|
武田行生 2019年 研究業績一覧 (40件 / 495件)
論文
-
Xinghai Liang,
Yukio Takeda.
An iterative method for the inverse kinematics of lower-mobility parallel mechanism with three RS or SR chains based on kinematically equivalent mechanism,
Mechanism and Machine Theory,
Volume 141,
Page 40-51,
Nov. 2019.
-
Xinghai Liang,
Yukio Takeda.
Transmission Index of a Class of Parallel Manipulators with 3-RS(SR) Primary Structures Based on Pressure Angle and Equivalent Mechanism with 2-SS Chains Replacing RS Chain,
Mechanism and Machine Theory,
Volume 139,
Page 359-378,
Sept. 2019.
-
松尾 博史,
松浦 大輔,
菅原 雄介,
武田 行生.
部材の干渉と変形を考慮したOrigami Springの実挙動の機構学的考察,
日本機械学会論文集,
Vol. 85,
No. 873,
Apr. 2019.
-
Rasheed Kittinanthapanya,
Yusuke Sugahara,
Daisuke Matsuura,
Yukio Takeda.
Development of a Novel SMA-Driven Compliant Rotary Actuator Based on a Double Helical Structure,
Robotics,
Vol. 8,
No. 1,
12,
Feb. 2019.
公式リンク
著書
国際会議発表 (査読有り)
-
Yusuke Sugahara,
Kohei Tsukamoto,
Mitsuru Endo,
Jun Okamoto,
Daisuke Matsuura,
Yukio Takeda.
A Multi-DOF Human-Powered Robot Using Regenerative Clutches and Constant-Force Springs,
IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2019),
Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS2019),
pp. 4593-4599,
Nov. 2019.
-
Woo-hyeok Choi,
Yukio Takeda.
Kinematic Analysis of (2-RRU)-URR Parallel Mechanism Performing 2R1T Output Motion,
ISRM2019 International Symposium on Robotics and Mechatronics,
Mechanisms and Machine Science,
Springer,
vol. 78,
pp. 114–124,
Oct. 2019.
-
Quang Huan Luong,
Jeremy Jong,
Yusuke Sugahara,
Daisuke Matsuura,
Yukio Takeda.
A 3-Dimensional Dynamic Model of the Aerotrain and the Horizontal Tail Effect on the Longitudinal Stability,
ISRM2019 International Symposium on Robotics and Mechatronics,
Mechanisms and Machine Science,
Springer,
vol. 78,
pp. 189-202,
Oct. 2019.
-
Ying-Chi Liu,
Yukio Takeda.
Kineto-static Analysis of a Wrist Rehabilitation Robot with Compliant Elements and Supplementary Passive Joints to Compensate the Joint Misalignment,
The 2nd International Jc-IFToMM Symposium,
Oct. 2019.
-
Hiroshi Matsuo,
YUKIO TAKEDA.
Improvement of an Origami Based Extendable Mechanism with a Modification of Folding Diagram,
The 2nd International Jc-IFToMM symposium,
Proceedings of the 2nd International Jc-IFToMM symposium,
Oct. 2019.
-
Santosh Maurya,
Daisuke Matsuura,
Takahiro Uehara,
Masato Kawabata,
Yukio Takeda.
Addressing communication issue among caregivers and wheelchair users: identifying design metrics and defining needs,
AAATE 2019 - Global Challenges in Assistive Technology: Research, Policy & Practice,
Aug. 2019.
-
Santosh Maurya,
YUKIO TAKEDA,
Celine Mougenot.
Enabling Designers to Generate Concepts of Interactive Product Behaviours: A Mixed Reality Design Approach,
International Conference on Engineering Design,
Proceedings of the Design Society: International Conference on Engineering Design,
July 2019.
公式リンク
-
Rasheed Kittinanthapanya,
Yusuke Sugahara,
Daisuke Matsuura,
Yukio Takeda.
Modeling and Characterization of the Double Helical Compliant Joint,
the Fifth IFToMM International Symposium on Robotics and Mechatronics (ISRM2017),
Robotics and Mechatronics. Proceeding of the Fifth IFToMM International Symposium on Robotics and Mechatronics (ISRM2017). Mechanisms and Machine Science, vol 72,
Springer, Cham,
pp. 209-224,
July 2019.
-
Matteo Russo,
Ceccarelli M.,
Takeda Y..
Comparison of Motion/Force Transmissibility in a 3-SPR Parallel Manipulator and a 6-SPS Equivalent Mechanism,
Robotics and Mechatronics. Proceeding of the Fifth IFToMM International Symposium on Robotics & Mechatronics (ISRM 2017). Mechanisms and Machine Science, vol 72,
Springer, Cham,
pp. 119-129,
July 2019.
-
Brinker J.,
Corves B.,
Takeda Y..
Kinematic and Dynamic Dimensional Synthesis of Extended Delta Parallel Robots,
Robotics and Mechatronics. Proceeding of the Fifth IFToMM International Symposium on Robotics & Mechatronics (ISRM 2017). Mechanisms and Machine Science, vol 72,
Springer, Cham,
pp. 131-143,
July 2019.
-
Kuo CH.,
Matsuura D.,
Takeda Y..
A 7R Spatial Linkage for Ankle Rehabilitation with an Arbitrary Ankle Rotation Axis,
The 15th IFToMM World Congress,
Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73,
Springer, Cham,
pp. 1491-1498,
June 2019.
-
Mohanta J.K.,
Mohan S.,
Takeda Y.,
Corves B..
Adaptive Backstepping Motion Control of a New Sitting-type Lower Limb Rehabilitation Robot,
The 15th IFToMM World Congress,
Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73,
Springer, Cham,
pp. 2761-2768,
June 2019.
-
Matsuo H.,
Matsuura D.,
Sugahara Y.,
Takeda Y..
Modeling and Displacement Analysis of Origami Spring Considering Collision and Deformation of Components,
The 15th IFToMM World Congress,
Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science, vol 73,
Springer, Cham,
pp. 329-336,
June 2019.
-
Matsuura D.,
Ueki T.,
Sugahara Y.,
Yoshida M.,
Takeda Y..
Reproduction of Long-Period Ground Motion by Cable Driven Earthquake Simulator Based on Computed Torque Method,
Fourth International Conference on Cable-Driven Parallel Robots (CableCon 2019),
Pott A., Bruckmann T. (eds) Cable-Driven Parallel Robots. CableCon 2019. Mechanisms and Machine Science, vol 74,
Springer, Cham,
pp. 415-424,
June 2019.
-
Masumi Ohno,
YUKIO TAKEDA.
Trajectory Design Based on Joint Impact Index for Detecting Joint Clearance in Parallel Robot,
The 15th IFToMM World Congress,
Advances in Mechanism and Machine Science. IFToMM WC 2019. Mechanisms and Machine Science,
Springer, Cham,
Vol. 73,
June 2019.
国内会議発表 (査読有り)
国際会議発表 (査読なし・不明)
-
松田聡一郎,
武田行生.
ダイナミックペアを適用したモデルを使用した高齢者の杖歩行の動力学解析,
The 25th Jc-IFToMM Symposium 2019 (2nd International Jc-IFToMM Symposium),
Proceedings of The Second International Jc-IFToMM Symposium,
pp. 63-70,
Oct. 2019.
-
Christian Mirz,
Danimir Doncevic,
Mathias Huesing,
Burkhard Corves,
Yukio Takeda.
Design Optimization of an Energy-Efficient Five-Bar Linkage Manipulator,
13. Kolloquium Getriebetechnik,
13. Kolloquium Getriebetechnik,
Logos Verlag Berlin,
pp. 269-278,
Sept. 2019.
-
Yukio TAKEDA.
Introduction of research activity in Mechanical Systems Design Laboratory in Tokyo Institute of Technology: Kinematic design of assistive devices and parallel robots,
13. Kolloquium Getriebetechnik,
13. Kolloquium Getriebetechnik,
Logos Verlag Berlin,
pp. 279-286,
Sept. 2019.
国内会議発表 (査読なし・不明)
-
西畑智道,
二瓶美里,
鎌田実,
菅原雄介,
松浦大輔,
武田行生,
金天海,
遠藤央.
力学系学習木を用いたノンホロノミック車両のための人ー機械協調学習操作系の開発,
第20回計測自動制御学会システムインテグレーション部門講演会,
Dec. 2019.
-
西畑智道,
二瓶美里,
鎌田実,
菅原雄介,
松浦大輔,
武田行生,
金天海,
遠藤央.
力学系学習木を用いたノンホロノミック車両のための人―機械協調学習操作系の開発―人の運動学習段階や学習能力に適応したシステムの提案―,
第20回計測自動制御学会システムインテグレーション部門講演会(SI2019),
計測自動制御学会システムインテグレーション部門講演会予稿集,
公益社団法人計測自動制御学会,
pp. 2212-2215,
Dec. 2019.
-
岡朋宏,
Jorge Solis,
Ann-Louise Lindborg,
松浦大輔,
菅原雄介,
武田行生.
把持対象物の弾性を考慮した劣駆動箸型グリッパの力学解析と把持計画,
第37回日本ロボット学会学術講演会,
第37回 日本ロボット学会学術講演会講演概要集,
一般社団法人日本ロボット学会,
2M2-05,
Sept. 2019.
-
松尾博史,
安東零司,
松浦大輔,
菅原雄介,
勅使河原誠一,
H. Harry Asada,
武田行生.
Origami Spring を応用した大曲率形状を出力可能な伸縮アームの開発,
第37回日本ロボット学会学術講演会,
第37回 日本ロボット学会学術講演会講演概要集,
一般社団法人日本ロボット学会,
3E3-03,
Sept. 2019.
-
Andres OSORIO,
Asitha KULASEKERA,
Yusuke SUGAHARA,
Daisuke MATSUURA,
Yukio TAKEDA.
A novel scalable SMA actuator using thermally conductive fluid: Its concept and basic characterization,
第37回日本ロボット学会学術講演会,
第37回 日本ロボット学会学術講演会講演概要集,
The Robotics Society of Japan,
2F1-06,
Sept. 2019.
-
塚本航平,
菅原雄介,
松浦大輔,
武田行生,
遠藤央,
岡本淳.
人力ロボティクスの研究(第11報,回生クラッチと定荷重ばねを用いた2自由度人力ロボット),
第37回日本ロボット学会学術講演会,
第37回 日本ロボット学会学術講演会講演概要集,
一般社団法人日本ロボット学会,
1E2-03,
Sept. 2019.
-
菅原雄介,
島悠貴,
松浦大輔,
武田行生,
二瓶美里,
佐久間菜月,
西畑智道,
鎌田実,
遠藤央.
高齢者向けハンズフリーモビリティのためのペダリング運動負荷システム,
LIFE2019,
LIFE2019,
一般社団法人日本機械学会,
OS10-2-4,
Sept. 2019.
-
武田 行生,
菅原 雄介,
松浦 大輔,
松田 聡一郎,
鈴木 智行,
北川 雅隆,
LIU Ying-Chi.
ダイナミックペアに基づく装着形動作支援装置のモデル化と運動力学解析,
日本機械学会2019年度年次大会,
日本機械学会2019年度年次大会講演論文集,
Sept. 2019.
-
Ying-Chi Liu,
Yukio Takeda.
Static Analysis of a Wrist Rehabilitation Robot with Consideration to the Compliance and Joint Misalignment Between the Robot and Human Hand,
The 37th Annual Conference of the Robotics Society of Japan,
第37回 日本ロボット学会学術講演会講演概要集, 一般社団法人日本ロボット学会, 1F3-05,
Sept. 2019.
-
南雲周,
有尾知朗,
松浦大輔,
菅原雄介,
武田行生.
非接触磁気駆動されるマイクロ弾性グリッパの解析,設計と製作,
2019年度精密工学会秋季大会学術講演会,
2019年度精密工学会秋季大会学術講演会講演論文集,
Sept. 2019.
-
Randy Raharja Sudiono,
Yusuke Sugahara,
Mitsuru Endo,
Daisuke Matsuura,
Yukio Takeda.
Cable Traversing Robots on Spatially Structured Cableway for Reconfigurable Parallel Cable System,
The Robotics and Mechatronics Conference 2019,
日本機械学会ロボティクス・メカトロニクス講演会2019予稿集,
Japan Society of Mechanical Engineers,
1A1-S02,
June 2019.
その他の論文・著書など
特許など
-
菅原雄介,
石井貴大,
武田行生,
松浦大輔,
松本 壮史,
垣尾 政之,
中澤 大輔.
搬送装置.
特許.
登録.
国立大学法人東京工業大学, 三菱電機株式会社.
2019/08/27.
特願2021-541850.
特許第7156545号.
2022/10/11
2022.
-
菅原雄介,
武田行生,
松浦大輔,
石井貴大,
松本 壮史,
垣尾 政之,
中澤 大輔.
搬送装置.
特許.
公開.
国立大学法人東京工業大学, 三菱電機株式会社.
2019/08/27.
PCT/JP2019/033579.
2021/03/04.
WO 2021/038731.
2021.
Mar.
-
菅原雄介,
Randy Raharja SUDIONO,
武田行生,
松浦大輔,
片村 立太,
岡 尚人,
柳田 克巳,
古賀 達雄,
水谷 亮,
三谷 哲史.
自走装置及びパラレルワイヤ機構.
特許.
登録.
国立大学法人東京工業大学, 鹿島建設株式会社.
2019/06/03.
特願2019-103977.
2020/12/10.
特開2020-196589.
特許第7198455号.
2022/12/21
2022.
-
武田行生,
大野真澄,
安部 健一郎,
山城 光,
松井 英生,
中川 浩,
有田 創一.
ロボットのジョイントの異常検出装置及び異常検出方法
.
特許.
登録.
国立大学法人東京工業大学, ファナック株式会社.
2019/03/08.
特願2019-043183.
2020/09/10.
特開2020-142353.
特許第7117697号.
2022/08/04
2022.
-
武田行生,
大野真澄,
安部 健一郎,
呉 允鋒,
山城 光,
松井 秀生,
有田 創一,
中川 浩.
ロボットのジョイントの異常検出装置及び異常検出方法.
特許.
登録.
国立大学法人東京工業大学, ファナック株式会社.
2018/02/14.
特願2018-024055.
2019/08/22.
特開2019-136838.
特許第6846717号.
2021/03/04
2021.
[ BibTeX 形式で保存 ]
[ 論文・著書をCSV形式で保存
]
[ 特許をCSV形式で保存
]
|