論文

• Yutaro AMEMIYA, Nobuo NAKADA, Satoshi MOROOKA, Makoto KOSAKA, Masaharu KATO. Dynamic Accommodation of Internal Stress and Selection of Crystallographic Orientation Relationship in Pearlite, ISIJ International, Vol. 62, No. 2, 282-290., Feb. 2022.  公式リンク  
  
• 雨宮 雄太郎, 中田 伸生, 諸岡 聡, 小坂 誠, 加藤 雅治. パーライトにおける内部応力の動的緩和と結晶方位関係の選択, 鉄と鋼, Vol. 105, No. 2, pp. 314-323, Feb. 2019.  公式リンク  
  
• Yoji Miyajima, Takahiko Shinohara, Hiroki Adachi, Toshiyuki Fujii, Susumu Onaka, MASAHARU KATO. Change in Electrical Resistivity of Pure Cu Processed by Accumulative Roll Bonding, Materials Transactions, Vol. 59, No. 3, pp. 393-398, Feb. 2018.
• Nobuo Nakada, Masaharu Kato. Internal Stress and Elastic Strain Energy in Pearlite and Their Accommodation by Misfit Dislocations, ISIJ International, Vol. 56, No. 10, pp. 1866-1873, Oct. 2016.  公式リンク  
  
• Yoji Miyajima, Midori Uchiyama, Hiroki Adachi, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato. Effect of Roll-Bonding and Subsequent Annealing on Microstructure Evolution of Accumulative Roll Bonded Pure Copper, MATERIALS TRANSACTIONS, The Japan Institute of Metals and Materials, Vol. 57, No. 9, pp. 1411-1417, June 2016.
• Yoji Miyajima, Satoshi Ookubo, Hiroki Abe, Hiroki Okumura, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Dislocation density of pure copper processed by accumulative roll bonding and equal-channel angular pressing, Materials Characterization, Vol. 104, pp. 101-106, Apr. 2015.  公式リンク  
  
• kazuki kammuri, Masashi Kitamura, TOSHIYUKI FUJII, MASAHARU KATO. Effects of Thickness and Crystallographic Orientation on Fatigue Life of Single-Crystalline Copper Foils, MATERIALS TRANSACTIONS, The Japan Institute of Metals and Materials, Vol. 56, No. 2, pp. 200-205, Dec. 2014.
• Satoshi Ookubo, Hiroki Abe, Yoji Miyajima, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Effects of temperature and strain rate on plastic deformation of ultrafine-grained copper prepared by equal-channel angular pressing, MATERIALS TRANSACTIONS, The Japan Institute of Metals and Materials, Vol. 55, No. 10, pp. 1325-1530, Aug. 2014.
• Yoji Miyajima, Kotaro Iguchi, SUSUMU ONAKA, MASAHARU KATO. Effects of Rolling Reduction and Strength of Composed Layers on Bond Strength of Copper and Aluminium Alloy Clad Sheets Fabricated by Cold Roll Bonding, Advances in Materials Science and Engineering, Hindawi Publishing Corporation, Vol. 2014, ID614821, 11 pages, Apr. 2014.
• MASAHARU KATO. Hall-Petch Relationship and Dislocation Model for Deformation of Ultrafine-Grained and Nanocrystalline Metals, Materials Transactions, Vol. 55, No. 1, pp. 19-24, Jan. 2014.
• Satoshi Ookubo, Yoji Miyajima, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Grain Size Variation during Low Temperature Creep and Tensile Deformation of Ultrafine-Grained Copper, Materials Transactions, Vol. 54, No. 9, pp. 1605-1611, May 2013.
• Yukio Nakanishi, Hiroyuki Tanaka, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Low-Temperature Fatigue Behavior and Development of Dislocation Structure in Alminum Single Crystals with Single-Slip Orientation, Philosophical Magazine, Vol. 93, No. 21, pp. 2756-2768, Apr. 2013.
• Yukito Nakanishi, Yoji MIYAJIMA, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Stability of Fatigued Dislocation Wall Structure in Coarse-Grained and Ultrafine-Grained Aluminum against Monotonic Tensile Deformation, Materials Transactions, Vol. 54, No. 1, pp. 43-49, Jan. 2013.
• Yoji MIYAJIMA, Hiroki Abe, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Effects of Si on mechanical properties and microstructure evolution in ultrafine-grained Cu-Si alloys processed by accumulative roll bonding, Acta Materialia, 2013.
• Tomotaka Miyazawa, Yuta Ozawa, Miyajima, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Morphological and crystallographic Characteristics of Incoherent Octahedral FCC Co Precipitates in a Cu Matrix, MATERIALS TRANSACTIONS, The Japan Institute of Metals, Vol. 53, No. 5, pp. 893-901, Mar. 2012.
• Yoji MIYAJIMA, Takashi ARAGAKI, Hiroki Adachi, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Retardation of Softening of Ultrafine-Grained Copper during Low Temperature Annealing under Uniaxial Tensile Stress, Materials Transactions, Vol. 53, No. 1, pp. 96-100, Jan. 2012.
• Yukito Nakanishi, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Low-Cycle Fatigue of Ultrafine-Grained Aluminum at Low Temperatures, Materials Transactions, Vol. 52, No. 5, pp. 890-894, May 2011.
• Takahiro Kunimine, TOSHIYUKI FUJII, SUSUMU ONAKA, Nobuhiro Tsuji, MASAHARU KATO. Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding, Journal of Materials Science, Vol. 46, pp. 4290-4295, 2011.
• Takahiro Kunimine, Takashi Aragaki, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Inverse Temperature Dependence of Activation Volume in Ultrafine-Grained Copper Processed by Accumulative Roll-Bonding, Journal of Materials Science, Vol. 46, pp. 430294307, 2011.
• Tomotaka Miyazawa, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Shape and Elastic State of Nano-sized Ag Precipitates in a Cu-Ag Single Crystal, Journal of Materials Science, Vol. 46, pp. 4228-4235, 2011.
• Chiharu Kanno, Kenji Aoyagi, TOSHIYUKI FUJII, MASAHARU KATO. Shape evolution of fcc Co-Fe precipitate particles during coarsening in a Cu matrix, Philosophical Magazine Letters, Vol. 90, No. 8, pp. 589-598, Aug. 2010.
• , C. Kanno, T. Fujii, H. Ohtsuka, S. Onaka, M. Kato. Effects of Magnetic Field on Shape Evolution of Fe-Co Particles in a Cu Matrix, Philosophical Magazine, Vol. 89, No. 8, pp. 747-759, Apr. 2009.
• Takahiro Kunimine, Naoki Takata, Nobuhiro Tsuji, Toshiyuki Fujii, Masaharu Kato, Susumu Onaka. Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding, Materials Transactions, The Japan Institute of Metals, Vol. 50, No. 1, pp. 64-69, Jan. 2009.
• Yoji Furukawa, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato. Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing, Materials Transactions, Vol. 50, No. 1, pp. 70-75, Jan. 2009.
• MASAHARU KATO. Thermally activated dislocation depinning at a grain boundary in nanocrystalline and ultrafine-grained materials, Materials Science and Engineering A, Vol. 516, pp. 276-282, 2009.
• M. Kato, T. Fujii, S. Onaka. Dislocation bow-out model for yield stress of ultra-fine grained materials, Materials Transactions, Vol. 49, No. 6, pp. 1278-1283, Jan. 2008.
• H. Sato, T. Murase, T. Fujii, S. Onaka, Y. Watanabe, M. Kato. Formation of a wear-induced layer with nanocrystalline structure in Al-Al3Ti functionally graded material, Acta Materialia, Vol. 56, pp. 4549-4558, 2008.
• 和田 竜二, 小林 法子, 藤居 俊之, 尾中 晋, 加藤 雅治. 弾性相互エネルギーと界面エネルギーが析出物の形状と分布に及ぼす影響：異方性弾性論による２次元解析, 日本金属学会誌, Vol. 71, No. 8, pp. 587-591, Aug. 2007.
• M. Seki, M. Fujimoto, T. Fujii, M. Kato, S. Onaka. Effects of grain-boundary sliding and plastic deformation of grains on the formation of grain-boundary cracks in a double cylindrical bicrystal of a Cu-SiO2 alloy, Materials Transactions, Vol. 48, No. 6, pp. 1412-1416, June 2007.
• S. Onaka, T. Fujii, M. Kato. Elastic strain energy due to misfit strains in a polyhedral precipitate composed of low-index planes, Acta Materialia, Vol. 55, No. 2, pp. 669-673, Jan. 2007.
• 藤居俊之, 尾中晋, 加藤雅治. 純Al単結晶の繰り返し変形に伴う転位組織の形成, 日本金属学会　材料開発のための顕微鏡法と応用写真集, pp. 146, 2006.
• N. KOBAYASHI, S. ONAKA, T. FUJII, M. KATO. Morphological stability of inclusions: two-dimensional analysis with a superelliptic approximation , Materials Science and Engineering A, Vol. 392, No. 1-2, pp. 248-253, 2005.
• N. Kobayashi, Susumu Onaka, Toshiyuki Fujii, Masaharu Kato. Morphological Stability of Inclusions: Two-Dimensional Analysis with a Superelliptic Approximation, Materials Science and Engineering A, Vol. 392, pp. 248-253, 2005.
• Toshiyuki Fujii, Naoki Sawatari, Susumu Onaka, Masaharu Kato. Cyclic Deformation of Pure Aluminum Single Crystals with Double-Slip Orientations, Mater. Sci. Eng. A, Vol. 387-389C, pp. 486-490, Dec. 2004.
• H. Sato, I. Ota, T. Fujii, SUSUMU ONAKA, MASAHARU KATO. Morphological Evolution of Grain-Boundary SiO₂ in Internally Oxidized Cu-Si Bicrystals, Materials Transactions, Vol. 45, No. 3, pp. 818-823, Mar. 2004.
• 藤居俊之, 尾中　晋, 加藤雅治. エネルギー論による転位上優先析出の理解, まてりあ, Vol. 43, No. 11, pp. 925-930, 2004.
• 藤居俊之, 尾中晋, 加藤雅治, 渡邊千尋, 冠和樹, 澤渡直樹, 村山徹. CuおよびAl単結晶の繰り返し変形に伴う転位組織発達過程, まてりあ, Vol. 43, No. 12, pp. 1028, 2004.
• S. Onaka, T. Fujii, M. Kato. Effects of Octahedral to Spherical Precipitate-Shape Transition on Elastic Strain Energy due to Misfit Precipitates in Materials with Cubic Structures, Mechanics of Materials, Vol. 37, pp. 179-187, 2004.
• T. NIHEI, H. G. SUZUKI, M. KATO, J. MA. Effects of Ni addition on the mechanical and electrical properties of Cu-15mass%Cr in-situ composites, Materials Transactions, Vol. 45, No. 1, pp. 75-80, 2004.
• H. MIURA, Y. ITO, T. SAKAI, M. KATO. Cyclic creep and fracture behavior of Cu-SiO2 bicrystals with [011] twist boundaries, Materials Science and Engineering A, Vol. 387-389, pp. 522-524, 2004.
• Toshiyuki Fujii, T. Kato, T. Yamada, Masaharu Kato, H. Nimori, H. Otsuka. Magnetic Field-Induced Martensitic Transformation of Fe-Co Particles in a Cu Matrix, Materials Transactions, Vol. 44, No. 12, pp. 2545-2549, Dec. 2003.
• 松原佳弘, 斉藤英雄, 岡田英之, 藤居俊之, 尾中晋, 加藤雅治. 塑性変形と再結晶におよぼす結晶粒界面方位の影響, 日本金属学会誌, Vol. 67, No. 8, pp. 398-403, Aug. 2003.
• 熊井真次, 若菜剛介, 尾中　晋, 加藤雅治, 佐藤彰一. Cu-15mass%Cr複相合金圧延材におけるヤング率の異方性, 日本金属学会誌, Vol. 67, No. 6, pp. 324-330, 2003.
• Hiromi Miura, Taku Sakai, Masaharu Kato. Temperature Dependence of Cyclic Creep Behavior of a Cu-SiO2 Bicrystals with a [011] 20゜Twist Boundary, Acta Materialia, Vol. 51, pp. 6163-6168, 2003.
• H.Sato, T.Fujii, S.Onaka, M.Kato. Effects of grain-boundary GeO2 particles on intergranular fracture of Cu-GeO2 polycrystals, Journal of Materials Science, Vol. 38, pp. 1689-1693, 2003.
• 松原佳弘, 斎藤英雄, 岡田英之, 藤居俊之, 尾中晋, 加藤雅治. 塑性変形と再結晶に及ぼす結晶粒界面方位の影響, 日本金属学会誌, Vol. 67, No. 8, pp. 398-403, 2003.
• S. Onaka, N. Kobayashi, T. Fujii, M. Kato. Energy analysis with a superspherical shape approximation on the spherical to cubical shape transitions of coherent precipitates in cubic materials, Materials Science and Engineering A, A347, pp. 42-49, 2003.
• S. Onaka, N. Kobayashi, T. Fujii, M. Kato. Energy Analysis with a Superspherical Shape Approximation on the Shape Transitions of Coherent Precipitates in Cubic Materials from Spherical to Cuboidal, Materials Science and Engineering A, Vol. 347, No. 1-2, pp. 42-49, 2003.
• T. Fujii, T. Kato, T. Yamada, M. Kato, S. Nimori, H. Ohtsuka. Magnetic Field-Induced Martensitic Transformation of Fe-Co Particles in a Cu Matirx, Materials Transactions, Vol. 44, No. 12, pp. 2545-2549, 2003.
• H. Sato, T. Fujii, S. Onaka, M. Kato. Effects of Grain-Boundary GeO₂ Particles on Intergranular Fracture of Cu-GeO₂ Polycrystals, Jounal of Materials Science, Vol. 38, pp. 1689-1693, 2003.
• 藤居俊之, 小川仁志, 尾中晋, 加藤雅治. Cu-Cr合金におけるCr粒子の転位上優先析出, 日本金属学会誌, Vol. 66, No. 10, pp. 989-996, Oct. 2002.
• H. Sato, N. Takeoka, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Brittle intergranular fracture of Cu polycrystals containing liquid B₂O₃ particles, Jounal of Materials Science Letters, Vol. 21, No. 8, pp. 617-619, Aug. 2002.
• C. Watanabe, K. Kanmuri, MASAHARU KATO, SUSUMU ONAKA, TOSHIYUKI FUJII. Rearrangement of Fatigue Dislocation Structure in Copper Single Crystals Associated reduction in the Plastic Strain Amplitude, Philosophical Magazine A, Vol. 87, No. 7, pp. 1317-1330, July 2002.
• C. Watanabe, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Low-cycle fatigue and microstructure of Cu-Fe single crystals with a double-slip orientation, International Journal of Fatigue, Vol. 24, No. 7, pp. 795-802, July 2002.
• SUSUMU ONAKA, N. Kobayashi, TOSHIYUKI FUJII, MASAHARU KATO. Simplified Energy Analysis on the Equilibrium Shape of Coherent gamma prime Precipitates in gamma Matrix with a Superspherical Shape Approximation, Intermetallics, Vol. 10, No. 4, pp. 343-346, Apr. 2002.
• H. Sato, T. Murase, T. Fujii, S. Onaka, M. Kato, Y. Watanabe. Formation of the fine Al3Ti fibers near the worn surface of the Al alloy containing large Al3Ti dispersoids: , Proceedings of the 2nd International Conference on Advanced Fiber/Textile Materials, pp. 91, 2002.
• Hiromi Miura, Taku Sakai, Masaharu Kato. Temperature dependence of fatigue-fracture-mode change in Cu-SiO2 alloy, International Journal of Fatigue, Vol. 24, pp. 943-948, 2002.
• 加藤雅治. やさしい材料強度学（第５回）－材料の強さを理解する－, 熱処理, Vol. 42, No. 3, pp. 169-175, 2002.
• C. Watanabe, T. Fujii, S. Onaka, M. Kato. Low-cycle fatigue and microstructure of Cu-Fe single crystals with a double-slip orientation, International Journal of Fatigue, Vol. 24, pp. 795-802, 2002.
• H. Sato, N. Takeoka, T. Fujii, S. Onaka, M. Kato. Brittle Intergranular Fracture of Cu Polycrystals Containing Liquiqd B2O3 Particles, Journal of Materials Science Letters, Vol. 21, pp. 617-619, 2002.
• C. Watanabe, K. Kanmuri, M. Kato, S. Onaka, T. Fujii. Rearrangement of fatigue dislocation structure in copper single crystals associated with reduction in the plastic strain amplitude, Philosophical Magazine A, Vol. 82, No. 7, pp. 1317-1330, 2002.
• 加藤雅治. やさしい材料強度学（第４回）－材料の強さを理解する－, 熱処理, Vol. 42, No. 2, pp. 103-110, 2002.
• 加藤雅治. やさしい材料強度学（第３回）－材料の強さを理解する－, 熱処理, Vol. 42, No. 1, pp. 20-27, 2002.
• S. Onaka, N. Kobayashi, T. Fujii, M. Kato. Simplified Energy Analysis on the Equilibrium Shape of Coherent γ' Precipitates in γ matrix with a superspherical shape approximation, Intermetallics, Vol. 10, pp. 343-346, 2002.
• S. Onaka, N. Kobayashi, M. Kato. Two-dimensional analysis on elastic strain energy due to a uniformly eigenstrained supercircular inclusion in an elastically anisotropic material, Mechanics of Materials, Vol. 34, pp. 117-125, 2002.
• S. Onaka, H. Sato, M. Kato. Elastic states of doughnut-like inclusions with uniform eigenstrains treated by averaged Eshelby tensors, Philosophical Magazine Letters, Vol. 82, No. 1, pp. 1-7, 2002.
• Y. Watanabe, K. Ishii, N. Ishikawa, K. Furuya, M. Kato. In-situ observation of transformation in α-Fe2O3 under hydrogen implantation, Journal of Physics: Condensed Matter, Vol. 14, pp. 13643-13651, 2002.
• 加藤雅治. やさしい材料強度学（第６回）－材料の強さを理解する－, 熱処理, Vol. 42, No. 6, pp. 422-429, 2002.
• 藤居俊之, 小川仁志, 尾中　晋, 加藤雅治. Cu-Cr合金におけるCr粒子の転位上優先析出, 日本金属学会誌, Vol. 66, No. 10, pp. 989-996, 2002.
• 渡邊千尋, 藤居俊之, 加藤雅治. 3003アルミニウム合金における疲労組織の発達と転位組織図の構築, 軽金属, Vol. 51, No. 6, pp. 329-335, June 2001.
• 加藤雅治. やさしい材料強度学（第２回） －　材料の強さを理解する　－, 熱処理, Vol. 41, No. 5, pp. 258-265, 2001.
• K. Matsuda, Y. Watanabe, M. Kato. Growth Kinetics of Al3Ni Primary Crystal Particles in an Al-20mass%Ni Alloy, Transactions of the Materials Research Society of Japan, Vol. 26, No. 1, pp. 279-282, 2001.
• Masaharu Kato, Susumu Onaka, Toshiyuki Fujii. Energy Consideration for Variant Selection in Precipitation on Dislocations, Science and Technology of Advanced Materials, Vol. 2, No. 2, pp. 375-380, 2001.
• 渡邊千尋, 藤居俊之, 加藤雅治. 3003アルミニウム合金における疲労組織の発達と転位組織図の構築, 軽金属, Vol. 51, No. 6, pp. 329-335, 2001.
• H. Yaguchi, H. Mitani, K. Nagano, T. Fujii, M. Kato. Fatigue-damage evaluation in aluminum heat-transfer tubes by measuring dislocation cell-wall thickness, Materials Science and Engineering A, Vol. A315, No. 1, pp. 189-194, 2001.
• 加藤雅治. やさしい材料強度学（第１回） －　材料の強さを理解する　－, 熱処理, Vol. 41, No. 3, pp. 123-130, 2001.
• C. Watanabe, T. Fujii, S. Onaka, M. Kato. Effects of Distributed Fe Particles on Low-Cycle Fatigue Behavior of Cu-Fe Alloy Single Crystals, Materials Science and Engineering A, Vol. A319-321, pp. 506-510, 2001.
• T. Fujii, C. Watanabe, Y. Nomura, N. Tanaka, M. Kato. Microstructural Evolution during Low Cycle Fatigue of a 3003 Aluminum Alloy, Materials Science and Engineering A, Vol. A319-321, pp. 592-596, 2001.
• C. Watanabe, T. Fujii, S. Onaka, M. Kato. Effects of Distributed Fe Particles on Low-Cycle Fatigue Behavior of Cu-Fe Alloy Single Crystals, Materials Science and Engineering A, Vol. 319-321, pp. 506-510, 2001.
• T. Fujii, C. Watanabe, Y. Nomura, N. Tanaka, MASAHARU KATO. Microstructural Evolution during Low Cycle Fatigue of a 3003 Aluminum Alloy, Materials Science and Engineering A, Vol. 319-321, pp. 592-596, 2001.
• H. Yaguchi, H. Mitani, K. Nagano, T. Fujii, MASAHARU KATO. Fatigue-Damage Evaluation in Aluminum Heat-Transfer Tubes by Measuring Dislocation Cell-Wall Thickness, Materials Science and Engineering A, Vol. 315, pp. 189-194, 2001.
• MASAHARU KATO, SUSUMU ONAKA, TOSHIYUKI FUJII. Energy Consideration for Variant Selection in Precipitation on Dislocations, Science and Technology of Advanced Materials, Vol. 2, pp. 375-380, 2001.
• K. Yamashita, C. Watanabe, S. Kumai, M. Kato, A. Sato. Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al-Al3Ti Functionally Graded Material, Materials Transactions, JIM, Vol. 41, No. 10, pp. 1322-1328, 2000.
• 加藤雅治, 尾中晋. 材料の変形と破壊の熱力学, ふぇらむ, Vol. 5, No. 10, pp. 736-741, 2000.
• 加藤雅治. 材料強度関係の教科書を執筆して, まてりあ, Vol. 39, No. 9, pp. 734-737, 2000.
• S. Onaka, M. Kato. Shape Change of Liquid Particles Embedded in a Solid Matrix Caused by Plastic Deformation of a Cu-B2O3 Alloy, Metals and Materials, Vol. 6, No. 1, pp. 7-11, 2000.
• T. Fujii, H. Nakazawa, M. Kato, U. Dahmen. Crystallography and Morphology of Nanosized Cr Particles in a Cu-0.2%Cr Alloy, Acta Materialia, Vol. 48, No. 1, pp. 1033-1045, 2000.
• S. Onaka, T. Fujii, Y. Suzuki, M. Kato. Application of the Average Field Method to the Prediction of Stable Shapes of Coherent Precipitates under Uiaxial Stresses, Materials Science and Engineering A, Vol. A285, No. 1-2, pp. 246-252, 2000.
• S. Onaka, H. Miura, M. Kato. Viscous Deformation of Glass Particles Embedded in a Crystalline Matrix Caused by Plastic Deformation of a Cu-B2O3 Alloy, Journal of Materials Science Letters, Vol. 19, No. 1, pp. 279-281, 2000.
• M. Kato, T. Fujii, S. Onaka. Effects of Shape and Volume Fraction of Second Phase on Stress States in Two-Phase Materials, Materials Science and Engineering A, Vol. A285, No. 1-2, pp. 144-150, 2000.
• H. Miura, T. Sakai, H. Mizukiri, M. Kato. Cyclic Deformation Behavior of Copper Single Crystals with Dispersed SiO2 Particles, Science and Technology of Advanced Materials, Vol. 1, No. 2, pp. 125-129, 2000.
• S. Onaka, T. Fujii, Y. Suzuki, M. Kato. Application os the Average Field Method to the Prediction of Stable Shapes of Coherent Precipitates under Uniaxial Stresses, Materials Science and Engineering A, Vol. 285, No. 1-2, pp. 246-252, 2000.
• M. Kato, T. Fujii, S. Onaka. Effects of Shape and Volume Fraction of Second Phase on Stress States in Two-Phase Materials, Materials Science and Engineering A, Vol. 285, No. 1-2, pp. 144-150, 2000.
• S. Onaka, M. Kato. Effects of Elastic Modulus, Shape and Volume Fraction of an Elastically Inhomogeneous Second Phase on Stress States in a Loaded Composite, Materials Transactions, JIM, Vol. 40, No. 10, pp. 1102-1107, 1999.
• S. Onaka, Y. Suzuki, T. Fujii, M. Kato. Reexamination of Influence of Uniaxial Stress on the Morphology of Coherent Precipitates, Scripta Materialia, Vol. 38, No. 5, pp. 783-788, May 1998.
• 加藤雅治. 国際会議便り：工業材料の微視力学的モデリング：森記念NSF-IMMシンポジウム, 軽金属, Vol. 48, No. 11, pp. 595, 1998.
• S. Onaka, Y. Suzuki, T, Fujii, M. Kato. Reexamination of Influence of Uniaxial Stress on the Morphology of Coherent Precipitates, Scripta Materialia, Vol. 38, No. 5, pp. 783-788, 1998.
• T. Fujii, H. Shintate, H. Yaguchi, H. Mitani, A. Inada, K. Shinkai, S. Kumai, M. Kato. Deformation Characteristics and Microstructure of a Fatigued Polycrystalline 3003 Aluminum Alloy, ISIJ International, Vol. 37, No. 12, pp. 1230, Dec. 1997.
• T. Fujii, H. Shintate, H. Yaguchi, H. Mitani, A. Inada, K. Shinkai, S. Kumai, M. Kato. Low Cycle Fatigue of Cu-Fe Alloy Single Crystals Containing Transformable Fe Precipitates, ISIJ International, Vol. 37, No. 12, pp. 1224-1229, Dec. 1997.
• 尾中晋, 藤居俊之, 加藤雅治. 析出物の形状と方位についての弾性ひずみエネルギー考察, 軽金属, Vol. 47, No. 10, pp. 561-567, Oct. 1997.
• 藤居俊之, 小野亨, 加藤雅治. Cu-Co単結晶からの強磁性体Co粒子の析出・成長に及ぼす外部磁場効果, 日本金属学会誌, Vol. 61, No. 4, pp. 267-273, Apr. 1997.
• M. Kato, N. Honjo, T. Fujii. Low Cycle Fatigue of Cu-Fe Alloy Single Crystals Containing Transformable Fe Precipitates, ISIJ International, Vol. 37, No. 12, pp. 1224-1229, 1997.
• T, Fujii, H. Shintate, H. Yaguchi, H. Mitani, A. Inada, K. Shinkai, S. Kumai, M. Kato. Microstructural Development during Fatigue of a Polycrystalline 3003 Aluminum Alloy, ISIJ International, Vol. 37, No. 12, pp. 1230-1236, 1997.
• 熊井真次, 加藤雅治. 金属材料の低サイクル疲労, ＳＨＭ会誌，エレクトロニクス実装技術協会, Vol. 13, No. 1, 2-10, 1997.
• M, Kato, C. Watanabe, T. Fujii. Effects of Distributed Transformable Iron Particles on the Cyclic Deformation Behavior of Copper Single Crystals, International Union of Materials Research Society, ICA-97 Symposium Abstracts, pp. 740, 1997.
• H. Miura, S. Watanabe, T. Sakai, M. Kato. Intermediate-Temperature Embrittlement of Cu Bicrystals with Dispersed Fe Particles, Interface Science, Vol. 4, No. 1, pp. 329-338, 1997.
• 尾中 晋, 藤居俊之, 加藤雅治. 析出物の形状と方位についての弾性ひずみエネルギー考察, 軽金属, Vol. 47, No. 10, pp. 561-567, 1997.
• S. Ueta, K. Jumonji, K. Kanazawa, M. Kato, A. Sato. Cube Slips and Anomalous Strengthening in Ni3Ge Single Crystals, Philosophical Magazine A, Vol. 75, No. 2, pp. 563-585, 1997.
• 藤居俊之, 小野 亨, 加藤雅治. Cu-Co単結晶からの強磁性体Co粒子の析出・成長に及ぼす外部磁場効果, 日本金属学会誌, Vol. 61, No. 4, pp. 267-273, 1997.
• T. Mori, T. Ishii, M. Kajihara, M. Kato. Determination of the Energies of [001] Symmetric Tilt Boundaries in Cu from the Shape of Boundary SiO2 Particles, Philosophical Magazine Letters, Vol. 75, No. 6, pp. 367-370, 1997.
• T. Fujii, S. Onaka, M. Kato. Shape-Dependent Strain Energy of an Inhomogeneous Coherent Indusion with General Tetragonal Misfit Strains, Scripta Materiaria, Vol. 34, No. 10, pp. 1529, Oct. 1996.
• M. Kato, T. Fujii, S. Onaka. Elastic State and Orientation of Needle-Shaped Inclusions, Acta Materiaria, Vol. 44, No. 3, pp. 1263-1269, Mar. 1996.
• Masaharu Kato, Toshiyuki Fujii, Susumu Onaka. Elastic States of a General Inhomogeneous Ellipsoidal Inclusions, Materials Transactions, JIM, Vol. 37, No. 3, pp. 314-318, Mar. 1996.
• Toshiyuki Fujii, Toshifumi Abe, Shingo Inoue, Masaharu Kato. Epitaxy and Morphology of Deposited α-Fe Films on High-Index Planes of Cu Substrates, Philosophical Magazine A, Vol. 74, No. 2, pp. 317, Feb. 1996.
• M. Kato, T. Fujii, S. Onaka. Elastic Strain Energy of Sphere, Plate and Needle Inclusions, Materials Science and Engineering A, Vol. A211, No. 1, pp. 95-103, 1996.
• Y. Mishima, M. Kato, Y. Kimura, H. Hosoda, S. Miura. Improvement in Room Temperature Ductility of Intermetallic Alloys through Microstructural Control, Intermetallics, Vol. 4 [Supplement No.1], pp. S171-S179, 1996.
• H. Miura, N. Tada, T. Sakai, M. Kato. Correlation between Intermediate-Temperature Embrittlement and Grain-Boundary Energy, Intergranular and Interphase Boundaries in Materials, (IIB 95), Materials Science Forum, 207-209, pp. 649-652, 1996.
• T. Fujii, T. Abe, S. Inoue, M. Kato. Epitaxy of Deposited α-Fe Films on High-Index Cu Substrate Planes, Intergranular and Interphase Boundaries in Materials, (IIB 95), Materials Science Forum, Vol. 207-209, pp. 233-236, 1996.
• R. Monzen, M. Hida, K. Kitagawa, M. Kato. Effects of Element Segregation on Nanometer Grain Boundary Sliding in Copper, Intergranular and Interphase Boundaries in Materials, (IIB 95), Materials Science　Forum, Vol. 207-209, pp. 165-168, 1996.
• H. Miura, T. Sakai, N. Tada, M. Kato. Strain-Rate Effects on Intermediate-Temperature Embrittlement of Cu-SiO2 Bicrystals with [001] Twist Boundaries, Philosophical Magazine A, Vol. 73, No. 4, pp. 871-882, 1996.
• K. Jumonji, S. Ueta, A. Miyahara, M. Kato, A. Sato. Rapid Work Hardening Caused by Cube Cross Slip in Ni3Al Single Crystals, Philosophical Magazine A, Vol. 73, No. 2, pp. 345-364, 1996.
• M. Kato, T. Fujii, S. Onaka. Elastic States of Inhomogeneous Spheroidal Inclusions, Materials Transactions, JIM, Vol. 37, No. 3, pp. 314-318, 1996.
• T. Fujii, S. Onaka, M. Kato. Shape-Dependent Strain Energy of an Inhomogeneous Coherent Inclusion with General Tetragonal Misfit Strains, Scripta Materialia, Vol. 34, No. 10, pp. 1529-1535, 1996.
• M. Kato, T. Fujii, S. Onaka. Elastic State and Orientation of Needle-Shaped Inclusions, Acta Materialia, Vol. 44, No. 3, pp. 1263-1269, 1996.
• 加藤雅治. 弾性変形・塑性変形の基礎, 軽金属, Vol. 46, No. 4, pp. 97-108, 1996.
• 藤居俊之, 山本幸一, 冨田和秀, 加藤雅治, 吉田 隆, 中代雅士. 2.25Cr-1Mo鋼における疲労組織発達過程の温度および歪振幅依存性, 第３４回高温強度シンポジウム, 日本材料学会, pp. 81-85, 1996.
• T. Fujii, T. Abe, S. Inoue, M. Kato. Epitaxy and Morphology of Deposited α-Fe Films on High-Index Planes of Cu Substrates, Philosophical Magazine A, Vol. 74, No. 2, pp. 317-336, 1996.
• Masaharu Kato, Toshiyuki Fujii, Susumu Onaka. Elastic Strain Energies of Sphere, Plate and Needle Inclusions, Materials Science and Engineering, Vol. A211, pp. 95-103, 1996.
• 藤居俊之, 草鹿堅吾, 加藤雅治. Cu単結晶母相中のα-Fe粒子の成長に及ぼす外部磁場効果, 鉄と鋼, Vol. 81, No. 6, pp. 90-95, June 1995.
• Susumu Onaka, Toshiyuki Fujii, Masaharu Kato. The Elastic Strain Energy of a Coherent Inclusion with Deviatric Misfit Strains, Mechanics of materials, Vol. 20, No. 4, pp. 329-336, Apr. 1995.
• 藤居俊之, 草鹿堅吾, 加藤雅治. Cu単結晶母相中のα-Fe粒子の成長に及ぼす外部磁場効果, 鉄と鋼, Vol. 81, No. 6, pp. 696-701, 1995.
• 加藤雅治. 私の英語概要づくりノウハウ, まてりあ, Vol. 34, No. 4, pp. 510-511, 1995.
• S. Onaka, T. Fujii, M. Kato. The Elastic Strain Energy of a Coherent Inclusion with Deviatoric Misfit Strains, Mechanics of Materials, Vol. 20, No. 4, pp. 329-336, 1995.
• S. Onaka, S. Hashimoto, S. Miura, M. Kato. Effect of Diffusional Relaxation on the Shape Change of Liquid B2O3 Particles in a Deforming Cu Matrix, Acta Metallurgica et Materialia, Vol. 43, No. 4, pp. 1577-1585, 1995.
• H. Miura, T. Sakai, N. Tada, M. Kato, T. Mori. Effect of Strain Rate on Intermediate-Temperature Embrittlement of Cu-SiO2 Bicrystals with [001] 9°Twist Boundaries, Scripta Metallurgica et Materialia, Vol. 32, No. 9, pp. 185-190, 1995.
• Masaharu Kato, Toshiyuki Fujii. Elastic State and Orientation of Plate-Shaped Inclusions, Acta Metallurgica et Materiaria, Vol. 42, No. 9, pp. 2929-2936, Sept. 1994.
• K. Jumonji, S. Ueta, M. Kato, A. Sato. Temperature Dependence of Strain-Rate Sensitivity, Work Hardening and Dislocation Structure in Ni3Al Single Crystals, Philosophical Magazine A, Vol. 69, No. 6, pp. 1111-1124, 1994.
• H. Miura, T. Sakai, M. Kato. Ductility and Fracture of Cu Bicrystals with Boundary SiO2 Particles, Materials Science and Technology, Vol. 10, No. 12, pp. 1044-1049, 1994.
• H. Miura, H. Nakata, T. Sakai, M. Kato, T. Mori. Embrittlement of [001] Twist Grain Boundaries Induced by Bi Segregation, Applied Physics Letters, Vol. 65, No. 6, pp. 705-707, 1994.
• Y. Watanabe, H. Miura, M. Kato, A. Sato. Yield Stress of Aged Cu-Fe Alloy Single Crystals at Low Temperatures, Journal of Materials Science Letters, Vol. 13, pp. 922-924, 1994.
• 三浦博巳, 中田博士, 酒井 拓, 加藤雅治, 森 勉. Bi偏析によるCu[001]対称傾角粒界の脆化, 日本金属学会誌, 58, No. 5, pp. 477-482, 1994.
• H. Miura, M. Kato, T. Mori. Temperature Dependence of the Energy of Cu[110] Symmetric Tilt Grain Boundaries, Journal of Materials Science Letters, Vol. 13, pp. 46-48, 1994.
• M. Kato, T. Fujii. Elastic State and Orientation of Plate-Shaped inclusion, Acta Metallurgica et Materialia, Vol. 42, No. 9, pp. 2929-2936, 1994.
• Masaharu Kato, Toshiyuki Fujii, Tsutomu Mori. Comment on Comparison between Invariant Line and Structural Ledge Theories for Predicting the Habit Plane, Orientation Relationship and Interphase Boundary Structure of Plate-Shaped Precipitates, Scripta Metallurgica et Materialia, Vol. 28, No. 9, pp. 1167-1170, Sept. 1993.
• Toshiyuki Fujii, Miki Moriyama, Masaharu Kato, Tsutomu Mori. Growth of Grain-Boundary Precipitates in Cu-Fe-Co Bicrystals, Philosophical Magazine A, Vol. 68, No. 1, pp. 137-149, July 1993.
• H. Niwa, I. Yamaguchi, H. Yagi, M. Kato. Morphology and Crystallography of Single Crystal Precipitates on Al Film Grown by the Sputtering Method, Journal of Applied Physics, Vol. 73, No. 12, pp. 8575-8579, 1993.
• Y. Watanabe, M. Kato, A. Sato. Martensitic Transformation of Antiferro-Magnetic Fe Particles Embedded in a Cu Matrix in a Magnetic Filed, 北海道大学工学部研究報告, Vol. 162, No. 4, pp. 99-108, 1993.
• R. Monzen, M. Kato. Stress-Induced Martensitic Transformation of Small Fe-Co Particles in a Cu Matrix, ISIJ International, Vol. 33, No. 8, pp. 898-902, 1993.
• H. Niwa, S. Teramae, M. Kato. Crystallography and Electromigration Resistance of Epitaxial Al Films Grown on (011)Si Substrates by the Sputtering Method, Applied Physics Letters, Vol. 63, No. 2, pp. 203-204, 1993.
• Y. Watanabe, Y. Takada, H. Miura, M. Kato, A. Sato. Temperature Dependence of the Amount of Transformed Fe Particles in a Cu-1.5-mass%Fe Alloy, Journal of Materials Science, Vol. 28, No. 17, pp. 4578-4582, 1993.
• M. Kato, T. Fujii, T. Mori. Comment on Comparison between Invariant Line and Structural Ledge Theories for Predicting the Habit Plane, Orientation Relationship and Interphase Boundary Structure of Plate-Shaped Precipitates, Scripta Metallurgica et Materialia, Vol. 28, No. 9, pp. 1167-1170, 1993.
• K. Tamura, M. Ito, M. Kato, A. Sato. In Situ Observation of Moving Dislocations in a Cu-10Ni-6Sn Spinodal Alloy, Acta Metallurgica et Materialia, Vol. 41, No. 4, pp. 1047-1055, 1993.
• H. Miura, T. Sakai, N. Tada, M. Kato, T. Mori. Temperature Dependence of Ductility and Fracture of Cu-SiO2 Bicrystals with [001] Twist Boundaries, Acta Metallurgica et Materialia, Vol. 41, No. 4, pp. 1207-1213, 1993.
• K. Jumonji, T. Shinohara, M. Kato, A. Sato. In Situ Observation of Superdislocation Motion and High Temperature Strengthening of Ni3Al Single Crystals, Philosophical Magazine A, Vol. 67, No. 3, pp. 627-641, 1993.
• 三浦博巳, 吉田 隆, 酒井 拓, 加藤雅治, 森 勉. Bi偏析によるCu[110]対称傾角粒界の脆化, 日本金属学会誌, Vol. 57, No. 5, pp. 479-485, 1993.
• T. Fujii, M. Moriyama, M. Kato, T. Mori. Growth of Grain -Boundary Precipitates in Cu-Fe-Co Bicrystals, Philosophical Magazine A, Vol. 68, No. 1, pp. 137-149, 1993.
• M. Kato, T. Mori. Internal Friction of Copper Bicrystal with [001] Twist Boundaries, Philosophical Magazine A, Vol. 68, No. 5, pp. 939-949, 1993.
• TOSHIYUKI FUJII, Tsutomu Mori, Masaharu Kato. Crystallography and Morphology of Needle-Like α-Fe Precipitate Particles in a Cu Matrix, Acta Metallurgica et Materialia, Vol. 40, No. 12, pp. 3413-3420, Dec. 1992.
• TOSHIYUKI FUJII, Susumu Onaka, Tsutomu Mori, Masaharu Kato. A New Method of Deriving Fundamental Rate Equations for Ostwald Ripening, ISIJ International, Vol. 32, No. 10, pp. 1128-1129, Oct. 1992.
• Toshioyuki Fujii, Yoshimi Watanabe, Teruhiko Enami, Akikazu Sato, Masaharu Kato. Magnetic Anisotropy Caused by the Formation of Stress-Induced Martensite in Small Iron Particles in a Copper Matrix, ISIJ International, Vol. 32, No. 9, pp. 1027-1033, Sept. 1992.
• 加藤雅治, 藤居俊之, 星野安生, 森勉. 銅母相中の鉄微粒子のマルテンサイト変態におよぼす外力効果, 日本金属学会誌, Vol. 56, No. 8, pp. 865-872, Aug. 1992.
• 藤居俊之, 守山実希, 加藤雅治, 森勉. Cu[011]対称傾角粒界上のFe-Co析出物, 熱処理, Vol. 32, No. 4, pp. 183-184, Apr. 1992.
• R. Monzen, M. Kato. Face-Centered Cubic to Body-Centered Cubic Martensitic Transformation of Fe-Co Particles in a Copper Matrix, Journal of Materials Science Letters, Vol. 11, No. 1, pp. 56-58, 1992.
• M. Hara, K. Domen, M. Kato, T. Onishi, H. Nozoye. Surface Reaction of CH2I2 with an Al(111) Surface, Journal of Physical Chemistry, Vol. 96, No. 6, pp. 2637-2641, 1992.
• H. Niwa, M. Kato. Single-Crystal Al Films Grown by Sputtering on (111)Si Substrates, Applied Physics Letters, Vol. 60, No. 20, pp. 2520-2521, 1992.
• 加藤雅治, 藤居俊之, 星野安生, 森 勉. 銅母相中の鉄微小粒子のマルテンサイト変態におよぼす外力効果, 日本金属学会誌, Vol. 56, No. 8, pp. 865-872, 1992.
• T. Fujii, Y. Watanabe, T. Enami, A. Sato, M. Kato. Magnetic Anisotropy Caused by the Formation of Stress-Induced Martensite in Small Iron Particles in a Copper Matrix, ISIJ International, Vol. 32, No. 9, pp. 1027-1033, 1992.
• 藤居俊之, 守山実希, 加藤雅治, 森 勉. Cu[011]対称傾角粒界上のFe-Co析出物, 熱処理, Vol. 32, No. 4, pp. 183-184, 1992.
• 加藤雅治. 異相界面の結晶学の幾何学的考察, 鉄と鋼, Vol. 78, No. 2, pp. 209-214, 1992.
• M. Kato, T. Mori. Statistical Consideration of Fatigue Crack Initiation, Mechanics of Materials, Vol. 13, No. 2, pp. 155-163, 1992.
• MASAHARU KATO. Invariant -Plane and Invariant -Line Deformation Criteria and Their Application to Interface Crystallography, Materials Transactions, JIM, Vol. 33, No. 2, pp. 89-96, 1992.
• 加藤雅治. 格子対応、結晶方位関係と界面の幾何学的理論, 日本金属学会会報, Vol. 31, No. 2, pp. 149, 1992.
• T. Fujii, S. Onaka, T. Mori, M. Kato. A New Method of Deriving Rate Equations for Ostwald Ripening, ISIJ International, Vol. 32, No. 10, pp. 1128-1129, 1992.
• T. Fujii, T. Mori, M. Kato. Crystallography and Morphology of Needle-like α-Fe Precipitate Particles in a Cu Matrix, Acta Metallurgica et Materialia, Vol. 40, No. 12, pp. 3413-3420, 1992.
• TOSHIYUKI FUJII, Masaharu Kato, Tsutomu Mori. Coarsening of Incoherent α-Fe Particles in a Cu-Fe Alloy, Material Transactions, JIM, Vol. 32, No. 3, pp. 229-236, Mar. 1991.
• Y. Watanabe, H. Nozaki, M. Kato, A. Sato. Formation of Fe16N2 and Development of Magnetic Anisotropy in a Fe-N Alloy, Acta Metallurgica et Materialia, Vol. 39, pp. 3161-3166, 1991.
• M. Wada, A. Fujii, T. Yoshida, M. Kato. Epitaxy of Fe Films on Spherical Cu and Au Substrates, Philosophical Magazine B, Vol. 64, No. 4, pp. 485-494, 1991.
• H. Niwa, M. Kato. Epitaxial Growth of Al on Si(001) by Sputtering, Applied Physics Letters, Vol. 59, No. 5, pp. 543-545, 1991.
• T. Fujii, M. Kato, T. Mori. Coarsening of Incoherent α-Fe Particles in a Cu-Fe Alloy, Materials Transactions, JIM, Vol. 32, No. 3, pp. 229-236, 1991.
• Y. Watanabe, M. Kato, A. Sato. Growth Kinetics and Martensitic Transformation of Large Fe Particles in Cu - 1.5mass%Fe Alloy, Journal of Materials Science, Vol. 26, No. 16, pp. 4307-4312, 1991.
• R. Monzen, M. Kato. Detection of Elastic Distortions Created by Martensitic Transformation and Deformation Using Small b.c.c. Particles in a Copper Matrix, Materials Science and Engineering, Vol. A146, No. 1-2, pp. 181-196, 1991.
• M. Kato. Simple Criteria for Epitaxial Relationships between f.c.c. and b.c.c. Crystals, Materials Science and Engineering, Vol. A146, No. 1-2, pp. 205-216, 1991.
• S. Onaka, M. Kato. Relaxed Stresses and Relaxation Kinetics Caused by Diffusion around Second-Phase Particles, Materials Science and Engineering, Vol. A146, No. 1-2, pp. 217-232, 1991.
• H. R. P. Inoue, K-m. Hsiung, M. Kato, D. P. Pope. Orientation Dependence of Cyclic Stress Asymmetry in Ni3Ge Single Crystals, Physica Status Solidi (a), Vol. 123, No. 2, pp. 399-414, 1991.
• S. Onaka, M. Kato. Unified Analysis for Various Diffusion-Controlled Deformation and Fracture Processes, ISIJ International, Vol. 31, No. 4, pp. 331-341, 1991.
• S. Onaka, T. Okada, M. Kato. Relaxation Kinetics and Relaxed Stresses Caused by Interface Diffusion around Spherical Inclusions, Acta Metallurgica et Materialia, Vol. 39, No. 5, pp. 971-978, 1991.
• M. Kato, H. Niwa. Epitaxial Growth of Sputtered Al Films on Si(001) Substrates, Philosophical Magazine B, Vol. 64, No. 3, pp. 317-326, 1991.
• R. Monzen, M. Kato. Elastic Strains Created by the f.c.c. to b.c.c. Martensitic Transformation of Spherical Fe-Co Particles in a Cu Matrix, ISIJ International, Vol. 30, No. 3, pp. 226-232, 1990.
• S. Onaka, S. Soeta, M. Kato. Yield Stress of a Copper Single Crystal Containing B2O3 Particles, Journal of Materials Science, Vol. 25, No. 1A, pp. 220-222, 1990.
• M. Shibata-Yanagisawa, M. Kato. Crystallographic Analysis of Cubic (Tetragonal) to Monoclinic Martensitic Transformations based on the Infinitesimal Deformation Approach, Materials Transactions, JIM, Vol. 31, No. 1, pp. 18-24, 1990.
• 三浦博巳, 童 恵君, 加藤雅治, 森 勉. 粒界上の SiO2 粒子の形状解析による銅の[011]対称傾角粒界のキャラクタリゼーション, 日本金属学会誌, Vol. 54, No. 11, pp. 1165-1170, 1990.
• S. Onaka, S. Miura, M. Kato. Relaxation in Dispersion-Hardened Alloys by Volume Diffusion, Mechanics of Materials, Vol. 8, pp. 285-292, 1990.
• M. Hara, K. Domen, M. Kato, T. Onishi, H. Nozoye. Observation of an Alkyl Aluminium Complex Formed by Reaction of CH2I2 with an Al(111) Surface, Journal of Chemical Society, Chemical Communications, Vol. 23, pp. 1717-1718, 1990.
• 門前亮一, 北川和夫, 加藤雅治, 森 勉. Cu-Fe-Co合金双結晶における粒界析出, 日本金属学会誌, Vol. 54, No. 12, pp. 1308-1313, 1990.
• M. Kato, H. Niwa, H. Yagi, H. Tsuchikawa. Diffusional Relaxation and Void Growth in an Aluminum Interconnect of Very Large Scale Integration, Journal of Applied Physics, Vol. 68, No. 1, pp. 334-338, 1990.
• M. Kato, M. Wada, M. Shibata-Yanagisawa, T. Mori. Epitaxial Relationships between f.c.c. and b.c.c. Crystals, Proceedings of the International Congress on Intergranular and Interphase Boundaries in Materials, (IIB '89), Paris, France, Colloque de Physique, Vol. 51, (C1-)849-854, 1990.
• R. Monzen, K. Kitagawa, H. Miura, M. Kato, T. Mori. Correlation between the Boundary Energy and Precipitation in Copper-[011] Symmetric Tilt Boundaries, Proceedings of the International Congress on Intergranular and Interphase Boundaries in Materials, (IIB '89), Paris, France, Colloque de Physique, Vol. 51, pp. (C1-)269-274, 1990.
• H. Miura, M. Kato, T. Mori. Determination of Boundary Energies of Cu from the Shape of Boundary SiO2 Particles, Proceedings of the International Congress on Intergranular and Interphase Boundaries in Materials, (IIB '89), Paris, France, Colloque de Physique, Vol. 51, (C1-)263-268, 1990.
• Y. Watanabe, M. Kato, A. Sato. The Effect of Magnetic Field on the Martensitic Transformation of Fe Particles in a Cu-Fe Alloy, Proceedings of the International Conference on Martensitic Transformations, (ICOMAT-89), (edited by B. C. Muddle), Sydney, Australia, Materials Science Forum, Vol. 56-58, pp. 241-246, 1990.
• M. Kato, M. Shibata-Yanagisawa. Infinitesimal Deformation Approach of the Phenomenological Crystallographic Theory of Martensitic Transformations, Journal of Materials Science, Vol. 25, No. 1A, pp. 194-202, 1990.
• H. Niwa, H. Yagi, H. Tsuchikawa, M. Kato. Stress Distribution in an Aluminum Interconnect of Very Large Scale Integration, Journal of Applied Physics, Vol. 68, No. 1, pp. 328-333, 1990.
• 門前亮一, 北川和夫, 加藤雅治, 森勉. Cu-Fe-Co合金双結晶における粒界析出, 日本金属学会誌, Vol. 54, No. 12, pp. 1308-1313, 1990.
• M. Wada, S. Uda, M. Kato. The f.c.c. to b.c.c. Transformation in Fe Film on a Spherical Cu Substrates, Philosophical Magazine A, Vol. 59, No. 1, pp. 31-45, 1989.
• M. Kato, T. Shinohara. Temperature Dependence of Ductility of Copper Polycrystals Containing Dispersed B2O3 Particles, Journal of Materials Science Letters, Vol. 8, No. 10, pp. 1169-1171, 1989.
• S. Onaka, M. Kato. A Free Energy Approach for Deriving Rate Equations for Diffusion-Controlled Sintering, ISIJ International, Vol. 29, No. 10, pp. 852-861, 1989.
• R. Monzen, M. Kato, T. Mori. Diffusional Relaxation around Martensitically Transformed Fe-Co Particles in a Cu Matrix, Acta Metallurgica, Vol. 37, No. 12, pp. 3177-3182, 1989.
• M. Kato, A. Nishimura, T. Matsuyama, S. Horie. Cyclic Deformation Behavior of a Cu-1.5mass%Fe Alloy with Precipitate Iron Particles, Materials Science and Engineering, Vol. A111, No. 1, pp. 17-25, 1989.
• M. Kato, T. Kubo, T. Mori. Epitaxial Relationships between Copper Deposits and α-Iron Substrates, Acta Metallurgica, 36, No. 8, pp. 2071-2081, 1988.
• T. Noma, M. Yoshimura, S. Somiya, M. Kato, M. S. Yanagisawa, H. Seto. Formation of Diffusionlessly Transformed Tetragonal Phases in Rapid Quenching of ZrO2-Y2O3 Melts, Journal of Materials Science, Vol. 23, No. 8, pp. 2689-2692, 1988.
• T. Mori, H. Miura, T. Tokita, J. Haji, M. Kato. Determination of the Energies of [001] Twist Boundaries in Cu with the Shape of Boundary SiO2 Particles, Philosophical Magazine Letters, Vol. 58, No. 1, pp. 11-15, 1988.
• H-R. Pak, J. Chu, M. Kato, D. P. Pope. Friction Stress and Back Stress in Cyclically Deformed Ni3Ge Single Crystals, Materials Science and Engineering, Vol. 100, No. 1, pp. 31-36, 1988.
• S. Onaka, M. Kato, S. Soeta, T. Mori. A New Approach for Diffusional Growth of Grain-Boundary Voids, Transactions of the Japan Institute of Metals, Vol. 29, No. 4, pp. 284-291, 1988.
• M. Kato, M. Shibata-Yanagisawa, H. Seto. Reply (to Comment on 'Crystallographic Analysis of the Cubic-to-Tetragonal Phase Transformation in the ZrO2-Y2O3 System'), Journal of the American Ceramic Society, Vol. 71, No. 3, C171-C172, 1988.
• A. Sato, S. Katsuta, M. Kato. Stress Aging of a Cu-10Ni-6Sn Spinodal Alloy, Acta Metallurgica, Vol. 36, No. 3, pp. 633-640, 1988.
• S. Onaka, S. Soeta, M. Kato, R. Tanaka. High-Temperature Deformation and Fracture Behaviour of Cu-SiO2 Bicrystals, Journal of Materials Science, Vol. 23, No. 2, pp. 577-582, 1988.
• M. Shibata, M. Kato, H. Seto, T. Noma, M. Yoshimura, S. Somiya. The Effects of External Stress on the Cubic-Tetragonal Transformation in Rapidly Quenched ZrO2-Y2O3, Journal of Materials Science, Vol. 22, No. 4, pp. 1432-1436, 1987.
• M. Shibata-Yanagisawa, M. Kato, H. Seto, N. Ishizawa, N. Mizutani, M. Kato. Crystallographic Analysis of the Cubic-to-Tetragonal Phase Transformation in the ZrO2-Y2O3 System, Journal of the American Ceramic Society, Vol. 70, No. 7, pp. 503-509, 1987.
• S. Onaka, M. Kato, R. Tanaka. Intermediate Temperature Embrittlement of Dispersion Hardened Cu-GeO2 Polycrystals, Transactions of the Japan Institute of Metals, Vol. 28, No. 1, pp. 32-40, 1987.
• M. Wada, S. Uda, M. Kato. Orientation of an Iron Film Formed on a Spherical Copper Substrate: an FIM Study, Proceedings of the 34th International Field Emission Symposium, Osaka, Japan, Journal de Physique, Colloque C6, Vol. 48, No. 11, pp. 65-70, 1987.
• M. Kato, T. Mishima. The Crystallography of α-Iron Deposited onto the(112) Plane of a Cu-Ni Alloy, Philosophical Magazine A, Vol. 56, No. 6, pp. 725-733, 1987.
• S. Onaka, M. Kato, T. Mori. Reexamination of Grain-Boundary Sliding by Diffusion, Metallurgical Transactions A, Vol. 17A, No. 11, pp. 1949-1953, 1986.
• M. Kato, S. Horie, T. C. Lee. Evaluation of Critical Resolved Shear Stress for Systems with General Periodic Fields, Physica Status Solidi (a), Vol. 98, No. 1, pp. 209-214, 1986.
• M. Kato, S. Katsuta, S. Okamine, A. Sato. Deformation Behaviour and Microstructure of Cu-10Ni-6Sn Spinodal Alloy Single Crystals, Materials Science and Engineering, Vol. 77, No. 1, pp. 95-102, 1986.
• 尾中 晋, 加藤雅治, 田中良平. Cu-GeO2 分散強化合金多結晶の中間温度脆性, 日本金属学会誌, Vol. 50, No. 2, pp. 141-147, 1986.
• M. Kato, S. Fukase, A. Sato, T. Mori. F.C.C. to B.C.C. Transformation in Thin Iron Films Deposited onto Copper Single Crystals, Acta Metallurgica, Vol. 34, No. 7, pp. 1179-1188, 1986.
• T. Noma, M. Yoshimura, M. Kato, M. Shibata, H. Seto, S. Somiya. Microstructural Evolution in Rapidly Quenched ZrO2-3mol%Y2O3 by Annealing, 窯業協会誌, Vol. 94, No. 8, pp. 887-890, 1986.
• H-R. Pak, L-M. Hsiung, M. Kato. Cyclic Deformation Behaviour of Ni3Ge Single Crystals at Room Temperature, Philosophical Magazine A, Vol. 53, No. 6, pp. 887-896, 1986.
• K-H. Park, J. C. LaSalle, L. H. Schwartz, M. Kato. Mechanical Properties of Spinodally Decomposed Fe-30wt%Cr Alloys: Yield Strength and Aging Embrittlement, Acta Metallurgica, Vol. 34, No. 9, pp. 1853-1865, 1986.
• M. Kato, H-R. Pak. Some Remarks on Thermodynamics of Stress-Induced Martensitic Transformations, Physica Status Solidi (b), Vol. 130, No. 2, pp. 421-430, 1985.
• H-r. Pak, L-m. Hsiung, M. Kato. Cyclic Deformation Behaviour of Ni3Ge Single Crystals at Room Temperature, Materials Research Society Symposium Proceedings, High-Temperature Ordered Alloys (edited by C. C. Koch, C. T. Liu and N. S. Stoloff), Pittsburgh, U.S.A., Vol. 39, pp. 239-246, 1985.
• S. Onaka, A. Sato, M. Miyakoshi, M. Kato. Low-Temperature Recovery of Dispersion-Hardened Cu-GeO2 Alloy Single Crystals, Journal of Materials Science Letters, Vol. 4, No. 12, pp. 1504-1506, 1985.
• H-R. Pak, S. N. Chang, M. Kato. A New Method of Determining the Orientation of the Parent Phase and the Habit Plane Normals, Journal of Materials Science, Vol. 20, No. 3, pp. 947-954, 1985.
• M. Kato, C. Toksoy, C. S. L. Pak, W. Pratt, K. Mukherjee. Magnetization Measurement Associated with γ → α Martensitic Transformation of Fe Particles in a Cu-1.59 Pct Fe Alloy, Metallurgical Transactions A, Vol. 15A, No. 4, pp. 755-756, 1984.
• M. Kato, H-R. Pak. Thermodynamics of Stress-Induced First-Order Phase Transformations in Solids, Physica Status Solidi (b), Vol. 123, No. 2, pp. 415-424, 1984.
• K. Mukherjee, M. Chandrasekaran, M. Kato. Electric Resistivity of an Equiatomic Solid and Liquid Au-Cd Alloy, Physica Status Solidi (a), Vol. 83, No. 2, pp. 657-667, 1984.
• K. Mukherjee, T-W. Hsu, M. Kato. Fiber Morphology Resulting from Solid State Coalescence of Spherical Precipitates, Physica Status Solidi (a), Vol. 81, No. 2, pp. 439-444, 1984.
• T. C. Lee, M. Kato, T. Mori. Dislocation Motion in Two-Dimensional Periodic Fields, Materials Science and Engineering, Vol. 62, No. 2, pp. 173-179, 1984.
• M. Kato, S. Onaka, T. Mori, T. Mura. Statistical Consideration of Plastic Strain Accumulation in Cyclic Deformation and Fatigue Crack Initiation, Scripta Metallurgica, Vol. 18, No. 11, pp. 1323-1326, 1984.
• MASAHARU KATO. Activation Energy for Dislocation Motion in a One-Dimensional Periodic Field, Physica Status Solidi (a), Vol. 79, No. 2, pp. 517-522, 1983.
• 加藤雅治. ミシガン州立大学における研究と教育, 鉄と鋼, Vol. 68, No. 3, pp. 539-540, 1982.
• M. Kato, T. C. Lee, S. L. Chan. Energetics in Thermally Activated Dislocation Motion in a Spinodally Modulated Structure, Materials Science and Engineering, Vol. 54, No. 2, pp. 145-150, 1982.
• MASAHARU KATO. Hardening by Spinodally Modulated Structure in b.c.c. Alloys, Acta Metallurgica, Vol. 29, No. 1, pp. 79-87, 1981.
• T. Mori, M. Kato. Asymptotic Form of Activation Energy for Double-Kink Formation in a Dislocation in a One Dimensional Periodic Field, Philosophical Magazine A, Vol. 43, No. 6, pp. 1315-1320, 1981.
• M. Kato, T. Mori, L. H. Schwartz. The Energetics of Dislocation Motion in Spinodally Modulated Structures, Materials Science and Engineering, Vol. 51, No. 1, pp. 25-29, 1981.
• A. Sato, M. Kato, Y. Sunaga, T. Miyazaki, T. Mori. Stress Induced Martensitic Transformation in Fe-Ni-C Alloy Single Crystals, Acta Metallurgica, Vol. 28, No. 3, pp. 367-376, 1980.
• M. Kato, T. Mori, L. H. Schwartz. Hardening by Spinodal Modulated Structure, Acta Metallurgica, Vol. 28, No. 3, pp. 285-290, 1980.
• M. Kato, L. H. Schwartz. The Temperature Dependence of Yield Stress and Work Hardening in Spinodally Decomposed Cu-10Ni-6Sn Alloy, Materials Science and Engineering, Vol. 41, No. 1, pp. 137-142, 1979.
• A. Sato, M. Kato, T. Mori. Stress Induced Martensitic Transformation of Fe-Ni-C Alloy Single Crystals, Proceedings of the 3rd International Conference on Martensitic Transformations, Proceedings of the 3rd International Conference on Martensitic Transformations, pp. 331-336, 1979.
• M. Kato, R. Monzen, T. Mori. A Stress-Induced Martensitic Transformation of Spherical Iron Particles in a Cu-Fe Alloy, Acta Metallurgica, Vol. 26, No. 4, pp. 605-613, 1978.
• T. Mori, P. C. Cheng, M. Kato, T. Mura. Elastic Strain Energy of Precipitates and Periodically Distributed Inclusions in Anisotropic Media, Acta Metallurgica, Vol. 26, No. 9, pp. 1435-1441, 1978.
• M. Kato, T. Mori. Orientation of Martensite Formed in Fe-23Ni-5Cr Crystals under Uniaxial Stress along [001], Acta Metallurgica, Vol. 25, No. 8, pp. 951-956, 1977.
• T. Mura, T. Mori, M. Kato. The Elastic Field Caused by a General Ellipsoidal Inclusion and the Application to Martensite Formation, Journal of Mechanics and Physics of Solids, Vol. 24, No. 5, pp. 305-318, 1976.
• M. Kato, T. Mori. Stress-Induced Martensite in Single Crystals of an Fe-23Ni-5Cr Alloy, Acta Metallurgica, Vol. 24, No. 9, pp. 853-860, 1976.

著書

• 藤居俊之, 尾中晋, 加藤雅治. 純Al単結晶の繰り返し変形に伴う転位組織の形成, 材料開発のための顕微鏡法と応用写真集，日本金属学会, 社団法人日本金属学会, pp. 146, Mar. 2006.
• 藤居俊之, 尾中晋, 加藤雅治. 材料開発のための顕微鏡法と応用写真集（純Al単結晶の繰り返し変形に伴う転位組織の形成）, 社団法人日本金属学会, pp. 146, Mar. 2006.
• 加藤雅治, 熊井真次. 転位を通して材料の力学的性質を理解する, 第５回軽金属フォーラムテキスト, 第５回軽金属フォーラムテキスト, pp. 18-25, 2001.
• 加藤雅治. 技術者のための鉄鋼材料入門：材料の中をみる－組織と熱力学・状態図－, 社団法人　日本鉄鋼協会, 社団法人　日本鉄鋼協会, pp. 1-18, 2000.
• 加藤雅治. 入門転位論, 裳華房, 裳華房, 1999.
• 加藤雅治, 熊井真次, 尾中 晋. 材料強度学（マテリアル工学シリーズ ３）, 朝倉書店, 朝倉書店, 1999.
• 加藤雅治. 楕円体介在物法による第二相の形態予測および複相材料の力学モデル, 組織・強度に関するモデリングとシミュレーションに関する研究調査報告書，未踏科学技術協会, 組織・強度に関するモデリングとシミュレーションに関する研究調査報告書，未踏科学技術協会, pp. 149-160, 1998.
• 加藤雅治　分担執筆. 応用物理用語大事典, 応用物理学会編，オーム社, 応用物理学会編，オーム社, 1998.
• 加藤雅治, 永田和宏 編. 解いてわかる材料工学II, 日本鉄鋼協会監修，丸善，東京, 日本鉄鋼協会監修，丸善，東京, 1997.
• 永田和宏, 加藤雅治 編. 解いてわかる材料工学Ｉ, 日本鉄鋼協会監修，丸善，東京, 日本鉄鋼協会監修，丸善，東京, 1997.
• 梶原正憲, 藤居俊之, 加藤雅治. 相安定性と相変化の熱力学, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, pp. 42-62, 1996.
• T. Yoshida, H. Umaki, M. Nakashiro, T. Fujii, K. Tomita, M. Kato. High-Temperature Fatigue Life Assessment of 2.25Cr-1Mo Steel by Microstructural Observation, Proceedings of the Sixth International Conference on Creep and Fatigue: Design and Life Assessment at High Temperature, London, U.K., Institution of Mechanical Engineers, Proceedings of the Sixth International Conference on Creep and Fatigue: Design and Life Assessment at High Temperature, London, U.K., Institution of Mechanical Engineers, pp. 165-174, 1996.
• 藤居俊之, 冨田和秀, 加藤雅治, 吉田 隆, 中代雅士. 2.25Cr-1Mo鋼の内部組織観察による高温疲労損傷評価, 「疲労破壊機構解明のための組織学的アプローチ」, 日本金属学会, 仙台, 「疲労破壊機構解明のための組織学的アプローチ」, 日本金属学会, 仙台, pp. 21-24, 1996.
• 藤居俊之, 梶原正憲, 加藤雅治. 偏差ミスフフィット歪を持つ不均質整合介在物の安定形状, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, pp. 106-112, 1996.
• 加藤雅治, 藤居俊之, 梶原正憲. 変形および第二相の熱力学, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, メゾスコピック二相組織形成の熱力学とシミュレーションに関する調査研究報告書，材料の不均一性研究会, pp. 63-70, 1996.
• H. Miura, H. Nakata, T. Sakai, M. Kato, T. Mori. Temperature Dependence of Embrittlement of Cu [001] Tilt Boundaries Induced by Bi Segregation and Its Correlation with Grain-Boundary Energy, Interface Science and Materials Interconnection, Proceedings of JIMIS-8, The Japan Institute of Metals, Interface Science and Materials Interconnection, Proceedings of JIMIS-8, The Japan Institute of Metals, pp. 249-252, 1996.
• T. Fujii, H. Niwa, M. Kato. Epitaxial Growth of Al and Cu on Si Substrates, Interface Science and Materials Interconnection, Proceedings of JIMIS-8, The Japan Institute of Metals, Interface Science and Materials Interconnection, Proceedings of JIMIS-8, The Japan Institute of Metals, pp. 307-310, 1996.
• 加藤雅治. 強化機構に対して転位論や微視力学はどの程度まで使えるか, 鉄鋼の高強度化の最前線，日本鉄鋼協会, 鉄鋼の高強度化の最前線，日本鉄鋼協会, 1995.
• 加藤雅治. 変形と破壊の熱力学, 材料創出の熱力学 日本金属学会, 材料創出の熱力学 日本金属学会, 1995.
• H. Miura, T. Sakai, M. Kato, T. Mori. Effect of Distribution of Grain-Boundary Particles on Intermediate-Temperature Embrittlement of Cu-SiO2 Bicrystals, Strength of Materials, Proceedings of the 10th International Conference on the Strength of Materials (JIMIC-2), Sendai, Japan, The Japan Institute of Metals, Strength of Materials, Proceedings of the 10th International Conference on the Strength of Materials (JIMIC-2), Sendai, Japan, The Japan Institute of Metals, pp. 603-606, 1994.
• K. Jumonji, T. Ishida, M. Kato, A. Sato. Temperature Dependence of Dislocation Structure and Anomalous Strengthening in Ni3Al Single Crystals, Proceedings of the 7th JIM International Symposium on Aspects of High Temperature Deformation and Fracture in Crystalline Materials, (JIMIS-7), Nagoya, Japan, Proceedings of the 7th JIM International Symposium on Aspects of High Temperature Deformation and Fracture in Crystalline Materials, (JIMIS-7), Nagoya, Japan, pp. 179-186, 1993.
• H. Miura, T. Sakai, N. Tada, M. Kato, T. Mori. Intermediate-Temperature Embrittlement of Cu-SiO2 Bicrystals with [001] Twist Boundaries, Proceedings of the 7th JIM International Symposium on Aspects of High Temperature Deformation and Fracture in Crystalline Materials, (JIMIS-7), Nagoya, Japan, Proceedings of the 7th JIM International Symposium on Aspects of High Temperature Deformation and Fracture in Crystalline Materials, (JIMIS-7), Nagoya, Japan, pp. 237-244, 1993.
• 加藤雅治, 分担監修・執筆. 絵でみる工業材料事典－金属材料編, 「工業材料」1993年12月別冊, 日刊工業新聞社, 東京, 「工業材料」1993年12月別冊, 日刊工業新聞社, 東京, 1993.
• H. Yagi, H. Niwa, T. Hosoda, M. Inoue, H. Tsuchikawa, M. Kato. Analytical Calculation and Direct Measurement of Stress in an Aluminum Interconnect of Very Large Scale Integration, Stress-Induced Phenomena in Metallization (American Vacuum Society Series 13), American Institute of Physics, New York, Stress-Induced Phenomena in Metallization (American Vacuum Society Series 13), American Institute of Physics, New York, pp. 44-55, 1992.
• 加藤雅治. 材料強度学概論, 「鉄鋼工学セミナー テキスト(材料コース)」, 日本鉄鋼協会, 「鉄鋼工学セミナー テキスト(材料コース)」, 日本鉄鋼協会, pp. 99-112, 1990.
• 丹羽秀夫, 八木春良, 土川春穂, 加藤雅治. Al配線内の応力とストレスマイグレーションに関する理論的研究, 「半導体・集積回路技術」, 電気化学協会 電子材料委員会, 「半導体・集積回路技術」, 電気化学協会 電子材料委員会, pp. 1-6, 1990.
• M. Shibata-Yanagisawa, H. Seto, M. Kato, T. Noma, M. Yoshimura, S. Somiya, N. Ishizawa, N. Mizutani, M. Kato. The Morphology and Crystallography of Cubic-to-Tetragonal Phase Transformations in ZrO2-Y2O3, Advances in Ceramics, Science and Technology of Zirconia III, American Ceramic Society, U.S.A., Advances in Ceramics, Science and Technology of Zirconia III, American Ceramic Society, U.S.A., Vol. 24, pp. 523-530, 1988.
• T. Noma, M. Yoshimura, S. Somiya, M. Kato, M. Shibata, H. Seto. Stability of Diffusionlessly Transformed Tetragonal Phases in Rapidly Quenched ZrO2-Y2O3, Advances in Ceramics, Science and Technology of Zirconia III, American Ceramic Society, U.S.A. , Advances in Ceramics, Science and Technology of Zirconia III, American Ceramic Society, U.S.A. , pp. 377-384, 1988.
• S. Onaka, M. Kato, T. Mori. Re-examination of the Intermediate and Final Stage of Sintering Controlled by Diffusion, Proceedings of the 4th International Symposium on Science and Technology of Sintering, (Sintering '87), (edited by S. Somiya, M. Shimada, M. Yoshimura and R. Watanabe), Tokyo, Japan, Elsevier Applied Science, London, Proceedings of the 4th International Symposium on Science and Technology of Sintering, (Sintering '87), (edited by S. Somiya, M. Shimada, M. Yoshimura and R. Watanabe), Tokyo, Japan, Elsevier Applied Science, London, Vol. 1, pp. 334-339, 1988.
• S. Onaka, M. Kato, T. Mori. Unified Analysis of Various Diffusion-Controlled Deformation and Fracture Processes, Tokyo Institute of Technology - Harbin Institute of Technology Symposium on Materials Science, Tokyo, Japan, Tokyo Institute of Technology - Harbin Institute of Technology Symposium on Materials Science, Tokyo, Japan, pp. 20-21, 1988.
• 吉村昌弘, 宗宮重行, 野間竜男, 横川善之, 加藤雅治, 芝田-柳沢めざめ. 融解超急冷による高融点酸化物準安定結晶相の合成, 「 新素材シリーズ 光熱技術」, (宗宮重行, 石亀希男, 吉村昌弘 編), 内田老鶴圃, 東京, 「 新素材シリーズ 光熱技術」, (宗宮重行, 石亀希男, 吉村昌弘 編), 内田老鶴圃, 東京, pp. 59-77, 1987.
• 加藤雅治. 拡散律速の粒界すべり及び粒界ボイド成長の速度式, 「高温変形および破壊ーその基礎と応用」, 日本金属学会, 「高温変形および破壊ーその基礎と応用」, 日本金属学会, pp. 25-28, 1987.
• M. Kato, S. Fukase, T. Mishima, A. Sato, T. Mori. F.C.C. to B.C.C. Transformation in Iron Films Deposited onto Copper and Nickel Substrates, Proceedings of Third International Conference on Martensitic Transformations, (ICOMAT-86), Nara, Japan, Proceedings of Third International Conference on Martensitic Transformations, (ICOMAT-86), Nara, Japan, pp. 343-348, 1987.
• A. Sato, K. Takagaki, S. Horie, M. Kato, T. Mori. Cyclic Deformation and Fracture Behavior of Fe-Mn-Si Shape Memory Alloys, Proceedings of Third International Conference on Martensitic Transformations, (ICOMAT-86), Nara, Japan, Proceedings of Third International Conference on Martensitic Transformations, (ICOMAT-86), Nara, Japan, pp. 979-984, 1987.
• 芝田めざめ, 瀬戸浩志, 加藤雅治, 野間竜男, 吉村昌弘, 宗宮重行. ZrO2-Y2O3 系の応力下での立方晶→正方晶無拡散変態の結晶学, ジルコニア セラミックス 8, (宗宮重行, 吉村昌弘 編), 内田老鶴圃, 東京, ジルコニア セラミックス 8, (宗宮重行, 吉村昌弘 編), 内田老鶴圃, 東京, pp. 87-98, 1986.
• 野間竜男, 吉村昌弘, 加藤雅治, 芝田めざめ, 瀬戸浩志, 宗宮重行. 超急冷したY2O3 添加ZrO2 中の正方晶, ジルコニア セラミックス 6, (宗宮重行, 吉村昌弘 編), 内田老鶴圃, 東京, ジルコニア セラミックス 6, (宗宮重行, 吉村昌弘 編), 内田老鶴圃, 東京, pp. 1-7, 1986.
• 加藤雅治, 森 勉. 高温における固相脆化機構, 「連続鋳造における力学的挙動」, 鉄鋼基礎共同研究会, 日本鉄鋼協会, 「連続鋳造における力学的挙動」, 鉄鋼基礎共同研究会, 日本鉄鋼協会, pp. 69-74, 1985.

国際会議発表 (査読有り)

• Nobuo Nakada, Yutaro Amemiya, Naoki Miyazawa, Makoto Kosaka, Masaharu Kato. Effect of Internal Stress Accommodation on Plastic Deformation Behavior in Pearlitic Steel, The 8th International Conference on Solid→Solid Phase Transformations in Inorganic Materials, PTM2022, June 2022.
• Miyajima yoji, Ueda Taro, Hiroki Adachi, Fujii Toshiyuki, SUSUMU ONAKA, Kato Masaharu. Dislocation Density of FCC Metals Processed by ARB, 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD), 2016.
• Yukito Nakanishi, Yoji MIYAJIMA, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Stability of Fatigued Dislocation Structure in UFG Aluminum against Monotonic Tensile Deformation, International Workshop on Bulk Nanostructured Metals, 2012.
• Satoshi Okubo, Yoji MIYAJIMA, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Low temperature creep behavior of ultrafine-grained Cu, International Workshop on Bulk Nanostructured Metals, 2012.
• Yoji MIYAJIMA, Hiroki Abe, Toshiyuki FUJII, Susumu ONAKA, Masaharu KATO. Relationship between mechanical properties and microstructure in ultrafine-grained Cu-Si alloy processed by accumulative roll bonding, International Workshop on Bulk Nanostructured Metals, 2012.
• Satoshi Hata, M. Shimizu, R. Akiyoshi, M. Mitsuhara, Ken-ichi Ikeda, Y. Miyajima, H. Nakashima, M. Kato. Electron Tomography Observation of Dislocations Near a Symmetric Tilt Boundary in a Deformed Mo Bicrystal, The 5th International Symposium on Designing, Processing and Properties of Advanced Engineering Materials, 2012.
• Yoji MIYAJIMA, Midori Uchiyama, TOSHIYUKI FUJII, Susumu ONAKA, Masaharu KATO. Effect of additional shear stress on texture evolution during ARB process, International Workshop on Bulk Nanostructured Metals, Materials Transactions, 2012.
• Akari Yoshida, Yoji Miyajima, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Microstructural evolution caused by accumulative roll-bonding of Cu (100)[001] single crystals, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM-2010), p. 106, Nov. 2010.
• Takako Sumiya, TOSHIYUKI FUJII, Hisashi Sato, Yoshimi Watanabe, SUSUMU ONAKA, MASAHARU KATO. Suppression of grain growth by precipitation of Co-Fe particles during aging of an ECAPed Cu alloy, Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM-2010), p. 105, Nov. 2010.
• Yukito Nakanishi, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato. Formation of Dislocation Structure during Cyclic Deformation of Ultrafine-Grained Aluminum at Low Temperatures, 12th International Conference on Aluminium Alloys, Proceedings of the 12th International Conference on Aluminium Alloys, pp. 326-331, Sept. 2010.
• Toshiyuki Fujii, Hiroshi Kamio, Yoshifumi Sugisawa, Susumu Onaka, Masaharu Kato. Cyclic Softening of Cu-Ni-Si Alloy Single Crystals under Low-Cycle Fatigue, 7th Pacific Rim International Conference on Advanced Materials and Processing, Materials Science Forum, Vol. 654-656, pp. 1287-1290, Aug. 2010.
• Chiharu Kanno, Kenji Aoyagi, TOSHIYUKI FUJII, Susumu Onaka, Masaharu Kato. Shape evolution and arrangement of fcc Co-Fe precipitate particles during coarsening in a Cu matrix, Solid-Solid Phase Transformations in Inorganic Materials (PTM2010), PTM2010, June 2010.
• Tomotaka Miyazawa, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato. Shape and Elastic State of Nano-sized Ag Precipitates in a Cu-Ag Single Crystal, 13th International Conference on Intergranular and Interphase Boundaries in Materials, Proceedings of the 13th International Conference on Intergranular and Interphase Boundaries in Materials, 106, June 2010.
• Takahiro Kunimine, Toshiyuki Fujii, Susumu Onaka, Nobuhiro Tsuji, Masaharu Kato. Effects of Si Addition on Mechanical Properties of Copper Severely Deformed by Accumulative Roll-Bonding, 13th International Conference on Intergranular and Interphase Boundaries in Materials, Proceedings of the 13th International Conference on Intergranular and Interphase Boundaries in Materials, 102, June 2010.
• Masaharu Kato, Takahiro Kunimine, Toshiyuki Fujii, Susumu Onaka. Role of Dislocations Emitted from Grain Boundaries on Plastic Deformation of Ultrafine-grained Materials, 13th International Conference on Intergranular and Interphase Boundaries in Materials, Proceedings of the 13th International Conference on Intergranular and Interphase Boundaries in Materials, 54, June 2010.
• Chiharu Kanno, TOSHIYUKI FUJII, SUSUMU ONAKA, MASAHARU KATO. Effects of magnetic field on solid solubility of Fe and Co in a Cu matrix, 6th International Conference on Electromagnetic Processing of Materials, Proceedings of the 6th International Conference on Electromagnetic Processing of Materials, pp. 777-779, Oct. 2009.
• Ryuichirou Shima, Chiharu Kanno, Toshiyuki Fujii, Hideyuki Ohtsuka, Susumu Onaka, Masaharu Kato. Effects of magnetic field on variant selection of bcc Fe-Co particles in a Cu matrix, the 6th International Conference on Electromagnetic Processing of Materials, Proceedings of the 6th International Conference on Electromagnetic Processing of Materials, pp. 769-772, Oct. 2009.
• H. Miura, T. Sakai, M. Kato. Cyclic creep and fracture of Cu-SiO2 bicrystals at an intermediate temperature of 673 K, Materials Science and Engineering A, Vol. 510-511, pp. 413-416, 2009.
• MASAHARU KATO. Thermal Activation Process during Dislocation bow out at a Grain Boundary in Nanocrystals and Ultra-fine-Grained Materials, International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008), Fukuoka, Japan, pp. 10-11, Nov. 2008.
• Yoji Furukawa, Toshiyuki Fujii, Susumu Onaka, Masaharu Kato. Cyclic Deformation Behavior of Ultra-Fine Grained Copper Produced by Equal Channel Angular Pressing, International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008), Fukuoka, Japan, pp. 36-37, Nov. 2008.
• Toshiyuki Fujii, Shizuma Uju, Hiroyuki Tanaka, Toru Murayama, Chihiro Watanabe, Susumu Onaka, Masaharu Kato. Relationship between Dislocation Microstructure and Flow Stress during Cyclic Deformation in Al single Crystals, Proceedings of the Hael Mughrabi Honorary Symposium, pp. 123-127, Mar. 2008.
• T. Fujii, S. Uju, H. Tanaka, T. Murayama, C. Watanabe, S. Onaka, M. Kato. Relationship between Dislocation Microstructure and Flow Stress during Cyclic Deformation in Al Single Crystals, Plasticity, Failure and Fatigue in Structural Materials from Macro to Nano: Proceedings of the Hael Mughrabi Honorary Symposium, edit. by K. J. Hsia, M. Guen, T. Pollock, P. D. Portella and N. R. Moody, The Minerals, Metals & Materials Society, pp. 123-127, 2008.
• T. Fujii, S. Uju, C. Watanabe, S. Onaka, M. Kato. Cyclic Deformation of Al-Mg Single Crystals with a Single Slip Orientation, Materials Science Forum, Vol. 561-565, pp. 2213-2216, Oct. 2007.
• Toshiyuki Fujii, Shizuma Uju, Chihiro Watanabe, Susumu Onaka, Masaharu Kato. Cyclic Deformation of Al-Mg Single Crystals with a Single Slip Orientation, The Sixth Pacific Rim International Conference on Advanced Materials and Processing, Materials Science Forum, Vol. 561-565, pp. 2213-2216, July 2007.
• M. KATO, T. Fujii, S. Onaka. Interface Character and Crystallography and Morphology of Second-Phase Particles, Nano-Interface Mechanics Workshop, Nanotechnology Researchers Network Center of Japan, Tokyo, pp. 30, 2004.
• TOSHIYUKI FUJII, T. Tamura, MASAHARU KATO, SUSUMU ONAKA. Size-Dependent Equilibrium Shape of Co-Cr Particles in Cu, Microscopy & Microanalysis, Vol. 8, No. s, pp. 1434-1435, Aug. 2002.
• H. Sato, T. Murase, T. Fujii, S. Onaka, M. Kato, Y. Watanabe. Formation of the Fine Al₃Ti Fibers near the Worn Surface of the Al Alloy Containing Large Al₃Ti Dispersoids, Proceedings of the 2nd International Conference on Advanced Fiber/Textiles 2002 in Ueda, pp. 91, 2002.
• TOSHIYUKI FUJII, Hideo Niwa, Masaharu kato. Epitaxy of Deposit Al and Cu Films on Si Substrates, 8th Japan Institute of Metals International Symposium, Proceedings of 8th Japan Institute of Metals International Symposium, Interface Science and materials Interconnection, Tateyama, The Japan Institute of Metals, pp. 307-310, July 1996.
• Toshiyuki Fujii, Toshifumi Abe, Shingo Inoue, Masaharu Kato. Epitaxy of Deposited α-Fe Films on High-Index Cu Substrate Planes, iib95, Materials Science Forum, Vol. 207-209, No. 1, pp. 233-236, July 1996.
• T. Yoshida, H. Umaki, M. Nakashiro, T. Fujii, K. Tomita, M. Kato. High-Temperature Fatigue Life Assessment of 2.25Cr-1Mo Steel by Microstructural Observations, I Mech E Conference Transactions, Vol. 2, pp. 165-174, Apr. 1996.
• K. Mukherjee, M. Kato. Lattice Correspondence and Crystallography of Martensites in Titanium Alloys, Journal de Phsyque, Colloque C4, Vol. 43, No. 12, pp. 297-302, 1982.
• M. Kato, T. Miyazaki, Y. Sunaga. Re-Examination of the Minimization of Elastic Energy and the Phenomenological Crystallographic Theory in a Martensitic Transformation, Scripta Metallurgica, Vol. 11, No. 11, pp. 915-919, 1977.
• M. Kato, T. Mori. Stress-Induced Martensite in Fe-23%Ni-5%Cr Alloy Single Crystals, Proceedings of the 1st JIM Internatinal Symposium on New Aspects of Martensitic Transformations, Proceedings of the 1st JIM Internatinal Symposium on New Aspects of Martensitic Transformations, pp. 333-338, 1976.

国内会議発表 (査読有り)

• 雨宮 雄太郎, 中田 伸生, 諸岡 聡, 小坂 誠, 加藤 雅治. (俵論文賞受賞講演)パーライトにおける内部応力の動的緩和と結晶方位関係の選択, 日本鉄鋼協会春季講演大会, Mar. 2021.  公式リンク  
  
• 中田伸生, 加藤雅治. パーライトにおけるフェライト／セメンタイト間の結晶方位選択に関する弾性論的考察, 日本鉄鋼協会第173回春季講演大, Mar. 2017.
• 加藤雅治. 材料強度と熱活性化変形過程に関する若干の考察（第59回本多記念講演）, 日本金属学会春期講演大会, まてりあ, 日本金属学会, Vol. 53, No. 5, pp. 209-214, May 2014.
• 加藤雅治. 強化機構の基礎理解, 西山記念技術講座, 第199回西山記念技術講座テキスト，「次世代につなぐ鉄鋼学の展望II」, 日本鉄鋼協会, pp. 37-60, Oct. 2009.

国際会議発表 (査読なし・不明)

• Takahiro Kunimine, Naoki Takata, Nobuhiro Tsuji, Toshiyuki Fujii, Masaharu Kato, Susumu Onaka. Temperature and Strain Rate Dependence of Flow Stress in Severely Deformed Copper by Accumulative Roll Bonding, International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008), Abstract of the International Symposium on Giant Straining Process for Advanced Materials (GSAM-2008), pp. 72-73, Nov. 2008.  公式リンク  
  

国内会議発表 (査読なし・不明)

• 宮嶋陽司, 福田晃二郎, 足立大樹, 尾中晋, 加藤雅治. 巨大ひずみ加工を用いたアルミニウムの結晶粒超微細化に及ぼす鉄添加の効果, 日本軽金属学会秋期講演大会, Nov. 2016.
• 宮嶋陽司, 海住亮太, 尾中晋, 加藤雅治. 超微細粒Al-Mg合金における温度77Kから323Kでの熱活性化変形過程, 日本金属学会秋期講演大会, Sept. 2016.
• 中田伸生, 加藤雅治. パーライト組織中の内部応力に関する弾性論的考察, 日本鉄鋼協会 第170 回秋季講演大会, Sept. 2015.  公式リンク  
  
• 大久保 智, 宮澤 知孝, 宮嶋 陽司, 足立 大樹, 藤居 俊之, 尾中 晋, 加藤 雅治. 超微細粒Cuにおける引張変形中の転位密度変化, 2014年秋期講演大会(第155回), 日本金属学会講演概要, 公益社団法人 日本金属学会, Sept. 2014.
• 齋藤 遼太, 冠 和樹, 宮嶋 陽司, 宮澤 知孝, 藤居 俊之, 加藤 雅治. Cu-Ag 合金箔の繰り返し変形に伴う転位組織の発達過程, 2014年秋期講演大会(第155回), 日本金属学会講演概要, 公益社団法人 日本金属学会, Sept. 2014.
• 齋藤 実奈子, 宮嶋 陽司, 宮澤 知孝, 藤居 俊之, 加藤 雅治. Fe析出粒子を含むCu合金の巨大ひずみ加工による組織変化, 2014年秋期講演大会(第155回), 日本金属学会講演概要, 公益社団法人 日本金属学会, Sept. 2014.

その他の論文・著書など

• 加藤雅治. 先輩研究者・技術者からのエール, ふぇらむ, Vol. 17, No. 4, p. 39, Apr. 2012.
• 菅野千晴, 藤居俊之, 大塚秀幸, 尾中晋, 加藤雅治. Cu母相中におけるFe-Co粒子の成長に及ぼす外部磁場効果, 金属, Vol. 80, No. 5, pp. 354-360, May 2010.
• 加藤雅治. 材料強度学とその周辺 VI ー演習問題解答と応用ー, まてりあ, Vol. 47, No. 9, pp. 513-518, Oct. 2008.
• 加藤雅治. 材料強度学とその周辺 V ー高温変形，疲労，破壊ー, まてりあ, Vol. 47, No. 9, pp. 469-474, Sept. 2008.
• 菅野千晴, 尾中晋, 加藤雅治, 藤居俊之, 大塚秀幸. Cu母相中のfcc Fe-Co粒子の形状変化に及ぼす外部磁場効果, 物質・材料研究機構強磁場共用ステーション2007年度成果報告書, pp. 89-90, Sept. 2008.
• 加藤雅治. 材料科学の未踏領域 −サブミクロンの世界 −, 電気製鋼, Vol. 79, No. 3, pp. 175-176, Aug. 2008.
• 加藤雅治. 材料強度学とその周辺 IV ー転位論，降伏と強化機構ー, まてりあ, Vol. 47, No. 8, pp. 418-422, Aug. 2008.
• 安宅勝弘, 影山任佐, 高山潤也, 齋藤憲司, 加藤雅治, 粥川裕平, 佐藤武. 大学院における休学・退学・留年学生に関する調査ー第5報（平成18年度集計結果）ー, 国立大学法人保健管理施設協議会メンタルヘルス委員会「大学院生実態調査」研究班報告書, Aug. 2008.
• 加藤雅治. 材料強度学とその周辺 III ーマイクロメカニックスの基礎ー, まてりあ, Vol. 47, No. 7, pp. 375-380, July 2008.
• 加藤雅治. 材料強度学とその周辺 II ー変形の熱力学と速度論ー, まてりあ, Vol. 47, No. 6, pp. 317-322, June 2008.
• 加藤雅治. 材料強度学とその周辺 I ーひずみ・応力と線形弾性論ー, まてりあ, Vol. 47, No. 5, pp. 256-261, May 2008.
• 安宅勝弘, 影山任佐, 高山潤也, 斎藤憲司, 加藤雅治, 粥川裕平, 佐藤武. 大学院における休学・退学・留年学生に関する調査ー第4報（平成17年度集計結果）ー, 国立大学法人保健管理施設協議会メンタルヘルス委員会「大学院生実態調査」研究班報告書, June 2007.
• 藤居俊之, 尾中晋, 加藤雅治. 丘の上に棲むかものはし, ふぇらむ, Vol. 11, No. 9, pp. 589, Sept. 2006.
• 安宅勝弘, 影山任佐, 高山潤也, 齋藤憲司, 加藤雅治, 粥川裕平, 佐藤武. 大学院における休学・退学・留年学生に関する調査ー第3報（平成16年度集計結果）ー, 国立大学法人保健管理施設協議会メンタルヘルス委員会「大学院生実態調査」研究班報告書, May 2006.
• 藤居俊之, 加藤雅治, 山田隆之, 二森茂樹, 大塚秀幸. Cu単結晶中におけるFe-Co粒子のfcc→bcc磁場誘起マルテンサイト変態, 日本鉄鋼協会「強磁場を利用した鉄鋼材料の組織制御研究会」, pp. 153-160, Mar. 2006.
• 藤居俊之, 加藤雅治, 山田隆之, 二森茂樹, 大塚秀幸. Cu単結晶中におけるFe-Co粒子のfcc→bcc磁場誘起マルテンサイト変態, 強磁場を利用した鉄鋼材料の組織制御研究会報告書, 日本鉄鋼協会, pp. 153-160, 2006.
• 藤居俊之, 尾中晋, 加藤雅治, 渡邊千尋, 冠和樹, 澤渡直樹, 村山徹. CuおよびAl単結晶の繰り返し変形に伴う転位組織発達過程, まてりあ, Vol. 43, No. 12, pp. 1028, Dec. 2004.
• 藤居俊之, 尾中晋, 加藤雅治. エネルギー論による転位上優先析出の理解, まてりあ, Vol. 43, No. 11, pp. 925-930, Nov. 2004.
• 藤居俊之, 山田隆之, 加藤雅治, 二森茂樹, 大塚秀幸. Cu単結晶中の Fe-Co粒子の磁場誘起マルテンサイト変態, 物質・材料研究機構強磁場研究センター2003年度年次報告書, pp. 119-121, Sept. 2004.
• 加藤雅治. やさしい材料強度学（第7回）－材料の強さを理解する－, 熱処理, Vol. 43, No. 1, pp. 18-24, 2003.
• 藤居俊之, 加藤智紹, 山田隆之, 加藤雅治, 二森茂樹, 大塚秀幸. Cu中に析出したFe-Co粒子の磁場誘起マルテンサイト変態, 物質・材料研究機構強磁場センター2001年度年次報告書, pp. 116-117, Sept. 2002.
• 藤居俊之, 冨田和秀, 吉田隆, 中代雅士, 加藤雅治. 2.25Cr-1Mo鋼の内部組織観察による高温疲労損傷評価, 日本金属学会分科会シンポジウム「疲労破壊機構解明のための組織学的アプローチ」, 日本金属学会, pp. 21-24, Jan. 1996.
• M. Kato, M. Wada, A. Sato, T. Mori. Epitaxy of Cubic Crystals on (001)Cubic Substrates, Acta Metallurgica, Vol. 37, No. 3, pp. 749-756, 1989.
• 佐藤彰一, 加藤雅治. 相変態・析出におよぼす応力の影響, 鉄と鋼, Vol. 69, No. 14, pp. 1531-1539, 1983.

学位論文

• Lattice Deformation and Elastic State Associated with F.C.C. to B.C.C. Martensitic Transformation in Iron Alloys,  Thesis,  Doctor of Engineering,  Tokyo Institute of Technology,  1978/03/26,   
• Fe-23Ni-5Cr合金単結晶の応力誘発マルテンサイト変態,  Master of Engineering,  Tokyo Institute of Technology,  1975/--/--, 

[ BibTeX 形式で保存 ]    [ 論文・著書をCSV形式で保存 ]    [ 特許をCSV形式で保存 ]