum Allay under Mixed Mode Conditions, Transactions of the Japan Society of Mechanical Engineers, Vol. 56, pp. 524, 1990.
KIKUO KISHIMOTO. An Elastic-Plastic Finite Element Analysis of a Crack on a Bimaterial Interface, Transactions of the Japan Society of Mechanical Engineers, Vol. 56, pp. 523, 1990.
KIKUO KISHIMOTO. High Temperature Impact Fracture Toughness Testing of Alumina and Alumina-Ziroconia Composite, Journal of the Society of Material Science Japan, Vol. 39, pp. 447, 1990.
KIKUO KISHIMOTO. Finite Element Study on Size Requirement for Stress Intensity Factor Characterization under Biaxial Loading, International Journal of Fracture, pp. 43, 1990.
KIKUO KISHIMOTO. Boundary Element Analysis of an Inverse Problem in Galvanic Corrosion, JAME International Journal, Vol. 32, pp. 2, 1989.
KIKUO KISHIMOTO. A Study of the Interaction and Coalescence of Two Coplanar Fatigue Cracks in Bending, Fatigue and Fracture of Engineering Material and Structure, Vol. 12, pp. 3, 1989.
KIKUO KISHIMOTO. Finite Element Analysis on Hole Growth near a Crack Tip under Mixed Mode Conditions, Transactions of the Japan Society of Mechanical Engineers, Vol. 55, pp. 512, 1989.
KIKUO KISHIMOTO. A Numerical Investigation of th Interaction and Coalescence of Twin Coplanar Semi-Elliptical Fatigue Cracks, International Journal of Fatigue, Vol. 11, pp. 2, 1989.
KIKUO KISHIMOTO. Measurement of Dynamic Fracture Toughness of Ceramic Material at Elevated Temperatues by Impact Test with Free End Bend Specimen, Journal of the Society of Material Science Japan, Vol. 37, pp. 419, 1988.
KIKUO KISHIMOTO. Prediction of Potential and Curvent Density in Galvanic Corrosion and Cathodic Protection Systems, Journal of the Society of Materials Science Japan, Vol. 37, pp. 418, 1988.
KIKUO KISHIMOTO. A Simple Method for Evaluating the (]J1040[)-ineegral of an Impacted Three-Point Bend Specimen, Transactions of the Japan Society of Mechanical Engineers, Vol. 53, pp. 489, 1987.
KIKUO KISHIMOTO. Galvanic Corrosion of Cast Iron-Stainless Steel Couple (Prediction by Boundary Element Method), Journal of the Society of Matersas Science Japan, Vol. 35, pp. 394, 1986.
KIKUO KISHIMOTO. Finite Element Computation of Dynamic Stress Intersity Factor for a Rapidly Propagating Crack Using (]J1040[)-integral, Transactions of the Japan Society of Mechanical Engineers, Vol. 52, pp. 474, 1986.
KIKUO KISHIMOTO. A Measuring System for Dynamic Stress Intensity Factors Using a FFT Analyzer, Journal of the Society of Material Science Japan, Vol. 35, pp. 359, 1986.
KIKUO KISHIMOTO. Crack Growth and Instable Fracture of Rotating Disks, Journal of Engineering Materials and Technology, pp. 107, 1985.
KIKUO KISHIMOTO. Specimen Size Requirement for J-Characterization under Mixed Mode Loading, Transactions of the Japan Society of Mechanical Engineers, Vol. 54, pp. 501, 1985.
KIKUO KISHIMOTO. A Study on the Accuracy of (]J1040[)-integral Calculation by Finite Element Method, Transactions of the Japan Society of Mechanical Engineers, Vol. 54, pp. 504, 1985.
KIKUO KISHIMOTO. Three-Dimensional Elastic-Plastic Finite Element Analysis of (]J1040[)-integral in Three-Point-Bend Specimen, Transactions of the Japan Society of Mechanical Engineers, Vol. 50, pp. 453, 1984.
KIKUO KISHIMOTO. Elastic-Plastic Fracture Mechanics Analysis by Combination of Boundary and Finite Element Methods, Transactions of the Japan Society of Mechanical Engineers, Vol. 50, pp. 460, 1984.
KIKUO KISHIMOTO. Effects of Microvoids on Crack Blunting and Initiation in Ductile Materials, Transactions of the Japan Society of Mechanical Engineers, Vol. 50, pp. 454, 1984.
KIKUO KISHIMOTO. On Fracture Criterion of Polymer, Transactions of the Japan Society of Mechanical Engineers, Vol. 46, pp. 439, 1983.
KIKUO KISHIMOTO. Distribution of Crack Extension Force, the (]J1040[)-integrul, along a Through-Crack-Front of a Plate, International Journal of Fracture, pp. 23, 1983.
KIKUO KISHIMOTO. Energy-Release Rate in Elastic-Plastic Fracture Problems, Journal of Applied Mechanics, pp. 48, 1981.
KIKUO KISHIMOTO. Simple Formula for Dynamic Stress Intersity Factor of Pre-Cracked Charpy Specimen, Engineering Fracture Mechanics, Vol. 13, pp. 3, 1980.
KIKUO KISHIMOTO. Finite Element Analysis of Dynamic Stress Intensity Factor Using (]J1040[)-integral, Transactions of the Japan Society of Mechanical Engineers, Vol. 46, pp. 406, 1980.
KIKUO KISHIMOTO. Fracture Mechanics Parameters Characterizing Crack Extension, Transactions of the Japan Society of Mechanical Engineers, Vol. 46, pp. 410, 1980.
KIKUO KISHIMOTO. Analysis of Dynamic Stress Intensity Factor and Computer Simulation of Fast Crack Propagation by Finite Element Method using Singular Element, Transactions of the Japan Society of Mechanical Engineers, Vol. 45, pp. 393, 1979.

国際会議発表 (査読なし・不明)

KIKUO KISHIMOTO. Interfacial Crack Problem and Cohesive Zone Model, Proceedings of Third International Conference on Theoretical, Applied, Computational and Experimental Mechanics, pp. 11-12, 2004.
Kikuo Kishimoto, Masaki Omiya. A Cohesive Zone Model and Interfacial Crack Problems, Proceedings of the IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength, pp. 301-310, 2004.
Satoko Fukahori, Kikuo Kishimoto, Jeffrey Cross, Shinnosuke Obi, Makoto Yamamoto, Yugo Saito. NIER Tuning Test Item Bank- Assessment of Higher Education Learning Outcomes in Engineering,, International Symposium on Higher Education Learner-centred Education and Higher Education Quality Assurance Amid Covid, Feb. 2022.
Kenji Inoue, Farid Triawan, Kazuaki Inaba, KIKUO KISHIMOTO, Masashi Nishi, Michiyo Sekiya, Kunihiko Sekido, Akihito Saitoh. Identification of delamination behavior of multilayer thin films polymer by finite element simulation of nanoindentation test, FEOFS 2018, Aug. 2018.
Yoshiya Kawamura, Farid Triawan, Kazuaki Inaba, KIKUO KISHIMOTO, Hiroaki Nakamoto, Hayabusa Keisuke. Effect of cavitation impacts on crack propagation in epoxy resin subjected to tensile loading, 10th International Symposium on Cavitation (CAV2018), May 2018.
Su Ziyi, Kazuaki Inaba, Farid Triawan, KIKUO KISHIMOTO. Evaluation of the Deformation of 3D Printed Shape Memory Bilayer Beam by Classical Beam Theory, 5th Joint-Symposium on Mechanics of Advanced Materials & Structures (JSMAMS), Dec. 2017.
MING JI, Kazuaki Inaba, Farid Triawan, Kikuo Kishimoto. Theoretical Analysis on Transient Response of Circular Plate Coupled with Fluid, The 5th Joint-Symposium on Mechanics of advanced Materials and Structure, Dec. 2017.
Farid Triawan, Kazuaki Inaba, Kikuo Kishimoto. Measurement of Cavitation Intensity for Fluid Machinery Application, The 8th Japan-Taiwan Workshop on Mechanical Engineering and Aerospace, No. G1, Nov. 2016.
Tomohisa Kojima, Kazuaki Inaba, Kosuke Takahashi, KIKUO KISHIMOTO. Mechanics of Fluid-Structure Interaction associated with Wave Propagation across Solid-Fluid Interface, 2015 Joint-Symposium on Mechanics of Advanced Materials & Structures (JSMAMS2015), Nov. 2015.
Kosuke Takahashi, Bentang Arief Budiman, inaba, kishimoto kikuo. Evaluation of interfacial strength of fiber/matrix in composites by characteristic length of Tresca stress contour, The 3rd International Workshops on Advances in Computational Mechanics, Abstracts of 3rd International Workshops on Advances in Computational Mechanics, p. 153, Oct. 2015. 公式リンク
Tomohisa Kojima, Kazuaki Inaba, Kosuke Takahashi, KIKUO KISHIMOTO. Effect of wave propagation across solid-fluid interface on fluid-structure interaction, 2015 Beihang Univ.-Tokyo Tech Joint Workshop on Nano/Micro-Engineering, Oct. 2015.
Tomohisa Kojima, Kazuaki Inaba, Kosuke Takahashi, KIKUO KISHIMOTO. Wave Propagation across Solid-Fluid Interface with Fluid-Structure Interaction, UK-Japan Symposium 2015 on Materials Under Extreme Conditions: Effects of Temperature, High Strain Rate and Irradiation, pp. 42, Sept. 2015. 公式リンク
Kosuke Takahashi, masakazu furuta, shuzo oshima, kazuaki inaba, kikuo kishimoto. Dependence of Capillary Speed on Capillary Bending of Thin Plates, ASME 2015 Applied Mechanics and Materials Conference, McMAT2015, The proceedings of McMAT2015, pp. 73, June 2015. 公式リンク
Kosuke Takahashi, kensuke namiki, kazuaki inaba, kikuo kishimoto. Instant sintering of silver nano-ink on CFRP laminate for structural health monitoring, International Conference on Advances in Composite Materials and Structures, Apr. 2015. 公式リンク
Bentang Arief Budiman, Kosuke Takahashi, Kazuaki Inaba, KIKUO KISHIMOTO. A Continuum Model of Interface to Investigate Stress Transfer on Fiber-Matrix Composite, International Conference on Advances in Composite Materials and Structures, 2015.
Bentang Arief Budiman, Kosuke Takahashi, Kazuaki Inaba, KIKUO KISHIMOTO. The Influence of Elastic Bonding Behavior at Fiber-Matrix Interface to Composite Performance, 11th International Conference on Durability Analysis of Composite Systems, 2014.
yuichiro yamagata, K. Takahashi, K. Inaba, K. Kishimoto, Y. Inao, S. Tomioka, Toshio Sugizaki. Dependence of tack performance and viscoelastic behavior on thickness of pressure-sensitive adhesive, 5th World Congress on Adhesive and Release Phenomena, 配布USB, p. 109, 2014.
Minoru Nagai, Kazuaki Inaba, Kosuke Takahashi, KIKUO KISHIMOTO. Filtering effects of periodic structure in water hammer, The 8th International Symposium on Impact Engineering, The 8th International Symposium on Impact Engineering (ISIE2013) Abstracts Book, 9, Sept. 2013.
Tatsuro Hori, Kazuaki Inaba, Kosuke Takahashi, KIKUO KISHIMOTO. Transient of Wave Propagation around a Large Particle in Pipes Filled with Water, The 8th International Symposium on Impact Engineering, The 8th International Symposium on Impact Engineering (ISIE2013) Abstract book, Page 95, Sept. 2013.
Kosuke Takahashi, Takahiro. Fujimura, Kazuaki Inaba, Kikuo Kishimoto. ELECTRICAL BEHAVIOR OF A CFRP UNIDIRECTIONAL LAMINATE UNDER TEMPERATURE VARIATION, THE 19TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, Proceedings of ICCM19, Page 816-824, July 2013. 公式リンク
B. A. Budiman, K. Takahashi, K. Inaba, K. Kishimoto. Stress Contour Utilization for Estimating Interfacial Properties of Fiber/Matrix Composite, 19th International Conference on Composite Materials, July 2013.
K. Inaba, K. Takahashi, K. Kishimoto. Frequency and dispersion of flexural waves in fluid-filled tubes subject to axial impact, IUTAM symposium on materials and interfaces under high strain rate and large deformation, Proceedings of IUTAM symposium on materials and interfaces under high strain rate and large deformation, June 2013.
B. A. Budiman, K. Takahashi, K. Inaba, K. Kishimoto. Stress Distribution Contour in Composite Matrix for Evaluation of Interfacial Properties, 9th International Conference on Fracture and Strength of Solids, June 2013.
Kosuke Takahashi, Masashi Shimizu, Kazuaki Inaba, KIKUO KISHIMOTO, Yoichi Inao, Toshio Sugizaki. Peeling behavior of pressure sensitive adhesives under tension, The 9th International Conference on Fracture & Strength of Solids, June 2013. 公式リンク
Takahiro Fujimura, Kosuke Takahashi, Kazuaki Inaba, KIKUO KISHIMOTO. Simultaneous measurement of strain and temperature with electrical resistance in CFRP structure, The 9th International Conference on Fracture & Strength of Solids(FEOFS), 2013.
Kosuke Takahashi, Takahiro Fujimura, Kazuaki Inaba, Kikuo Kishimoto. Anisotropic electrical property of graphite/polymer composites under temperature change, American Society for Composites 27th Technical Conference, Proceedings of American Society for Composites 27th Technical Conference, Oct. 2012.
B. A. Budiman, K. Takahashi, K. Inaba, K. Kishimoto. Evaluation of Interfacial Properties Based on Stress Distribution Contour in Carbon Fiber-Epoxy Composite, 2nd ACIKITA International Conference on Science and Technology, 2nd ACIKITA International Conference on Science and Technology, pp. 34-48, Aug. 2012.
Kosuke Takahashi, Takahiro Fujimura, Kazuaki Inaba, KIKUO KISHIMOTO. Thermal Influence on Electrical Resistance of CFRP for Structural Health Monitoring, Asian Pacific Conference on Fracture and Strength - Mechanics and Materials 2012, Proceedings of the APCFS-MM 2012, Page 205-206, May 2012. 公式リンク
KIKUO KISHIMOTO, Z.-H. Qian, S. Hirose. Theoretical Analysis on a Generalized Ferroelectric Domain Layer Wave in a Layered Piezoelectric/Elastic Structure, Asian Pacific Conference on Fracture and Strength-Mechanics and Materials 2012, pp. 139-140, 2012.
Satoshi Kumagai, Kazuaki Inaba, Kikuo Kishimoto. Evaluation of protective film by scratch test, EMAP(International Conference on Electronics Materials and Packaging), Dec. 2011.
KIKUO KISHIMOTO, David Lee, Yotaro Shinozawa, Kazuaki Inaba, Rehana Afrin, Atsushi Ikai. Mechanical Analysis of the Bio Cell Subjected to AFM Loading, Internattional Workshop on Biomedical Engineering & Biomechanics, Internattional Workshop on Biomedical Engineering & Biomechanics, Xi'an Jiaotong University, p. 33, Aug. 2011.
KIKUO KISHIMOTO, naoya saiki, Kazuaki Inaba. Peering Strength of Adhesive Films for Semiconductor Packages, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Xi'an Jiaotong University, p. 3, Aug. 2011.
Wang Yize, KIKUO KISHIMOTO. Progress on wave propagation in nanoplates by nonlocal continuum, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Xi'an Jiaotong University, p. 16, Aug. 2011.
FARID TRIAWAN, KIKUO KISHIMOTO, Kazuaki Inaba, Tohru Hashimoto. Theoretical Analysis on the Elastic Behaviorof Metal foam under Flexural Loading, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Joint Symposium on Mechanics of Advanced Materials & Structures 2011, Xi'an Jiaotong University, p. 18, Aug. 2011.
Hiroto Takahashi, Kazuaki Inaba, Kollika Nguon, Kikuo Kishimoto. Solid-liquid Interactions In Slurry Hammer, ASME 2011 Pressure Vessels & Piping Conference, July 2011.
Takeshi Nishimura, Kazuaki Inaba, Hiroyuki Ushifusa, Kikuo Kishimoto. Effect Of Single Bubble On Water-tube Interaction Subject To Axial Impact, ASME 2011 Pressure Vessels & Piping Conference, July 2011.
Farid TRIAWAN, Kikuo KISHIMOTO, Kazuaki INABA, Tadaharu ADACHI, Zhijia LIN, Toru HASHIMURA. Measuring the Flexural Modulus of Metal Foam, the 5th AOTULE International Postgraduate Students Conference on Engineering, Proceedings of the 5th AOTULE International Postgraduate Students Conference on Engineering, pp. 154-157, Nov. 2010.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Torsional wave propagation in nanotubes with small scale effects, The Second Asian Conference on Mechanics of Functional Materials and Structures, Proceeding of The Second Asian Conference on Mechanics of Functional Materials and Structures, Oct. 2010. 公式リンク
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Progress on wave propagation and localization in band gap materials, Joint-Symposium on Mechanics of Advanced Materials & Structures, Proceeding ofJoint-Symposium on Mechanics of Advanced Materials & Structures, Aug. 2010.
K. Inaba, H. Takahashi, N. Kollika, K. Kishimoto. Visualization and measurements of wave propagations in slurry hammers, 2010 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, Proceedings of the 2010 SEM Annual Conference & Exposition on Experimental & Applied Mechanics, Society for Experimental Mechanics, pp.1-7, July 2010.
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Flexural wave localization in randomly disordered periodic beams with axial load, 8th International Conference on Fracture and Strength of Solids, Proceeding of 8th International Conference on Fracture and Strength of Solids, June 2010. 公式リンク
joris prou, KIKUO KISHIMOTO, Andrei Constantinescu. Identification of Thin Films Young's Modulus from Continuous Indentation Test and Inverse Analysis, The IV European Conference on Computational Mechanics, Proceedings of the IV European Conference on Computational Mechanics, May 2010. 公式リンク
Naoya SAIKI, Kazuaki INABA, K. Kishimoto. STUDY ON PEELING BEHAVIOR OF ADHESIVE FILMS FOR SEMICONDUCTOR PACKAGES, Asian Pacific Conference for Materials and Mechanics 2009, Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, JSME, pp. 1-4, Nov. 2009.
David Lee, Kikuo Kishimoto, Atsushi Ikai, Kazuaki Inaba. MONTE CARLO SIMULATION STUDY OF A RED BLOOD CELL CYTOSKELETON UNDER AFM LOADING, Asian Pacific Conference for Materials and Mechanics 2009, Proceedings of Asian Pacific Conference for Materials and Mechanics 2009, JSME, pp. 1-4, Nov. 2009.
KIKUO KISHIMOTO, David Lee, ATSUSHI IKAI, Machida Shinichi. Monte Carlo Simulation Study of a Red Blood Cell Cytoskeleton under AFM Loading, The 5th Tokyo Tech.-POSTECH-KUN Joint Workshop on Mechanical Engineering, The 5th Tokyo Tech.-POSTECH-KUN Joint Workshop on Mechanical Engineering, pp. 18-19, Sept. 2009.
KIKUO KISHIMOTO, joris prou, TADAHARU ADACHI, Andrei Constantinescu. Indentification of Elastic Material Parameters from Indentation Test, The 5th Tokyo Tech.-POSTECH-KUN Joint Workshop on Mechanical Engineering, The 5th Tokyo Tech.-POSTECH-KUN Joint Workshop on Mechanical Engineering, p. 56, Sept. 2009.
FARID TRIAWAN, TADAHARU ADACHI, KIKUO KISHIMOTO, Tohru Hashimura. Evaluation On Elastic Modulus of Closed-Cell Aluminum Alloy Foam, Asian Pacific Conference for Materials and Mechanics 2009, 2009.
Kikuo Kishimoto. Some Research Projects Conducted by Mechanics of Materials Group at Tokyo Institute of Technology, The AOTULE Student Workshop jointly with The 5th KAIST-TOKYO Tech Mechanical Engineering Workshop, The AOTULE Student Workshop jointly with The 5th KAIST-TOKYO Tech Mechanical Engineering Workshop Proceeding, The AOTULE Student Workshop jointly with The 5th KAIST-TOKYO Tech Mechanical Engineering Workshop, p. 1, Nov. 2007.
Masaki Omiya, Kikuo Kishimoto. Effect of UV-ray irradiation on the Crack Formation of PET/ITO film, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, pp. 151-155, Oct. 2007.
Kentaro Kozuki, Masaki Omiya, KIKUO KISHIMOTO. Interfacial Strength Evaluation for Thin Film Coating Systems by Nanoindentation Test, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, pp. 329-331, Oct. 2007.
Ryota MASUDA, Hirotsugu INOUE, Kikuo KISHIMOTO. Finite Element Analyses of Peel Test for Thin Film Adhesion, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, The 4th Japan-Taiwan Workshop on Mechanical and Aerospace Engineering, pp. 224-227, Oct. 2007.
Kentaro Kozuki, Masaki Omiya, Kikuo Kishimoto. Delamination Behavior of Hard Film on Soft Substrate During Nano- and Micro- Indentation, MicroNanoReliability 2007 Abstract, MicroNanoReliability 2007 Abstract, MicroNanoReliability 2007 Abstract, p. 133, Sept. 2007.
Masaki Omiya, Kikuo Kishimoto. UV-ray Irradiation Effects on Channeling Crack Formation of Ceramic Thin Film on Polymer Substrate, MicroNanoReliability 2007, MicroNanoReliability 2007 Abstract, MicroNanoReliability 2007, p. 182, Sept. 2007.
M. Nizar Machmud, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Evaluation and Characterization of Plastics-Made Sheet Type Components under Impact, FEOFS2007, FEOFS2007 Abstracts, FEOFS2007, p. 124, Aug. 2007.
L. H. Anh, I. S. Putra, T. Dirgantara, D. Widagdo, G. Homma, KIKUO KISHIMOTO. Study of the Behavior of Square Tube and Tubular Hat Thin-Walled Sections Subjected to Low Velocity Axial Impact Load, FEOFS2007, FEOFS2007 Abstracts, FEOFS2007, p. 125, Aug. 2007.
L. H. Anh, I. S. Putra, T. Dirgantara, D. Widagdo, G. Homma, KIKUO KISHIMOTO. Quasi-Static Axial Crushing of Thin-Walled Double-Hat Sections Prismatic Columns, FEOFS2007, FEOFS2007 Abstracts, FEOFS2007, p. 126, Aug. 2007.
Zhenghua QIAN, Feng JIN, Zikun Wang, Kikuo KISHIMOTO. Effect of Initial Stress on the Love Waves In an Elastic Half-space with a Functionally Graded Layer, FEOFS2007, FEOFS2007 Abstracts, FEOFS2007, p. 242, Aug. 2007.
Ryota MASUDA, Hirotsugu INOUE, Kikuo KISHIMOTO. Peeling rate dependency of delamination behavior of adhesives, FEOFS2007, FEOFS2007 Abstracts, FEOFS2007, p. 468, Aug. 2007.
M. Nizar Machmud, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Evaluation and Characterization of Engineering Thermoplastics-Made Sheet Type Components under Impact, NAE2007, Conference Booklet NAE2007, NAE2007, pp. 44-45, May 2007.
L. H. Anh, I. S. Putra, D. Widagdo, G. Homma, T. Dirgantara, KIKUO KISHIMOTO. Energy Absorption Behavior of Square Tube and Tubular Hat Thin-Walled Sections Subjected to Low Velocity Axial Impact Load Using Numerical Analysis, NAE2007, Conference Booklet NAE2007, NAE2007, pp. 57-58, May 2007.
Kikuo Kishimoto, Akira Shinozaki. Molecular Chain Network Model for Mechanical Behavior Analysis of Polymers, Conference on Computational Mechanics & Numerical Analysis 2006, Proceeding of Conference on Computational Mechanics & Numerical Analysis 2006, pp. 14-22, May 2006.
M. Nizar Machmud, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. Impact-Induced Failure Characteristics of PC/ABS(50/50) Blends with Poor/Good Weld-lines Strength, Conference on Computational Mechanics & Numerical Analysis 2006, Proceeding of Conference on Computational Mechanics & Numerical Analysis 2006, pp. 197-206, May 2006.
Masaki Omiya, Kikuo Kishimoto, Masazumi Amagai. Fatigue Crack Growth in Lead-free Solder Joints, 2005 International Symposium on Electrics Materials and Packaging, Proceedings of 2005 International Symposium on Electrics Materials and Packaging, pp. 232-237, Dec. 2005.
Takeshi Miyazaki, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto, Masazumi Amagai. Evaluation of Fatigue Strength for Solder Joints after Thermal Aging, 2005 International Symposium on Electrics Materials and Packaging, Proceedings of 2005 International Symposium on Electrics Materials and Packaging, pp. 215-219, Dec. 2005.
Takahiro Omori, Hirotsugu Inoue, Noriyasu Kawamura, Minoru Mukai, Kikuo Kishimoto, Takashi Kawakami. Evaluation of Drop Impact Load for Portable Electronic Components, 2005 International Symposium on Electrics Materials and Packaging, Proceedings of 2005 International Symposium on Electrics Materials and Packaging, pp. 262-267, Dec. 2005.
Akira Shinozaki, Kikuo Kishimoto, Hirotsugu Inoue. Simulation of Tensile Deformation Behavior of Polymer by Chain Network Model, 2005 International Symposium on Electrics Materials and Packaging, Proceedings of 2005 International Symposium on Electrics Materials and Packaging, pp. 150-155, Dec. 2005.
HUSAINI, Kikuo KISHIMOTO, Munetsugu HANJI, Masaki OMIYA, Toshikazu SHIBUYA. Mixed Mode Crack Extension Behavior of A2024-T351 Aluminum, Proceedings of Experimental & Theoretical Mechanics 2002, pp. 69-76, 2002.
Masaki Omiya, Kikuo Kishimoto. Cohensive Zone Approach to the Mixed Mode Fracture Criterion of the Bonding Interface, Proceedings of Experimental & Theoretical Mechanics 2002, pp. 77-83, 2002.
C. Hwu, M. Oomiya, K. Kishimoto. Stress Singularities of Multi-Bonded Anisotropic Wedges, Proceedings of APCFS & ATEM '01, JSME-MMD, Oct.20-22, 2001,(JSME No.01-203), pp. 740-743, 2001.
K. Kishimoto, M. Omiya, W. Yang. Fracture mechanics of bonding interface -- A cohesive zone model --, Proceedings of E-MRS2001, Spring Meeting Symposium, Strasbourg, June5-8,, pp. J-5, 2001.
K. Kishimoto, M. Omiya. Fracture Mechanics of Bonding Interface, Proceedings of The First Taiwan-Japan Workshop on Mechanical and Aerospace Engineering, pp. 280-289, 2001.
M. Omiya, K. Kishimoto, T. Shibuya. Finite Element Analysis on Fracture Behavior of the Interface Crack with Plastic Deformation, Developments in Fracture Mechanics for the New Century, The Society of Materials Science, pp. 140-145, 2001.
K. Kishimoto, M. Omiya, M. Amagai. A Mechanical Reliability Assessment of Solder Joints, International Symposium on Electronic Materials and Packaging, pp. 8-14, 2001.
H. Inoue, K. Kishimoto, T. Shibuya. NDE of Plates and Coatings using Contact-Type Line-Focus Ultrasonic Probe, Nondestructive Characterization of Materials X (Proceedings of the 10th International Symposium on Nondestructive Characterization of Materials, Karuizawa, Japan, 2000), Elsevier Science, pp. 143-150, 2001.
M. Omiya, K. Kishimoto, T. Shibuya. The Influence of Plastic Deformation on Interface Fracture Behavior, Proce. Meso-Mechanical Aspects of Material Behavior, pp. 223-227, 2000.
Kikuo Kishimoto. Fracture Behaviours of Advanced Polymer Composites under Mixed Mode Loading, Proce. Meso-Mechanical Aspects of Material Behavior, pp. 177-186, 2000.
K.Kishimoto, K. Masuda, M. Omiya, T. Shibuya, M. Amagai. Effect of intermetallic compound layer development on mechanical strength of 63Sn-37Pb solder joints, Proc. 3rd International Conference and Poster Exhibition Micro Materials, pp. 560-565, 2000.
Keisuke Hayabusa, Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya. Inverse Analysis to Determine Contact Stresses Using Photoelasticity, Abstracts International Symposium on Inverse Problems in Engineering Mechanics, pp. 53-56, 2000.
K.Kishimoto, M.Oomiya, T, Shibuya, N.Kawamura, T.Kawakami. Strength Ecaluation of Semiconductor Encapsulant Resin, Proc. 2000 Workshop on Porimeric Materials for Microelectronics and Photonics Applications, pp. 1, 2000.
Kikuo Kishimoto, Mitsuo Notomi, Toshikazu Shibuya, Noriyasu Kawamura, Takashi Kawakami. Failure Mechanics and Mechanisms of Micro-Electronic Packaging (Fracture Behavior of Silica Particulate Filled Epoxide Resin for Semiconductor Packaging), Materials Mechanics/ Fracture Mechancis/ Micro Mechanics, T.Winkler and A.Schubert Eds., pp. 10-17, 1999.
Minoru Mukai, Hiroyuki Takahashi, Takashi Kawakami, Kuniaki Takahashi, Ken Iwasaki, Kikuo Kishimoto. Mechanical Fatigue Tests of Solder Bumps, Advances in Electronic Packaging, EEP, Vol. 26, No. 1, pp. 449-455, 1999.
T.J.Wang, K.Kishimoto, M.Notomi, T.Shibuya. Effect of Triaxial Stress Constraint on the Fracture and Toughening Mechanisms of PC/ABS Blends, Asian Paciffic Conference for Fracture and Strength '99(APCFS '99), pp. 41, 1999.
Omiya Masaki, Kishimoto Kikuo, Shibuya Toshikazu. Finite Element Analysis of Interface Crack in Bimaterial Media Using Cohesive Force Model, Asian Pacific Conference for Fracture and Strength '99(APCFS'99), pp. 42, 1999.
Keisuke Hayabusa, Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya. Boundary Element Inverse Analysis for Stress Separation in Thermoelastic Stress Analysis, International Conference on Advanced Technology in Experimental Mechanics '99(ATEM '99), pp. 288-293, 1999.
Keisuke Hayabusa, Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya. Inverse Analysis Related to Stress Separation in Photoelasticity, Progress in Experimental and Computational Mechanics in Engineering and Material Behaviour (ECM '99), pp. 319-324, 1999.
Keisume Hayabusa, Hirotsugu Inoue, Kikuo Kishimoto, Toshikazu Shibuya. Boundary Element Inverse Analysis for Photoelasticity, Inverse Problems in Engineering Mechanics, M.Tanaka, G.S.Dulikravich editors, pp. 603-612, 1998.

国内会議発表 (査読なし・不明)

赤堀健太, 増田悠治, 因幡和晃, Farid Triawan, 岸本喜久雄, 橋村徹. 液体を充填した二重円管の衝撃吸収圧壊特性, 日本機械学会 M&M2018材料力学カンファレンス, OS0228 CopyrightC2018 一般社団法人日本機械学会, Dec. 2018.
小塚涼平, 因幡和晃, トリアワンファリド, 岸本喜久雄, 中本浩章, 早房敬祐. 引張キャビテーション壊食試験におけるエポキシ樹脂のき裂進展速度における温度依存性, キャビテーションに関するシンポジウム(第 19 回), キャビテーションに関するシンポジウム(第 19 回), Oct. 2018.
新井秀和, 高橋航圭, 因幡和晃, 岸本喜久雄. 繊維－樹脂界面のはく離進展解析による界面力学特性の評価, 日本機械学会 M&M2017 材料力学カンファレンス, M&M2017 材料力学カンファレンス講演論文集, No. 17-5, pp. 827-829, Oct. 2017. 公式リンク
檜作大樹, 高橋航圭, 因幡和晃, 岸本喜久雄. ぬれ性起因の平板変形を利用した円筒構造形成, 日本機械学会 M&M2017 材料力学カンファレンス, M&M2017 材料力学カンファレンス講演論文集, No. 17-5, pp. 271-273, Oct. 2017. 公式リンク
AKCAM KUBRA INCI, 因幡和晃, Triawan Farid, 高橋航圭, 岸本喜久雄. 水面に接した平板近傍における気泡崩壊時のジェットパターン, キャビテーションに関するシンポジウム（第 18 回）, No. 00037, Dec. 2016. 公式リンク
松尾高広, 高橋航圭, 大島修造, 因幡和晃, 岸本喜久雄. 毛管現象が及ぼす薄板変形における流体摩擦力の影響, 日本機械学会 M&M2016 材料力学カンファレンス, 2016. 公式リンク
石井智弥, 因幡和晃, 高橋航圭, 岸本喜久雄. 逆解析を利用した気泡崩壊時のマイクロ・スケール衝撃力測定, 日本機械学会 M&M2015 材料力学カンファレンス, Nov. 2015.
深澤大志, 高橋航圭, 因幡和晃, 岸本喜久雄. 破壊形態を考慮したFe-Al異材接合継手の疲労寿命予測, 日本機械学会 M&M2015 材料学会カンファレンス, Nov. 2015.
小島朋久, 因幡和晃, 高橋航圭, 岸本喜久雄. 固液連成界面における固体材料の表面状態が波動伝播へ及ぼす影響, 日本機械学会 M&M2015材料力学カンファレンス, OS1519-461, Nov. 2015. 公式リンク
山口大介, 増子拓也, 因幡和晃, 高橋航圭, 岸本喜久雄. 水撃波伝播と管壁の連成振動メカニズムの実験的研究, 日本機械学会 M&M2015 材料力学カンファレンス, Nov. 2015.
柳内太志, 高橋航圭, 因幡和晃, 岸本喜久雄, 冨岡史織, 杉崎俊夫. 粘着剤のフィブリル観察に基づくはく離力の評価, 第６４期通常総会・学術講演会ならびに各種併設行事, 日本材料学会学術講演会講演論文集, Vol. 64, May 2015.
並木謙佑, 高橋航圭, 因幡和晃, 岸本喜久雄, 後関頼太, 大塚英幸. 応力分布の可視化によるき裂の修復性能評価, 日本材料学会第64期学術講演会, May 2015.
高橋航圭, 山縣勇一朗, 因幡, 岸本喜久雄, 冨岡史織, 杉崎俊夫. 粘着剤のタック特性における厚さ依存性の評価, 日本材料学会第６４期通常総会・学術講演会ならびに各種併設行事, 日本材料学会学術講演会講演論文集, Vol. 64, May 2015.
高橋航圭, ベンタンアリフブディマン, 因幡和晃, 岸本喜久雄. 光弾性縞観察による繊維‐樹脂界面特性の推定, 第６回日本複合材料合同会議, 日本複合材料合同会議講演論文集, 3D-7, Mar. 2015.
高橋航圭, 古田将一, 因幡和晃, 岸本喜久雄. 毛細管現象の吸着力による平板の変形過程, 日本機械学会材料力学部門若手シンポジウム2015, 2015. 公式リンク
日比正治, 因幡和晃, 高橋航圭, 岸本喜久雄, 早房敬祐. 高分子材料のキャビテーション壊食における引張応力の影響, キャビテーションに関するシンポジウム(第17回), キャビテーションに関するシンポジウム(第17回)講演論文集, Nov. 2014.
深澤大志, 三浦靖史, 高橋航圭, 因幡和晃, 岸本喜久雄, 橋村徹. Fe-Al異材接合継手の強度評価, 日本機械学会 M&M2014 材料学会カンファレンス, July 2014.
高橋航圭, 因幡和晃, 岸本喜久雄. 電子機器の微小化と薄膜化に伴う吸着力・接着力の評価と課題, 日本化学会第94春季年会, Mar. 2014. 公式リンク
古田将一, 高橋航圭, 因幡和晃, 岸本喜久雄. 毛細管力によるピラーアレイ構造体凝集現象の評価, 日本機械学会 M&M2014 材料力学カンファレンス, 2014.
高橋航圭, 杉田精司, 因幡和晃, 岸本喜久雄. 濡れによる液架橋形成が及ぼす平板の変形評価, 日本機械学会 M&M2013材料力学カンファレンス, M&M2013 材料力学カンファレンス CD-ROM論文集, Oct. 2013. 公式リンク
武田健吾, 因幡和晃, 高橋航圭, 岸本喜久雄. 複合矩形管における水撃波動伝播, M&M2013 材料力学カンファレンス, 日本機械学会[No.13-8] M&M2013 材料力学カンファレンス CD-ROM論文集, Oct. 2013.
藤村賢宏, 高橋航圭, 因幡和晃, 岸本喜久雄. CFRP 構造物における電気抵抗変化を用いたひずみ測定, 日本材料学会第62期通常総会・学術講演会および併設行事, May 2013.
三浦敏孝, 因幡和晃, 高橋航圭, 岸本喜久雄. 管内の水中火花放電による気泡の生成・崩壊挙動, 第６２回理論応用力学講演会, 第６２回理論応用力学講演会講演論文集, pp. 1-2, Mar. 2013.
永井穣, 因幡和晃, 高橋航圭, 岸本喜久雄. 水撃波面における繰り返し構造を有する円管のフィルタ効果, 第62回理論応用力学講演会, 第62回理論応用力学講演会講演論文集, Mar. 2013.
滝本陽平, 高橋航圭, 因幡和晃, 岸本喜久雄. ストレスファイバーと細胞膜の弾性率の推定, 日本材料学会第62期通常総会・学術講演会および併設行事, 日本材料学会第62期通常総会・学術講演会および併設行事, 2013.
山縣勇一朗, 高橋航圭, 因幡和晃, 岸本喜久雄, 稲男洋一, 杉崎俊夫. 粘着剤のはく離変形挙動の観察によるタック強度評価, 日本機械学会 M&M2013 材料力学カンファレンス, 日本機械学会[No.13-8]M&M2013 材料力学カンファレンス CD-ROM論文集, 2013.
新井大輔, 高橋航圭, 因幡和晃, 岸本喜久雄, 中本浩章, 早房敬祐. 機械・構造物補修用コーティング材料の耐キャビテーション評価, キャビテーションに関するシンポジウム（第１６回）, キャビテーションに関するシンポジウム（第１６回）講演論文集, pp. 1-5, Nov. 2012.
清水孝吉, 因幡和晃, 高橋航圭, 岸本喜久雄. 逆解析を利用した衝撃荷重計測システムの開発, キャビテーションに関するシンポジウム（第１６回）, キャビテーションに関するシンポジウム（第１６回）講演論文集, pp. 1-6, Nov. 2012.
熊谷理, 高橋航圭, 因幡和晃, 岸本喜久雄, 山田幹典, 谷中雅顕. スティックスリップはく離の発生に及ぼす被着体の剛性の影響, 日本機械学会 M&M2012材料力学カンファレンス, M&M2012, Sept. 2012.
川北純, 合田峻広, 高橋航圭, 因幡和晃, 岸本喜久雄, 橋村徹. 表面凹凸化による円管の圧壊特性向上, 日本機械学会M&M2012材料力学カンファレンス, OS0508 >M&M2012 カンファレンス・2012 年 9 月 22~24 日, Sept. 2012.
杉田精司, 高橋航圭, 因幡和晃, 岸本喜久雄. ピラーアレイの変形に及ぼす液体架橋による表面張力の影響, 日本機械学会 M&M2012材料力学カンファレンス, Sept. 2012.
高橋航圭, 清水雅司, 因幡和晃, 岸本喜久雄, Yoichi Inao, Toshio Sugizaki. プローブタック試験による粘着剤のタック強度とはく離特性の評価, M&M若手シンポジウム2012 Hakodate(日本機械学会材料力学部門）, Aug. 2012. 公式リンク
Nguon Kollika, Kazuaki Inaba, Tatsuro Hori, KIKUO KISHIMOTO. Effect of Single Particle on Water-Tube Interaction Subjected toAxial Impact Loading, 第61回理論応用力学講演会, 第61回理論応用力学講演会講演論文集, Mar. 2012.
堀達朗, 因幡和晃, Nguon Kollika, 岸本喜久雄. 水と円管の連成衝撃応答における単一固体粒子の効果, 平成23年度衝撃波シンポジウム, 平成23年度衝撃波シンポジウム講演論文集, pp. 143-144, Mar. 2011.
joris prou, KIKUO KISHIMOTO, Kazuaki Inaba, Andrei Constantinescu. Evaluation of Thin Film Elastic Modulus from Inverse Analysis of Multiple Indentation Unloading Curves, The 60th National Congress of Theoretical & Applied Mechanics, Proceedings of The 60th National Congress of Theoretical & Applied Mechanics, Mar. 2011. 公式リンク
Nguon Kollika, Kazuaki Inaba, Hiroto Takahashi, KIKUO KISHIMOTO. Wave propagation in coupled solid-liquid two-phase flow and pipe, The 60th National Congress of Theoretical & Applied Mechanics, Proceedings of The 60th National Congress of Theoretical & Applied Mechanics, Mar. 2011.
川北純, 因幡和晃, 岸本喜久雄. 水を充填した管内を伝播する引張波によるキャビテーション気泡の生成と崩壊, 平成22年度衝撃波シンポジウム, 平成22年度衝撃波シンポジウム講演論文集, pp. 367-368, Mar. 2011.
清水孝吉, 因幡和晃, 岸本喜久雄. 柔軟部を有する円管の水撃による固液連成衝撃応答, 平成22年度衝撃波シンポジウム, 平成22年度衝撃波シンポジウム講演論文集, pp. 355-356, Mar. 2011.
Farid TRIAWAN, Kikuo Kishimoto, Tadaharu Adachi, Kazuaki Inaba, Nakamura Toshio, Toru Hashimura. Effect of Cell Local-Deformation of Foam Material on Compression and Bending Stiffness, The 60th National Congress of Theoretical and Applied Mechanics, Proceedings of The 60th National Congress of Theoretical & Applied Mechanics, Mar. 2011. 公式リンク
牛房裕之, 因幡和晃, 岸本喜久雄. 水撃による気泡崩壊を利用した超臨界二酸化炭素の生成, 平成23年度衝撃波シンポジウム, 平成23年度衝撃波シンポジウム講演論文集, pp. 141-142, Mar. 2011.
Wang Yize, Kazuaki Inaba, Li Fengming, KIKUO KISHIMOTO. Wave propagation in 3D piezoelectric/ viscous liquid phononic crystals, JSME the 60th National Congress of Theoretical and Applied Mechanics, Proceeging of JSME the 60th National Congress of Theoretical and Applied Mechanics, Mar. 2011. 公式リンク
Wang Yize, Li Fengming, KIKUO KISHIMOTO. Band gap characteristics of elastic waves in phononic crystals with thermal stress, JSME 23rd Computational Mechanics Division Conference., Proceeding of JSME 23rd Computational Mechanics Division Conference., Sept. 2010. 公式リンク
岸本喜久雄. 日本における技術者教育の認定, 豊橋技術科学大学工学教育国際協力研究センター第7回オープンフォーラム講演論文集, 豊橋技術科学大学工学教育国際協力研究センター, 27-44, Mar. 2009.
早房敬祐, 工藤大, 足立忠晴, 岸本喜久雄. サーモグラフィによる回転曲げ疲労試験片の応力分布測定, 日本機械学会M&M2008材料力学カンファレンス, No. 08-6, OS0125, Sept. 2008.
入江庸介, 長沼仁, 村上義樹, 井上裕嗣, 岸本喜久雄. 散逸エネルギー計測による金属部品の疲労限度評価, 日本機械学会M&M2008材料力学カンファレンス, 日本機械学会M&M2008材料力学カンファレンスCD-ROM, No. 08-6, Sept. 2008.
大宮正毅, 篠崎明, 井上裕嗣, 岸本喜久雄. 粗視化分子動力学を用いた高分子系接着剤のはく離解析, 日本機械学会第20回計算力学講演会, 日本機械学会第20回計算力学講演会講演論文集, 日本機械学会, No. 07-36, pp. 67-68, Nov. 2007.
前博行, 大宮正毅, 岸本喜久雄. マイクロバルーンブレンドPPにおける局所ひずみ速度と密度の引張挙動への影響, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会, pp. 397-398, Oct. 2007.
早房敬祐, 工藤大, 大谷俊博, 森永滋, 大宮正毅, 井上裕嗣, 岸本喜久雄. 紫外線照射を受けたGFRPの機械的特性に関する研究, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンスCD-ROM, 日本機械学会, No. 07-3, pp. 413-414, Oct. 2007.
入江庸介, 岸本喜久雄, 井上裕嗣, 長沼仁, 村上義樹. 散逸エネルギー計測によるステンレス鋼の疲労限度の評価, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンスCD-ROM, 日本機械学会, No. 07-3, pp. 103-104, Oct. 2007.
大宮正毅, 岸本喜久雄. ITO薄膜のき裂形成に及ぼすPET基材の塑性変形の影響, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンス, pp. 155-156, Oct. 2007.
荒井正行, 和田英志, 岸本喜久雄. 溶射条件を考慮した遮熱コーティングの残留応力解析, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会, pp. 177-178, Oct. 2007.
岸本喜久雄. 材料力学の役割, 日本機械学会M&M2007材料力学カンファレンス, 日本機械学会M&M2007材料力学カンファレンス講演論文集, 日本機械学会, pp. 117-118, Oct. 2007.
入江庸介, 井上裕嗣, 岸本喜久雄, 長沼仁, 村上義樹. 散逸エネルギー計測によるステンレス鋼の疲労限度の評価, 日本機械学会2007年度年次大会, 日本機械学会2007年度年次大会講演論文集(1), 日本機械学会, No. 07-1, pp. 291-292, Sept. 2007.
岸本喜久雄. 界面強度に関するいくつかの話題, 日本材料学会第56期学術講演会, 界面強度に関するいくつかの話題, 日本材料学会, pp. 77-78, Mar. 2007.
上月謙太郎, 大宮正毅, 岸本喜久雄, 井上裕嗣. 繰り返しナノインデンテーションによるコーティング薄膜のはく離, 日本機械学会2006年度年次大会, 日本機械学会2006年度年次大会講演論文集（1）, pp. 409-410, Sept. 2006.
荒井正行, 和田英志, 岸本喜久雄, 井上裕嗣. 溶射施工条件が遮熱コーティングの膜構造に及ぼす影響, 日本機械学会2006年度年次大会, 日本機械学会2006年度年次大会講演論文集（1）, pp. 515-516, Sept. 2006.
前　博行, 岸本　喜久雄. 弾粘塑性構成則を用いたエラストマ変性PPの動的破壊　モデリングとシミュレーション, 自動車技術会2006年秋季大会, 自動車技術会　学術講演会前刷集, No. 135-06, pp. 19-24, Sept. 2006.
篠崎明, 岸本喜久雄, 井上裕嗣, 大宮正毅. 分子鎖ネットワークモデルを用いた粘着材の付着強度解析, 日本機械学会M&M2006材料力学カンファレンス, 日本機械学会M&M2006材料力学カンファレンス講演論文集, pp. 663-664, Aug. 2006.
井上裕嗣, 伊藤大介, 岸本喜久雄. 熱弾性応力測定に関する熱伝導の影響の補正, 日本機械学会M&M2006材料力学カンファレンス, 日本機械学会M&M2006材料力学カンファレンス講演論文集, pp. 333-334, Aug. 2006.
前博行, 望月大資, 大宮正毅, 井上裕嗣, 岸本喜久雄. 押出しアルミニウム部材の圧潰解析への直交異方性損傷モデルの適応, 日本機械学会M&M2006材料力学カンファレンス, 日本機械学会M&M2006材料力学カンファレンス講演論文集, pp. 185-186, Aug. 2006.
増田良太, 大宮正毅, 井上裕嗣, 岸本喜久雄. 界面強度に及ぼすはく離速度の影響, 日本機械学会M&M2005材料力学カンファレンス講演論文集, Vol. 05-9, pp. 659-660, Nov. 2005.
井上裕嗣, 伊藤大介, 岸本喜久雄. 熱弾性応力測定に及ぼす熱伝導の影響の補正, 日本機械学会M&M2005材料力学カンファレンス講演論文集, Vol. 05-9, pp. 147-148, Nov. 2005.
Machmud, M. Nizar, Daiseuke Mochizuki, Masaki Omiya, Hirotsugu Inoue, Kikuo Kishimoto. High Rate Deformation and Failure Characteristics of Amorphous Polymers and Their Blends, 日本機械学会M&M2005材料力学カンファレンス講演論文集, Vol. 05-9, pp. 507-508, Nov. 2005.
大宮正毅, 岸本喜久雄. 高分子基材上のセラミックス薄膜におけるき裂形成に及ぼす界面付着強度の影響, 日本材料学会第12回破壊力学シンポジウム講演論文集, pp. 47-51, Oct. 2005.
和田英志, 荒井正行, 岸本喜久雄. 遮熱コーティングの残留応力, 日本機械学会2005年度年次大会講演論文集, Vol. 6, No. 05-1, pp. 247-248, Sept. 2005.
和田英志, 荒井正行, 岸本喜久雄. ひずみゲージ法による遮熱コーティングの残留応力評価, 日本材料学会第54期学術講演会講演論文集, pp. 149-150, May 2005.
高橋健太郎, 大宮正毅, 王鉄軍, 納冨充雄, 岸本喜久雄, 渋谷壽一. ゴム粒子充填樹脂の延性破壊挙動に関する有限要素解析, 日本機械学会材料力学部門講演会講演論文集, Vol. 99, No. 16, pp. 477-478, 1999.

その他の論文・著書など

岸本喜久雄, 新野秀憲. 夢ロードマップ～機械工学の未来への貢献～, 日本機械学会誌, 日本機械学会, Vol. 120, No. 1178, pp. 14-17, Jan. 2017.
高橋航圭, 因幡和晃, 岸本喜久雄. ぬれが及ぼす微細構造体における吸着力・接着力の評価と課題, 日本接着学会誌, Vol. 50, No. 7, pp. 235-242, July 2014.
岸本喜久雄. 大学教育の国際化-工学系の場合-, IDE現代の高等教育, IDE大学協会, No. 540, pp. 28-33, May 2012.
岸本喜久雄. 技術者教育プログラム認定の動向, 日本機械学会誌, 日本機械学会, Vol. 12, No. 1089, pp. 612-613, Aug. 2009.
岸本喜久雄. くるま社会のさらなる進化を求めて, 自動車技術, 自動車技術会, 62, 12, Ⅱ, Dec. 2008.
岸本喜久雄, 大宮正毅, 上月謙太郎. 界面き裂の支配力学パラメータと界面強度評価試験, 日本接着学会誌, 日本接着学会, pp. 31-39, Nov. 2007.
岸本喜久雄. 21世紀をになう機械技術者の育成 -初等教育から継続教育まで-, 日本機械学会誌, 日本機械学会, Vol. 110, No. 1064, p. 1, July 2007.
岸本喜久雄. JABEE審査の状況, 日本機械学会誌, Vol. 109, No. 1053, pp. 616, Aug. 2006.
雨海正純, 岸本喜久雄. 携帯機器の落下衝動によるはんだ接合の信頼性評価試験, MATERIAL STAGE, Vol. 6, No. 8, pp. 27-31, 2006.
天谷賢治, 青木繁, 岸本喜久雄. 腐食防食問題の境界要素解析, 軽金属, Vol. 49, No. 9, pp. 452-457, 1999.
KIKUO KISHIMOTO. Boundary Element Analysis Thermoelastic Contact Problems, Engineering Analysis with Boundary Elements, Vol. 15, No. 4, pp. 329, 1995.
KIKUO KISHIMOTO. Wavelet Analysis of Dispersive Stress Waves, JSME International Journal, Vol. 38, No. 4, pp. 416, 1995.
KIKUO KISHIMOTO. Mechanics of Interface -Elastic Singular Field of Dissimilar Materials, Bulletin of thr Japan Society for Industrial and Applied Mathematics, Vol. 5, No. 4, pp. 28, 1995.

特許など

岸本喜久雄, 因幡和晃, 合田　峻広, 橋村　徹. エネルギー吸収部材. 特許. 公開. 国立大学法人東京工業大学, 株式会社神戸製鋼所. 2011/06/28. 特願2011-143353. 2013/01/17. 特開2013-010392. 2013.
岸本喜久雄, 因幡和晃, 熊谷　理, 谷中　雅顕, 日野　好弘. 引掻き試験機および引掻き試験方法. 特許. 公開. 国立大学法人東京工業大学, 凸版印刷株式会社. 2011/02/16. 特願2011-030853. 2012/09/06. 特開2012-168102. 2012.
岸本喜久雄, 佐伯　尚哉. 剥離性評価方法および剥離性評価装置. 特許. 公開. 国立大学法人東京工業大学, リンテック株式会社. 2009/11/11. 特願2009-257723. 2011/05/26. 特開2011-103373. 2011.
岸本喜久雄, 増田　良太, 早川　基行, 稲男　洋一. 引張試験機. 特許. 公開. 国立大学法人東京工業大学, リンテック株式会社. 2009/01/30. 特願2009-019900. 2010/08/12. 特開2010-175450. 2010.
森茂, 三原美鶴, 岸本喜久雄, 井上裕嗣, 天谷賢治, 大宮正毅. 荷重推定方法. 特許. 公開. 国立大学法人東京工業大学, 日産自動車株式会社. 2008/09/04. 特願2008-227390. 2010/03/18. 特開2010-060462. 2010. Mar.
天谷賢治, 佐藤勲, 岸本喜久雄, 森　大樹, 祐川貴也. 測定対象物測定方法および装置. 特許. 公開. 国立大学法人東京工業大学, 日産自動車株式会社. 2007/11/16. 特願2007-298478. 2009/06/04. 特開2009-122050. 2009.

学位論文

き裂の進展挙動を記述するための破壊力学パラメータに関する研究, 本文, 工学博士, 東京工業大学, 1982/01/31,

[ BibTeX 形式で保存 ] [ 論文・著書をCSV形式で保存 ] [ 特許をCSV形式で保存 ]

Home

各種検索

サポート

T2R2について

関連リンク

岸本喜久雄研究業績一覧 (485件)

論文

著書

国際会議発表 (査読有り)

国内会議発表 (査読有り)

国際会議発表 (査読なし・不明)

国内会議発表 (査読なし・不明)

その他の論文・著書など

特許など

学位論文

Home

各種検索

サポート

T2R2について

関連リンク

岸本喜久雄 研究業績一覧 (485件)

論文

著書

国際会議発表 (査読有り)

国内会議発表 (査読有り)

国際会議発表 (査読なし・不明)

国内会議発表 (査読なし・不明)

その他の論文・著書など

特許など

学位論文

岸本喜久雄研究業績一覧 (485件)