|
Publication List - KUNIO TAKAHASHI (328 entries)
Journal Paper
-
Kunio Takahashi,
Keiichiro Hamada.
A method to determine surface tension for axisymmetric meniscus in gravity from positional coordinates and tangential angles of arbitrary two points on liquid surface,
Quarterly Journal of The Japan Welding Society,
日本印刷出版株式会社,
Vol. 40,
no. 4,
pp. 210-215,
Nov. 2022.
-
Yuki Taoka,
Terumichi Hayashi,
Pasomphone Hemthavy,
Kunio Takahashi,
Shigeki Saito.
Development of a bipolar electrostatic chuck with a compliant beam-array assembly having four 3D-printed layers for large film handling,
Engineering Research Express,
IOP Publishing,
Volume 4,
Number 1,
Jan. 2022.
-
Kunio Takahashi,
Naoki Masumoto.
A non-iterative method to evaluate surface tension and contact angle simultaneously by a sessile drop in gravity using universal figures,
Welding International,
vol. 35,
issue 4-6,
pp. 230-239,
Dec. 2021.
-
TAKAHASHI Kunio,
MASUMOTO Naoki.
A non-iterative method to evaluate surface tension and contact angle simultaneously by a sessile drop in gravity using universal figures,
quarterly journal of the Japan Welding Society,
vol. 39,
no. 1,
pp. 32-38,
Feb. 2021.
Official location
-
Kunio Takahashi,
Yoji Iguchi,
Keiichiro Hamada,
Pasomphone Hemthavy,
Shigeki Saito.
Proposal and applicability of a method to evaluate surface tension of liquid using large volume sessile drop in gravity,
Welding International,
vol. 33,
Issue 4-6,
pp. 241-247,
Jan. 2021.
-
TAKAHASHI Kunio,
IGUCHI Yoji,
HAMADA Keiichiro,
HEMTHAVY Pasomphone,
SAITO Shigeki.
Proposal and applicability of a method to evaluate surface tension of liquid using large volume sessile drop in gravity,
quarterly journal of the Japan Welding Society,
vol. 38,
no. 3,
pp. 193-198,
Oct. 2020.
-
Pasomphone Hemthavy,
Kenta Kudo,
Kento Kawano,
Kunio Takahashi,
Shigeki Saito.
Compliant bipolar electrostatic gripper using 3D-printed-layered elastic probes,
Engineering Research Express,
Jan. 2020.
-
Pasomphone Hemthavy,
Kenta Kudo,
Kento Kawano,
Kunio Takahashi,
Shigeki Saito.
Compliant bipolar electrostatic gripper using 3D-printed-layered elastic probes,
Engineering Research Express,
IOP Publishing Ltd,
Volume 2,
Number 1,
pp. 1-9,
Jan. 2020.
Official location
-
Yoji Iguchi,
Dooyoung Baek,
Satoshi Momozono,
Pasomphone Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Adhesional Contact between Rigid Sphere and Elastic Plane Covered with Thin Liquid Film Considering Contact-Angle Hysteresis,
Tribology Online,
15,
1,
1-8,
Jan. 2020.
-
Seungman Choi,
Kazuki Wakabayashi,
KUNIO TAKAHASHI,
Shigeki SAITO.
Development of a Bipolar Electrostatic Chuck Module having a Beam-array Assembly using a Multiple-Etching Process,
Journal of Micromechanics and Microengineering,
IOP Publishing,
Oct. 2018.
-
Ryo Fujiwara,
Yoji Iguchi,
KUNIO TAKAHASHI,
Shigeki SAITO.
Humidity dependence of electrostatic pick-and-place operation of a micro dielectric particle considering surface conductivity and capillary condensation,
Journal of Applied Physics,
AIP Publishing,
Vol. 124,
No. 6,
pp. 064303,
Aug. 2018.
-
Dooyoung Baek,
Shigeki SAITO,
KUNIO TAKAHASHI.
Estimating work of adhesion using spherical contact between a glass lens and a PDMS block,
Journal of Adhesion Science and Technology,
Taylor & Francis,
Vol. 32,
No. 2,
pp. 158-172,
Jan. 2018.
-
Dooyoung Baek,
Shigeki Saito,
Kunio Takahashi.
Estimating work of adhesion using spherical contact between a glass lens and a PDMS block,
Journal of Adhesion Science and Technology,
Volume 32,
2,
Page 158-172,
June 2017.
Official location
-
Dooyoung Baek,
Pasomphone Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Evaluation of energy dissipation involving adhesion hysteresis in spherical contact between a glass lens and a PDMS block,
Applied Adhesion Science,
Vol. 5,
No. 4,
pp. 1-11,
Feb. 2017.
Official location
-
Ryo Fujiwara,
Pasomphone Hemthavy,
Kunio Takahashi,
Shigeki Saito.
The effect of surface conductivity and adhesivity on the electrostatic manipulation condition for dielectric microparticles using a single probe,
Journal of Micromechanics and Microengineering,
IOP,
Vol. 26,
pp. 055010(1-10),
Apr. 2016.
-
Radon Dhelika,
Pasomphone Hemthavy,
Kunio Takahashi,
Shigeki Saito.
Compliant bipolar electrostatic gripper with micropillar electrodes array for manipulation at macroscale,
Smart Materials and Structure,
IOP,
Vol. 25,
pp. 055037(1-10),
Apr. 2016.
-
Yu Sekiguchi,
Kunio Takahashi,
Chiaki Sato.
Adhesion mechanism of a gecko-inspired oblique structure with an adhesive tip for asymmetric detachment,
Journal of physics D : applied physics,
IOP Science,
Volume 48,
Number 47,
475301,
Oct. 2015.
Official location
-
Yu Sekiguchi,
shigeki saito,
kunio takahashi,
chiaki sato.
Flexibility and Poisson effect on detachment of gecko-inspired adhesives,
International Journal of Adhesion and Adhesives,
Elsevier,
Volume 62,
Page 55-62,
July 2015.
Official location
-
Ryo Fujiwara,
Pasomphone Hemthavy,
Kunio Takahashi,
Shigeki Saito.
Pulse voltage determination for electrostatic micro manipulation considering surface conductivity and adhesion of glass particle,
AIP Advances,
AIP,
Vol. 5,
pp. 057126(1-12),
May 2015.
-
Kazuki Wakabayashi,
Pasomphone Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Change in Temperature Distribution by Constriction of Electric Current through Contact Area,
Science and Technology of Welding and Joining,
Vol. 20,
pp. 337-344,
Apr. 2015.
-
Vichiensamuth, T.,
Pimsarn, M.,
KUNIO TAKAHASHI,
Tantanawat, T..
A simplified model of a reinforced square hollow section T-joint for stress evaluation in bus superstructures,
International Journal of Computer Applications in Technology,
Vol. 52,
No. 4,
pp. 228-236,
2015.
-
PASOMPHONE HEMTHAVY,
Takehiko Yazaki,
Boqing Wang,
Yu Sekiguchi,
KUNIO TAKAHASHI.
Effect of sape of elastic beam hair on its adhesion with wavy surfaces,
IOP Conference Series: Materials Science and Engineering,
IOPScience,
Volume 61,
012043,
Aug. 2014.
Official location
-
Dooyoung Baek,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Analysis of adhesive elastic contact between a silica glass lens and silicone rubber using the JKR theory,
IOP Conference Series: Materials Science and Engineering,
IOP Publishing,
Volume 61,
Aug. 2014.
Official location
-
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Experiments of the adhesion behavior between an elastic beam and a substrate,
International Journal of Adhesion and Adhesives,
Vol. 49,
pp. 1-6,
Mar. 2014.
Official location
-
Radon Dhelika,
Kenji Sawai,
Kunio Takahashi,
Wataru Takarada,
Takeshi Kikutani,
Shigeki Saito.
Electrostatic chuck consisting of polymeric electrostatic inductive fibersfor handling of objects with rough surfaces,
Smart Materials and Structures,
No. 22,
pp. 9,
Aug. 2013.
Official location
-
Shigeki SAITO,
Fumiaki Soda,
Radon Dhelika,
KUNIO TAKAHASHI,
wataru takarada,
TAKESHI KIKUTANI.
Compliant electrostatic chuck based on hairy microstructure,
Smart Materials and Structures,
IOP Publiching,
Vol. 22,
pp. 015019(1-6),
Dec. 2012.
-
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Adhesion between side surface of an elastic beam and flat surface of a rigid body,
Journal of Adhesion Science and Technology,
Vol. 26,
No. 23,
2615-2626,
Aug. 2012.
Official location
-
Y Sekiguchi,
P Hemthavy,
S Saito,
K Takahashi.
Separation mechanisms of reversible adhesive joining using an elastic body with variable elastic modulus,
Journal of Physics: Conference Series,
Volume 379,
012041,
Aug. 2012.
Official location
-
Pasomphone Hemthavy,
Mohd Fahmi Bin Samir,
Shigeki Saito,
Kunio Takahashi.
Time dependence of adhesion contact between a rigid sphere and an elastic body,
Journal of Physics: Conference Series,
IOP Publishing,
Volume 379,
pp. 1-7,
Aug. 2012.
Official location
-
M Tanaka,
P Hemthavy,
K Takahashi.
Optimization of control parameters of a boost converter for energy harvesting,
Journal of Physics: Conference Series,
IOP Publishing,
Volume 379,
pp. 1-6,
Aug. 2012.
Official location
-
Y Honda,
M Tanaka,
Y Sekiguchi,
P Hemthavy,
Kunio Takahashi.
Optimum condition of boost switching regulator for charging tiny electric energy to capacitor,
Journal of Physics: Conference Series,
IOP Publishing,
Volume 379,
pp. 1-5,
Aug. 2012.
Official location
-
Daizo Nakabayashi,
Kenji Sawai,
Kunio Takahashi,
Shigeki Saito.
Electrostatic deposition of a micro solder particle using a single probe by applying a single rectangular pulse,
journal of Micromechanics and Microengineering,
Vol. 22,
pp. 085003(1-9),
2012.
-
Y. Sekiguchi,
L. Lei,
P. Hemthavy,
K. Takahashi.
Mechanisms for Grip-and-Release Process of Adhesion Contact Using Material with Variable Elastic Modulus,
Journal of Adhesion Science and Technology,
Volume 24,
Number 11-12,
pp. 1819-1830,
Sept. 2010.
Official location
-
LEI Lei,
TAKAHASHI Kunio,
A. Sriwijaya R. Rachmat,
PASOMPHONE Hemthavy.
Effect of the surface roughness of a rigid body in contact with an elastic body upon the contact width,
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY,
JAPAN WELDING SOCIETY,
Vol. 27,
No. 2,
p. 196s-199s,
June 2009.
Official location
-
KUNIO TAKAHASHI,
PASOMPHONE HEMTHAVY,
SRIWIJAYA RACHMAT,
lei lei,
ジャトミコ クスモ,
Shigeki SAITO.
Possibility of Reversible Joint by Variable Elastic Modulus - An application of area adhesion between solids -,
Quarterly Journal of the Japan Welding Society,
Japan Welding Society,
vol. 26,
no. 4,
pp. 292-297,
Dec. 2008.
Official location
-
Lei Lei,
Kunio Takahashi,
A.Sriwijaya R.Rachmat,
Hemthavy Pasomphone.
Effect of the surface roughness of a rigid body upon the contact width in contact with an elastic body,
Proceedings of 8th International Welding Symposium,
pp. 325-325,
Nov. 2008.
-
Yingchen Yin,
Kunio Takahashi,
Kento Tokumaru,
Shigeki Saito,
Pasomphone Hemthavy.
Expansion of the Applicability of the Modified Embedded Atom Method to Non-Bulk Systems,
Journal of Computational and Theoretical Nanoscience,
Vol. 4,
No. 6,
pp. 1166-1173,
Sept. 2007.
-
R. R. A Sriwijaya,
K. Jatmiko,
K. Takahashi.
An analytical approach for the adhesion of a semi-infinite elastic body in contact with a sinusoidal rigid surface under zero external pressure,
Journal of Adhesion Science and Technology,
Vol. 21,
No. 10,
pp. 899-909,
2007.
-
J.Berengueres,
K.Takahashi.
A surface definition method for an interfacial energy database,
Data Science Journal,
Vol. 4,
pp. 140-150,
Jan. 2006.
-
Kunio Takahashi,
Jose Oriol Lopez Berengueres,
Kenichi J. Obata,
Shigeki Saito.
Geckos' foot hair structure and their ability to hang from rough surfaces and move quickly,
International journal of adhesion & adhesives,
Vol. 26,
pp. 639-643,
2006.
-
Yingchen Yin,
Kunio Takahashi,
Xiaoyin Yuan,
Tadao Onzawa.
Dimerreference embedded atom method (DR-EAM) and its application to vacancyformation energy of FCC metals,
Quarterly Journal of the Japan Welding Society,
Vol. 23,
No. 4,
pp. 509-514,
2005.
-
Shigeki Saito,
Tomoyuki Motokado,
Kenichi J. Obata,
Kunio Takahashi.
Capillary force with a concave probe-tip for micromanipulation,
Applied Physics Letters,
Vol. 87,
pp. 1-3,
2005.
-
KUNIO TAKAHASHI.
Dimer Reference Embedded Atom Method,
Journal of computational and theoretical nanoscience,
Vol. 1,
No. 2,
pp. 227-232,
June 2004.
-
S. Erkoc,
K. Takahashi.
A comparative study of empirical potential energy functions: Applications to silicon microclusters,
International Jouranal of Modern Physics C,
Vol. 15,
pp. 403-408,
2004.
-
KUNIO TAKAHASHI.
表面張力と表面エネルギー,
ぶれいず,
Vol. 38,
No. 109,
pp. 52-59,
2004.
-
韓敏,
高橋邦夫,
恩澤忠男,
齋藤滋規.
誘電体における静電マニピュレーションの境界要素解析,
溶接学会全国大会講演概要,
Vol. 75,
pp. 158-159,
2004.
-
KUNIO TAKAHASHI.
Extension of Applicability of Embedded Atom Method by Dimer Referencing,
Proceedings of International Conference on Scientific and Engineering Computation,
pp. TS-CMM-4,
2004.
-
栗原健児,
高橋邦夫,
齋藤滋規,
恩澤忠男.
表面相互作用等のノイズの多い非線形系に対する制御計測システムの試作,
溶接学会全国大会講演概要,
Vol. 75,
pp. 160-161,
2004.
-
勝田治,
高橋邦夫,
恩澤忠男,
齋藤滋規.
相変態を利用した微小物体操作法,
溶接学会全国大会講演概要,
Vol. 75,
pp. 156-157,
2004.
-
尾畑賢一,
本門智之,
齋藤滋規,
高橋邦夫,
恩澤忠男.
物体形状が液架橋のラプラス圧に及ぼす影響とその微小物体操作への応用,
社)日本高圧力技術協会 平成16年度(2004)春季講演会講演概要集,
pp. 5-6,
2004.
-
殷 迎晨,
高橋邦夫,
苑暁迎,
恩澤忠男.
Improvement of Dimer Reference Embedded Atom Method (DR-EAM) and its application to FCC materials,
Preprints of the national meeting of JWS,
Vol. 74,
pp. 112-113,
2004.
-
Kenichi J. Obata,
Tomoyuki Motokado,
Shigeki Saito,
Kunio TAKAHASHI.
A scheme for micro-manipultaion based on capillary force,
Journal of Fluid Mechanics,
Vol. 498,
pp. 113-121,
2004.
-
Kunio Takahashi,
Yifang Ouyang.
Extension of applicability of embedded atom method,
Proceedings of The 4th International Conference on Physical and Numerical Simulation of Materials Processing (ICPNS'04),
pp. G2-25,
2004.
-
Kenichi J. Obata,
Shigeki Saito,
Kunio Takahashi.
A scheme of micromanipulation using a liquid bridge,
Material Research Society Symposium Proceeding,
Vol. 782,
pp. A3.6,
2004.
-
KunioTAKAHASHI,
ShigekiSAITO,
Kenichi J. OBATA.
Manipulation for micro-assembly,
Proceedings of AUN/SEED-Net 3rd Field-Wise Seminar on Manufacturing and Material Processing Techonology,
pp. 1-8,
2004.
-
Kenichi J. Obata,
Shigeki Saito,
Kunio Takahashi.
Stability analysis of a liquid bridge for micromanipulation,
Advances in Fluid Mechanics,
Vol. 5,
pp. 53-62,
2004.
-
S. Erkoc,
K. Takahashi.
A comparative study of empirical potential energy functions: Applications to silicon microclusters,
Int. J. Mod. Phys. C,
Vol. 15,
No. 3,
pp. 403-408,
2004.
-
渡辺茂,
高橋邦夫,
恩澤忠男.
グロー・アーク遷移領域におけるプラズマ状態の観察,
(社)日本高圧力技術協会 平成15(2003)年度春期講演会概要集,
pp. 5-6,
2003.
-
高橋邦夫,
齋藤滋規.
静電力と凝着力による微小体マニピュレーション,
(社)溶接学会マイクロ接合研究委員会第72回委員会資料,
pp. 1-9,
2003.
-
Shigeki Saito,
Hideo Himeno,
Kunio Takahashi,
Tadao Onzawa.
Voltage Criterion for Electrostatic Detachment of a Microparticle from a Micromanipulated Probe,
International Conference on Processing & Manufacturing of Advanced Materials,
Vol. 426-432,
pp. 2345-2350,
2003.
-
尾畑賢一,
齋藤滋規,
高橋邦夫.
液架橋の体積制御による微小体操作法,
日本ロボット学会第21回学術講演会講演概要集,
pp. 195-195,
2003.
-
K.Takahashi,
Y.An,
S.Saito,
T.Onzawa.
Introduction of micro-manipulation by adhesional force and dielectric force,
Technical Proceedings of the 2003 Nanotechnology Conference and Trade Show,
Vol. 11,
pp. 518-521,
2003.
-
Shigeki Saito,
Hideo Himeno,
Kunio Takahashi,
Masataka Urago.
Kinetic control of a particle by voltage sequence for a nonimpact electrostatic micromanipulation,
Applied Physics Letters,
Vol. 83,
No. 10,
pp. 2076-2078,
2003.
-
Shigeki Saito,
Hideo Himeno,
Kunio Takahashi,
Tadao Onzawa.
Criterion for Electrostatic Detachment of an Adhering Microparticle,
Technical Proceedings of the 2003 Nanotechnology Conference and Trade Show,
Vol. 3,
pp. 98-101,
2003.
-
Xiaoying Yuan,
Kunio Takahashi,
Yifang Ouyang,
Tadao Onzawa.
Development of modified embedded atom method for a bcc transition metals,
Journal of Physics : Condensed Matter,
Vol. 15,
pp. 8917-8926,
2003.
-
Xiaoying Yuan,
Kunio Takahashi,
Yingchen Yin.
Development of Modified Embedded Atom Method for Alkali Metals,
Processing and Properties of Advanced Engineering Materials, (Jeju Island, Korea, 5-8 November 2003),
pp. 234,
2003.
-
苑暁迎,
高橋邦夫,
恩澤忠男.
非バルク系へ適応範囲を拡張した修正埋め込み原子法,
応用物理学会講演予稿集,
Vol. 50,
pp. 717,
2003.
-
苑暁迎,
高橋邦夫,
恩澤忠男.
Development of Modified Embedded Atom Method to non-bulk system for bcc transition metals,
溶接学会全国大会講演概要,
Vol. 73,
pp. 128-129,
2003.
-
殷 迎晨,
高橋邦夫,
苑暁迎,
恩澤忠男.
Parameters of Dimer Reference Embedded Atom Method (DR-EAM) and its application,
溶接学会全国大会講演概要,
Vol. 73,
pp. 126-127,
2003.
-
Shigeru Watanabe,
Shigeki Saito,
Kunio Takahashi,
Tadao Onzawa.
Observations of the glow-to-arc transition between thoriated tungsten electrodes with a parallel RC circuit,
Journal of Physics D,
Vol. 36,
No. 20,
pp. 2521-2525,
2003.
-
名越達彦,
齋藤滋規,
高橋邦夫,
恩澤忠男.
Effect of Electron Beam Irradiation in Micro-manipulation under Scanning Electron Microscope,
9th symposium Microjoining and Assembly Technology in Electronics (mate2003),
pp. 87-90,
2003.
-
Kunio Takahashi,
Tadao Onzawa.
Theoretical Interpretation of Adhesion Phenomena and its Application to Micro-Manipulation,
International Conference on Processing & Manufacturing of Advanced Materials,
Vol. 426-432,
pp. 2231-2236,
2003.
-
KUNIO TAKAHASHI.
Micro-manipulation with adhesion and dielectric interaction,
proc. of Designing of Interfacial Structures in Advanced Materials and their Joints 2003 (DIS'03),
pp. 29-36,
2003.
-
KUNIO TAKAHASHI.
特集マイクロ接合「静電力と凝着力による微小体マニピュレーションの可能条件域」,
溶接学会誌,
Vol. 72,
No. 3,
pp. 181-184,
2003.
-
KUNIO TAKAHASHI.
特集分子動力学「表面エネルギー予測への応用」,
溶接学会誌,
Vol. 72,
No. 6,
pp. 503-506,
2003.
-
Shigeki Saito,
Hideo Himeno,
Kunio Takahashi.
Electrostatic detachment of an adhering particle from a micromanipulated probe,
Journal of Applied Physics,
Vol. 93,
No. 4,
pp. 2219-2224,
2003.
-
Xiaoying Yuan,
Kunio Takahashi,
Yingchen Yin,
Tadao Onzawa.
Development of modified embedded atom method for a bcc metal: lithium,
Modelling Simul. Mater. Sci. Eng.,
Vol. 11,
No. 4,
pp. 447-456,
2003.
-
尾畑賢一,
齋藤滋規,
高橋邦夫,
恩澤忠男.
Analysis of Capillary Forces for Micromanipulation,
9th symposium Microjoining and Assembly Technology in Electronics (mate2003),
pp. 81-86,
2003.
-
Masataka Urago,
Takafumi Koyama,
Kunio Takahahi,
Shigeki Sito,
Yoshihiro Mochimaru.
Fast multipole boundary element method using the binary tree stucture with tight bounds: application to a calculation of an electrostatic force for the manipulation of a metal micro particle,
Engineering Analysis with Boundary Elements,
Vol. 27,
pp. 835-844,
2003.
-
尾畑賢一,
齋藤滋規,
高橋邦夫,
恩澤忠男.
液体体積制御による微小体操作法,
溶接学会全国大会講演概要集,
Vol. 72,
pp. 192-193,
2003.
-
高橋邦夫,
永田和宏.
熱伝導度の液体に於ける計測値の信頼性に対する理論的検討,
(社)溶接学会平成15年度春期全国大会特別セッション資料NEDOプロジェクト中間成果報告[溶接技術の高度化による高効率・高信頼性溶接技術の開発],
pp. 37-38,
2003.
-
ウィスヌ ウィハンドコ,
高橋邦夫,
井上誠一.
インドネシアガスパイプラインプロジェクト計画に関する一考察(-溶接技術の海外移転のあり方-),
溶接学会全国大会講演概要,
Vol. 72,
pp. 190-191,
2003.
-
YingChen Yin,
Kunio Takahashi,
XiaoYing Yuan,
Tadao Onzawa.
Influence of Near Neighbor Atoms on the Energy of Cubic Material in Modified Embedded Atom Method (MEAM),
proc. of Designing of Interfacial Structures in Advanced Materials and their Joints 2002 (DIS'02),
pp. 43-48,
2002.
-
渡辺茂,
齋藤滋規,
高橋邦夫,
恩澤忠男.
グロー・アーク遷移現象におけるプラズマの電流電圧特性,
溶接学会論文集,
Vol. 20,
No. 4,
2002.
-
Shigeki Saito,
Hideki T. Miyazaki,
Tomomasa Sato,
Kunio Takahashi.
Kinematics of mechanical and adhesional micro-manipulation under a scanning electron microscope,
Journal of Applied Physics,
Vol. 92,
No. 6,
pp. 5140-5149,
2002.
-
高橋邦夫,
殷 迎晨,
恩澤忠男.
Dimer Reference Embedded Atom Method ( DREAM),
(社)日本高圧力技術協会 平成14(2002)年度秋期講演会概要集,
pp. 31-32,
2002.
-
孫存之,
渡辺茂,
高橋邦夫,
恩澤忠男.
Comparison of the plasma between glow-to-arc transition region and its near region,
溶接学会全国大会講演概要,
Vol. 71,
pp. 276-277,
2002.
-
高橋邦夫,
恩澤忠男.
Extension of the applicabiliy by dimer referencing in embedded atom method,
溶接学会全国大会講演概要,
Vol. 71,
pp. 102-103,
2002.
-
浅井琢哉,
齊藤滋規,
高橋邦夫,
恩澤忠男.
Probe tip electropolishing to extend the range of operation conditions,
溶接学会全国大会講演概要,
Vol. 71,
pp. 100-101,
2002.
-
Kunio Takahashi,
Hideo Himeno,
Shigeki Saito,
Tadao Onzawa.
ADHESION PHENOMENON AND ITS APPLICATION TO MANIPULATION FOR MICRO-ASSEMBLY,
Proc. of the international Welding/Joining Conference-Korea 2002,
pp. 781-784,
2002.
-
Shigeki Saito,
Kunio Takahashi,
Tadao Onzawa.
MECHANICAL AND ADHESIONAL MANIPULATION TECHNIQUE FOR MICRO-ASSEMBLY UNDER SEM,
Proc. of the international Welding/Joining Conference-Korea 2002,
pp. 720-725,
2002.
-
Kunio Takahashi.
Applicability of Embedded Atom Method (EAM) Series to Surface and Interface Problems,
proc. of Designing of Interfacial Structures in Advanced Materials and their Joints 2002 (DIS'02) ,
pp. 74-79,
2002.
-
XiaoYing Yuan,
Kunio Takahashi,
YingChen Yin,
Tadao Onzawa.
Determination of Parameters of Modified Embedded Atom Method for Alkali Metals,
proc. of Designing of Interfacial Structures in Advanced Materials and their Joints 2002 (DIS'02),
pp. 49-53,
2002.
-
YifFang Ouyang,
Kunio Takahashi.
Thermodynamic Properties and Stability of Structure of Titanium Oxides Calculated with EAM,
proc. of Designing of Interfacial Structures in Advanced Materials and their Joints 2002 (DIS'02),
pp. 54-57,
2002.
-
Shigeki SAITO,
Hideki MIYAZAKI,
Tomomasa SATO,
KUNIO TAKAHASHI.
Analysis of Micro-object Operation Based on the Dynamics Considering the Adhesion under SEM,
Journal of the Robotics Society of Japan,
Vol. 20,
No. 3,
pp. 324-334,
2002.
-
KUNIO TAKAHASHI,
恩澤忠男.
Formalism of Modified Embedded Atom Method n Application to Dimer Systems -Fundamental study of Applicability of Modified Embedded Atom Method to joining and Adhesion Problems-,
Quarterly Journal of the Japan Welding Society,
Vol. 20,
No. 1,
pp. 63-67,
2002.
-
高橋邦夫,
恩澤忠男.
Temperature dependence of surface energy,
溶接学会全国大会講演概要,
Vol. 69,
pp. 248-249,
2001.
-
Shigeki SAITO,
Hideki T. MIYAZAKI,
Tomomasa SATO,
Kunio TAKAHASHI,
Tadao ONZAWA.
Dynamics of Micro-object Operation Considering the Adhesive Effect under an SEM,
Proc. SPIE Microrobotics and Microassembly III,
Vol. 4568,
pp. 12-23,
2001.
-
Shigeki Saito,
Hideki T. Miyazaki,
Tomomasa Sato,
Kunio Takahashi,
Tadao Onzawa.
Analysis of Micro-object Operation Based on the Dynamics Considering the Adhesion under an SEM,
Proc. 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems,
Vol. 3,
pp. 1349-1357,
2001.
-
Kunio TAKAHASHI.
Measuremants and interpretation of adhesion phenomena and its application to micro-manipulation,
Proceedings of The First Taiwan-Japan Workshop on Mechanical and Aerospace Engineering,
Vol. 1,
pp. 344-354,
2001.
-
KUNIO TAKAHASHI.
Strategy to construct a data base of surface- and interfacial tensions,
Proceeding of 2001 international brazing & soldering conference,
pp. 66-71,
2001.
-
XiaoYing YUAN,
Kunio TAKAHASHI,
Shuzo YAGI,
Yingchen YIN,
Tadao ONZAWA.
Modified embedded atom method for dimers and silicon clusters - fundamental study of applicability of Modified Embedded Atom Method to Joining and Adhesion problems -,
proceedings of The 7th International Welding Symposium of the Japan Welding Society,
Vol. 2,
pp. 1259-1264,
2001.
-
KUNIO TAKAHASHI.
Manipulation for Micro Joining,
proceedings of The 7th International Welding Symposium of the Japan Welding Society,
Vol. 2,
pp. 1251-1257,
2001.
-
KUNIO TAKAHASHI.
Micro-object Operation Based on the Dynamic Analysis Considering the Adhesion under an SEM,
proceedings of The 7th International Welding Symposium of the Japan Welding Society,
Vol. 2,
pp. 1243-1250,
2001.
-
KUNIO TAKAHASHI.
V-I Caharacteristics of Plasma in the Glow-to-arc Transition,
proceedings of The 7th International Welding Symposium of the Japan Welding Society,
Vol. 1,
pp. 95-100,
2001.
-
Kunio TAKAHASHI,
Tadao ONZAWA.
Temperature dependence of surface energy,
proceedings of The 7th International Welding Symposium of the Japan Welding Society,
Vol. 2,
pp. 1021-1026,
2001.
-
高橋邦夫,
恩澤忠男.
Possibility of the prediction of temperature dependence of surface tennsion,
(社)日本高圧力技術協会 平成13(2001)年度秋期講演会概要集,
pp. 9-10,
2001.
-
KUNIO TAKAHASHI.
Temperature dependence of surface energy,
溶接学会全国大会講演概要,
Vol. 69,
pp. 294-295,
2001.
-
王愛如,
大橋修,
山口典男,
東保男,
人見宣輝,
高橋邦夫.
Diffusion bonded joint characteristics of Cu treated by Ar ion bombardment,
溶接学会全国大会講演概要,
Vol. 69,
pp. 348-349,
2001.
-
姫野秀雄,
スハイラビンティソイッド,
安越佳,
齊藤滋規,
高橋邦夫,
恩澤忠男.
The boundary element method analysis for a detached particles by Coulomb interactrion,
溶接学会全国大会講演概要,
Vol. 68,
pp. 54-55,
2001.
-
渡辺茂,
高橋邦夫,
恩澤忠男.
Effect of V-I characteristics of Power Supply of the Glow-to-Arc transition,
68集(2001,Spring,4/18-20),p.76-77,(平成13年),
Vol. 68,
pp. 76-77,
2001.
-
Kunio TAKAHASHI,
Hideaki KAJIHARA,
Masataka URAGO,
Shigeki SAITO,
Yoshihiro MOCHIMARU,
Tadao ONZAWA.
Voltage Required to Detach an Adhered Particle by Coulomb Interaction for Micro-Manipulation,
Journal of Applied Physics,
Vol. 90,
No. 1,
pp. 432-437,
2001.
-
Kunio Takahashi,
Kusumo Jatmiko,
Hideki Kajihara,
Masaru Uragou,
Shigeki Saito,
Yoshihiro Mochimaru,
Tadao Onzawa.
Design of Adhesional Bonded Joints for Small Objects,
Proceedings of Electronics Goes Green 2000+, ( VDE VERLAG, Berlin und Offenbach 2000 ) ISBN 3-8007-2569-X,
Vol. 1,
pp. 103-107,
2000.
-
Takahiro YAMAGISHI,
Kunio TAKAHASHI,
Tadao ONZAWA.
Modified embedded atom method (MEAM) calculations for reconstructed (110) surfaces of face centered cubic ( FCC ) metals,
Surface Science,
Vol. 445,
No. 1,
pp. 18-22,
2000.
-
KUNIO TAKAHASHI.
固体間凝着現象の理解と応用,
溶接学会誌,
Vol. 69,
No. 2,
pp. 51-53,
2000.
-
高橋邦夫,
梶原英明,
浦郷正隆,
齊藤滋規,
持丸義弘.
Separation of adhered small particle by Coulomb interaction,
金属学会全国大会講演概要,
Vol. 126,
pp. 69,
2000.
-
高橋邦夫,
齊藤滋規,
浦郷正隆,
持丸義弘,
恩澤忠男.
A procedure to constract the micro-joint structures,
溶接学会全国大会講演概要,
Vol. 67,
pp. 158-159,
2000.
-
苑暁迎,
高橋邦夫,
恩澤忠男.
修正埋め込み原子法を非バルク系に適応する際の問題点に関する検討,
溶接学会全国大会講演概要,
Vol. 67,
pp. 306-307,
2000.
-
浦郷正隆,
杉山正隆,
高橋邦夫,
持丸義弘.
Analysis of force acting on particles in an electrostatic field using boundary element method,
日本機械学会第13回計算力学講演会講演論文集,
Vol. 00-17,
pp. 97-98,
2000.
-
伊藤健彦,
齊藤滋規,
高橋邦夫,
恩澤忠男.
A theoretical analysis of the accelaeration of the Interface-diffusion by changing the bonding pressure,
溶接学会全国大会講演概要,
Vol. 67,
pp. 304-305,
2000.
-
KUNIO TAKAHASHI.
接合工学の展開:冶金学,統計熱力学,そして,応用物理学へ…,
溶接技術,
Vol. 48,
No. 1,
pp. 64-66,
2000.
-
KUNIO TAKAHASHI.
A Method to simulate the interface-diffusion in solid-sate bounding processes considering the elastic deformation,
Material Research Society Symposium Proceeding,
Vol. 653,
pp. Z10.8.1--6,
2000.
-
八木周蔵,
高橋邦夫,
齊藤滋規,
恩澤忠男.
修正埋め込み原子法のシリコンクラスタ(Si2~Si10)に対する適応性,
応用物理学会講演予稿集,
Vol. 47,
pp. 423,
2000.
-
KUNIO TAKAHASHI.
Calculation of surface energy and simulation of reconstruction for Si (111) 3X3, 5X5, 7X7, and 9X9 DAS structure,
Applied Surface Science,
Vol. 151,
No. 3-4,
pp. 299-301,
1999.
-
杉原憲一,
高橋邦夫,
恩澤忠男.
超高真空の固体間凝着現象解析装置内における力計測システムのあり方,
溶接学会全国大会講演概要,
Vol. 65,
pp. 204-205,
1999.
-
恩澤忠男,
高橋康夫,
井上勝敬.
修正埋め込み原子法の表面問題に対する適応性-固体間凝着現象解析手法の検討-,
大阪大学接合科学研究所,平成11年度共同研究発表論文集,
pp. 65-70,
1999.
-
恩澤忠男,
KUNIO TAKAHASHI.
Applicability of Modified Embedded Atom Method to the joining and adhesion problems ,
溶接学会全国大会講演概要,
Vol. 65,
pp. 528-529,
1999.
-
山岸隆裕,
高橋邦夫,
恩澤忠男.
Applicability of Modified Embedded Atom Method (MEAM) potential to (100) surfaces of FCC metals,
5th symposium of Microjoining and Assembly Technology in Electronics (mate'99),
pp. 21-24,
1999.
-
杉原憲一,
高橋邦夫,
恩澤忠男.
Force Measurement System in Ultra-High Vacuum Chamber for Analysis of Adhesion Phenomena -Anaylysis System of Adhesion Phenomena between Surfaces-,
5th symposium of Microjoining and Assembly Technology in Electronics (mate'99),
pp. 15-20,
1999.
-
Kenichi Sugihara,
Kunio TAKAHASHI,
Tadao ONZAWA.
Analysis of adhesional phenomena between surfaces,
Computational Methods in Contact Mechanics,
Vol. 4,
pp. 79-88,
1999.
-
KUNIO TAKAHASHI.
Applicability of a method to calibrate the pulse counting systems of spectrometers ,
Practical Surface Analysis '99,
Vol. 6,
No. 3,
pp. A37-A38,
1999.
-
高梨学,
恩澤忠男,
KUNIO TAKAHASHI.
Current-voltage characteristics of arc plasma at low current (1A-4A) region,
溶接学会全国大会講演概要,
Vol. 63,
pp. 20-21,
1998.
-
恩澤忠男,
KUNIO TAKAHASHI.
Mechanism of Temperature dependence of Surface Energy - Estimation of Surface Energy - ,
溶接学会全国大会講演概要,
Vol. 61,
pp. 470-471,
1997.
-
KUNIO TAKAHASHI.
Effect of surface roughness on the heatless and pressureless bonding for low-energy precise processing,
Journal of High Pressure Institute of Japan,
Vol. 35,
No. 3,
pp. 159,
1997.
-
KUNIO TAKAHASHI.
Stiffness of measurement system and significant figures of displacement which are required to interpret adhesional force curves,
IEICE Transactions on Electronics,
Vol. E80-C,
No. 2,
pp. 255-262,
1997.
-
恩澤忠男,
KUNIO TAKAHASHI.
無加熱・無加圧による超精密低エネルギー接合におよぼす表面粗さの影響,
(社)日本高圧力技術協会 平成8年度秋期講演会概要集,
pp. 27-28,
1996.
-
KUNIO TAKAHASHI.
凝着現象に対する分子動力学の適用性,
溶接学会全国大会講演概要,
Vol. 59,
pp. 226-227,
1996.
-
KUNIO TAKAHASHI.
弾性接触理論によるフォースカーブとその適用性,
溶接学会全国大会講演概要,
Vol. 59,
pp. 222-223,
1996.
-
KUNIO TAKAHASHI.
Effect the Stitlness Measurement System on Adhesion Force Cuvve in the Elastic Continuum,
Journal of Adhesion Science and Technology,
Vol. 10,
No. 1,
pp. 17,
1996.
-
KUNIO TAKAHASHI.
固体間凝着の測定とその解釈,
溶接学会誌,
Vol. 65,
No. 1,
pp. 101-102,
1996.
-
水野亮二,
KUNIO TAKAHASHI,
恩澤忠男.
Mechanizm of adhesion force between solids by measurement system in Auger electron spectroscope,
Quarterly Journal of the Japan Welding Society,
Vol. 14,
No. 4,
pp. 629-632,
1996.
-
水野亮二,
KUNIO TAKAHASHI,
恩澤忠男.
Mechanizm of adhesion force between solids by measurement system in Auger electron spectroscope,
Quarterly Journal of the Japan Welding Society,
Vol. 14,
No. 4,
pp. 629-632,
1996.
-
水野亮二,
KUNIO TAKAHASHI,
恩澤忠男.
Measurement of Adhesion force between Gold and Silicon,
Quarterly Journal of the Japan Welding Society,
Vol. 14,
No. 3,
pp. 523-526,
1996.
-
恩澤忠男,
KUNIO TAKAHASHI.
長距離引力の働く固体間の凝着接合に対する計測系の剛性を考慮した 弾性接触論 ,
溶接学会全国大会講演概要,
Vol. 57,
pp. 160-161,
1995.
-
KUNIO TAKAHASHI.
「固相接合加工のモデリングとシミュレーション」 オーガナイズドセッション「溶接・接合現象のモデリングとシミュレーション」 ,
溶接学会全国大会講演概要,
Vol. 56,
pp. 294,
1995.
-
KUNIO TAKAHASHI.
液体金属のぬれ現象における律速機構,
溶接学会全国大会講演概要,
Vol. 57,
pp. 468-469,
1995.
-
KUNIO TAKAHASHI.
TiとAlの界面反応機構の検討,
溶接学会全国大会講演概要,
Vol. 57,
pp. 484-485,
1995.
-
KUNIO TAKAHASHI.
Structure and the Formation Mechanism at the Interface of Diamond and Active-Metal-Brazing-Filler-Study on Bonding of Diamond to Metals (Report II) -,
Quarterly Journal of The Japan Welding Society,
Vol. 13,
No. 1,
pp. 39-45,
1995.
-
KUNIO TAKAHASHI.
固体間凝着力の計測と接触理論の適用性,
溶接学会全国大会講演概要,
Vol. 57,
pp. 480-481,
1995.
-
KUNIO TAKAHASHI.
Influence of the Stitlness of the Measurement System on the Elastic Adhesional Contact,
Journal of Adhesion Science and Technology,
Vol. 9,
No. 11,
pp. 1451-1464,
1995.
-
KUNIO TAKAHASHI.
解説:固体間凝着力理論,
溶接学会誌,
Vol. 64,
No. 8,
pp. 628,
1995.
-
KUNIO TAKAHASHI.
Solidification Phenomena and Bonding Strength at the interface of Diamond and Active-Metal-Brazing Filler-Study on Bonding of Diamond to Metals (Report I) -,
Quarterly Journal of The Japan Welding Society,
Vol. 12,
No. 4,
pp. 509-514,
1994.
-
KUNIO TAKAHASHI.
Y系超伝導セラミックスの接合性に及ぼす添加材の影響,
溶接学会全国大会講演概要,
Vol. 55,
pp. 292-293,
1994.
-
KUNIO TAKAHASHI.
超高真空の固体間凝着力に及ぼすイオンスパッタリングの影響,
溶接学会全国大会講演概要,
Vol. 55,
pp. 322-323,
1994.
-
KUNIO TAKAHASHI.
原子間力顕微鏡(AFM)を用いた固体間凝着力の計測,
溶接学会全国大会講演概要,
Vol. 55,
pp. 244-245,
1994.
-
KUNIO TAKAHASHI.
Analytic determination of the hot-pressing parameter in the fabrication of fiber reinforced materials (FRM),
溶接学会全国大会講演概要,
Vol. 55,
pp. 300-301,
1994.
-
恩澤忠男,
KUNIO TAKAHASHI.
ジェリウム表面における電子状態の自己無撞着計算に対するウェーブレットの適用-電子論に基づく表面エネルギーの推定- ,
溶接学会全国大会講演概要,
Vol. 55,
pp. 332-333,
1994.
-
KUNIO TAKAHASHI.
Application of the valence Auger analysis to the metal-ceramic interface,
Transactions of the materials research society of Japan, Proceedings of The 3rd IUMRS international conference on advanced materials,
Vol. 16B,
pp. 1221,
1994.
-
KUNIO TAKAHASHI.
Instrument for measurement of the adhesion force in ultrahigh vacuum surface analysis apparatus,
Journal of Vacuum Science and Technology A,,
Vol. 12,
No. 3,
pp. 889-891,
1994.
-
KUNIO TAKAHASHI.
Algorithm for the determination of hot pressing parameters in fabrication of FRM,
Quarterly Journal of The Japan Welding Society,
Vol. 12,
No. 2,
pp. 269-276,
1994.
-
KUNIO TAKAHASHI.
アルミナ短繊維強化Al基複合材料のぬれ性に及ぼす表面研磨の影響,
溶接学会全国大会講演概要,
Vol. 52,
pp. 166-167,
1993.
-
KUNIO TAKAHASHI.
繊維強化複合材料(FRM)の作製条件決定法における材料定数の探索問題,
溶接学会全国大会講演概要,
Vol. 53,
pp. 80-81,
1993.
-
KUNIO TAKAHASHI.
固体チタニウムと液体アミニウムの界面反応に関する基礎的検討,
溶接学会全国大会講演概要,
Vol. 53,
pp. 322-323,
1993.
-
KUNIO TAKAHASHI.
セラミックス-金属摩擦圧接界面の挙動と接合性,
溶接学会全国大会講演概要,
Vol. 53,
pp. 362-363,
1993.
-
KUNIO TAKAHASHI.
アルミナ短繊維強化Al基複合材料の接合部における繊維の挙動,
溶接学会全国大会講演概要,
Vol. 53,
pp. 362-363,
1993.
-
KUNIO TAKAHASHI.
Review of welding in Japan : diffusion bonding, hot pressing and cold pressing,
Journal of the Japan Welding Soc.,
Vol. 62,
No. 5,
pp. 347-350,
1993.
-
KUNIO TAKAHASHI.
(An algorithm for determination of the hot-pressing parameters on long-fiber-reinforced metal-matrix composites forming),
Proceedings of Seminar on Joining of advanced materials,
pp. 198-205,
1993.
-
KUNIO TAKAHASHI.
A study about atomic interaction at the interfaces of transient metal/ceramics,
Transactions of the Japan Welding Society,
Vol. 24,
No. 2,
pp. 156-159,
1993.
-
KUNIO TAKAHASHI.
Auger analysis on atomic interaction across metal-ceramic intreface,
Transactions of the Japan Welding Society,
Vol. 24,
No. 1,
pp. 78-86,
1993.
-
KUNIO TAKAHASHI.
A simple formula for surface energy by a shifted step-potential approximation,
Physical Review B,
Vol. 48,
No. 8,
pp. 5689-5691,
1993.
-
KUNIO TAKAHASHI.
A valence Auger analysis across the interface between nitride-ceramics and deposited metals,
Vacuum,
Vol. 44,
No. 8,
pp. 791-796,
1993.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
A study about atomic interactions at the interfaces of transient-metal/ceramics,
Quarterly journal of Japan Welding Society,
Vol. 11,
No. 1,
pp. 126-130,
1993.
-
Yasuo TAKAHASHI,
K. INOUE,
Y. TSUNEMATSU,
Kimiyuki. NISHIGUCHI,
Kunio TAKAHASHI.
Interfacial reaction of Ag/Ti thin films on a silica substrate,
Vacuum,
Vol. 45,
pp. 791-796,
1993.
-
恩澤忠男,
鈴村暁男,
山西秀策,
横山大,
KUNIO TAKAHASHI.
Solid state bonding and brazing of an intermetallic compound TiAl,
溶接学会全国大会講演概要,
Vol. 50,
pp. 166-167,
1992.
-
西口公之,
松山欽一,
窪田覚,
KUNIO TAKAHASHI.
A study of blowhole formation mechanizum in MIG arc welding of steel sheets ( Report 1 ) - Formation feature of blowholes ,
溶接学会全国大会講演概要,
Vol. 51,
pp. 72-73,
1992.
-
KUNIO TAKAHASHI.
Valence Auger analysis of the annealing effect of atomic interaction at Ti/sappire, Ti/silica, and Ag/silica interfaces,
Thin Solid Films,
Vol. 221,
pp. 98-103,
1992.
-
KUNIO TAKAHASHI.
A valence Auger analysis across the annealed interface between a deposited titanium film and sapphire,
Thin Solid Films,
Vol. 216,
pp. 239-243,
1992.
-
KUNIO TAKAHASHI.
Adhesion force at the gold/silicon and gold/silicon-oxide contacts,
溶接学会全国大会講演概要,
Vol. 51,
pp. 190-191,
1992.
-
西口公之,
高橋康夫,
上妻伸二.
Auger analysis across the interface between metals and nitrides ,
溶接学会全国大会講演概要,
Vol. 48,
pp. 52-53,
1991.
-
KUNIO TAKAHASHI.
Fabrication of Ti-Al intermetallic compounds-matrix composites reinforced with SiC(CVD) fibers ,
溶接学会全国大会講演概要,
Vol. 49,
pp. 404-405,
1991.
-
KUNIO TAKAHASHI.
The behavior of active metals at the brazing interface of diamond ,
溶接学会全国大会講演概要,
Vol. 49,
pp. 380-381,
1991.
-
KUNIO TAKAHASHI.
Auger analysis of the interface between Si02 substrate and Ag thin film --- The effect of Ti of chemical bonding across the interface --- ,
溶接学会全国大会講演概要,
Vol. 49,
pp. 142-143,
1991.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Application of Auger analysis to titanium/silica interface,
Quarterly Journal of The Japan Welding Society,
Vol. 9,
No. 4,
pp. 537-544,
1991.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Auger analysis of the interface between 3d-metals and silica,
Quarterly Journal of The Japan Welding Society,
Vol. 9,
No. 4,
pp. 544-549,
1991.
-
Yasuo TAKAHASHI,
Kunio TAKAHASHI,
Kimiyuki NISHIGUCHI.
A Numerical analysis of void shrinkage processes controlled by coupled surface and interface diflusion,
Acta Metallurgica,
Vol. 39,
No. 12,
pp. 3199-3216,
1991.
-
西口公之,
高橋康夫.
Numerical study on the interdiffusion-layer across the metal-ceramic interface by the free electron thoory ,
溶接学会全国大会講演概要,
Vol. 46,
pp. 58-59,
1990.
-
KUNIO TAKAHASHI.
The valence Auger analysis across the interface between Cr film and Pure SiO2 Glass,
Proceedings of the 5th international Symposium of the Japan Welding Soc.,
Vol. 1,
No. II-12,
pp. 315-320,
1990.
-
西口公之,
高橋康夫,
石井宏之.
The penetration effect of free electron on the unstability of the metal-ceramics interface,
溶接学会全国大会講演概要,
Vol. 45,
pp. 216-217,
1989.
-
KUNIO TAKAHASHI.
Auger analysis of the Metal/ceramics interface.-On Ti/Al2O3 interface-,
溶接学会全国大会講演概要,
Vol. 45,
pp. 214-215,
1989.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Transient Behaviour of Interface-Diffusion in Solid State bonding,
Quarterly Journal of The Japan Welding Society,
Vol. 4,
No. 3,
pp. 586-592,
1986.
Book
-
NOBUAKI OTSUKI,
Kiyohiko Nakasaki,
川瀬進,
Tsuyoshi Saitou,
KUNIO TAKAHASHI,
sachio hirose.
工業材料4 エンジニアリングからバイオテクノロジーまで,
工業材料4 エンジニアリングからバイオテクノロジーまで,
朝倉書店,
Sept. 2013.
-
KUNIO TAKAHASHI,
野村博一,
佐藤正晴.
アジアへ広がるJWESの溶接要員認証制度,
溶接技術,
産報出版,
Vol. 55,
No. 9,
pp. 57-62,
Aug. 2007.
-
Kunio Takahashi.
Handbook of Theoretical and Computational Nanoscience Embedded Atom Method: Theory, Development, and Application,
American Scientific Publishers,
Oct. 2005.
-
Ryoji MIZUNO,
KunioTAKAHASHI,
Tadao ONZAWA.
Influence of the Ion Irradiation of the Adhesion Between Solids in an Ultra High Vacuum Auger Electron Spectroscopy Apparatus,
2nd Symposium Microjoining and Assembly Technology in Electronics(Mate'96),
2nd Symposium Microjoining and Assembly Technology in Electronics(Mate'96),
pp. 143-146,
1996.
-
KUNIO TAKAHASHI.
Adhesion of elastic continuum and criterion for perfect contact,
Proceeding of 8th Japan Institute Metals International Symposium,
Proceeding of 8th Japan Institute Metals International Symposium,
pp. 173-176,
1996.
-
Ryoji MIZUNO,
Kunio TAKAHASHI,
Tadao ONZAWA.
Investigation of Adhesion Behavior by Measurement System Constructed in Auger Electron Spectroscope,
proceedings of The 6th International Welding Symposium of the Japan Welding Society,
proceedings of The 6th International Welding Symposium of the Japan Welding Society,
Vol. 2,
No. B-3,
pp. 707-710,
1996.
-
KUNIO TAKAHASHI.
Optimization of the Hot Pressing Pavameters to Tabricate the Fiber Reinforced Matevial (FRM),
Proceeding of the 1995 Join ASME/JSME Pressure Vessel and Piping Conterence,
Proceeding of the 1995 Join ASME/JSME Pressure Vessel and Piping Conterence,
Vol. 302,
pp. 277,
1995.
-
KUNIO TAKAHASHI.
CVD製膜の基礎と膜形成における計算機シミュレーション,
-マイクロ接合研究委員会・「薄膜界面形成」研究会 研究会報告-,
-マイクロ接合研究委員会・「薄膜界面形成」研究会 研究会報告-,
1994.
-
KUNIO TAKAHASHI.
Review of Welding in Japan : diffusion bonding, hot pressing and cold pressing,
溶接学会誌,
溶接学会誌,
Vol. 63,
No. 5,
pp. 354-357,
1994.
-
KUNIO TAKAHASHI.
The heatless and pressureless bonding as the low-energy precise method,
Proceedings of The Eleventh Space Utilization Symposium,
Proceedings of The Eleventh Space Utilization Symposium,
pp. 242-245,
1994.
-
KUNIO TAKAHASHI.
Instrument for measurement of the adhesion force in UHV surface analysis apparatus,
Proceeding of the Pre-Assembly Symposium of 47th Annual Assembly of IIW,
Proceeding of the Pre-Assembly Symposium of 47th Annual Assembly of IIW,
Vol. 1-2,
pp. 348-353,
1994.
-
KUNIO TAKAHASHI.
Visual Dictionary of industrial materials : ESCA, XPS(Auger)and STM(AFM),
The Nikkan Kogyo Shinbun, LTD.,
The Nikkan Kogyo Shinbun, LTD.,
1993.
International Conference (Reviewed)
-
Kunio TAKAHASHI.
A Method to Evaluate Liquid Surface Tension from a Shape of Sessile Drop in Gravity,
IIW2022 International Conference on Welding and Joining,
Proceedings of IIW2022 International Conference on Welding and Joining,
Japan Institute of welding,
pp. 328-331,
July 2022.
-
Kazuki Wakabayashi,
Kento Kawano,
KUNIO TAKAHASHI,
Shigeki SAITO.
A 3D-printed-Layered Module of Compliant Electrostatic Gripper Consisting of Elastically Deformable Bipolar Micro-Probes,
2017 MRS Fall Meeting,
Nov. 2017.
-
K. Wakabayashi,
P. Hemthavy,
S.Saito,
K. Takahashi.
Time to melting and energy consumption of resistance spot welding,
The 5th International Education Forum on Environment and Energy Science,
2016.
-
K. Wakabayashi,
P. Hemthavy,
Shigeki SAITO,
KUNIO TAKAHASHI.
Temperature distribution change by constriction of electric current for resistance welding,
10th International Conference on Trends in Welding Research & 9th International Welding Symposium of JWS (9WS),
2016.
-
K. Wakabayashi,
P. Hemthavy,
S.Saito,
K. Takahashi.
Theoretical Analysis of Transient State of Temperature Distribution by Point Contact Current,
The 3rd International Education Forum on Environment and Energy Science,
2014.
-
kazuteru Kawamura,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
Applicable Range in Object Size for Grasp-less Manipulation using Capillary and Gravitational Forces,
ASME2013 Mechanical Engineering Congress,
Nov. 2013.
-
Pasomphone Hemthavy,
Takehiko Yazaki,
Boqing Wang,
Kunio Takahashi.
Effect of shape of elastic beam hair on its adhesion with rough surfaces,
International Symposium on Interfacial Joining and Surface Technology (IJST2013),
Proceedings of IJST2013,
Kuroki Publishing Co.,
pp. 27-28,
Nov. 2013.
Official location
-
Dooyoung Baek,
Pasomphone Hemthavy,
Kunio Takahashi.
Analysis of elastic contact between a silica glass lens and a silicone rubber,
International Symposium on Interfacial Joining and Surface Technology (IJST2013),
Proceedings of IJST2013,
Kuroki Publishing Co.,
pp. 93-94,
Nov. 2013.
Official location
-
Kazuhito Emura,
Pasomphone Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Criterion of detachment for grip-and-release devices with slanted multi-beam structure using Ti-Ni wire,
International Symposium on Interfacial Joining and Surface Technology (IJST2013),
Proceedings of IJST2013,
Kuroki Publishing Co.,
pp. 175-176,
Nov. 2013.
Official location
-
Kazuki Wakabayashi,
Pasomphone Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Density distribution of point contact current,
International Symposium on Interfacial Joining and Surface Technology (IJST2013),
Proceedings of IJST2013,
Kuroki Publishing Co.,
pp. 105-106,
Nov. 2013.
Official location
-
K. Wakabayashi,
P. Hemthavy,
S.Saito,
K. Takahashi.
Temperature Distribution Change by Point Contact Current,
The 2nd International Education Forum on Environment and Energy Science,
2013.
-
Vichiensamuth, T.,
Pimsarn, M.,
KUNIO TAKAHASHI,
Tantanawat, T..
A simplified model of a reinforced square hollow section (SHS) T-joint for stress evaluation in bus superstructures,
IOP Conference Series: Materials Science and Engineering,
Vol. 46,
No. 1,
2013.
-
Daizo Nakabayashi,
Kenji SAWAI,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
Electrostatic Deposition of a Micro Solder Particle Using a Single Probe by Applying a Single Rectangular Pulse,
American Vacuum Society 2012,
Oct. 2012.
-
Y. Honda,
M. Tanaka,
Y. Sekiguchi,
P. Hemthavy,
K. Takahashi.
Optimum Duty Ratio of Boost Switching Regulator for Charging Tiny Electric Energy to Capacitor,
International Symposium on Materials Science and Innovation for Sustainable Society --- Eco-Materials and Eco-Innovation for Global Sustainability --- The 21st Iketani Conference 2011,
Proceeding of ECO-MATES 2011,
Joining and Welding Research Institute, Osaka University,
Volume 1,
pp. 85-86,
Nov. 2011.
-
Kenji SAWAI,
wataru takarada,
TAKESHI KIKUTANI,
KUNIO TAKAHASHI,
Shigeki SAITO.
Electrostatic Chuck Consisting of Electrostatic Inductive Polymer Fibers for Handling of Curved Surface,
MRS 2011 Fall Meeting,
Abstracts,
V17.41,
Nov. 2011.
-
Y. Sekiguchi,
P. Hemthavy,
S. Saito,
K. Takahashi.
Possibility of Reversible Adhesive Joining Using an Elastic Body with Variable Elastic Modulus,
ECO-MATES 2011,
Proceeding of ECO-MATES 2011,
Volume 1,
pp. 177-178,
Nov. 2011.
Official location
-
M. Tanaka,
S. Huang,
P. Hemthavy,
K. Takahashi.
Optimization of Control Parameters of Boost Converter for Storing Tiny Electric Energy with High Efficiency,
International Symposium on Materials Science and Innovation for Sustainable Society --- Eco-Materials and Eco-Innovation for Global Sustainability --- The 21st Iketani Conference 2011,
Proceeding of ECO-MATES 2011,
Joining and Welding Research Institute, Osaka University,
Volume 1,
pp. 83-84,
Nov. 2011.
-
Pasomphone Hemthavy,
Mohd Fahmi Bin Samir,
Shigeki Saito,
Kunio Takahashi.
Time Dependence of Adhesion Contact between a Rigid Sphere and an Elastic Body,
International Symposium on Materials Science and Innovation for Sustainable Society --- Eco-Materials and Eco-Innovation for Global Sustainability --- The 21st Iketani Conference 2011,
Proceeding of ECO-MATES 2011,
Joining and Welding Research Institute, Osaka University,
Volume 1,
pp. 179-180,
Nov. 2011.
-
Y.Sekiguchi,
L.Lei,
P.Hemthavy,
K.Takahashi.
Mechanisms for adhesive grip-and-release using material with variable elasic modulus,
Proceedings of The 3rd International Conference on Advanced Computational Engineering and Experimenting,
p. 75,
June 2009.
-
Yasuhiro Iida,
KUNIO TAKAHASHI.
微小誘電体表面に分布する電荷が静電マニピュレーションに及ぼす影響,
14th symposium on "Microjoining and Assembly Technology in Electronics",
pp. 277-282,
Feb. 2008.
-
Kenichi J. Obata,
Shin-ichi Masunari,
Shigeki Saito,
Kunio Takahashi.
CONTROLLING DROPLET VAPORIZATION/CONDENSATION FOR LIQUID SUPPLY OF CAPILLARY-BASED MICROMANIPULATION,
ASME IDETC/CIE 2007,
Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2007,
American Society of Mechanical Engineering,
p. DETC2007-35284,
Sept. 2007.
-
Shigeki Saito,
Masaki Sonoda,
Toshihiro Ochiai,
Min Han,
Kunio Takahashi.
Electrostatic Micromanipulation of a Conductive/Dielectric Particle by a Single Probe,
Proceedings of IEEE NANO 2007,
pp. 733-736,
Aug. 2007.
-
Kento Tokumaru,
Kunio Takahashi,
Shigeki Saito,
Gchen Yin.
A procedure of determining parameters to expand applicability of modified embedded atom method to non-bulk systems,
MRS Fall Meeting,
Proceedings of 2006 MRS Fall Meeting,
Material Research Society,
Vol. 978,
pp. 243-248,
Nov. 2006.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Auger-analysis of valence electronic structure through the metal-ceramics interface,
溶接学会全国大会講演概要,
Vol. 43,
pp. 106-107,
1988.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Numerical analysis of bonding process controlled by diffusion mechanism along surface and bonded interface -fundamental study of solid state bonding-,
溶接学会全国大会講演概要,
Vol. 40,
pp. 150-151,
1987.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Transient behaviour in the solid state bonding and the enhancement effect on the bonding process (Part 1),
溶接学会全国大会講演概要,
Vol. 37,
pp. 50-51,
1985.
-
西口公之,
高橋康夫,
KUNIO TAKAHASHI.
Transient behaviour in the solid state bonding and the enhancement effect on the bonding process (Part 2),
溶接学会全国大会講演概要,
Vol. 37,
pp. 52-53,
1985.
Domestic Conference (Reviewed)
-
Kazuki WAKABAYASHI,
Kunio TAKAHASHI,
Pasomphone HEMTHAVY.
Temperature Distribution Change by Point Contact Current,
18th Symposium on "Microjoining and Assembly Technology in Electronics",
18th Symposium on "Microjoining and Assembly Technology in Electronics",
JAPAN WELDING SOCIETY,
mate2012,
pp. 359-364,
Jan. 2012.
-
Kunio TAKAHASHI.
Mechanism of reversible joint or grip-and-release by adhesion phenomenon using nano- and/or micro-structure,
16th Symposium on "Microjoining and Assembly Technology in Electronics" (mate 2010),
Proceedings of the 16th Symposium on Microjoining and Assembly Technology in Electronics (mate2010),
Japan Welding Society,
Vol. 16,
pp. 119-124,
Feb. 2010.
Official location
International Conference (Not reviewed / Unknown)
-
Dooyoung Baek,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Strain energy release rate and work of adhesion in adhesive elastic contact,
The 6th Asian Conference on Adhesion (ACA2016),
Abstract of the 6th Asian Conference on Adhesion,
The Adhesion Society of Japan,
pp. 58-59,
June 2016.
Official location
-
Dooyoung Baek,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Non-equilibrium assumption and stiffness of measurement system in the investigation of adhesive elastic contact,
The 5th World Congress on Adhesion and Related Phenomenon (WCARP-V),
5th world congress on adhesion and related phenomena abstracts: WCARP-V Adhesion,
The Adhesion Society of Japan,
pp. 111,
Sept. 2014.
Official location
-
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Effect of elastic modulus on adhesion contact between an elastic body and a rigid body with surface roughness and a defect,
EURADH 2012 9th European Adhesion Conference,
Sept. 2012.
Official location
-
K. Emura,
P. Hemthavy,
K. Takahashi.
Experimental study on grip-release mechanism of slanted multi-beam structure using Ti-Ni wire,
The 4th Multidisciplinary International Student Workshop (MISW2012),
Proceedings of the 4th Multidisciplinary International Student Workshop,
Graduate School of Engineering, Tokyo Institute of Technology,
pp. 91,
Aug. 2012.
-
Y. Honda,
P. Hemthavy,
Kunio Takahashi.
Optimum Duty Ratio of Boost Switching Regulator for Charging Tiny Electric Energy,
The 4th Multidisciplinary International Student Workshop (MISW2012),
Proceedings of the 4th Multidisciplinary International Student Workshop,
Graduate School of Engineering, Tokyo Institute of Technology,
pp. 90,
Aug. 2012.
-
Y. Sekiguchi,
P. Hemthavy,
K. Takahashi.
Manipulation by Adhesion Force between Elastic body and Rigid Object,
The 5th AOTULE International Postgraduate Students Conference on Engineering,
Proceedings of the 5th AOTULE International Postgraduate Student Conference on Engineering,
pp. 151-153,
Nov. 2010.
Official location
-
KUNIO TAKAHASHI.
固体間凝着現象の理解と把持・接合技術への応用,
日本テクノセンターセミナー資料,
pp. 1-95,
Mar. 2010.
-
Kunio Takahashi,
Hirokazu Nomura,
Masaharu Sato.
Certification Systems Of Welding Personnel In Japan - Certification activity in Asian countries -,
Proceedings of the 6th International Materials Technology Conf. & Exhibition,
pp. 24-27,
Aug. 2008.
-
KUNIO TAKAHASHI.
Understanding of adhesion phenomena and its application to grip-and-release devices,
the 1st international IEEE workshop on Low Temperature Bonding for 3D Integration,
Proceedings of the 1st international IEEE workshop on Low Temperature Bonding for 3D Integration,
pp. 115-160,
July 2008.
-
Kenichi J. Obata,
Shin-ichi Masunari,
Shigeki Saito,
Kunio Takahashi.
Expansion of capillary force range by probe-tip curvature,
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics,
pp. 325-334,
2007.
-
R. R. A Sriwijaya,
K. Takahashi,
K. Jatmiko.
The effect of the work of adhesion on the contact mechanics of a rigid wavy surface on a semi-infinite elastic body,
AUN/SEED-Net Field-wise Seminar on Mechanical and Aeronautical Engineering,
Proceedings of AUN/SEED-Net Field-wise Seminar on Mechanical and Aeronautical Engineering,
pp. 80-89,
2007.
-
R. R. A Sriwijaya,
K. Takahashi,
K. Jatmiko.
Analytical solution of the adhesion contact for a rigid sinusoidal surface on a semi-infinite elastic body,
Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics,
Proceedings of Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII,
pp. 145-154,
2007.
-
Kunio Takahashi.
Effect of surface roughness on adhesion of multi-hair structure,
7th International Conference CONTCT/SURFACE 2005,
proceeding of 7th International Conference CONTCT/SURFACE 2005,
pp. 141-150,
Sept. 2005.
-
Kunio TAKAHASHI.
Strategy and progress to establish a micro-assembly technology archive considering the mechanisms of joining- and manipulating- processes,
The 1st KWS-JWS Joint Symposium of Young Researchers,
Korean Welding Society,
Vol. 1,
June 2005.
-
K. Takahashi,
S. Saito,
Kenichi J. Obata.
Manipulation Mechanisms for Micro-Joining and Assembly,
IMM-SIRIM-AWF International Welding Seminar,
proceeding of IMM-SIRIM-AWF International Welding Seminar,
Vol. 1,
Mar. 2005.
-
Kenichi J. Obata,
S. Saito,
K. Takahashi.
Evaluation of manipulation probes for expanding the range of capillary force,
Nanotechnology Conference and Trade Show,
Tec. Proc. of the 2005 Nanotechnology Conference and Trade Show,
Vol. 2,
pp. 430-433,
2005.
Domestic Conference (Not reviewed / Unknown)
-
KUNIO TAKAHASHI.
Sessile drop を用いた接触角と表面張力の測定方法と適用可能性確認方法ー精度を向上させた接触角測定方法,液体表面張力の同時測定方法,θ/2 法,および,大体積近似法ー,
溶接学会 第119回界面接合研究委員会,
第119回界面接合研究委員会資料,
Jan. 2022.
-
KUNIO TAKAHASHI.
平面上液滴による表面張力の測定方法について,
第15回マイクロソルダリング技術 教育・認証フェスタ ~ソルダリング実装技術の最新動向~,
第15回マイクロソルダリング技術 教育・認証フェスタ ~ソルダリング実装技術の最新動向~講演資料,
pp. 60-78,
Oct. 2021.
-
KUNIO TAKAHASHI.
重力下の平面上液滴より表面張力を決定する非反復手法,
溶接学会 第134回マイクロ接合研究委員会,
第134回マイクロ接合研究委員会 配布資料,
July 2021.
-
KUNIO TAKAHASHI.
重力下の平面上液滴(Sessile drop)形状から表面張力と接触角を同時決定する手法,
日本溶接協会 先端材料接合委員会,
先端材料接合委員会資料,
Mar. 2021.
-
Tomohiro RYO,
Yuki TAOKA,
Pasomuphone HEMTHAVY,
Kunio TAKAHASHI,
Shigeki SAITO.
Development of manufacturing method of micro-hair electrostatic cyuck by water jet processing of composite material,
2020年度精密工学会春季大会学術講演会,
2020年度精密工学会春季大会学術講演会講演論文集,
p. 499-500,
Mar. 2020.
-
Taihei WATANABE,
Yuki TAOKA,
Pasomuphone HEMTHAVY,
Kunio TAKAHASHI,
Shigeki SAITO.
Reveal Adhesional Rolling Behavior through Rolling Resistance Measurement and Contact Observation,
2020年度精密工学会春季大会学術講演会,
2020年度精密工学会春季大会学術講演会講演論文集,
p. 495*496,
Mar. 2020.
-
Kohei KAWABATA,
Yuki TAOKA,
Pasomuphone HEMTHAVY,
Kunio TAKAHASHI,
Shigeki SAITO.
Processing method for improving performance of bipolar electrostatic chuck with micro hairy strucrure,
2020年度精密工学会春季大会学術講演会,
2020年度精密工学会春季大会学術講演会講演論文集,
p. 501-502,
Mar. 2020.
-
kenta KUDO,
Yuki TAOKA,
Pasomuphone HEMTHAVY,
Kunio TAKAHASHI,
Shigeki SAITO.
Development of the bipolar electrostatic tool for handling cylindrical object,
2020年度精密工学会春季大会学術講演会,
2020年度精密工学会春季大会学術講演会論文集,
p. 497-498,
Mar. 2020.
-
Naoki Masumoto,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
物体表面の濡れ性を利用した液滴量制御による液架橋マニピュレーションの可能性,
2019年度精密工学会春季大会,
2019年度精密工学会春季大会講演論文集,
公益社団法人精密工学会,
p. 30,
Mar. 2019.
-
Terumichi Hayashi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
集合梁構造により表面柔軟性を有する双極型静電吸着デザイスの大面積化,
2019年度精密工学会春季大会,
2019年度精密工学会春季大会講演論文集,
公益社団法人精密工学会,
p. 30,
Mar. 2019.
-
Kohei Kawabata,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
微細毛構造を有するシリコン双極型静電チャックの接触面の平滑さと微細毛長が静電力に与える影響,
日本機械学会第9回「マイクロ・ナノ工学シンポジウム」,
日本機械学会第9回マイクロ・ナノシンポジウム講演論文集,
Oct. 2018.
-
Soitiro Kudou,
Kazuki Wakabayashi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
集合梁構造を持つ双極型静電吸着装置による対象物離脱のための手先軌道の実験的検討,
2018年度精密工学会春季大会,
精密工学会学術講演会講演論文集,
公益社団法人精密工学会,
p. 51-52,
Mar. 2018.
-
Takahiro Kodama,
Kazuki Wakabayashi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
表面に凹凸形状を有する誘電体の把持・離脱を目的とした微細毛構造を持つ双極型静電吸着装置の配列密度に関する実験的検討,
2018年度精密工学会春季大会,
精密工学会学術講演会講演論文集,
公益社団法人精密工学会,
p. 53-54,
Mar. 2018.
-
Mikhail Salioukov,
Yoji Iguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Development of a Multy-Beam Structure by Stacking Comb-Shaped Rubbers,
24rd Symposium on “Microjoining and Assembly Technology in Electronics” Mate2018,
24rd Symposium on “Microjoining and Assembly Technology in Electronics”,
pp. 261-264,
Jan. 2018.
-
Choi Seungman,
Kento Kawano,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
Development of the bipolar electrostatic chuck module having beam assembly microstructure using lithographic technique,
2017年度精密工学会春季大会学術講演会.,
2017年度精密工学会春季大会学術講演会論文集.,
Mar. 2017.
-
Kento Kawano,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
微細毛構造を持つ双極型静電チャックの吸着部平滑化による把持性能向上,
2017年度精密工学会春季大会,
Mar. 2017.
-
Hiroki Ishihara,
Kento Kawano,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
液架橋マニピュレーションにおけるせん断方向の慣性力による離脱手法,
2017年度精密工学会春季大会,
Mar. 2017.
-
Tadayuki Omata,
Kazuki Wakabayashi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Effects of Arc Current and Voltage between Electrodes on Arc Reignition in DC Arc Discharge,
23rd Symposium on “Microjoining and Assembly Technology in Electronics” Mate2017,
23rd Symposium on “Microjoining and Assembly Technology in Electronics”,
Jan. 2017.
-
Yuta Imai,
Kazuki Wakabayashi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Effect of Tangential Force on Adhesion of Side Surface of Elastic Beam,
23rd Symposium on “Microjoining and Assembly Technology in Electronics” Mate2017,
23rd Symposium on “Microjoining and Assembly Technology in Electronics”,
pp. 387-390,
Jan. 2017.
-
Kento Kawano,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
3Dプリンターを用いた微細毛構造を持つ双極型静電チャックモジュールの開発,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
Mar. 2016.
-
Ryo Fujiwara,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
操作対象の表面導電性と凝着力を考慮した微小誘電体の静電マニピュレーション,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
Mar. 2016.
-
Takahiro Kodama,
Ryo Fujiwara,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
振動がイランによる微小液滴配列手法における最適振動曲線の設計,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
Mar. 2016.
-
Jun Katou,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
表面微細構造と微小液滴群による把持・脱離機構のための複数プローブ効果の検証,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
Mar. 2016.
-
Yosuke Tajiri,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
フォトリソグラフィ技術を用いた微細毛構造による双極型静電チャックの開発,
2016年度精密工学会春季大会学術講演会,
2016年度精密工学会春季大会学術講演会講演論文集,
Mar. 2016.
-
kazuki wakabayashi,
ヘムタビーパソムポーン,
Shigeki SAITO,
KUNIO TAKAHASHI.
Size-dependence of current density distribution fir cylinder electrode with point contact,
the National Meeting of JWS(Autumn), 2016,
Preprints of the National Meeting of JWS,
99,
20-21,
2016.
-
Yasuhiko Nara,
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI,
Shigeki SAITO.
大変形を考慮した弾性梁と剛体間の凝着,
2014年度精密工学会春季大会,
2014年度精密工学会春季大会講演論文集,
精密工学会,
No. J13,
pp. 735-736,
Mar. 2014.
-
Kazuteru Kawamura,
PASOMPHONE HEMTHAVY,
wataru takarada,
TAKESHI KIKUTANI,
KUNIO TAKAHASHI,
Shigeki SAITO.
双極型静電誘導ファイバーの配列に際して電極形状が静電力に与える効果,
2014年度精密工学会春季大会学術講演会,
2014年度精密工学会春季大会学術講演会講演論文集,
精密工学会,
No. J14,
pp. 737-738,
Mar. 2014.
-
Hitomi Shirahama,
KUNIO TAKAHASHI,
Shigeki SAITO.
果肉を対象とした液架橋マニピュレーションにおけるプローブ速度および加速度の最適化,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会論文集,
pp. 129-130,
Mar. 2013.
-
Eiji Seo,
KUNIO TAKAHASHI,
Shigeki SAITO.
振動外乱による親疎水塗り分け基板上微小水滴配列手法,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会論文集,
pp. 133-134,
Mar. 2013.
-
Syoichi Nikaido,
KUNIO TAKAHASHI,
Shigeki SAITO.
電気的な同時多極センシングへ向けた柔軟プローブの設計可能性,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会論文集,
pp. 135-136,
Mar. 2013.
-
Daizo Nakabayashi,
KUNIO TAKAHASHI,
Shigeki SAITO.
液架橋力マイクロマニピュレーションにおける凝縮による水滴安定供給のためのプローブ先端形状最適化,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会論文集,
pp. 127-128,
Mar. 2013.
-
Ryousuke Echizen,
KUNIO TAKAHASHI,
Shigeki SAITO.
先端に可変曲率凹面を持つプローブを用いた果肉の液架橋マニピュレーション,
2013年度精密工学会春季大会学術講演会,
2013年度精密工学会春季大会学術講演会論文集,
pp. 131-132,
Mar. 2013.
-
Takehiko YAZAKI,
Yu SEKIGUCHI,
Pasomphone HEMTHAVY,
Kunio TAKAHASHI.
Effect of Shape and Distribution of Material Properties of Beam on Adhesion with Rigid Body Surface,
19th Symposium on "Microjoining and Assembly Technology in Electronics",
19th Symposium on "Microjoining and Assembly Technology in Electronics",
Mate2013,
pp. 297-300,
Jan. 2013.
-
Y. Sekiguchi,
P. Hemthavy,
Shigeki Saito,
Kunio Takahashi.
Peeling of Adhered Elastic Tape,
The 4th Multidisciplinary International Student Workshop (MISW2012),
Proceedings of the 4th Multidisciplinary International Student Workshop,
Graduate School of Engineering, Tokyo Institute of Technology,
p. 89,
Aug. 2012.
-
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Theoretical analysis of peeling force on adhesion of thin film,
接着学会年次大会,
接着学会第50回年次大会講演要旨集,
The Adhesion Society of Japan,
Vol. 50,
pp. 73-74,
June 2012.
Official location
-
Kazuteru Kawamura,
KUNIO TAKAHASHI,
Shigeki SAITO.
Manipulation method using capillary force for developing a manipulator for fuit pulp,
精密工学会2012春季大会,
2012.
-
Keisuke Maezono,
KUNIO TAKAHASHI,
Shigeki SAITO.
The Effect of Cross-sectional Shape of Bipolar-type Electrostatic Inductive Fiber with respect to Attractive Force,
精密工学会2012春季大会,
2012.
-
Kenji SAWAI,
wataru takarada,
TAKESHI KIKUTANI,
KUNIO TAKAHASHI,
Shigeki SAITO.
An Electrostatic Chuck Consisting of Electrostatic Inductive Fibers for Curved Surface,
2011年度精密工学会春季大会,
2011年度精密工学会春季大会論文集,
pp.877-878,
Mar. 2011.
-
Yasuhiko Nara,
KUNIO TAKAHASHI,
Shigeki SAITO.
Mechanical manipulation of a conductive micro-particle using a trajectory-controlled single probe,
2011年度精密工学会春季大会,
2011年度精密工学会春季大会論文集,
pp.881-882,
Mar. 2011.
-
Daizo Nakabayashi,
Kenji SAWAI,
KUNIO TAKAHASHI,
Shigeki SAITO.
Electrostatic manipulation of a micro-conductive particle with short particle-plate distance,
2011年度精密工学会春季大会,
2011年度精密工学会春季大会論文集,
pp.879-880,
Mar. 2011.
-
Yu Sekiguchi,
PASOMPHONE HEMTHAVY,
Shigeki SAITO,
KUNIO TAKAHASHI.
Effect of Defects on the Surface of a Rigid Body in Adhesion Contact with a Semi-infinite Elastic Body,
17th Symposium on "Microjoining and Assembly Technology in Electronics",
17th Symposium on "Microjoining and Assembly Technology in Electronics",
Microjoining Commission (JWS),
Vol. 17,
pp. 323-326,
Feb. 2011.
Official location
-
T.Otake,
K. Takahashi.
Enegetical consideration of the effect of a snusoidal surface roughness on the pin-on-disk contact process,
Proceedings of 2nd Multidisciplinary International Student Workshop in Tokyo Tech 2010,
p. 83,
Aug. 2010.
-
S. Huang,
P. Hemthavy,
K. Takahashi.
Design of Switching Regulator in Storage of Tiny Electric Energy,
Proceedings of 2nd Multidisciplinary International Student Workshop in Tokyo Tech 2010,
p. 64,
Aug. 2010.
-
M. Tanaka,
K. Takahashi,
P. Hemthavy.
Charge efficiency for storage of tiny energy with capacitor,
Proceedings of 2nd Multidisciplinary International Student Workshop in Tokyo Tech 2010,
p. 42,
Aug. 2010.
Official location
-
Y. Sekiguchi,
P. Hemthavy,
K. Takahashi.
Manipulation by Adhesion Force between Elastic Beam and Rigid Object,
Proceedings of 2nd Multidisciplinary International Student Workshop in Tokyo Tech 2010,
p. 37,
Aug. 2010.
Official location
-
Atsushi Yamashima,
KUNIO TAKAHASHI,
Shigeki SAITO.
Electrostatic manipulation of a dielectric microparticle by a single probe under Scanning Electron microscope,
2010年度精密工学会春季大会,
2010年度精密工学会春季大会論文集,
pp.629-630,
Mar. 2010.
-
Ryo FUJIWARA,
Atsushi Yamashima,
KUNIO TAKAHASHI,
Shigeki SAITO.
Improving Reliability in Electrostatic Manipulation of a Dielectric Micro-particle Considering Surface Conductivity,
2010年度精密工学会春季ん大会論文集,
pp.641-642,
Mar. 2010.
-
Hitomi Shirahama,
KUNIO TAKAHASHI,
Shigeki SAITO.
Design of a biomimetic gecko adhenshon device for performance improvement,
2010年度精密工学会春季大会,
2010年度精密工学会春季大会論文集,
pp.643-644,
Mar. 2010.
-
Miaomiao WANG,
Yu SEKIGUCHI,
Kunio TAKAHASHI,
Shigeki SAITO,
Pasomphone HEMTHAVY.
Experiment of A Prototype of Quick Grip-release Mechanism Using Multi-beam Structure,
16th Symposium on "Microjoining and Assembly Technology in Electronics" (mate 2010),
Proceedings of the 16th Symposium on Microjoining and Assembly Technology in Electronics (mate2010),
Japan Welding Society,
Vol. 16,
pp. 435-438,
Feb. 2010.
Official location
-
Kunio TAKAHASHI.
自然に学ぶ(2):グリップ&リリースのメカニズム,
nano&nano新機能性材料展2010粘着テクニカルセッション,
nano&nano新機能性材料展2010粘着テクニカルセッションnano&nano新機能性材料展2010粘着テクニカルセッション,
加工技術研究会,
pp. 58-86,
Feb. 2010.
-
KUNIO TAKAHASHI,
佐藤正晴,
野村博一.
ISOの問題とアジア産業界がそれに及ぼす影響,
国際開発学会第20回全国大会,
Proceedings of the 20th Annual Conference The Japan Society for International Development,
pp. 172-173,
Nov. 2009.
-
Miaomiao WANG,
Yu SEKIGUCHI,
Kunio TAKAHASHI,
Pasomphone HEMTHAVY.
Design of quick grip-release mechanism using multi-beam structure,
national meeting of J.W.S.,
Preprints of the national meeting of J.W.S.,
Japan Welding Society,
Vol. 85,
pp. 184-185,
Sept. 2009.
Official location
-
happymaterial,
KUNIO TAKAHASHI,
Shigeki SAITO.
Clarification of the function of gecko-foot inspired adhensional device through the use of a scanning electorn microscope,
2009年度精密工学会春季大会論文集,
pp.763-764,
Mar. 2009.
-
KUNIO TAKAHASHI,
佐藤正晴,
野村博一,
牛尾誠夫,
檜山中.
インドネシアEPAに係る技術協力の為の基礎調査におけるセミナーおよび管理技術者認証,
国際開発学会第9回春季大会,
Proceedings of the 9th Spring Conference The Japan Society for International Development,
pp. 69-72,
July 2008.
-
Masaki Sonoda,
Shigeki SAITO,
KUNIO TAKAHASHI,
落合 俊広.
高速電界制御による微小導体球安定配置のための電圧指令値最適設計,
精密工学会学術講演会講演論文集,
精密工学会,
Vol. 2007S(2007),
pp. 413-414,
Mar. 2007.
-
Fumiaki Soda,
Shigeki SAITO,
KUNIO TAKAHASHI.
相互作用ポテンシャルを考慮した有限要素法を用いたマニピュレーションのための微小物体挙動解析,
精密工学会学術講演会講演論文集,
精密工学会,
Vol. 2007S(2007),
pp. 409-410,
Mar. 2007.
-
落合 俊広,
Shigeki SAITO,
KUNIO TAKAHASHI,
Hiroyuki Meguro.
走査電子顕微鏡下における微小物体操作に向けた操作対象物帯電メカニズムの実験的検証,
精密工学会学術講演会講演論文集,
精密工学会,
Vol. 2007S(2007),
pp. 411-412,
Mar. 2007.
-
増成 伸一,
Kenichi J Obata,
Shigeki SAITO,
KUNIO TAKAHASHI.
液架橋力を利用した微小物体操作のための微小液滴安定化,
精密工学会学術講演会講演論文集,
Vol. 2007S(2007),
pp. 407-408,
Mar. 2007.
-
片岡央,
高橋邦夫,
ヘムタビーパソムポーン.
部落電化に太陽電池とキャパシタを用いる場合のケース・スタディ,
国際開発学会第8回春季大会報告論文集,
国際開発学会,
pp. 251-253,
2007.
-
Kunio TAKAHASHI.
Possibility of Exactly Reversible Joining Process by Bio-mimicking,
12th symposium "Microjoining and Assembly Technology in Electronics" (mate2006),
proc. of 12th symposium "Microjoining and Assembly Technology in Electronics" (mate2006),
pp. 393-396,
2006.
-
朝倉義裕,
前田将克,
高橋康夫,
池田聖,
高橋邦夫,
大谷忠幸.
接合機構領域図に基づく固相圧接過程の検討,
11th symposium Microjoining and Assembly Technology in Electronics (mate2005),
proceding of Mate2005,
pp. 417-420,
Feb. 2005.
-
尾畑賢一,
齋藤滋規,
高橋邦夫.
液架橋力による微小物体操作の適用範囲拡大のための操作プローブの検討,
2005年度精密工学会春季大会,
精密工学会春季大会学術講演会講演論文集,
pp. 1165-1166,
2005.
-
Shigeki SAITO,
宮崎英樹,
佐藤知正,
KUNIO TAKAHASHI.
Analysis of Adhesional Micro-manipulation under SEM,
第19回日本ロボット学会学術講演会講演論文集,
Vol. 19,
pp. 699-700,
2001.
-
Shigeki SAITO,
宮崎英喜,
佐藤知正,
KUNIO TAKAHASHI.
電子顕微鏡下における高精度微小物体Pick&Place手法,
日本機械学会ロボティックス・メカトロニクス講演会講演論文集,
Vol. 00-2,
pp. 2A1-62-079(1) -- 2A1-62-079(2),
2000.
-
Tetsuji Yano,
Megumi Tarumi,
SHUICHI SHIBATA,
masayuki yamane,
KUNIO TAKAHASHI.
オージェスペクトルから見たリン酸塩ガラス中の銀の化学状態,
日本セラミックス協会1997年会,
日本セラミックス協会1997年会講演予稿集,
2C14, 240,
1997.
Other Publication
-
Kunio Takahashi.
High Pressure Technology and Trans-disciplinary Education for Science and Engineering,
Journal of High Pressure Institute of Japan,
HIGH PRESSURE INSTITUTE OF JAPN,
Vol. 61,
No. 4,
pp. 178-183,
Aug. 2023.
-
Kunio Takahashi.
An improved contact angle measurement and simultaneous measurement of liquid surface tension using sessile drop,
JOURNAL OF THE JAPAN WELDING SOCIETY,
Vol. 92,
No. 4,
pp. 246-249,
June 2023.
-
Yuki Taoka,
Kohei Kawabata,
Pasomphone Hemthavy,
Seungman Choi,
Kunio Takahashi,
Shigeki Saito.
Development of Bipolar Electrostatic Chuck with a Beam-Array Assembly Fabricated by Lithography,
International Journal of Automation Technology,
Vol. 16,
No. 4,
pp. 471-477,
July 2022.
-
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Grip-and-Release Mechanism by bio-Mimicry,
Journal of the Japan Society of Mechanical Engineers,
the Japan Society of Mechanical Engineers,
Vol. 112,
No. 1086,
pp. 410-413,
May 2009.
Official location
-
PASOMPHONE HEMTHAVY,
KUNIO TAKAHASHI.
Analyses of the Grip-and-release Mechanism of Organizations and Their Application to Reversible Joint,
JOURNAL OF THE JAPAN WELDING SOCIETY,
JAPAN WELDING SOCIETY,
Vol. 78,
No. 3,
pp. 195-200,
Apr. 2009.
Official location
-
KUNIO TAKAHASHI.
アジア諸国と日本の科学技術の今後,
溶接学会誌,
Vol. 78,
No. 1,
pp. 19-22,
Jan. 2009.
-
高橋邦夫.
アジアがおもしろい,
溶接技術,
Vol. 54,
No. 1,
pp. 64-65,
2006.
-
高橋邦夫.
特集 アジアの中の日本「溶接界の動きと将来像を見据えた活動状況」 -持続可能な技術研究開発と海外技術移転の教育産業化の可能性を溶接界が開く-,
溶接学会誌,
Vol. 74,
No. 1,
pp. 59-61,
Jan. 2005.
-
高橋邦夫.
入門講座,やさしいトライボ表面分析特集(7)「オージェ電子分光法,AES/SAM」,
トライボロジスト,
Vol. 11,
pp. 793-798,
2005.
-
Mitsuo Notomi,
Kunio Takahashi,
Takashi Nakano,
Satoshi MOMOZONO.
Embedded Atom Method および Modified Embedded Atom Method における多原子系エネルギの計算,
Jornal of the Society of Materials Science Japan,
Jornal of the Society of Materials Science Japan,
Vol. 48,
No. 9,
pp. 987-990,
1999.
-
KUNIO TAKAHASHI,
MItsuo NOTOMI,
TAKASHI NAKANO,
Satoshi MOMOZONO.
Calculation by Embedded Atom Method and Modified Embedded Atom Method for the Energy of Multi-atomic Systems,
Jornal of the Society of Materials Science Japan,
Jornal of the Society of Materials Science Japan,
Vol. 48,
No. 9,
pp. 982-986,
1999.
Patent
Degree
[ Save as BibTeX ]
[ Paper, Presentations, Books, Others, Degrees: Save as CSV
]
[ Patents: Save as CSV
]
|