|
Publication List - TAKUSHI SAITO (373 entries)
Journal Paper
-
Kiminori Toya,
Satoshi Sayama,
Takushi Saito.
Measurement of refractive index distribution of axisymmetric injection molded components using background-oriented Schlieren,
Seikei-Kakou,
Vol. 36,
No. 2,
pp. 87-93,
Jan. 2024.
-
Tatsuya Kawaguchi,
Yuki Tano,
Takushi Saito.
Experimental Studies on the Taylor-Couette Flow of Shear-Thinning Fluids,
International Journal of GEOMATE,
Sept. 2022.
-
Kosuke Higashi,
Kazuhisa Fukutani,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Effect of shear-thinning behavior on fluid temperature distribution mixed by single rotor,
Journal of Thermal Science and Technology,
Vol. 17,
No. 3,
p. 22-00122,
June 2022.
-
Kosuke Higashi,
Kazushisa Fukutani,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Effect of shear-thinning behavior on interface renewal in partially filled single rotor mixing,
Journal of Thermal Science and Technology,
Vol. 17,
No. 1,
p. 22-00020,
Apr. 2022.
-
Nobuhiro Muramoto,
Tatsuya Kawaguchi,
Takushi Saito.
Relationship between Liquid-water Penetration Behavior and Internal Structure in Porous Layer of Copper Nanoparticles,
Thermal Science and Engineering,
Vol. 29,
No. 4,
pp. 55-61,
Oct. 2021.
-
Hesham Khalil,
Takushi Saito,
Hamdy Hassan.
Comparative study of heat pipes and liquid-cooling systems with thermoelectric generators for heat recovery from chimneys,
International Journal of Energy Research,
Sept. 2021.
-
Gea Fardias Mu'min,
Tatsuya Kawaguchi,
Takushi Saito.
Droplet breakup of a high-viscosity-ratio system in a nonuniform temperature field under laser irradiation,
Phys. Fluids,
Vol. 33,
073108,
July 2021.
-
Gea Fardias Mu'min,
Tatsuya Kawaguchi,
Takushi Saito.
Study on droplet deformation of an immiscible fluid system by selective radiation heat using infrared laser,
Polymer Engineering and Science,
Vol. 61,
Issue 4,
pp. 1232-1242,
Feb. 2021.
-
Ahmed Abdo,
Takushi Saito,
Shinichi Ookawara,
Ali Radwan,
Mahmoud Ahmed.
Experimental study of the performance of concentrator photovoltaic/thermoelectric generator system integrated with a new 3D printed microchannel heat sink,
International Journal of Energy Research,
Vol. 45,
Issue 5,
pp. 7741-7763,
Jan. 2021.
-
Tatsuya Kawaguchi,
Yoona Jeong,
Takushi Saito,
Isao Satoh.
FLOW INVESTIGATIONS WITHIN A CONCENTRIC CYLINDERS OF GAS SENSOR MODULE FOR I.C. ENGINES,
International Journal of GEOMATE,,
Vol. 17,
No. 62,
pp. 77 - 83,
Nov. 2019.
-
Takushi Saito,
Satoshi Ihara,
Tatsuya Kawaguchi,
Isao Satoh.
Improvement of Thermal Conductivity of Carbon Fiber-Filled Polymer Composites using Flow-Induced Fiber Orientation,
Seikei-Kakou,
Vol. 31,
No. 3,
pp. 126-128,
Feb. 2019.
-
Kosuke Soga,
Takushi Saito,
Kazunori Ishikawa,
Tatsuya Kawaguchi,
Isao Saoth.
Prediction of Instantaneous Dielectric Breakdown Voltage of Filler Dispersed Polymer Composites,
Netsu Bussei,
Vol. 31,
No. 3,
pp. 131-136,
July 2017.
-
Kosuke Soga,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Percolation Effect on Thermal Conductivity of Filler-Dispersed Polymer Composites,
Journal of Thermal Science and Technology,
Vol. 12,
No. 1,
June 2017.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Study of Laser Transmission Welding for Amorphous Polymer using Radiation Absorption Change by Moisture Adsorption,
Seikei-Kakou,
Vol. 27,
No. 4,
pp. 151-156,
Mar. 2015.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation,
Journal of Applied Polymer Science,
Vol. 129,
pp. 3606-3612,
Sept. 2013.
-
Pudpong, T.,
Buahom, P.,
Areerat, S.,
Rungseesantivanon, W.,
Satoh, I.,
TAKUSHI SAITO.
The effects of processing parameters on the residual wall thickness distribution at the sharp angle corner of water assisted injection molded parts,
International Polymer Processing,
Vol. 28,
No. 5,
pp. 528-540,
2013.
-
Takushi Saito,
Jonghyeob,
Tatsuya Kawaguchi,
Isato Satoh.
Formation Technique of Electrically Conductive Pattern on Molded Polymeric Material by Carbon Dioxide Laser Irradiation,
Seikei-Kakou,
Vol. 24,
No. 6,
pp. 341-343,
May 2012.
-
Tatsuya KAWAGUCHI,
Takushi SAITO,
Isao SATOH.
Multidimensional Measurement of Evaporating Droplets by Dynamic Interferometric Laser Imaging for Droplet Sizing,
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B,
Vol. 77,
No. 784,
Dec. 2011.
-
Tatsuya KAWAGUCHI,
Takushi SAITO,
Isao SATOH,
ISAO SATOH.
Investigation of Brownian Motion of Micro- and Nano-bubble,
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B,
Vol. 77,
No. 784,
Dec. 2011.
-
Hiroyuki Iwami,
Masayhoshi Fukuoka,
Takushi Saito,
Hiroyuki Hamada.
"Surface Transfer/Rear Shrinkage" in Injection Molding -The Mechanism and Possibility of Application to Practical Use,
Seikei-Kakou,
Vol. 23,
No. 11,
pp. 667-674,
Oct. 2011.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
A Study on Micro-scale Flow Behavior of Thermoplastic Polymeric Material,
Journal of Photopolymer Science and Technology,
Vol. 24,
No. 1,
pp. 83-88,
June 2011.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Experimental Analysis and Characterization on Thermal Imprint Process via In-situ Observation,
IEEJ Transactions on Sensors and Micromachines,
The Institute of Electrical Engineers of Japan,
Vol. 130,
No. 8,
pp. 356-362,
Aug. 2010.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Adhesion Effects between a Molten Polymer and a Stamper in a Transcription Process for Fine Patterns,
Seikei-Kakou,
Vol. 21,
No. 8,
pp. 499-509,
July 2009.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Filling and Transcription Behavior of Molten Polymer Coating on Microstructure in Melt-Transcription-Molding Process,
Seikei-Kakou,
プラスチック成形加工学会,
Vol. 21,
No. 2,
pp. 94-102,
Feb. 2009.
-
TAKUSHI SAITO,
Shin-nosuke Ide,
Hiroshi Ito,
TOSHIYUKI YASUHARA,
Tatsuya Kawaguchi,
ISAO SATOH.
Study on Weld Characteristics of Thin-wall Injection Molded Polypropylene Plates,
Seikei-Kakou,
Vol. 20,
No. 10,
pp. 776-780,
Sept. 2008.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Development of a Novel Transcrption Molding Process to Fabricate Sophisticated Polymer Products with Precise Microstructure and High Transparency Applicable to Display Devices and Bio-chips,
International Polymer Processing,
Vol. 22,
No. 2,
pp. 155-165,
May 2007.
-
Yihua Gu,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Heat Transfer in Segregated Fluidized Beds Part 1: Relation between Particle and Temperature Segregation and Dominating Heat Transfer Mechanisms,
Journal of Thermal Science and Technology,
Vol. 2,
No. 1,
pp. 43-54,
Apr. 2007.
-
Yihua Gu,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Heat Transfer in Segregated Fluidized Beds Part 2: Particle Motion and Its Effects on the Heat transfer in the Segregated Fluidized Beds,
Journal of Thermal Science and Technology,
Vol. 2,
No. 1,
pp. 55-66,
Apr. 2007.
-
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Surface temperature monitoring of convex molten polymer using interferometric tomography with direct cylindrical reconstruction : Measurement Science and Technology,
Measurement Science and Technology,
Vol. 17,
pp. 2072-2077,
2006.
-
Takushi Saito,
Isao Satoh.
Thermal Strategy for the Separation of a Polymer Mixture,
Polymer Engineering and Science,
Vol. 45,
No. 10,
pp. 1419-1425,
Oct. 2005.
-
Kimitoshi Sato,
Takushi Saito,
Yasuo Kurosaki.
Comprehensive Welding of Thermoplastics by a Diode Laser,
電気学会論文集C編,
Vol. 125,
No. 2,
pp. 200-205,
Feb. 2005.
-
Hiroshi Ito,
Yusuke Yagisawa,
Takushi Saito,
Toshiyuki Yasuhara,
Takeshi Kikutani,
Yoshitoshi Yamagiwa.
Fundamental Study on Structure Development of Thin-wall Injection Molded Products,
Theoretical and Applied Mechanics Japan,
Vol. 54,
pp. 263-268,
2005.
-
岡田祐一,
大岡健一,
斉藤卓志,
佐藤勲,
東川芳晃.
Relationship between Flow-mark Generation and Material Property of Injection Molded PP Plates II,
成形加工'04,
pp. 271-274,
2004.
-
石川智隆,
斉藤卓志,
佐藤勲.
Micro-forming on Material Surface by High Power IR Laser,
成形加工'04,
pp. 85-86,
2004.
-
島一元,
佐藤勲,
斉藤卓志.
Separation Technique for Polymer Mixture using Melting -Feasibility Study on the Separation Technique-,
第41回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 689-690,
2004.
-
斉藤卓志,
佐藤勲,
東川芳晃.
Study on Flow-mark Generation Mechanism of Injection Molded Talc Filled Polypropylene Plates,
Proceedings of Asian Workshop on Plastic Processing,
pp. 115,
2004.
-
Isao Satoh,
Takushi Saito,
Kazumoto Shima.
Performance of the Cold Transport System Utilizing Evaporation-Freezing Phenomena with a Cold Trap,
Int. J. of Refrigeration,
Vol. 27,
No. 3,
pp. 255-263,
2004.
-
Yihua Gu,
Isao Satoh,
Takushi Saito.
Heat Transfer in Fluidized Bed with Particle Mixture,
Proc. 1st Int. Forum on Heat Transfer,
pp. 293-294,
2004.
-
宮部実,
斉藤卓志,
佐藤勲.
Study on Precise Heating Technique by Radiation Absorption Coefficient Cntrol with Photochromic-dye,
成形加工シンポジア'04,
pp. 377-378,
2004.
-
石見浩之,
福岡正義,
濱田泰以,
斉藤卓志.
Effect of Melt Cooling Profiles at the Both Cavity and Core Surfaces on the Development of ULPAC-mold-functions,
成形加工シンポジア'04,
pp. 205-206,
2004.
-
安原鋭幸,
相原広志,
伊藤浩志,
斉藤卓志,
榎本和城,
大竹尚登.
Mechanical Properties of Carbon Nano Fiber Reinforced Composites in Thin-wall Injection Molding,
成形加工シンポジア'04,
pp. 365-366,
2004.
-
伊藤浩志,
斉藤卓志,
安原鋭幸,
鞠谷雄士,
山極佳年,
室井一男.
Evaluation of Material Properties and Processability Using Intelligent Analysis System for Micro Polymer Processing,
成形加工シンポジア'04,
pp. 375-376,
2004.
-
伊藤浩志,
八木沢勇介,
斉藤卓志,
安原鋭幸,
鞠谷雄士,
山極佳年.
Fundamental Study on Structure Development in Thin-wall Injection Molded Products with Micro Features,
成形加工シンポジア'04,
pp. 361-362,
2004.
-
斉藤卓志,
井手慎之助,
伊藤浩志,
安原鋭幸,
佐藤勲,
山極佳年.
Fundamental Study on Weld Structure of Thin-wall Injection Molded Products,
成形加工シンポジア'04,
pp. 363-364,
2004.
-
高田淳史,
佐藤勲,
斉藤卓志.
Fundamental Study on Resistivity Variation of Conductive Polymer Sheet,
成形加工'03,
pp. 241-242,
2003.
-
保永研壱,
斉藤卓志,
佐藤勲,
東川芳晃.
Relationship between Flow-mark Generation and Material Properties on Injection Molded PP Strips,
成形加工'03,
pp. 285-288,
2003.
-
宮部実,
佐藤勲,
斉藤卓志,
東川芳晃.
In-situ Measurement of Velocity Field Disturbance on Melt Flow-front,
成形加工'03,
pp. 289-290,
2003.
-
斉藤卓志.
温度計測と伝熱制御技術-型内流動から成形材料まで-,
プラスチック成形加工学会第73回講演会要旨集,
pp. 1-20,
2003.
-
Takushi Saito,
Isao Satoh.
A Study on Thermal Adhesion of Polymer Materials and Its Application for a Material Selection Process,
Proceedings of the 6th ASME-JSME Thermal Engineering Joint Conference,
pp. TED-AJ03-217.pdf,
2003.
-
島一元,
佐藤勲,
斉藤卓志.
Performance Evaluation of LNG Waste Cold Transport System using Cold-trap and Evaporation-freezing,
第40回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 255-256,
2003.
-
佐藤公俊,
斉藤卓志,
黒崎晏夫.
Laser Welding of Transparent Plastics using Infrared-absorbing Pigment,
第40回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 781-782,
2003.
-
森由紀,
佐藤勲,
斉藤卓志.
Effect of Material Properties on Thermal Adhesion Behavior of Thermoplastic Polymer Materials,
成形加工'03,
pp. 169-170,
2003.
-
杉本竜一,
佐藤公俊,
斉藤卓志,
黒崎晏夫.
Pressure-loss Reudction at Gate of Injection Mold Assisted by Infrared Radiation,
成形加工'02,
pp. 47-48,
2002.
-
Takushi Saito,
Isao Satoh,
Yasuo Kurosaki.
A New Concept of Active Temperature Control for an Injection Molding Process Using Infrared Radiation Heating,
Polymer Engineering and Science,
Vol. 42,
No. 12,
pp. 2418-2429,
2002.
-
溝口真知子,
仙波健,
斉藤卓志,
増渕雄一,
伊藤浩志,
仲井朝美.
Study on Melting Behavior of Pellets PartI: Spatial Distribution of Crystallinity in PP pellets,
成形加工シンポジア'02,
pp. 323-324,
2002.
-
保永研壱,
斉藤卓志,
佐藤勲,
東川芳晃.
Fundamental Study on Generating Mechanism of Flow-marks of Injection Molded PP,
成形加工シンポジア'02,
pp. 49-50,
2002.
-
高木良,
佐藤勲,
斉藤卓志.
Molded Products -Impact of Heat Transfer Condition during the Filling Stage-,
成形加工シンポジア'02,
pp. 97-98,
2002.
-
斉藤卓志,
佐藤勲.
Surface Profile Control for Thin Glass Plate by CO2 Laser,
2002年日本機械学会熱工学講演会講演論文集,
pp. 419-420,
2002.
-
佐藤公俊,
大橋隆弘,
斉藤卓志,
黒崎晏夫.
Development of the Moldability Improvement of Precision Plastic Articles by Improving the Efficiency of Heat Transfer,
2002年日本機械学会熱工学講演会講演論文集,
pp. 417-418,
2002.
-
Kimitoshi Sato,
Takushi Saito,
Isao Satoh,
Yasuo Kurosaki.
Heat Transfer in Laser Transmission Welding of Thermoplastics using Functional Pigment,
CD-ROM Proceedings of 12th International Heat Transfer Conference,
pp. f_0562.pdf,
2002.
-
Takushi Saito,
Isao Satoh.
Gas Bubble Shape Change in Gas Assisted Injection Molding using Heat Transfer Control,
Proceedings of Asian Workshop on Polymer Processing in Singapore 2002,
pp. O-8-1 - O-8-4,
2002.
-
松田義信,
佐藤勲,
斉藤卓志.
Effect of Frost Formation in a Cold Trap on the Performance of LNG Waste Cold Transport System,
第39回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 439-440,
2002.
-
Takushi Saito,
Christopher W. Macosko.
Interfacial Crosslinking and Diffusion via Extensional Rheometry,
Polymer Engineering and Science,
Vol. 42,
No. 1,
pp. 1-9,
2002.
-
Kimitoshi Sato,
Yasuo Kurosaki,
Takushi Saito,
Isao Satoh.
Laser welding of plastics transparent to near-infrared radiation,
SPIE International Conference; Photonics West 2002, Photon Processing in Microelectronics and Photonics,
Vol. 4637,
pp. 528-536,
2002.
-
満岡隆昭,
佐藤勲,
斉藤卓志.
A Study on Sealing Performance of Insert-molded Products from Thermal Engineering Viewpoint,
成形加工'02,
pp. 59-60,
2002.
-
Kimitoshi Sato,
Takushi Saito,
Yasuo Kurosaki.
Efficient Process to Prevent Warpage of Polymeric Products Assisted by Near-infrared Radiation,
Thermal Science & Engineering,
Vol. 10,
No. 3,
pp. 35-41,
2002.
-
Kimitoshi Sato,
Takushi Saito,
Yasuo Kurosaki.
Diode-laser Welding of Transparent Plastics,
CD-ROM Proceedings of Polymer Processing Society 18th Annual Meeting,
pp. 355.pdf,
2002.
-
Takushi Saito,
Isao Satoh.
Rapid Mold Heating Technique using Heat of Compressed Gas,
CD-ROM Proceedings of Polymer Processing Society 18th Annual Meeting,
pp. 175.pdf,
2002.
-
宮田祐一郎,
佐藤公俊,
黒崎晏夫,
斉藤卓志.
Overlapping Welding of Colored Thermoplastics by Diode-Laser,
成形加工シンポジア'01,
pp. 149-150,
2001.
-
Yasuo Kurosaki,
Kimitoshi Sato,
Isao Satoh,
Takushi Saito.
Precision Polymer Molding Assisted by Infrared Laser Irradiation,
Proceedings of the Third International Symposium on Radiation Transfer,
pp. 344-352,
2001.
-
TAKUSHI SAITO.
Laser Application for Experimental Analysis and Structure Control in Polymer Processing,
第50回高分子学会予稿集,
Vol. 50,
No. 1,
pp. 52-54,
2001.
-
佐藤勲,
斉藤卓志,
佐藤哲隆.
A Rapid Mold Heating Method using Adiabatic Compression of Gas in the Mold Cavity,
成形加工'01,
pp. 317-318,
2001.
-
丸岡裕明,
佐藤勲,
斉藤卓志.
Active Control of Blend Morphology using Infrared Radiation Heating,
成形加工'01,
pp. 281-282,
2001.
-
鳥村真,
佐藤勲,
斉藤卓志.
A Study on Flow-mark Generation by using Simultaneous Measurement of Surface Profile and Temperature Distribution of Injection-molded Polymers,
成形加工'01,
pp. 275-276,
2001.
-
森由紀,
佐藤勲,
斉藤卓志.
Governing Factors of the Selection Method for Waste Plastic Materials utilizing an Unsteady Heat Transfer,
成形加工'01,
pp. 65-66,
2001.
-
板本新平,
佐藤勲,
斉藤卓志.
Behavior of Evaporation-Freezing of Water Containing Freezing-Accelerating Agent,
第38回日本伝熱シンポジウム講演論文集 Vol. 3,
pp. 795-796,
2001.
-
杉山徹,
佐藤勲,
斉藤卓志.
Selection Technique of Waste Polymer Materials utilizing Unsteady Heat Conduction and Thermal Adhesion -Temperature Measurement of Adhered Interface-,
第38回日本伝熱シンポジウム講演論文集 Vol. 2,
pp. 507-508,
2001.
-
繁友良太,
佐藤公俊,
又吉智也,
黒崎晏夫,
斉藤卓志.
High Precision Replication Process Assisted by Infrared Radiation (Influence of Direct/Indirect Irradiation on Replication),
第38回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 501-502,
2001.
-
長浜謙太,
佐藤勲,
斉藤卓志.
An Adsorption Heat Pump System Driven by Waste Cold of the LNG Gasification Process,
第38回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 233-234,
2001.
-
佐藤公俊,
黒崎晏夫,
斉藤卓志.
Development of the Two-Stage High Precision Replication Process Assisted by Infrared Radiation,
成形加工,
Vol. 13,
No. 11,
pp. 751-758,
2001.
-
斉藤卓志,
高木良,
佐藤勲.
Influence of Molding Conditions on Molecular Orientation around Weldline of Injection Molded Parts,
成形加工シンポジア'01,
pp. 251-252,
2001.
-
薗部昌功,
斉藤卓志,
佐藤勲.
Transport/Storage System for the Waste Cold of the LNG Gasification Process Utilizing an Evaporation Freezing Phenomenon,
第38回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 231-232,
2001.
-
斉藤卓志,
佐藤勲.
A Study of Mold Surface Heating Technic using Heat of Compressed Gas,
成形加工シンポジア'01,
pp. 151-154,
2001.
-
Takushi Saito,
Isao Satoh.
A New Control Technic for Polymer Blend Morphology using Radiation Heating,
Proceedings of the Third International Symposium on Radiation Transfer,
pp. 353-360,
2001.
-
斉藤卓志,
斎藤純也,
佐藤勲.
Active Control of Gas Bubble Shape in Gas Assisted Injection Molding using Heat Transfer Control,
成形加工,
Vol. 13,
No. 5,
pp. 331-336,
2001.
-
TAKUSHI SAITO.
研究総覧~計測技術~,
成形加工,
Vol. 13,
No. 7,
pp. 469-471,
2001.
-
斉藤卓志,
佐藤勲,
上杉憲治,
半田浩一.
A Study of Weld Line Formation around an Obstructive Pin in Injection Molded Products -Flow Visualization and Temperature Measurement during the Filling Process-,
成形加工,
Vol. 12,
No. 6,
pp. 325-331,
2000.
-
鳥村真,
斉藤卓志,
佐藤勲.
Real Time Measurement of Flow Mark Generation Process on Injection Molding using Laser Interference,
成形加工'00,
pp. 107-108,
2000.
-
上藤陽一,
斉藤卓志,
佐藤勲.
Precise Molecular Orientation Control of Polymer Sheet by using Interfered Radiation Heating,
成形加工'00,
pp. 51-52,
2000.
-
斉藤卓志,
佐藤勲,
岩田正孝.
Fundamental Study on Waste Polymer Material Selection Technique using Thermal Adhesion,
成形加工シンポジア'00,
pp. 321-322,
2000.
-
北川健太郎,
杉本竜一,
黒崎晏夫,
佐藤公俊,
斉藤卓志.
High Precision Polymer Injection Molding Process Assisted by Infrared Radiation to Improve both Fluidity and Replication of Products,
成形加工シンポジア'00,
pp. 145-146,
2000.
-
佐藤勲,
斉藤卓志,
岩田正孝.
Proposal of Waste Plastic Material Selection Method utilizing Unsteady Heat Transfer,
成形加工シンポジア'00,
pp. 111-112,
2000.
-
Takushi Saito,
Isao Satoh,
Yasuo Kurosaki.
Quantitative Visualization on Time-dependent Surface Profile of Polymer Injection Molding using He-Ne Laser Interference,
CD-ROM Proceedings of 9th. International symposium on flow visualization,
pp. 260.pdf,
2000.
-
斉藤卓志.
Technical Note -Measurements-,
成形加工,
Vol. 12,
No. 7,
pp. 420-423,
2000.
-
斉藤卓志,
佐藤勲.
Visualization of Temperature Histroy around a Weld-line in Polymer Injection Molding,
第37回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 509-510,
2000.
-
黒崎晏夫,
佐藤公俊,
繁友良太,
斉藤卓志.
High Precision Transcription Process Assisted by Infrared Radiation (1st Report: Improvement of the Transcribability of Surface by Tandem Process),
第37回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 495-496,
2000.
-
竹村賢二,
斉藤卓志,
佐藤勲.
Estimation of Heat Transfer Phenomena in Food Processing -Heat and Moisture Transport during Baking of Bread-,
第37回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 159-160,
2000.
-
竹下貴雄,
佐藤公俊,
黒崎晏夫,
斉藤卓志.
Thin Injection Molded Products by Infrared Irradiation,
成形加工シンポジア'99,
pp. 177-178,
1999.
-
斉藤卓志,
佐藤勲,
黒崎晏夫.
A Study of the Wave-like Flow Mark Generation Process on an Injection Molded Polymer Strips with Laser Interference,
成形加工,
Vol. 11,
No. 11,
pp. 914-921,
1999.
-
Takushi Saito,
Hideki Takayanagi,
Isao Satoh.
Formation of the Pattern-like Birefringence Distribution on the Injection Molded Strips by CO2 Laser Interference,
Proceeding of the 6th Japan International SAMPE Symposium,
pp. 659-662,
1999.
-
斉藤卓志,
佐藤勲.
Morphology Improvement of a Blend with Infrared Irradiation,
成形加工'99,
pp. 339-340,
1999.
-
後藤健一郎,
斉藤卓志,
佐藤勲.
Laser Measuring of the Generation Process of Record Groove Shaped Flow Marks in Injection Molding,
成形加工'99,
pp. 13-14,
1999.
-
斉藤卓志,
佐藤勲.
Visualization of the Temperature Distribution at the Weld Part of Injection Molded via IR Thermography,
成形加工'99,
pp. 11-12,
1999.
-
斉藤卓志,
佐藤勲.
Morphology Improvement of Blend Polymer Material with Infrared Irradiation,
第36回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 771-772,
1999.
-
高柳秀樹,
斉藤卓志,
佐藤勲.
Micro-scale Property Control on the Injection Molded Polymer Products with CO2 Laser Interference,
第36回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 769-770,
1999.
-
Takushi Saito,
Hideki Takayanagi,
Isao Satoh.
A New Optical Property Control Method for the Injection Molded Polymer Products by CO2 Laser Interference Heating,
CD-ROM Proceedings of Polymer Processing Society 15th Annual Meeting,
pp. 118.PDF,
1999.
-
Takushi Saito,
Isao Satoh,
Kenji Uesugi,
Kouichi Handa.
Visualization of Polymer Melt Flow around an Obstructive Pin during the Injection Molding Process,
CD-ROM Proceedings of the 2nd Pacific Symposium on Flow Visualization and Image Processing,
pp. PF052.PDF,
1999.
-
斉藤卓志.
射出成形における計測技術-可視化・熱測定について-,
プラスチック成形加工学会第43回講演会要旨集,
pp. 9-15,
1999.
-
Takushi Saito,
Isao Satoh,
Yasuo Kurosaki.
An Application of CO2 Laser Interference Heating for Polymer Injection Molding Process,
CD-ROM Proceedings of the 5th ASME/JSME Thermal Engineering Conference,
pp. 6468.pdf,
1999.
-
斉藤卓志,
佐藤勲,
黒崎晏夫.
Flow-ability Improvement for Thin Injection Molded Products by Infrared Irradiation,
成形加工,
Vol. 11,
No. 5,
pp. 425-431,
1999.
-
Takushi Saito,
Isao Satoh.
Morphology Improvement Technique for the Immiscible Polymer Blend with Infrared Radiation Heating,
Proceeding of the 6th Japan International SAMPE Symposium,
pp. 643-646,
1999.
-
斎藤純也,
斉藤卓志,
佐藤勲.
Active Control of Gas Extension Behavior in Gas Assisted Injection Molded with Heat Transfer Technique,
成形加工シンポジア'99,
pp. 179-180,
1999.
-
佐藤 勲,
斉藤卓志,
高柳秀樹.
Experimental Study in Pattern-like Control of the Molecular-oriented Layer on Injection-molded Strips by Utilizing Interference Fringes of IR Laser Light,
成形加工シンポジア'98,
pp. 53-54,
1998.
-
斉藤卓志,
Christopher W. Macosko.
A Study of the Interfacial Reaction of Reactive Multilayer with an Extensional Rheometry,
第10回高分子加工技術討論会講演要旨集,
pp. 27-28,
1998.
-
斉藤卓志,
佐藤 勲.
Interferometer Visualization of Weldline Formation and Stress Distribution within Injection Molding Strips,
成形加工シンポジア'98,
pp. 195-196,
1998.
-
Takushi Saito,
Christopher W. Macosko.
Interfacial Reaction versus Area Generation Rate via Extensional Rheometry,
Proceedings of International Microsymposium on Elongational Flow of Polymeric Systems,
pp. 213-225,
1998.
-
Yasuo Kurosaki,
Isao Satoh,
Takushi Saito.
A Precision Polymer Injection Molding Process Assisted by Infrared Irradiation,
Conference-Preprint in Plastics in Telecommunications VIII,
pp. 342-351,
1998.
-
Takushi Saito,
Christopher W. Macosko.
Interfacial Reaction versus Area Generation Rate via Extensional Rheometry,
Conference Proceedings of ANTEC'98,
Vol. 1,
pp. 967-971,
1998.
-
Takushi Saito,
Christopher W. Macosko.
A Study of Interfacial Effect in Polymer Blends under Shear and Extensional Flow,
Extended Abstracts of the 14th Annual Meeting of the Polymer Processing Society,
pp. 261-262,
1998.
-
佐藤勲,
黒崎晏夫,
斉藤卓志,
稲生一志.
Pattern-like Control of the Molecular-Oriented Layer on an Injection-Molded Polymer Strip by Utilizing Interference Fringes of Laser Light Hit on the Polymer Surface within the Mold Cavity,
成形加工'97,
pp. 187-188,
1997.
-
Yasuo Kurosaki,
Isao Satoh,
Takushi Saito.
Injection-molding Process for High-presision Polymer Products Utilizing CO2 Laser Irradiation,
International Centre for Heat and Mass Transfer, International Symposium on Molecular and Microscale Heat Transfer in Materials Processing and Other Applications,
pp. 351-362,
1997.
-
斉藤卓志,
黒崎晏夫,
佐藤勲.
Precision Injection Molding Process Assisted by Infrared Radiation (2nd Report, Prediction of Temperature Distribution within Polymer and Mold by Numeical Simulation),
日本機械学会論文集(B編),
Vol. 63,
No. 613,
pp. 3114-3122,
1997.
-
斉藤卓志,
黒崎晏夫,
佐藤勲.
Reduction of Residual Molecular Orientation and Improvement of Flow Length of Injection Molded Polymer Products Assisted by Infrared Irradiation,
第45回応用力学連合講演会講演予稿集,
pp. 131-132,
1996.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志,
藤元隆.
Experimental Study of Gas Assist Injection Molding (Visualization of the Gas Behavior and Quality Improvement of the Molded Products),
成形加工シンポジア'96,
pp. 275-276,
1996.
-
斉藤卓志,
黒崎晏夫,
佐藤勲,
柴田良平.
ふく射加熱を用いた薄板あるいは微細形状を有する成形品の成形,
成形加工'96,
pp. 69-72,
1996.
-
Takushi Saito,
Yasuo Kurosaki,
Isao Satoh.
Improvement of Polymer Behavior during the Filling Process of Injection Molding by Thermal Irradiation,
Proceedings of 12th Annual Meeting of the Polymer Processing Society,
pp. 411-412,
1996.
-
黒崎晏夫,
佐藤勲,
斉藤卓志.
Precision Injection Molding Process Assisted by Infrared Radiation (Quality Improvement of Polymer Products by CO2 Laser-Assisted Injection Molding Process),
日本機械学会論文集(C編),
Vol. 62,
No. 599,
pp. 2864-2871,
1996.
-
黒崎晏夫,
佐藤勲,
斉藤卓志.
Location of Sink-marks on the Surface of Injection-molded Polymer Strips Controlled by the Heat Transfer,
成形加工,
Vol. 8,
No. 2,
pp. 136-143,
1996.
-
Yasuo Kurosaki,
Isao Satoh,
Takushi Saito.
An Advanced Injection Molding Process Assisted by Radiative Heating to Reduce Molecular Orientation and to Improve the Transcribability of the Molded Surface,
Proceedings of the Symposium on Thermal Science and Engineering in Honor of Chancellor Chang-Lin Tien,
pp. 247-253,
1995.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
Quality Improvement of Injection-Molded Polymer Products Utilizing CO2 Laser Heating,
第32回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 415-416,
1995.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志,
柴田良平.
Improvement of Flow Length of Injection Molded Polymer Products utilizing a Radiative Heating,
成形加工シンポジア'95,
pp. 241-242,
1995.
-
斉藤卓志,
黒崎晏夫,
佐藤 勲.
金型内樹脂のふく射加熱による高品位射出成形手法の研究,
第4回ポリマー材料フォーラム講演予稿集,
pp. 348-349,
1995.
-
Yasuo KUROSAKI,
Isao SATOH,
Takushi SAITO.
Location of Sink-Marks on the Surface of Injection-Molded Polymer Strips Controlled by the Heat Transfer within the Molded,
Proceedings of ASME/JSME Thermal Engineering Joint Conference,
Vol. 4,
pp. 121-126,
1995.
-
Yasuo KUROSAKI,
Isao SATOH,
Takushi SAITO.
Reduction of Birefringence in a Skin-Layer of Injection Molded Polymer Strips Using CO2 Laser Irradiation,
Proceedings of 30th National Heat Transfer Conference,
Vol. 4,
pp. 201-208,
1995.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
射出成形品のひけ発生位置に対する固化層の発達状況と樹脂-金型壁の接着性の影響,
成形加工'94,
pp. 237-240,
1994.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
A Reduction Method and Visualization of Flow Induced Molecular Orientation using Radiative Heating of CO2 Laser,
成形加工シンポジア'94,
pp. 82-85,
1994.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
Injection Molding of High Grade Polymer Products by Heat Transfer Control (Control of Sink Mark Location),
日本機械学会講演論文集 Vol. 2,
Vol. 930,
No. 9,
pp. 413-415,
1993.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
リブを有する射出成形平板のひけ発生過程の可視化(金型壁温分布とひけ発生プロセスの関連),
成形加工'93,
pp. 213-214,
1993.
-
黒崎晏夫,
佐藤 勲,
斉藤卓志.
非均一に冷却された金型を用いて成形された射出成形品のひけ発生位置に対する保圧力の影響,
成形加工'92,
pp. 71-74,
1992.
Book
-
TAKUSHI SAITO.
射出成形金型の機構と製作法/金型の企画・設計/冷却の計算,
Seikei-Kakou,
プラスチック成形加工学会,
Vol. 31,
No. 3,
pp. 111-114,
Feb. 2019.
-
TAKUSHI SAITO.
材料の溶融を考えるための伝熱基礎,
樹脂の溶融混練・押出機と複合材料の最新動向,
シーエムシー出版,
pp. 27-35,
Dec. 2018.
-
TAKUSHI SAITO.
ポリマー混練時の樹脂の伝熱メカニズム,
押出成形の条件設定とトラブル対策,
(株)技術情報協会,
pp. 35-41,
Dec. 2018.
-
Jun Taniguchi,
Hiroshi Ito,
Jun Mizuno,
Takushi Saito.
Nanoimprint Technology,
John Wiley & Sons Ltd,
July 2013.
-
MASAHIKO YOSHINO,
NAOTO OHTAKE,
Takatoki Yamamoto,
Akinori Yamanaka,
YOSHIO NAKAMURA,
KOUICHI YASUDA,
TAKUSHI SAITO,
genseki,
Shohji Tsushima,
Yu Kurokawa,
HIROTSUGU INOUE,
Takahisa Yamazaki,
TOMOHIRO NOZAKI,
鈴木俊明,
梅原徳次,
近藤行人,
松村隆,
楊明,
月山陽介,
益満秀治,
赤上陽一,
久住孝幸,
上坂裕之,
野老山貴行,
品川一成,
新保實,
平山朋子,
早川邦夫,
坂井田喜久,
鈴木清一,
柏谷智.
機械屋のための分析装置ガイドブック(日本塑性加工学会編),
コロナ社,
pp. 167-177,
Aug. 2012.
International Conference (Reviewed)
-
Yinfeng Xia,
Tatsuya Kawaguchi,
Takushi Saito.
Stirring Method of Multi-Layer Polymer for Interfacial Heat Resistance Measurement,
The 33rd International Symposium on Transport Phenomena(ISTP-33),
Proceedings of the 33rd International Symposium on Transport Phenomena,
No. 69,
Sept. 2023.
-
Ryutaro Miya,
Takushi Saito,
Tatsuya Kawaguchi.
Real-time depth estimation machine learning model for Light Field raw images,
17th Asian Symposium on Visualization,
Proceedings of the 17th Asian Symposium on Visualization,
June 2023.
-
Evan Philander Suryawijaya,
Tatsuya Kawaguchi,
Takushi Saito.
Theoretical Dropwise Condensation Heat Transfer Analysis of Polymer Infused Porous Sintered Copper Nanoparticle,
11th International Conference on Boiling & Condensation Heat Transfer,
Abstracts of ICBCHT11,
p. 19,
May 2023.
-
Takuma Kawashima,
Takushi Saito,
Tatsuya Kawaguchi.
Basic study of thermal conductivity estimation of polymer material by RNEMD,
37th International Conference of the Polymer Processing Society,
Abstracts of PPS-37,
G10-417,
Apr. 2022.
-
Hao Cong,
Seung Joon Lee,
Kosuke Higashi,
Tatsuya Kawaguchi,
Takushi Saito.
Measurement of temperature distribution in mixing viscous fluid using thermochromic liquid crystals,
37th International Conference of the Polymer Processing Society,
Abstracts of PPS-37,
G11-394,
Apr. 2022.
-
Yuki TANO,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Experimental Studies on the Taylor-Couette Flow of Shear-thinning Fluids,
GEOMATE 2021,
Proceedings of GEOMATE 2021,
Nov. 2021.
-
Yusuke Uetsuki,
Tatsuya Kawaguchi,
Takushi Saito.
Evaporation mass flux measurement from solvent surface by Mach-Zehnder interferometer,
The 2nd Asian Conference on Thermal Sciences,
Paper-1152.pdf,
Oct. 2021.
-
Kiminori Toya,
Satoshi Sayama,
Takushi Saito.
Refractive index distribution measurement of injection molded polymer components by background-oriented schlieren method,
The 2nd Asian Conference on Thermal Sciences,
Extended abstract of ACTS2021,
Paper-1123.pdf,
Oct. 2021.
-
Gea Fardias Mu'min,
Tatsuya Kawaguchi,
Takushi Saito.
Droplet deformation and breakup of an immiscible model fluid system by radiation heat using infrared laser,
The 2nd Asian Conference on Thermal Sciences,
Extended abstracts of ACTS2021,
Paper-1167.pdf,
Oct. 2021.
-
Takushi Saito,
Kento Yamada,
Tatsuya Kawaguchi,
Isao Satoh.
Effect of Compatibilizer on Thermal Resistance at Bonded Interface of Heterogeneous Polymers,
The 2nd Pacific Rim Thermal Engineering Conference,
Extended Abstracts of the 2nd Pacific Rim Thermal Engineering Conference,
Dec. 2019.
-
Yang-ming Fan,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Study of Surface Wetting Control of the Solid Body by Chemical States and Surface Geometry of Coated Nano-particles Layer,
The 12th Pacific Symposium on Flow Visualization and Image Processing,
PSFVIP-12 Full Paper,
Nov. 2019.
-
Gea Ferdias Mumin,
Tatsuya Kawaguchi,
Takushi Saito.
Thermal Approach for Viscosity Matching in Simple Droplet for Achieving Dispersion Control by Non-homogeneous Temperature Field,
The 12th Pacific Symposium on Flow Visualization and Image Processing,
PSFVIP-12 Full Papers,
Nov. 2019.
-
Takushi Saito,
Yuki Noguchi,
Kosuke Higashi,
Kazuhisa Fukutani,
Tatsuya Kawaguchi,
Isao Satoh.
Flow Analysis of Viscoelastic Fluid Stirred by Single Rotor,
35th International Conference of the Polymer Processing Society,
Conference Proceedings of PPS35,
May 2019.
-
Tatsuya Kawaguchi,
Yoona Jeong,
Takushi Saito,
Isao Satoh.
Flow Investigations within a concentric cylinders of gas sensor modulefor I.C. engines,
4th Int. Conf. on Science, Engineering & Environment (SEE),
Proc. 4th Int. Conf. on Science, Engineering & Environment (SEE),
Nov. 2018.
-
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Ultrasound Flow Metering for the Distorted Velocity Distribution by Means of the Parallel Shift Method,
11th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering,
pp. 95-98,
Sept. 2018.
-
Takushi Saito,
Satoshi Ihada,
Tatsuya Kawaguchi,
Isao Satoh.
Thermal Conductivity Improvement of Fiber Orientation Control by Sheet Folding Method,
First International Conference on 4D Materials and Systems,
ECS Transactions,
Vol. 88,
No. 1,
pp. 141-147,
Aug. 2018.
Official location
-
Indra Bahadur KC,
Kosuke Higashi,
Yuki Noguchi,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Temperature Distribution Analysis of Viscoelastic Fluid Stirred by Single Triangular Rotor,
First International Conference on 4D Materials and Systems,
ECS Transactions,
Vol. 88,
No. 1,
pp. 149-155,
Aug. 2018.
Official location
-
Tatsuya Kawaguchi,
Yoona Jeong,
Takushi Saito,
Isao Satoh.
Flow visualization in the cylindrical shrouds with apertures of the Oxygen sensor for the exhaust gas,
18th International Symposium on Flow Visualization,
Proc. 18th International Symposium on Flow Visualization,
June 2018.
-
Takushi Saito,
Hideki Hasegawa,
Tatsuya Kawaguchi,
Isao Satoh,
Yutaka Shiraishi,
Kei-ichi Zouta.
Evaluation of heating performance and its impact on surface transcription by rapid heating mold using thin electric heater,
The 34th International Conference of the Polymer Processing Society,
PROCEEDINGS OF PPS-34,
030005,
May 2018.
Official location
-
K. Higashi,
Y. Noguchi,
K. Fukutani,
Tatsuya. Kawaguchi,
Isao Satoh,
Takushi Saito.
RHEOLOGICAL BEHAVIOR OF HIGH VISCOSITY FLUIDS AROUND A ROTATIONG BODY,
11th Pacific Symposium on Flow Visualization and Image Processing,
Proc. 11th Pacific Symposium on Flow Visualization and Image Processing,
Dec. 2017.
-
Takushi Saito,
Takaya Banno,
Tatsuya Kawaguchi,
Isao Satoh.
Estimation of Interfacial Thermal Resistance of Polymer Materials with Layer Structure by Effective Thermal Conductivity Measurement,
The 9th JSME-KSME Thermal and Fluids Engineering Conference,
Extended Abstracts of TFEC9,
TFEC9-1639,
Oct. 2017.
-
Yang Ming Fan,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Study of Surface Wetting Control by Metal Nano-particles and Thermal Treatment,
The 4th International Forum on Heat Transfer,
Proceedings of The 4th International Forum on Heat Transfer,
IFHT2016-1924,
Nov. 2016.
-
Kosuke Soga,
Takushi Saito,
Kazunori Ishikawa,
Tatsuya Kawaguchi,
Isao Satoh.
Numerical Analysis of the Percolation Path Effect on the Thermal Conductivity in Composite Material,
The 4th International Forum on Heat Transfer,
Proceedings of the 4th International Forum on Heat Transfer,
IFHT2016-1964,
Nov. 2016.
-
Kei Kuramoto,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Flow rate measurement after 90 degrees bended pipe using multi-path ultrasound shift method,
10th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering,
Sept. 2016.
-
Kosuke Soga,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Effect of Inclusions on Dielectric Breakdown of Thin Polymer Film,
The First Pacific Rim Thermal Engineering Conference,
Proceedings of PRTEC2016,
PRTEC-14969,
Mar. 2016.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Efficiency Improvement of Temperature Control of Injection Molding Molds for Polymer Processing,
The First Pacific Rim Thermal Engineering Conference,
Proceedings of PRTEC2016,
PRTEC-15085,
Mar. 2016.
-
Doan, D.H.,
TAKUSHI SAITO,
Kawaguchi, T.,
Satoh, I..
Dispersion control of immiscible polymer blend using selective heating by infrared laser irradiation: Numerical study,
AIP Conference Proceedings,
Vol. 1779,
2016.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Fundamental Study on Agglomeration Control of Metallic Nano-particles by Thermal Treatment,
15th International Heat Transfer Conference,
Proceedings of the 15th International Heat Transfer Conference,
IHTC15-9321,
Aug. 2014.
-
S. OGAWA,
T. KAWAGUCHI,
I. SATOH,
T. SAITO.
RECONSTRUCTION OF VOLUMETRIC PARTICULE FIELD FROM A LIGHT FIELD IMAGE,
16th International Symposium on Flow Visualization,
June 2014.
-
T Abe,
T Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Molecular dynamics analysis for the Brownian motion of nano bubble,
III International Conference on Particle-based Methods,
Proc. III International Conference on Particle-based Methods,
Sept. 2013.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
High-speed ILIDS measurement of evaporating droplet,
12th Triennial International Conference on Liquid Atomization and Spray Systems,
Proc. 12th Triennial International Conference on Liquid Atomization and Spray Systems,
Sept. 2012.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Experimental analysis of natural convection with Joule heating by means of particle image velocimetry,
16th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics,
proc. 16th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics,
July 2012.
-
T.Kawaguchi,
M.Kondo,
I.Satoh,
T.Saito.
Microscale visualization of ionic liquid in open channel by scanning electron microscope,
11th Asian Symposium on Visualization,
Proceedings of the 11th Asian Symposium on Visualization,,
May 2011.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Formation of Electro-Conductive Part on Polymeric Material Surface by CO2 Laser Irradiation,
The 8th ASME-JSME Thermal Engineering Joint Conference,
Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference,
AJTEC2011-44455.pdf,
Mar. 2011.
-
Tomohiro Sekiguchi,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Electric Charge of Micro and Nano Bubbles by Interferometric Laser Imaging Technique,
The 8th ASME-JSME Thermal Engineering Joint Conference,
Proceedings of the 8th ASME-JSME Thermal Engineering Joint Conference,
AJTEC2011-44612.pdf,
Mar. 2011.
-
Nakngoenthong, J.,
Naksuk, N.,
Kanarat, A.,
TAKUSHI SAITO.
Supervisory level control of robot plasma spray coating process with task level modification based on process database,
ECTI-CON 2011 - 8th Electrical Engineering/ Electronics, Computer, Telecommunications and Information Technology (ECTI) Association of Thailand - Conference 2011,
pp. 569-572,
2011.
-
Tatsuya KAWAGUCHI,
Isao SATOH,
Takushi SAITO.
Lagrangian diagnostics of evaporating spray system by means of high-speed camera and Nd:YLF laser,
5th International Symposium on Advanced Science and Technology in Experimental Mechanics,
Proc. 5th International Symposium on Advanced Science and Technology in Experimental Mechanics,
Nov. 2010.
-
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF THE COATING PROCESS OF MELT-TRANSCRIPTION MOLDING PROCESS,
Polymer Processing Society 26th Regional Meeting,
Proceedings of the Polymer Processing Society 26th Regional Meeting,
Oct. 2010.
-
Tatsuya Kawaguchi,
I.Satoh,
T.Saito.
Dynamic ILIDS measurement by means of high-speed Nd:YLF laser,
23rd Annual Conference on Liquid Atomization and Spray Systems,
Proceedings of the 23rd Annual Conference on Liquid Atomization and Spray Systems,
Sept. 2010.
-
Tatsuya KAWAGUCHI,
Shinichi Washizu,
Isao SATOH,
Takushi SAITO.
Experimental and numerical investigation of melt-transcription molding process,
4th International Conference on Advanced Computational Engineering and Experimenting,
Proceedings of the 4TH International Conference on Advanced Computational Engineering and Experimenting,
July 2010.
-
Tatsuya Kawaguchi,
Isao. Satoh,
Takushi. Saito,
Hiroshi Ito.
PIV analysis of Melt–Transcription Molding Process,
8th International symposium on particle image velocimetry,
Proceedings of the 8th International symposium on particle image velocimetry,
PIV09-0074,
Aug. 2009.
-
TAKUSHI SAITO,
Motoki Noko,
Tatsuya Kawaguchi,
Isao Satoh.
Small Scale Molding System for Thermoplastic Materials using Strong Ultrasonic Vibration,
3rd JSME/ASME International Conference on Material and Processing,
Proceedings of the 3rd JSME/ASME International Conference on Material and Processing,
MSEC_ICM&P2008-72092,
Oct. 2008.
-
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Novel interferometric laser imaging for spray and microbubble sizing – one of the successful Mie scattering applications,
Mie Theory 1908-2008, present developments and interdisciplinary aspects of light scattering,
Proceedings of the workshop “Mie Theory 1908 - 2008: Present developments and interdisciplinary aspects of light scattering”,
Sept. 2008.
-
TAKUSHI SAITO,
ISAO SATOH,
Tatsuya Kawaguchi.
Micro Molding System for Thermoplastic Materials Using Strong Ultrasonic Wave,
Asian Workshop on Polymer Processing 2008 (AWPP2008),
Proceedings of the Asian Workshop on Polymer Processing 2008 (AWPP2008),
Aug. 2008.
-
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Visualization of microscale bubbles in fluid by interferometric laser imaging technique,
13th International Symposium on Flow Visualization,
Proceedingd of the 13th International Symposium on Flow Visualization,
July 2008.
-
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Local Radiation Heating Technique of Polymeric Materials using Functional-dye,
Proc. 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference,
pp. HT2007-32909.pdf,
July 2007.
Domestic Conference (Reviewed)
-
ストジャリットタム ジャルチャイ,
佐藤 勲,
TAKUSHI SAITO,
川口 達也.
G0610202 デシカント材を利用した急速加熱/冷却システムの研究([G061-02]熱工学部門一般セッション(2)伝熱II),
年次大会 : Mechanical Engineering Congress, Japan,
一般社団法人日本機械学会,
Vol. 2014,
pp. "G0610202-1"-"G0610202-5",
Sept. 2014.
-
Tatsuya KAWAGUCHI*,
Takushi SAITO,
Isao SATOH.
Volumetric reconstruction of particulate dispersions from a light field image by means of a plenoptic camera,
17th International Symposium on Applications of Laser Techniques to Fluid Mechanics,
July 2014.
-
Noriaki Kamioka,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Effect of surfactants and generation condition to the ζ potential and diameter of microbubble,
日本混相流学会年会講演会2010,
日本混相流学会年会講演会2010講演論文集,
July 2010.
-
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Conbined measurement of microbubble characteristics by image processing of light scattering,
可視化情報全国講演会2009,
可視化情報全国講演会2009講演論文集,
F116,
Oct. 2009.
-
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO,
Hiroshi Ito.
PIV measurement of the melt-transcription molding process,
可視化情報全国講演会2009,
可視化情報全国講演会2009講演論文集,
D104,
Oct. 2009.
-
Noriaki Kamioka,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Interferometric Laser Imaging of Microbubbles in Electric Field,
日本機械学会2009年度年次大会,
J0502-1-5,
Sept. 2009.
-
Noriaki Kamioka,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Visualization of Microbubbles in Electric Field,
第37回可視化情報シンポジウム,
第37回可視化情報シンポジウム講演論文集,
P03-001,
July 2009.
International Conference (Not reviewed / Unknown)
-
Takushi Saito,
Yinfeng Xia,
Tatsuya Kawaguchi.
Measurement of interfcial thermal resistance of layered heterogeneous polymers obtained by rotating parallel discs,
Polymer Processing Society 2023, Asia-Australasia Regional Conference,
Conference Abstracts,
Keynote Lecture 15,
Nov. 2023.
-
Takushi Saito,
Takuma Kawashima,
Tatsuya Kawaguchi.
Analysis of heat transfer at polymer interface by molecular dynamics simulation,
Asian Workshop on Polymer Processing 2022,
Abstract book of AWPP2022,
p. 38,
Oct. 2022.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Evaluation of Thermal Resistance at Welded Interface of Heterogeneous Polymer System,
Asian Workshop on Polymer Processing 2017,
Proceedings of AWPP2017,
pp. 31-33,
Oct. 2017.
-
Takushi Saito,
Tatsuya Kawaguchi,
ISAO SATOH.
Application of Heat Transfer Control in Thermoplastic Polymer Processing,
Asian Workshop on Polymer Processing 2016,
Program & Abstract Book of AWPP2016,
KN029,
Nov. 2016.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Selective Laser Irradiation to Immiscible Polymer Blend for Dispersion Control,
Polymer Processing Society Asia/Australia Conference 2016,
Proceedings of PPS-2016,
S-09-334-O,
Oct. 2016.
-
Takushi Saito,
Tomoya Komiyama,
Ishikawa Kazunori,
Tatsuya Kawaguchi,
Isao Satoh.
Experimental Analysis of Micro-scale Structure of Polymer Sheet Containing Boron-nitride,
30th International Conference of the Polymer Processing Society,
Proceedings of PPS30,
05-652.pdf,
June 2014.
-
TAKUSHI SAITO,
Tatsuya Kawaguchi,
Isao Satoh.
Controlled Rapid Heating of Mold Surface by Thin Electrical Heating Element,
Asian Workshop on Polymer Processing 2013,
Proceedings of AWPP2013,
pp. 69,
Dec. 2013.
-
Tomoya Komiyama,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Saoth.
Fabrication of Electrically Conductive Part on Resin Substrate by Carbon Dioxide Laser Irradiation to Silver Nanoink,
Asian Workshop on Polymer Processing 2012,
Proceedings of the AWPP2012,
pp. 40-41,
Aug. 2012.
-
Ziwei Yang,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Evaluation of Mold Temperature Control System in Injection Molding by Using Heat Exchange with Water/Vapor Phase Change,
Asian Workshop on Polymer Processing 2012,
Proceedings of the AWPP2012,
pp. 60-61,
Aug. 2012.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Distribution Measurement of Refractive Index in Injection Molded Transparent Products by Interferometric Computer Tomography,
The 9th Asian Workshop on Polymer Processing,
Proceedings of the 9th Asian Workshop on Polymer Processing,
pp. 366-369,
Dec. 2010.
-
Takushi Saito,
Tatsuo Kurebayashi,
Tatsuya Kawaguchi,
Isao Satoh.
A Study on New Transmission Laser Welding Utilizing Moisture Adsorption of Amorphous Polymeric Material,
The Polymer Processing Society 26th Annual Meeting,
Proceedings of the Polymer Processing Society 26th Annual Meeting,
The Polymer Processing Society,
R02-410.pdf,
Aug. 2010.
-
Takushi Saito,
Tastuya Kawaguchi,
Isao Satoh.
Laser Transmission Welding Technique Utilizing Change of Absorption Coefficient of Material by Moisture Adsorption,
Asian Workshop on Polymer Processing 2009,
Extended Abstracts of Asian Workshop on Polymer Processing 2009,
The Japan Society of Polymer Processing,
B-214.pdf,
Dec. 2009.
-
Takushi Saito,
Motoki Noko,
Tatsuya Kawaguchi,
Isao Satoh.
Fundamental Study of Molding System for Thermoplastic Materials using Ultrasonic Vibration,
The Second International Forum on Heat Transfer (IFHT2008),
Proceedings of the Second International Forum on Heat Transfer (IFHT2008),
203.pdf,
Sept. 2008.
-
Takushi Saito,
Hiroshi Ito,
Tatsuya Kawaguchi,
Isao Satoh.
Study on Transcription Improvement by Visualization of Melt-transcription Molding Process,
Polymer Processing Society 24th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 24th Annual Meeting,
S13-397.pdf,
June 2008.
-
Takushi Saito,
Hiroshi Ito,
Tatsuya Kawaguchi,
Isao Satoh.
Study of Transcription Mechanism of Melt-transcription Molding Process,
The 42nd IUPAC World Polymer Congress,
CD-ROM Proceedings of The 42nd IUPAC World Polymer Congress,
551.pdf,
June 2008.
-
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Flow Visualization by Interferometric Laser Imaging for Bubble Sizing Technique,
6th Pacific Symposium on Flow Visualization and Image Procesing,
Proceedings of the 6th Pacific Symposium on Flow Visualization and Image Procesing,
pp. CDROM (B05-2.pdf),
May 2007.
-
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Visualization of Heat and Mass Transfer in Direct Embossing Process using Ultrasonic Wave Excitation,
Asian Workshop on Polymer Processing 2006,
Proceedings of Asian Workshop on Polymer Processing 2006,
pp. 119-121,
Dec. 2006.
-
Toshiyuki Yasuhara,
Yasuyuki Araki,
Hiroshi Aihara,
Hiroshi Ito,
Takushi Saito,
Naoto Ohtake.
Influence of Fiber Orientation on Mechanical Properties in Thin-wall Injection molding of CNF/PP Composites,
Polymer Processing Society 22th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting,
pp. SP6-12.pdf,
July 2006.
-
Takushi Saito,
Atsushi Tajiri,
Hiroshi Ito,
Toshiyuki Yasuhara,
Tatsuya Kawaguchi,
Isao Satoh.
Fundamental Study on Polymer Materials Temperature Measurement and Its Application to Precise Process Monitoring,
Polymer Processing Society 22th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting,
pp. SP6-P02.pdf,
July 2006.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
A Melt-Transcription Process to Fabricate Thermoplastic Products with Homogeneous Surface Micro Structures Applied to Display Parts and Micro-Fluidic Devices,
Polymer Processing Society 22th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting,
pp. SP6-17.pdf,
July 2006.
-
Kunihiko Kazama,
Hiroshi Ito,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani.
Structure and Properties of Thin-wall Molded Products with Micro Surface Features,
Polymer Processing Society 22th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting,
pp. SP6-10.pdf,
July 2006.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Visualization of Micro-scale Polymer Melt Filling during Hot Embossing Lithography Process,
Polymer Processing Society 22th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 22th Annual Meeting,
pp. SP5-08.pdf,
July 2006.
-
Takayuki Hirano,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Non-intrusive temperature measurement of curved surface using laser interferometer and computer tomography,
13th International Symposium on Applications of Laser Techniques to Fluid Mechanics,
Proceedings of 13th International Symposium on Applications of Laser Techniques to Fluid Mechanics,
pp. 03_3.pdf,
2006.
-
Takushi Saito,
Atsushi Takata,
Isao Satoh,
Tatsuya Kawaguchi.
Visualization of Micro-scale Transcription during Hot Embossing Lithography Process,
Asian Workshop on Polymer Processing 2005,
CD-ROM Proceedings of Asian Workshop on Polymer Processing 2005,
pp. 50.pdf,
Oct. 2005.
-
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Surface Temperature Monitoring for the Cylindrical Melting Polymer Surface by Interferometric Computed Tomography,
4th World Congress on Industrial Process Tomography,
Proceedings of 4th World Congress on Industrial Process Tomography,
pp. 118-123,
Sept. 2005.
-
Toshiyuki Yasuhara,
Hiroshi Aihara,
Hiroshi Ito,
Takushi Saito,
Kazuki Enomoto,
Naoto Ohtake.
Mechanical Properties of Carbon Nano-Fiber Reinforced Composites in Thin-wall Injection Molding,
Polymer Processing Society 21th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting,
pp. P9-33.pdf,
June 2005.
-
Hiroshi Ito,
Takushi Saito,
Toshiyuki Yasuhara,
Takeshi Kikutani,
Yoshitoshi Yamagiwa,
Kazuo Muroi.
Evaluation of Material Properties and Processability Using Intelligent Analysis System for Micro Polymer Processing,
Polymer Processing Society 21th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting,
pp. P2-5.pdf,
June 2005.
-
Takushi Saito,
Isao Satoh.
Novel Laser Welding Technique for Transparent Material using Phorochromic-dye,
Polymer Processing Society 21th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting,
pp. SL15-26.pdf,
June 2005.
-
Hiroshi Ito,
Yusuke Yagisawa,
Takushi Saito,
Toshiyuki Yasuhara,
Takeshi Kikutani,
Yoshitoshi Yamagiwa.
Fundamental Study on Structure Development in Thin-wall Injection Molded Products,
Polymer Processing Society 21th Annual Meeting,
CD-ROM Proceedings of Polymer Processing Society 21th Annual Meeting,
pp. SL2-10.pdf,
June 2005.
-
Hiroshi Ito,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani,
Yoshitoshi Yamagiwa.
Structure Development in Thin-wall Injection Molding Process,
Annual Technical Conference 2005,
Conference Proceedings of ANTEC'05,
pp. 894-898,
May 2005.
-
Hiroshi Ito,
Takushi Saito,
Toshiyuki Yasuhara,
Takeshi Kikutani,
Yoshitoshi Yamagiwa,
Kazuo Muroi.
Evaluation of Material Properties and Processability Using The Intelligent Micro-scale Polymer Processing System,
Annual Technical Conference 2005,
Conference Proceedings of ANTEC'05,
pp. 693-697,
May 2005.
-
Takushi Saito,
Isao Satoh,
Yoshiaki Togawa.
A Study on Flow-mark Generation Mechanism of Filler Filled PP Plates,
CD-ROM Proceedings of Polymer Processing Society 20th Annual Meeting,
pp. P196.pdf,
June 2004.
Domestic Conference (Not reviewed / Unknown)
-
Kiminori Toya,
Naoya Akaishi,
Ryo Takami,
Masahiko Konno,
Hiroaki Nakamura,
Kuniaki Yamamoto,
Hiroki Tashiro,
Shinya Higashi,
Takushi Saito.
Inline refractive index measurement of injection molded component using background-oriented schlieren,
プラスチック成形加工学会第31回秋季大会,
成形加工シンポジア'23予稿集,
F-211,
Nov. 2023.
-
Tatsuya Kawaguchi,
Riyutaro Miya,
TAKUSHI SAITO.
LightField 画像を用いた高速な深度推定機械学習モデルの構築,
第51回可視化情報シンポジウム,
第51回可視化情報シンポジウム講演論文集,
Aug. 2023.
-
Takanori Suzuki,
Kosuke Higashi,
Tatsuya Kawaguchi,
Takushi Saito.
Effect of rheological properties on dispersion behavior of high viscous liquid,
第34回プラスチック成形加工学会年次大会,
第34回プラスチック成形加工学会予稿集,
G-201,
June 2023.
-
Ryutaro Miya,
Tatsuya Kawaguchi,
Takushi Saito.
Real-time Depth Estimation Machine Learning Model for Light Field Images,
第60回日本伝熱シンポジウム,
第60回日本伝熱シンポジウム講演論文集,
Paper-G314,
May 2023.
-
Takuma Kawashima,
Tatsuya Kawaguchi,
Takushi Saito.
Analysis of Thermal Resistance Distribution of Heterogeneous Polymer Interface using Reverse non-equilibrium Molecular Dynamics Simulation,
第60回日本伝熱シンポジウム,
第60回日本伝熱シンポジウム講演論文集,
Paper-D123.pdf,
May 2023.
-
Takuma Kawashima,
Tatsuya Kawaguchi,
Takushi Saito.
Study on heat transfer characteristics at interface of dissimilar polymer materials by RNEMD,
Seikei-Kakou Autumnal Meeting 2022,
Preprints of Seikei-Kakou Autumnal Meeting 2022,
pp. 215-216,
Nov. 2022.
-
Yuya Matsushita,
Kosuke Higashi,
Tatsuya Kawaguchi,
Takushi Saito.
Visualization analysis of effect of fluid rheological properties on mixing progress,
第33回プラスチック成形加工学会年次大会,
第33回プラスチック成形加工学会年次大会予稿集(オンライン),
B-108,
June 2022.
-
Satoru Sayama,
Kiminori Toya,
Takushi Saito.
Refractive index distribution measurement of injection molded polymer components by background-oriented Schlieren method,
第33回プラスチック成形加工学会年次大会,
第33回プラスチック成形加工学会年次大会講演論文集(オンライン),
G-106,
June 2022.
-
Kosuke Matsumoto,
Tatsuya Kawaguchi,
Takushi Saito.
Boiling heat transfer performance change by structure control of copper nanoparticle layer formed on the heat transfer surface,
第59回日本伝熱シンポジウム,
第59回日本伝熱シンポジウム講演論文集(電子版),
B223,
May 2022.
-
Yuki Tano,
Tatsuya Kawaguchi,
TAKUSHI SAITO.
回転二重円筒内における非ニュートン流体の流動場の可視化,
第49回可視化情報シンポジウム,
Sept. 2021.
-
Kiminori Toya,
Satoshi Sayama,
Takushi Saito.
Measurement of the Refractive Index Distribution of a Plastic Injection Molded Component using the Background-Oriented Schlieren,
日本機械学会2021年度年次大会,
2021年度年次大会予稿集,
S131-03,
Sept. 2021.
-
SeungJoon Lee,
Kosuke HIGASHI,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Study on heat diffusion in partially filled mixing using thermochromic liquid crystal capsules,
プラスチック成形加工学会第32回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2021,
pp. 201-202,
June 2021.
-
Yuki MORISAKI,
Minoru TANAKA,
Satoshi TAKEUCHI,
Atushi SHINMA,
Koichi TANAKA,
Sayaka OKABE,
Takuya SHINODA,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Cooling rate estimation in thickness direction of injection molded PPS plate by enthalpy measurement of crystalline fusion,
プラスチック成形加工学会第32回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2021,
pp. 175-176,
June 2021.
-
Reo TAKAHASHI,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Analysis of plasticization behavior of amorphous polymer material heated by ultrasonic vibration using high-speed camera,
プラスチック成形加工学会第32回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2021,
pp. 135-136,
June 2021.
-
Takehiro TAGUCHI,
Rikuto HIGUCHI,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Study on thermal resistance at the interface of different polymer materials,
プラスチック成形加工学会第32回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2021,
pp. 133-134,
June 2021.
-
Nobuhiro MURAMOTO,
Tatsuya KAWAGUCHI,
Takushi SAITO.
Relationship between liquid-water penetration behavior and internal structure in porous layer of copper nanoparticles,
第58回日本伝熱シンポジウム,
第58回日本伝熱シンポジウム講演論文集,
Paper-D321.pdf,
May 2021.
-
Takushi Saito,
Daiki Funahashi,
Tatsuya Kawaguchi,
Isao Satoh.
Experimental Study on Plasticization Process of Polymer Materials by Ultrasonic Vibration,
プラスチック成形加工学会第28回秋季大会,
Preprints of Seikei-Kakou Autumnal Meeting 2020,
pp. 87-88,
Dec. 2020.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Flow analysis of low aspect ratio Taylor-Couette flow by means of particle image velocimetry.,
日本機械学会 第98期 流体工学部門 講演会,
Nov. 2020.
-
Kosuke Matsumoto,
Kosuke Higashi,
Kazuhisa Fukutani,
Isao Satoh,
Takushi Saito,
TAKUSHI SAITO.
Effect of Shear-thinning of Fluid Viscosity on Single Rotor Mixing Progress,
プラスチック成形加工学会第31回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2020,
pp. 75-76,
June 2020.
-
Ryota Maruyama,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Estimation of Thermal Resistance of Different Polymer Interface by Molecular Dynamics Simulation,
プラスチック成形加工学会第31回年次大会,
Preprints of Seikei-Kakou Annual Meeting,
pp. 291-292,
June 2020.
-
Jeong Yoona,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
多重円筒構造を有する酸素センサ内部流れの流動解析,
熱工学コンファレンス2019,
熱工学コンファレンス2019講演論文集,
Oct. 2019.
-
Kento Yamada,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Influence of compatibilizer on interfacial thermal resistance of layered polymer material,
成形加工'19,
Preprints of Seikei-Kakou Annual Meeting 2019,
pp. 111-112,
June 2019.
-
Rikuto Higuchi,
Kosuke Higashi,
Kazuhisa Fukutani,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Analysis of Kneading Behavior of Viscoelastic Fluids Stirred at Un-filled Condition,
成形加工'19,
Preprints of Seikei-Kakou Annual Meeting 2019,
pp. 157-158,
June 2019.
-
Tatsuya Kawaguchi,
Yuki Noguchi,
Takushi Saito,
Isao Satoh.
低アスペクト比におけるTaylor-Couette流れの流動構造解析,
第56回日本伝熱シンポジウム,
第56回日本伝熱シンポジウム予稿集,
May 2019.
-
Takushi Saito,
Satothi Ihara,
Tatsuya Kawaguchi,
Isao Satoh.
Improvement of Thermal Conductivity of Composite Material by Forced Orientation of Carbon Fiber,
成形加工シンポジア'18(浜松),
Preprints of Seikei-Kakou Autumnal Meering 2018,
pp. 61-62,
Nov. 2018.
-
Takushi Saito,
Hideki Hasegawa,
Yutaka Shiraishi,
Keiichi Zouta.
Study on Rapid Heating Injection Molds using Thin Electric Heater,
型技術ワークショップ2018 in ふくい,
型技術ワークショップ2018 in ふくい 講演論文集,
pp. 60-61,
Nov. 2018.
-
Takushi Saito,
Yuki Noguchi,
KC Indra Bahadur,
Kosuke Higashi,
Kazuhisa Fukutani,
Tatsuya Kawaguchi,
Isao Satoh.
Experimental Analysis of Viscoelastic Fluid Stirred by Single Rotor,
熱工学コンファレンス2018,
日本機械学会熱工学コンファレンス2018講演論文集,
No. 18-29,
J224.pdf,
Oct. 2018.
-
鄭 有娜,
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
開口部を有する二重円筒プロテクタ内部流れの可視化,
第46回可視化情報シンポジウム,
第46回可視化情報シンポジウム講演論文集,
Sept. 2018.
-
Hidenori Hasegawa,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh,
Yutaka Shiraishi,
Kei-ichi Zouta.
Thermal Behavior and Transcription Analysis of Rapid Heating Mold by Thin Electric Heater,
プラスチック成形加工学会 第29回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2018,
pp. 113-114,
June 2018.
-
Isao Satoh,
Takushi Saito.
Polymer Processing and Mold Temperature Control from the Viewpoint of Energy Engineering,
プラスチック成形加工学会 第30回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2018,
pp. 101-102,
June 2018.
-
Takushi Saito,
Kosuke Soga,
Kazunori Ishikawa,
Tatsuya Kawaguchi,
Isao Satoh.
Simulation of Dielectric Breakdown Voltage of Filler Dispersed Polymer Composites,
プラスチック成形加工学会 第25回秋季大会,
Preprints of Seikei-Kakou Autumnal Meeting 2017,
pp. 109-110,
Oct. 2017.
-
Yuki Noguchi,
Kosuke Higashi,
Kazuhisa Fukutani,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Saoth.
Analysis of Kneading Behavior of Viscoelastic Fluids by Particle Image Velocimetry,
第28回プラスチック成形加工学会年次大会,
成形加工'17,
pp. 99-100,
June 2017.
-
Takushi Saito,
Takaya Banno,
Tatsuya Kawaguchi,
Isao Satoh.
Evaluation of Thermal Resistance at Welded Interface of Polymers,
プラスチック成形加工学会 第28回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2017,
pp. 125-126,
June 2017.
-
Kosuke Soga,
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Material Design for High Dielectric Strength and Thermal Conductivity of Ceramics Filler Contained Polymer Composites,
第54回日本伝熱シンポジウム,
第54回日本伝熱シンポジウム講演論文集CD-ROM,
May 2017.
-
Takushi Saito,
Keiya Maekawa,
Tatsuya Kawaguchi,
Isao Satoh.
Analysis of Drying Behavior of Themoplastic Polymer Pellets,
日本機械学会熱工学コンファレンス2016,
日本機械学会熱工学コンファレンス2016講演論文集,
E115.pdf,
Oct. 2016.
-
Keiya Maekawa,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Drying Behavior Simulation of Polymer Pellets by Considering Temperature Dependence of Moisture Diffusion Coefficient,
Seikei-Kakou Autumnal Meeting 2016,
Preprints of Seikei-Kakou Autumnal Meeting 2016,
pp. 112-113,
Oct. 2016.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Progression of Thermoplastic Polymer Processing by Radiation Heating,
第65回高分子討論会,
Polymer preprints, Japan,
Vol. 65,
No. 2,
3J02.pdf,
Sept. 2016.
-
Atsushi Tajima,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Velocity field analysis of downward flow occurs in a square cavity with internal heating,
日本流体力学会年会 2016,
日本流体力学会年会 2016講演論文集,
Sept. 2016.
-
Tatsuya KAWAGUCHI,
Kei KURAMOTO,
Takushi SAITO,
Isao SATOH.
Development of the gas flow meter for the asymmetric pipe flow by the ultrasound shift method,
第44回可視化情報シンポジウム,
可視化情報,
Vol. 36,
No. 1,
July 2016.
-
Tatsuya KAWAGUCHI,
Takushi SAITO,
Isao SATOH.
Flow visualization in low aspect ratio concentric cylinders by means of laser induced fluorescence,
第44回可視化情報シンポジウム,
可視化情報,
Vol. 36,
No. 1,
July 2016.
-
Hideyasu Nishida,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh,
Yutaka Shiraishi,
Reiki Akita,
Kei-ichi Zouta.
Effect of Mold Temperature Control on Surface Transcription by Thin Electric Heater,
The 27th Annual Meeting of the Japan Society of Polymer Processing,
Preprints of Seikei-Kakou Annual Meeting 2016,
pp. 135-136,
June 2016.
-
Yojiro Moritaka,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Dispersion Control of Immiscible Polymer Blend in Extrusion Process by Selective Radiation Heating,
The 27th Annual Meeting of the Japan Society of Polymer Processing,
Preprints of Seikei-Kakou Anuual Meeting 2016,
pp. 101-102,
June 2016.
-
Kosuke Soga,
Takushi Saito,
Kzunori Ishikawa,
Isao Satoh,
Tatsuya Kawaguchi.
Numerical Analysis of Conductive Heat Transfer and Dielectric Properties on Ceramics Filler/Polymer Composites,
53rd National Heat Transfer Symposium of Jpana,
第53回日本伝熱シンポジウム講演論文集CD-ROM,
Paper-1729.pdf,
May 2016.
-
Tatsuya Kawaguchi,
Atsushi Tajima,
Isao Satoh,
Takushi Saito.
Flow Investigations of Natural Convection with Internal Heating in Rectangular Cavity,
53rd National Heat Transfer Symposium of Japan,
第53回日本伝熱シンポジウム講演論文集CD-ROM,
Paper-1636.pdf,
May 2016.
-
Show Ogawa,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Accuracy of the three dimensional flow field measurement by the novel light field PIV technique,
日本機械学会 熱工学コンファレンス2014,
Nov. 2015.
-
Kei Kuramoto,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Development of flow meter by means of multi-angle ultrasonic shift method without inlet region,
第92期 日本機械学会流体工学部門 講演会,
Oct. 2015.
-
Takushi Saito,
Hong Duc Doan,
Tatsuya Kawaguchi,
Isao Satoh.
Dispersion Control of Polymer Blend by Infrared Radiative Heating,
日本機械学会熱工学コンファレンス2015,
日本機械学会熱工学コンファレンス2015講演論文集,
E214.pdf,
Oct. 2015.
-
Kei Kuramoto,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
多線超音波シフト法を用いた曲がり管直後における流量 計測精度の検証,
第 20 回動力・エネルギー技術シンポジウム,
June 2015.
-
Tatsuya Kawaguchi,
Syo Ogawa,
Isato Satoh,
Takushi Saito.
Effects of Optical Parameters on Spatial Resolution in Light Field PIV,
52nd National Heat Transfer Symposium of Japan,
第52回日本伝熱シンポジウム講演論文集,
G211, Paper-1266,
June 2015.
-
Kosuke Soga,
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Thermo-electric Model for Dielectric Breakdown by Phase-field Simulation,
52nd National Heat Transfer Symposium of Japan,
第52回日本伝熱シンポジウム講演論文集,
I323, Paper-1332,
June 2015.
-
Kei Kuramoto,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Comparison of Measurement Method of Accoustic Intensity Shift in Ultrasonic Shift Flowmeter,
52nd National Heat Transfer Symposium of Japan,
第52回日本伝熱シンポジウム講演論文集,
SP207, Paper-1291,
June 2015.
-
Hideyasu Nishida,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh,
Yutaka Shiraishi,
Reiki Akita,
Kei-ichi Zouta,
Ken Shimomai.
Study of Temperature Distribution Control of Mold Surface by Thin Electric Heater,
第26回プラスチック成形加工学会年次大会,
Preprints of Seikei-Kakou Anuual Meeting 2015,
pp. 155-156,
June 2015.
-
Yusei Yokoyama,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Effect of Substrate Pre-treatment on Spreading of Metal Nano-ink,
第22回プラスチック成形加工学会秋季大会,
Preprints of Seikei-Kakou Autumnal Meeting 2014,
pp. 281-282,
Nov. 2014.
-
Hideyasu Nishida,
TAKUSHI SAITO,
Tatsuya Kawaguchi,
ISAO SATOH,
Yutaka Shiraichi,
Reiki Akita,
Keiichi Zouda.
Effect of Structure Unevenness of Thin Electric Heater o Temperature Distribution for Injection Molds,
プラスチック成形加工学会第25回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2014,
pp. 253-254,
June 2014.
-
Yusei Yokoyama,
ISAO SATOH,
TAKUSHI SAITO,
Tatsuya Kawaguchi.
Modeling of Thermal Decomposition of Unti-agglomeration Layer on Silver Nano-particles Surface,
プラスチック成形加工学会第25回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2014,
pp. 189-190,
June 2014.
-
Tomoya Komiyama,
Kazunori Ishikawa,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Effect of Boron Nitride Dispersion on Thermal Conductivity of Polymer Composites,
プラスチック成形加工学会第25回年次大会,
Preprints of Seikei-Kakou Annual Meeting 2014,
pp. 111-112,
June 2014.
-
Tatsuya Kawaguchi,
Takahisa Abe,
ISAO SATOH,
TAKUSHI SAITO.
The Effect of Surfactant for Brownian Motion of Nano Bubble,
51st National Heat Transfer Symposium of Japan,
第51回日本伝熱シンポジウム講演論文集,
E323.pdf,
May 2014.
-
Show Ogawa,
Tatsuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Reconstruction of Volumetric Particle Field using Light Field Camera,
51st National Heat Transfer Symposium of Japan,
第51回日本伝熱シンポジウム講演論文集,
FSP402.pdf,
May 2014.
-
NOBUYUKI IWATSUKI,
YOSHIO SAITO,
TAKUSHI SAITO.
機械設計教育と連動した創造性育成科目(東京工業大学工学部機械知能システム学科「機械知能システム創造」について),
Designシンポジウム2014,
Designシンポジウム2014USB講演論文集,
日本設計工学会,
pp. 1-4,
2014.
-
TAKUSHI SAITO,
Tatsuya Kawaguchi,
ISAO SATOH.
Temperature Measurement of Polypropylene Film in Consideration of Temperature Dependence of Infrared Thermal Properties,
成形加工シンポジア'13,
Preprints of Seikei-Kakou Autumnal Meeting 2013,
pp. 315-316,
Nov. 2013.
-
Takashi Abe,
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
分子動力学によるナノバブルのブラウン運動解析,
混相流シンポジウム2013,
混相流シンポジウム2013講演論文集,
Aug. 2013.
-
ZIWEI YANG,
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Flow rate measurement by multi-path ultrasound shift method,
第41回可視化情報シンポジウム,
可視化情報シンポジウム講演論文集,
July 2013.
-
Satoru Kobayashi,
Takushi Saito,
Isao Saoth,
Tatsuya Kawaguchi.
Effect of Thermal Treatment Condition on Electrical Resistivity of Nano-silver Particles,
Seikei-Kakou Autumnal Meeting 2013,
Preprints of Seikei-Kakou Autumnal Meeting 2013,
pp. 183-184,
May 2013.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
PIV measurement by means of light field camera,
National heat transfer conference,
第50回日本伝熱シンポジウム講演論文集,
May 2013.
-
Tomoya Komiyama,
石川和紀,
ISAO SATOH,
TAKUSHI SAITO,
Tatsuya Kawaguchi.
窒化ホウ素を分散させた樹脂材料の温度伝播評価,
National heat transfer conference,
第50回日本伝熱シンポジウム講演論文集,
May 2013.
-
Nobuya Ozaki,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Saoth.
Study on Mold Surface Temperature Control by Thin Heating Element,
Seikei-Kakou Autumnal Meeting 2013,
Preprints of Seikei-Kakou Autumnal Meeting 2013,
pp. 9-10,
May 2013.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Measurement accuracy of dynamic interferometric laser imaging for droplet sizing,
第21回 微粒化シンポジウム,
第21回微粒化シンポジウム講演論文集,
Dec. 2012.
-
Takushi Saito,
Satoru Kobayashi,
Tatsuya Kawaguchi,
Isao Satoh.
Effect of Process Conditions on Electrical Conductivity of Nano-silver-ink,
Seikei-Kakou Autumnal Meeting 2012,
Preprints of Seikei-Kakou Autumnal Meeting 20,
pp. 297-298,
Nov. 2012.
-
Takahiro Tanimura,
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Analysis of Surface Property of Poly(lactic acid) Film in Various Environment,
Seikei-Kakou Annual Meeting 2012,
成形加工'12講演論文集,
pp. 231-232,
June 2012.
-
Tomoya Komiyama,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Saoth.
Fabrication of Electrically Conductive Part on Resin Substrate by Infrared Laser Irradiation to Silver Nanoink,
Seikei-Kakou Annual Meeting 2012,
成形加工'12講演論文集,
pp. 187-188,
June 2012.
-
Ziwei Yang,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Study of Mold Heating/Cooling using Heat Exchange with Water/Vapor Phase Change,
Seikei-Kakou Annual Meeting 2012,
成形加工'12講演論文集,
pp. 111-112,
June 2012.
-
Takashi Abe,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Development of new gas flowmeter by ultra sound tuft method,
49th National Heat Transfer Symposium of Japan,
第49回日本伝熱シンポジウム講演論文集,
Vol. I+II,
pp. 123-124,
May 2012.
-
Tomohiro Sekiguchi,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
The Effect of Interface Structure on Brownian Motion of Nanobubble,
49th National Heat Transfer Symposium of Japan,
第49回日本伝熱シンポジウム講演論文集,
Vol. I+II,
pp. 45-46,
May 2012.
-
Kousuke Soga,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Design of Mechanical Charge System of Al-air Battery,
49th National Heat Transfer Symposium of Japan,
第49回日本伝熱シンポジウム講演論文集,
Vol. III,
pp. 549-550,
May 2012.
-
Takushi Saito,
Zi Yang,
Tatsuya Kawaguchi,
Isao Satoh.
Efficient Temperature Control of Injection Molds by Heat Pipe,
型技術ワークショップ2011,
型技術ワークショップ2011講演論文集,
pp. 118-119,
Nov. 2011.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
SEM Observation of Micro-scale Flow using Ionic Liquid,
成形加工シンポジア'11,
成形加工シンポジア'11講演予稿集,
pp. 295-296,
Oct. 2011.
-
Keita Nakajoh,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
A Study on Rapid Heat Cycle System for Mold Blocks by Heat Pipe,
日本機械学会2011年度年次大会,
日本機械学会2011年度年次大会講演予稿集,
G060024.pdf,
Sept. 2011.
-
Tomohiro Sekiguchi,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Investigation of Brownian Motion and Electric Charge of Nanobubble,
日本機械学会2011年度年次大会,
日本機械学会2011年度年次大会講演予稿集,
J054072.jpg,
Sept. 2011.
-
Shinichi Washizu,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
A Study of Coating Process of non-Newtonian Fluid by Particle Method,
成形加工'11,
成形加工'11講演論文集,
pp. 79-80,
June 2011.
-
Shinichi Washizu,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Numerical Simulation of Non-Newtonian Fluid with Free Surface by Particle Method,
第48回日本伝熱シンポジウム,
第48回日本伝熱シンポジウム講演論文集,
Vol. II+III,
pp. 429-430,
June 2011.
-
Masataka Kondo,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Flow Measurement in Micro-channel using SEM-PIV,
第48回日本伝熱シンポジウム,
第48回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 271-272,
June 2011.
-
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
狭隘なせん断場に流入する非ニュートン流体の PIV 計測,
可視化情報学会2010年全国講演会,
可視化情報学会2010年全国講演会講演論文集,
Sept. 2010.
-
Kenji Kodama,
Takushi Saito,
Tatsuya Kawaguchi,
ISAO SATOH.
Precise Investigation on Transcription Progress of Micro-scale Thermal Imprint via In-situ Observation,
Seikei-Kakou Annual Meeting 2010,
Preprints of Seikei-Kakou Annual Meeting 2010,
The Japan Society of Polymer Processing,
pp. 167-168,
June 2010.
-
Shinichi Washizu,
Tatsuya Kawaguchi,
Takushi Saito,
ISAO SATOH.
Parametric Evaluation of Flow Analysis in Coating Process using Particle Method,
Seikei-Kakou Annual Meeting 2010,
Preprints of Seikei-Kakou Annual Meeting 2010,
The Japan Society of Polymer Processing,
pp. 169-170,
June 2010.
-
Koichi Miyagawa,
Takushi Saito,
Tatsuya Kawaguchi,
ISAO SATOH.
Local Carbonization and Electro-conductive Part Formation on Polymeric Material Surface by CO2 Laser Irradiation,
Seikei-Kakou Annual Meeting 2010,
Preprints of Seikei-Kakou Annual Meeting 2010,
The Japan Society of Polymer Processing,
pp. 99-100,
June 2010.
-
Tatsuo Kurebayasi,
Takushi Saito,
Tatsuya Kawaguchi,
ISAO SATOH.
Evaluation of Welded Strength by Transmission Laser Welding with Absorption Coefficient Control,
Seikei-Kakou Annual Meeting 2010,
Preprints of Seikei-Kakou Annual Meeting 2010,
The Japan Society of Polymer Processing,
pp. 63-64,
June 2010.
-
Tomohiro Sekiguchi,
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Measurement of Birefringence Distribution in Transparent Polymeric Material by Combination of Rotating Analyzer and Computer Tomography,
Seikei-Kakou Annual Meeting 2010,
Preprints of Seikei-Kakou Annual Meeting 2010,
The Japan Society of Polymer Processing,
pp. 23-24,
June 2010.
-
Noriaki Kamioka,
Tastuya Kawaguchi,
ISAO SATOH,
TAKUSHI SAITO.
Electric Charge of Micro-Nano Bubbles Generated by Pressurized Dissolution Pump,
47th National Heat Transfer Symposium of Japan,
Proceedings of the 47th National Heat Transfer Symposium of Japan,
The Heat Transfer Society of Japan,
Vol. 2+3,
pp. 461-462,
May 2010.
-
TAKUSHI SAITO,
Kouichi Miyagawa,
Tatsuya Kawaguchi,
ISAO SATOH.
Technique of Giving Electro-conductivity to Polymeric Material by Laser Irradiation,
47th National Heat Transfer Symposium of Japan,
Proceedings of the 47th National Heat Transfer Symposium of Japan,
The Heat Transfer Society of Japan,
Vol. 2+3,
pp. 489-490,
May 2010.
-
Shinichi Washizu,
Tatsuya Kawaguchi,
TAKUSHI SAITO,
ISAO SATOH.
Numerical simulation of molten polymer behavior in coating process by particle method,
第24回数値流体力学シンポジウム,
第24回数値流体力学シンポジウム講演論文集,
May 2010.
-
Takushi Saito,
Isao Satoh,
Tastuya Kawaguchi.
Effect of Molding Conditions on Refractive Index Distribution of Compression Molded Transparent Products,
成形加工シンポジア'09,
Preprints of Seikei-Kakou Autumnal Meeting 2009,
プラスチック成形加工学会,
pp. 163-164,
Oct. 2009.
-
Takushi Saito,
Shige Iwamoto,
Tatsuya Kawaguchi,
Isao Satoh.
Laser Transmission Welding Technique Utilizing Change of Absorption Coefficient of Material by Moisture Adsorption,
成形加工'09,
成形加工'09講演論文集,
プラスチック成形加工学会,
pp. 231-232,
June 2009.
-
Hiromichi Kitamura,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi,
Takao Kashiwagi.
Adsorption and Desorption Characteristics of Desiccant Material for Hybrid Desiccant Air-conditioning System,
第46回日本伝熱シンポジウム,
第46回日本伝熱シンポジウム講演論文集,
日本伝熱学会,
Vol. 1,
pp. 133-134,
June 2009.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Adhesion Effects between A Molten Polymer and A Stamp in A Transcription Process for Fine Patterns,
成形加工'09,
成形加工'09講演論文集,
プラスチック成形加工学会,
pp. 357-358,
June 2009.
-
Kenji Kodama,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Development of Efficient Visualization System for Micro-scale Transcription,
成形加工'09,
成形加工'09講演論文集,
プラスチック成形加工学会,
pp. 403-404,
June 2009.
-
Takushi Saito,
Norio Manabe,
Hiroaki Minami,
Masato Ohtsuka,
Tatsuya Kawaguchi,
Isao Satoh.
Cutout Effect on Birefringence of Sliced Injection Molded Products,
成形加工シンポジア'08,
成形加工シンポジア'08講演論文集,
プラスチック成形加工学会,
pp. 161-162,
Nov. 2008.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Study on the Filling and Trnascription Behavior of Molten Polymer to the Microstructure of the Metal Mold during Coating Stage in Melt-transcription Molding Process,
第19回プラスチック成形加工学会年次大会,
成形加工'08,
pp. 187-188,
June 2008.
-
Motoki Noukou,
Takushi Saito,
Tatsuya Kawaguchi,
Isato Satoh.
Micro Molding System for Themoplastic Materials using Strong Ultrasonic Wave,
第19回プラスチック成形加工学会年次大会,
成形加工'08,
pp. 143-144,
June 2008.
-
Sunao Endo,
Isao Satoh,
Tatsuya Kawaguchi,
Takushi Saito.
Interferometric CT Measurement of Refractive Index Distribution of Injection Molded Transparent Products Inside,
第19回プラスチック成形加工学会年次大会,
成形加工 ' 08,
pp. 301-302,
June 2008.
-
Takamasa Degawa,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Investigation of Microbubble Dissolution by Means of the Interferometric Laser Imaging Technique,
第45回日本伝熱シンポジウム,
第45回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 373-374,
May 2008.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
Study on the Transcription Behavior of Polymer in Melt-Transcription Molding Process,
成形加工シンポジア'07,
pp. 75-76,
Nov. 2007.
-
Takushi Saito,
Yusuke Hanaoka,
Tatsuya Kawaguchi,
Isao Satoh,
Shinichi Sugiyama,
Yoshinari Naito,
Shinichi Furuno.
Fundamental Study on Exterior Quality Evaluation of Injection Molded Plates Containing Aluminum Flakes,
成形加工シンポジア'07,
pp. 173-174,
Nov. 2007.
-
Motoki Noukou,
Takushi Saito,
Tatsuya Kawaguchi,
Isato Satoh.
Fundamental Study of Molding System for Thermoplastic Materials using Ultrasonic Vibration,
成形加工シンポジア'07,
pp. 73-74,
Nov. 2007.
-
Takushi Saito,
Hiroshi Ito,
Tatsuya Kawaguchi,
Isao Satoh.
Visualization Study of Spreading Behavior in Coating Process of High Viscous Fluid,
可視化情報全国講演会講演論文集,
pp. 149-150,
Oct. 2007.
-
Toshimitsu Takaoka,
Shinsuke Kawai,
Hiroshi Owari,
Seiichiro Kitagawa,
Kunihiko Kazama,
Toshiyuki Yasuhara,
Takushi Saito,
Hiroshi Ito.
Replication and High-order Structure if Injection Molded Products with Sub-micron Structures of Amorphous Polymers (Part 2),
成形加工'07,
成形加工'07講演論文集,
pp. 221-222,
June 2007.
-
Yuta Hara,
Hiroshi Ito,
Takushi Saito,
Tatsuya Kawaguchi,
Isato Satoh.
Study on Coating Behavior of High Viscous Fluid Modeling the Melt Transcription Molding Process,
成形加工'07,
成形加工'07講演論文集,
pp. 233-234,
June 2007.
-
Hiromichi Kitamura,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Visualization of Micro-scale Self-organizing Structure on Polymeric Material Surface using CO2 Laser Irradiation,
成形加工'07,
成形加工'07講演論文集,
pp. 143-144,
June 2007.
-
Takushi Saito,
Tomonori Nishi,
Tatsuya Kawaguchi,
Isao Satoh.
Study on Local Heating Technique for Transparent Polymeric Material using Radiation Absorption Control of the Material,
成形加工'07,
成形加工'07講演論文集,
pp. 109-110,
June 2007.
-
Takamasa Degawa,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Investigation of Dissolution Behavior of Microbubble in Water by Using Interferometric Laser Imaging Technique,
第44回日本伝熱シンポジウム,
第44回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 85-86,
May 2007.
-
Takayuki Hirano,
Tatsuya Kawaguchi,
Takushi Saito,
Isao Satoh.
Accuracy Improvement of Interferometric Temperature Measurement for Curved Surface under Forced Convection,
第44回日本伝熱シンポジウム,
第44回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 17-18,
May 2007.
-
Tomonori Nishi,
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Control Technique for Local Heating using Material Property Change caused by Optical or Thermal Excitation,
第44回日本伝熱シンポジウム,
第44回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 729-730,
May 2007.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Micro-scale Visualization of Hot Embossing Lithography Process from Transcription to De-molding,
成形加工シンポジア'06,
成形加工シンポジア'06講演論文集,
pp. 31-32,
Nov. 2006.
-
Hiroshi Ito,
Kunihiko Kazama,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani,
Kazuki Hayashi,
Yoshitoshi Yamagiwa,
Yuichi Sakata.
On-line Optical Retardation Measurement for Thin-wall Micro Channel in Micromolding Process,
成形加工'06,
成形加工'06講演予稿集,
pp. 15-16,
June 2006.
-
Yusuke Isozaki,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Fundamental Study on Micro-scale Structure Transcription using Ultrasonic Vibration,
成形加工'06,
成形加工'06講演予稿集,
pp. 185-186,
June 2006.
-
Toshimitsu Takaoka,
Kazuyuki Yao,
Seiichiro Kitagawa,
Hiroshi Ito,
Toshiyuki Yasuhara,
Takushi Saito.
Transcription Ability and High-order Structure of Injection Molded Products with Sub-micron Scale Structures of Amorphous Polymers,
成形加工'06,
成形加工'06講演予稿集,
pp. 33-34,
June 2006.
-
Mami Furuta,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Study on Temperature Control Technique of Molds using Gas/Liquid Phase Change of Heat Transfer Medium,
成形加工'06,
成形加工'06講演予稿集,
pp. 177-178,
June 2006.
-
Takushi Saito,
Atsushi Tajiri,
Hiroshi Ito,
Toshiyuki Yasuhara,
Isao Satoh,
Tatsuya Kawaguchi.
Feasibility Study of Polymer Processing Monitoring using Interfacial Temperature Measurement,
成形加工'06,
成形加工'06講演予稿集,
pp. 277-278,
June 2006.
-
Itaru Yoshikawa,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Reduction of Energy Consumption in a Glass Furnace by Applying the Pre-melting of Raw Materials in Melting Process,
第43回日本伝熱シンポジウム,
第43回日本伝熱シンポジウム講演論文集,
Vol. 1,
pp. 213-214,
May 2006.
-
Hiroshi Ito,
Isao Satoh,
Takushi Saito,
Kazutoshi Yakemoto.
A Melt Replication Process to Create Plastic products with Fine Surface Micro Patterns Applied to Display Parts and micro-TAS,
日本機械学会熱工学コンファレンス2005,
日本機械学会熱工学コンファレンス2005講演論文集,
pp. 459-460,
Nov. 2005.
-
Takushi Saito,
Atsushi Tajiri,
Hiroshi Ito,
Toshiyuki Yasuhara,
Isao Satoh,
Tatsuya Kawaguchi.
Estimation Technique for Thermal properties of Polymer Materials using Infrared Temperature Measurement,
成形加工シンポジア'05,
成形加工シンポジア'05予稿集,
pp. 273-276,
Nov. 2005.
-
Kunihiko Kazama,
Hiroshi Ito,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani,
Eiki Kunimoto,
Hiroyuki Kobayashi.
Transcription-ability and High-order Structure of Thin-wall Injection Molded Products with Micro-scale Prism Surface,
成形加工シンポジア'05,
成形加工シンポジア'05予稿集,
pp. 253-254,
Nov. 2005.
-
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Study on Local Laser Heating Technique using Photochromic-dye,
日本機械学会熱工学コンファレンス2005,
日本機械学会熱工学コンファレンス2005講演論文集,
pp. 461-462,
Nov. 2005.
-
Hiroshi Ito,
Kunihiko Kazama,
Takushi Saito,
Toshiyuki Yasuhara,
Takeshi Kikutani.
マイクロ薄肉射出成形における転写性と高次構造・物性評価,
第54回高分子討論会,
第54回高分子討論会予稿集,
Vol. 54,
No. 2,
pp. 5398-5399,
Sept. 2005.
-
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
タルク添加されたプロプロピレン製射出成形品におけるフローマーク発現機構の研究,
第54回高分子討論会,
第54回高分子討論会予稿集,
Vol. 54,
No. 2,
pp. 5400-5401,
Sept. 2005.
-
Yuichi Okada,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
Visualization of Micro-scale Surface Forming Process by Infrared Pulse Laser Heating,
第33回可視化情報シンポジウム,
第33回可視化情報シンポジウム予稿集,
pp. 357-358,
July 2005.
-
Tomohide Yano,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Interferometric CT Mesurement of Three Dimensional Temperature Distribution around Cylinder Surface,
第33回可視化情報シンポジウム,
第33回可視化情報シンポジウム予稿集,
pp. 373-374,
July 2005.
-
Shin-nosuke Ide,
Takushi Saito,
Hiroshi Ito,
Toshiyuki Yasuhara,
Isao Satoh,
Tatsuya Kawaguchi.
A Study on Weld Strength of Thin-wall Injection Molded Products,
成形加工'05,
成形加工'05予稿集,
pp. 81-82,
June 2005.
-
Hiroshi Ito,
Yoshiaki Hada,
Kunihiko Kazama,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani.
Processability and High-order Structure of Thin-wall Molded Products with Micro-feature,
成形加工'05,
成形加工'05予稿集,
pp. 79-80,
June 2005.
-
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Challenges on Radiation Energy Application for Polymer Processing,
成形加工'05,
成形加工'05予稿集,
pp. 453-454,
June 2005.
-
Hiroshi Ito,
Toshiyuki Yasuhara,
Takushi Saito,
Takeshi Kikutani,
Yoshitoshi Yamagiwa.
Fundamental Study of Process-Structure-Property Interaction of Micro Polymer Processing,
成形加工'05,
成形加工'05予稿集,
pp. 437-438,
June 2005.
-
Minoru Miyabe,
Takushi Saito,
Isao Satoh,
Tatsuya Kawaguchi.
Novel Laser Welding Technique for Transparent Material by Phorochromic-dye Addition,
成形加工'05,
成形加工'05予稿集,
pp. 291-292,
June 2005.
-
Hiroshi Aihara,
Toshiyuki Yasuhara,
Hiroshi Ito,
Takushi Saito,
Kazuki Enomoto,
Naoto Ohtake.
Mechanical and Electrical Properties of Thin-walled CNF Composites in Injection Molding,
成形加工'05,
成形加工'05予稿集,
pp. 95-96,
June 2005.
-
Atsushi Takata,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi,
Kazutoshi Yakemoto,
Hiroshi Ito.
A Microscopic Study on Micro-scale Transcription Mechanism of Hot Embossing Lithography,
成形加工'05,
成形加工'05予稿集,
pp. 83-84,
June 2005.
-
Kazumoto Shima,
Isao Satoh,
Takushi Saito,
Tatsuya Kawaguchi.
A Study on Adhesion Behavior of Heated Beads Pressed onto Polymer Material,
第42回日本伝熱シンポジウム,
第42回日本伝熱シンポジウム講演論文集,
Vol. 3,
pp. 749-750,
May 2005.
-
Tomohide Yano,
Tatsuya Kawaguchi,
Isao Satoh,
Takushi Saito.
Surface Temperature Monitoring for Cylindrical Surface by Interferometric Computational Tomograhpy,
第42回日本伝熱シンポジウム,
第42回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 313-314,
May 2005.
-
Inamura,
KAZUYOSHI FUSHINOBU,
TAKUSHI SAITO,
ISAO SATOH.
高分子材料のエキシマレーザアブレーション機構の検討(エキシマレーザ照射によるポリエチレンの紫外線吸収量の変化),
第38回日本伝熱シンポジウム講演論文集,
Vol. 2,
pp. 499-500,
2001.
Other Publication
-
TAKUSHI SAITO.
温調機構の工夫による射出成形金型の省エネルギー化<金型温調にヒートパイプと薄膜発熱体の適用を試みる>,
プラスチックス,
Vol. 69,
No. 12,
pp. 1-5,
Dec. 2018.
-
Takushi Saito,
Tatsuya Kawaguchi,
Isao Satoh.
Laser Interferometric CT of Refractive Index Distribution of Transparent Products,
Seikei-Kakou,
Vol. 21,
No. 10,
pp. 590-594,
Sept. 2009.
-
Takushi Saito.
Nanoimprint lithography is profound!,
Journal of the Japan Society for Precision Engineering,
Vol. 75,
No. 8,
pp. 958-961,
Aug. 2009.
-
Yoshio Saito,
Takushi Saito,
Seiichiro Hara.
Monodukuri and Creative Education (Creative Projects for Mechanical and Intelligent Systems),
設計工学,
Vol. 40,
No. 11,
pp. 568-573,
Nov. 2005.
-
Isao Satoh,
Takushi Saito.
伝熱工学から見たプラスチック射出成形金型の能動的温度制御技術,
型技術,
Vol. 20,
No. 7,
pp. 14-18,
July 2005.
Patent
Degree
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|